Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

First Article Test (FAT) and Material Validation Services

Open

Federal

Response Deadline11/17/2026, 11:00:00 AM CST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for First Article Test and Material Validation Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves performing material validation and First Article Testing, specifically focusing on hardness testing per HIM-1 Code 1 and braze inspections per VIS-4 for Air Force Critical Safety Items. The contractor will utilize specialized NDT and hardness testing equipment to validate manufacturing processes. The final deliverables include comprehensive FAT test reports and three validated units to be delivered to Tinker AFB for government approval. This effort is managed under the Department of Defense for the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located at Tinker AFB, Oklahoma.

General Info

Material validation and First Article Testing for DLA Weapons Support at Tinker AFB.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

NAICS

541380 - Testing Laboratories and Services

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-27-T-3592.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

NOZZLE, LUBRICATING,

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 9

subcontract

Response DeadlineNov 17

Submission deadline

Response Deadline

11/17/2026, 11:00:00 AM CSTin 7 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs First Article Testing (FAT) and material validation for prime contractors on DLA Weapons Support ASC projects. Executes hardness testing per HIM-1 Code 1 and braze inspections per VIS-4 for Air Force Critical Safety Items. Utilizes NDT and hardness testing equipment to validate manufacturing processes. Delivers FAT test reports and three validated units to Tinker AFB for government approval.

Similar Contracts

Same NAICS industry code

Concrete Testing and InspectionThis subcontract for Concrete Testing and Inspection involves providing independent testing and inspection services for prime contractors working on California Department of Corrections and Rehabilitation facility projects. The scope of work includes conducting design mixture reviews, verifying curing methods, and performing field tests for slump, air content, and strength. All field sampling and compression testing must be executed in accordance with ACI and ASTM standards to ensure structural integrity. The selected provider is responsible for delivering comprehensive certified testing reports and detailed inspection documentation. This opportunity falls under NAICS code 541380 and is associated with the state of California. Interested parties should note the solicitation timeline and the requirement for strict adherence to industry standards for all concrete quality assurance activities.

California Department of Corrections & Rehabilitation

POSTED

about 6 hours ago

DEADLINE

in about 18 hours

Testing, Adjusting, and Balancing (TAB)This subcontract for Testing, Adjusting, and Balancing (TAB) involves providing independent air balancing and testing services for prime contractors working on municipal projects for the Town of Stratford. The selected provider is responsible for conducting system verification in strict accordance with AABC or NEBB procedures to ensure operational efficiency and compliance. Managed by DAS Procurement for the state of Connecticut, the contract requires the delivery of a certified Air Balancing Report no later than four weeks before the completion of each project. Interested parties must submit their responses by the deadline of December 17, 2026.

DAS Procurement

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Material Testing ServicesThis subcontract for Material Testing Services involves providing field inspection, testing, adjusting, and balancing for prime contractors working on park projects for the Columbus Consolidated Government in Georgia. The scope of work focuses on delivering essential testing laboratory services for soil, concrete, and asphalt to verify that all materials meet project specifications, concluding with the delivery of certified test reports. The opportunity is categorized under NAICS code 541380 and was posted on November 10, 2026. Interested parties must submit their responses by the deadline of December 16, 2026.

Columbus Consolidated Government

POSTED

about 9 hours ago

DEADLINE

in about 1 month

Certified Water Quality Sampling and Laboratory AnalysisThis subcontract for the State of Idaho involves providing certified water quality sampling and laboratory analysis for prime contractors working on Department of Correction facility projects. The scope of work focuses on ensuring drinking water safety through bacteriological sampling for coliform and chemical analysis for chlorine residuals, all performed in accordance with Idaho DEQ and EPA standards. The selected provider must utilize state-certified laboratory facilities to conduct these tests and deliver official Water Quality Laboratory Reports. This opportunity falls under NAICS code 541380, with a response deadline set for November 24, 2026.

POSTED

about 9 hours ago

DEADLINE

BCL27*393919-Wisconsin State Profiicency Test-QM

Solicitation # SRC0000037638

The solicitation BCL27*393919 for the Wisconsin State Proficiency Test-QM is issued by the Clinical Laboratory Services agency in Alabama. This procurement is managed through the Alabama Buys portal, with a response deadline of November 18, 2026. The contract has an estimated value not to exceed $25,000 and allows for annual renewals for a total period of up to five years from the effective date. Performance is based in Alabama, and the State of Alabama maintains the right to inspect all products under the Universal Commerce Code before acceptance, noting that a delivery signature does not constitute final acceptance. Suppliers must adhere to strict legal and administrative requirements, including certification of non-collusion, registration with the Alabama Secretary of State for out-of-state entities, and compliance with the Beason-Hammon Act regarding the employment of unauthorized aliens. Enrollment in the E-Verify program is mandatory for suppliers with employees in Alabama. Additionally, contracts exceeding $25,000 require a Disclosure Statement filed pursuant to the Code of Alabama. Payment is handled electronically via state-issued credit cards, P-cards, or EFT, and all bids must include certification of registration and remittance of Alabama state and local sales, use, and lease taxes.

