Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

First Article Test (FAT) Execution

Active

Federal

Response Deadline11/05/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the execution of First Article Testing for prime contractors supporting the Department of Defense, specifically under the DLA Weapons Support ASC Supplier Oper AE and AF Div. The scope of work focuses on the first production unit of NSN 5365-01-622-5565 to ensure strict adherence to performance specifications, material properties, and dimensional accuracy. Testing will be conducted at Hill AFB using precision measurement equipment, including micrometers, calipers, and CMM. The successful contractor is required to provide a formal First Article Test Report and a Certification of Compliance upon completion. This effort falls under NAICS code 541380, with a response deadline of November 5, 2026.

General Info

First Article Testing for DoD NSN 5365-01-622-5565 at Hill AFB by November 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

NAICS

541380 - Testing Laboratories and Services

Place of Performance

HILL AFB, UT, 84056-5734, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-27-T-2255.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BUSHING, SLEEVE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 28

subcontract

Response DeadlineNov 5

Submission deadline

Response Deadline

11/05/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs First Article Testing (FAT) for prime contractors on Defense Logistics Agency (DLA) hardware contracts. Conducts testing on the first production unit to verify dimensional accuracy, material properties, and performance specifications for NSN 5365-01-622-5565 using precision measurement tools such as CMM, calipers, and micrometers. Delivers a First Article Test Report and Certification of Compliance.

Similar Contracts

Same NAICS industry code

Construction Aggregate TestingThis subcontract for Construction Aggregate Testing, managed by the California Department of General Services, involves providing specialized testing services for aggregates used in roads, curbs, walkways, and paving on CALFIRE facility projects. The selected contractor will be responsible for performing sampling and laboratory testing, utilizing laboratory scales and sieve analysis equipment to ensure all materials align with project design documents. The primary deliverable for this engagement is the provision of detailed aggregate quality and gradation reports. The project is located in San Diego and falls under NAICS code 541380. Interested parties must submit their responses by the deadline of November 24, 2026. This opportunity is designed to support prime contractors in maintaining quality control and regulatory compliance for critical infrastructure improvements within the CALFIRE network.

California Department of General Services

POSTED

about 7 hours ago

DEADLINE

Nondestructive Testing (NDT) ServicesThis subcontract for Nondestructive Testing (NDT) Services involves performing specialized inspections on structural elements for prime contractors working on CALFIRE facility projects. The primary objective is to detect internal flaws using ultrasonic, radiographic, or magnetic particle testing equipment. The selected provider is responsible for delivering detailed NDT certification reports and comprehensive flaw analysis to ensure structural integrity. The project is managed through the California Department of General Services and will be performed in San Diego. To qualify, personnel must hold an NDT Level II certification or higher in accordance with ASNT CP-189 standards. Interested parties should note the response deadline of November 24, 2026, and the associated NAICS code 541380.

California Department of General Services

POSTED

about 7 hours ago

DEADLINE

Structural Steel, Bolting, and Welding InspectionThis subcontract opportunity, managed by the California Department of General Services, involves providing specialized visual and technical inspections for structural steel, welding, and high-strength bolting on CALFIRE facility projects located in San Diego. The selected contractor will be responsible for utilizing welding gauges and torque wrenches to ensure structural integrity, ultimately delivering detailed welding inspection reports and bolting torque logs to the prime contractor. To qualify for this engagement, personnel must hold both AWS Certified Welding Inspector and ICC Structural Steel and Welding Inspector certifications. Interested parties should note that the solicitation was posted on October 28, 2026, with a response deadline set for November 24, 2026.

California Department of General Services

POSTED

about 7 hours ago

DEADLINE

Concrete and Reinforcing Steel Special InspectionThis subcontract for Concrete and Reinforcing Steel Special Inspection involves providing specialized inspection and testing services for prime contractors on CALFIRE facility projects in San Diego. The scope of work includes inspecting reinforcing steel placement and performing concrete sampling and testing for structures such as barracks, apparatus bays, and generator buildings. Required deliverables include concrete strength reports and reinforcing steel inspection checklists, utilizing tools such as concrete cylinders, slump cones, and compression testing machines. Qualified providers must hold ICC Reinforced Concrete Special Inspector and ACI certifications to ensure compliance with project standards. This opportunity is managed through the California Department of General Services under NAICS code 541380. The response deadline for this solicitation is November 24, 2026.

California Department of General Services

POSTED

about 7 hours ago

DEADLINE

Soils Inspection and Density TestingThis subcontract, managed by the California Department of General Services, involves providing specialized soils inspection and density testing for a CALFIRE facility project, specifically a fire station replacement in Potrero, California. The selected contractor will perform both field and laboratory testing of soils to support prime contractors during critical phases of construction, including clearing, grading, and foundation preparation. All work must be conducted in accordance with ASTM D 3740 standards, utilizing nuclear gauges and laboratory soil testing apparatus to ensure structural integrity. The contractor is responsible for delivering detailed soil density test reports and comprehensive inspection logs. This opportunity falls under NAICS code 541380