Clinical Laboratory Services

POSTED

about 9 hours ago

DEADLINE

RFP-2026-ENG-159

Solicitation # 49523

Solicitation RFP-2026-ENG-159 is a request for proposals issued by the Louisiana CPPJ Purchasing agency for emergency traffic control device monitoring and inspection services. This SLED organization project falls under NAICS code 541380 and requires performance within the state of Louisiana. Interested parties must submit their responses by the deadline of December 8, 2026, at 9:00 PM. Further details and submission guidelines can be accessed through the provided Bid Express portal using solicitation number 49523.

CPPJ Purchasing - Commodities / Services

POSTED

about 9 hours ago

DEADLINE

Geological and Integrity LoggingThis subcontract for Geological and Integrity Logging supports prime contractors on orphan well projects managed by the Ohio Department of Natural Resources. The scope of work involves performing comprehensive borehole logging, which includes loading holes with freshwater and utilizing specialized tools and software to run Gamma Ray, CCL, Temperature, Bond, and Caliper logs. These processes are essential for verifying geological formations, casing depth, cement bond quality, and hole diameter. The contractor is responsible for delivering detailed logging reports and data used to determine final cement plug depths. This opportunity falls under NAICS code 541380 and is associated with the Ohio Department of Natural Resources Oil and Gas division. Interested parties must submit their responses by the deadline of December 3, 2026.

Dnr900200 Oil And Gas Dnrfra

POSTED

about 9 hours ago

DEADLINE

V&V and Factory Acceptance Testing (FAT)This subcontract for BC Rapid Transit (Skytrain) involves the development and execution of comprehensive testing programs for prime contractors. The scope of work focuses on performing qualification test programs, Factory Acceptance Tests, and vehicle integration methodology. These tasks require the use of specialized railway electrical test equipment and EMC testing chambers to ensure all systems meet BCRTC acceptance criteria and established EMC standards. The successful contractor is responsible for delivering critical documentation, including qualification test reports, FAT certificates, and a detailed compliance matrix. This project is managed under the Province of British Columbia with a response deadline of December 1, 2026. Performance of the contract will take place within Canada under NAICS code 541380.

BC Rapid Transit (Skytrain)

POSTED

about 10 hours ago

DEADLINE

Aerospace Quality Assurance & TestingThis subcontract for Aerospace Quality Assurance and Testing supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves performing independent inspection and verification, specifically executing origin inspection and acceptance in accordance with FAR 52.246-2. The contractor is responsible for verifying critical and major attributes using NIST-calibrated measurement and test equipment per RT001, employing sampling methods aligned with MIL-STD-1916 or ASQ H1331. Final deliverables include detailed inspection reports and Certificates of Conformance. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located in Cherry Point. The opportunity is categorized under NAICS code 541380. Interested parties should note the response deadline of November 17, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

First Article Testing and Quality Validation ServicesThis subcontract for First Article Testing and Quality Validation Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves performing specialized testing and validation, specifically executing First Article Tests on five units in accordance with MIL-F-16377/26 Table 1 and Section 4.3. The contractor is responsible for coordinating in-plant verification with DSMC-QAR and utilizing MIL-STD-1916 or ASQ H1331 sampling methods. The project requires the use of industrial testing equipment to ensure all military specifications are verified. Final deliverables include a comprehensive FAT Certification report and five validated test units. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 541380 for the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

First Article and Production Lot Testing (FAT/PLT)This subcontract involves providing specialized testing and inspection services for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work focuses on conducting First Article Testing on five units and Production Lot Testing using metrology equipment to ensure compliance with the specifications outlined in drawing 19200 5009271. The selected provider will be responsible for coordinating with Government Quality Assurance Representatives and delivering all necessary FAT reports and PLT results. The project is categorized under NAICS code 541380 and will be performed in Anniston, Alabama. Interested parties should note the response deadline of November 17, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

Third-Party Quality Assurance and Zero-Based Sampling InspectionThis subcontract for the Department of Defense DLA Weapons Support ASC Commodities Division involves providing third-party quality assurance and zero-based sampling inspection services. The contractor is responsible for performing independent inspection and acceptance testing for prime contractors to verify dimensional accuracy and material integrity against NAS specifications. Technical execution requires the use of CMM and certified calibration tools to ensure compliance with MIL-STD-130N and ASTM D3951, while following sampling plans per MIL-STD-1916 or ASQ H1331. The project is located in New Cumberland, Pennsylvania, and falls under NAICS code 541380. To be eligible, the provider must maintain ISO 17025 certification and is required to deliver detailed inspection reports and Certificates of Conformance. The solicitation was posted on November 10, 2026, with a response deadline of November 17, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

MIL-SPEC Packaging and Shipping ServicesThis subcontract for MIL-SPEC Packaging and Shipping Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves providing specialized packaging and final delivery preparation for 13 units, ensuring all items are packaged and labeled for FOB Origin shipment. Performance takes place in New Cumberland, Pennsylvania, under NAICS code 488510 for the Department of Defense. Technical requirements mandate strict adherence to RP001, MIL-STD-129, and MIL-STD-2073-1E standards. The contractor must utilize MIL-SPEC packaging materials and labeling equipment, specifically employing preservation method 33 and wrap material GB. The solicitation was posted on November 10, 2026, with a response deadline of November 17, 2026.

Freight Transportation Arrangement

POSTED

about 11 hours ago

DEADLINE

Special Shaped Spacer ManufacturingThis subcontract involves the manufacture of 13 Special Shaped Spacers, identified by NSN 5365-01-675-9007, for prime contractors supporting DLA Weapons Support ASC projects. The work requires precision machining in strict accordance with Basic Drawing NR 53711 7124771, Revision B, and explicitly prohibits the use of additive manufacturing. The final deliverable consists of 13 finished and inspected spacers. To be eligible, the provider must maintain SAE AS9003 or ISO 9001 quality systems, CMMC Level 2 compliance, and certification under the US/Canada Joint Certification Program. The project falls under NAICS code 332710 and is managed by the Department of Defense. Performance of the contract is located in New Cumberland, Pennsylvania.

POSTED

about 11 hours ago

DEADLINE

Aerospace Component Packaging & LogisticsThis subcontract for Aerospace Component Packaging and Logistics supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves the secure packaging of Pan Assemblies in accordance with ASTM D3951 and palletization per RP001. All shipments must be marked and labeled according to MIL-STD-129 and delivered to Fleet Readiness Center East in Cherry Point using the fastest traceable shipping methods available. The contract is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, falling under NAICS code 488510. Interested parties should note the response deadline of November 17, 2026.

Freight Transportation Arrangement

POSTED

about 11 hours ago

DEADLINE

Pan Assembly Fabrication (P/N 78500-02071-043)This subcontract involves the fabrication of two Pan Assembly units, part number 78500-02071-043, for prime contractors supporting the DLA Weapons Support ASC. The project requires precision CNC machining and assembly using aerospace-grade materials, strictly adhering to technical specifications provided by Sikorsky Aircraft Corporation. Quality assurance is a critical component of the contract, requiring the implementation of sampling plans per MIL-STD-1916 or ASQ H1331 to verify critical attributes with an AQL of 0.1. The work is associated with NAICS code 336413 and will be performed in Cherry Point, North Carolina, for the Department of Defense.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 11 hours ago

DEADLINE

Precision Manufacturing of Aircraft Fairings (NSN 1560-01-339-9721)This subcontract involves the precision manufacturing of 18 aircraft fairings under NSN 1560-01-339-9721 for the Department of Defense, specifically the DLA Weapons Support ASC. The contractor is responsible for fabricating parts according to Boeing Restricted Technical Data Package and Reference Drawing NR 81205 using BAC specifications, with attribute verification performed per MIL-STD-1916 or ASQ H1331. Performance will take place at Tinker AFB. To be eligible, the provider must maintain JCP certification, ITAR/EAR approval, and a quality system certified to SAE AS9003 or ISO 9001 standards. The scope of work includes the complete fabrication, packaging, and delivery of the finished fairings. The response deadline for this opportunity is November 17, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 11 hours ago

DEADLINE

Aerospace Surface Treatment and FinishingThis subcontract for Aerospace Surface Treatment and Finishing supports the Department of Defense through the DLA Weapons Support ASC Supplier OE and AF Division. The project involves performing specialized surface treatments and coatings on aircraft structural components to ensure essential corrosion resistance. All work must be executed in strict accordance with reference drawings BAC5300 and BAC5307, with final delivery consisting of finished plates featuring aerospace-grade treatments. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332813, with performance taking place at Tinker AFB. To be eligible, contractors must maintain NADCAP accreditation and ISO 9001:2015 certification. The solicitation was posted on November 10, 2026, with a response deadline of November 17, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 11 hours ago

DEADLINE

Supply of Aerospace Grade Raw Material for Structural PlatesThis subcontract involves the supply of aerospace grade raw material billets or sheets for prime contractors working on DLA Weapons Support ASC projects. The selected provider must source materials that strictly adhere to the alloy and temper requirements specified in Drawing 81205 39-10779 and ensure full material traceability through the provision of Mill Test Reports. All materials must be delivered directly to the fabrication facility and comply with the Buy American Act. The opportunity is a total small business set-aside under NAICS code 331315 for the Department of Defense. Performance will take place at Tinker AFB, and the response deadline for this requirement is November 17, 2026.

Aluminum Sheet, Plate, and Foil Manufacturing

POSTED

about 11 hours ago

DEADLINE

Manufacture of Structural Aircraft Plates (P/N 39-10779-34)This subcontract involves the precision machining and fabrication of 296 structural aircraft plates, part number 39-10779-34, for prime contractors supporting DLA Weapons Support ASC projects. The work must be performed using CNC machining in strict accordance with Basic Drawing NR 81205 39-10779 Revision E and TDP Revision C Gen 4. The final deliverable consists of 296 inspected and accepted plates, with quality control requiring the implementation of zero-based sampling per H1331. The project is a total small business set-aside under NAICS code 336413, with performance located at Tinker AFB. To be eligible, contractors must maintain CMMC Level 2, ISO 9001:2015, and ITAR/EAR compliance. The solicitation was posted on November 10, 2026, with a response deadline of November 17, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 11 hours ago

DEADLINE

Aerospace Grade Material SupplyThis subcontract, titled Aerospace Grade Material Supply, involves the provision of raw aerospace-grade metal stock for prime contractors supporting DLA Weapons Support ASC projects. The scope of work specifically requires the delivery of certified raw material stock for part number 35-13212-14, as detailed in Drawing 81205 35-13212. To ensure compliance with Department of Defense standards, the supplier must provide full traceability through material certifications and Mill Test Reports. The contract is managed by the DLA Weapons Support ASC Supplier OE and AF Div under NAICS code 331210, with the place of performance located at Tinker AFB. The solicitation was posted on November 10, 2026, with a response deadline set for November 17, 2026.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 11 hours ago

DEADLINE

NADCAP Approved Special Process FinishingThis subcontract, titled NADCAP Approved Special Process Finishing, involves performing specialized processing for prime contractors on DLA Weapons Support ASC projects. The scope of work includes heat treating, plating, anodizing, or non-destructive testing on aircraft channels in accordance with Drawing 20145214. All processed components must be delivered with the required certifications of compliance. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located at Tinker AFB. To be eligible, contractors must hold NADCAP approval for the specific process being performed and obtain ITAR/EAR data access approval. The solicitation was posted on November 10, 2026, with a response deadline of November 17, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 11 hours ago

DEADLINE

Aircraft Channel Fabrication and MachiningThis subcontract involves the fabrication and machining of 46 aircraft channels, part number 35-13212-14, for the Department of Defense under the DLA Weapons Support ASC. Production must strictly adhere to Reference Drawing NR 81205 35-13212 Revision B and TDP Rev B Gen 5. The manufacturing process requires the use of CNC machining and precision M&TE per RT001, while the use of additive manufacturing is explicitly prohibited. The selected contractor must maintain several critical certifications, including JCP certification, ISO 9001:2015, CMMC Level 2, and NIST SP 800-171. Performance will take place at Tinker AFB, and the final deliverable consists of 46 finished and inspected aircraft channels. The response deadline for this opportunity is November 17, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 11 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

First Article Testing and Inspection Services

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Third-Party Quality Compliance & Source Inspection

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

CSI Quality Assurance and Origin Inspection Services

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Production Lot Testing (PLT) Services

POSTED

DEADLINE

First Article Test (FAT) & Quality Validation

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

First Article Testing (FAT) for Rubber Materials

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Source Inspection and Quality Conformance Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

NDT and Material Certification Services for Naval Flanges

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

Supply Chain Traceability and Quality Certification

DLA Maritime - Portsmouth

POSTED

DEADLINE

Valve Pressure and Performance Testing

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

Metallurgical Testing and Certification Services

Navsup Flt Logistics Ctr Puget Sound

POSTED

DEADLINE

Aerospace Component Inspection and Certification

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS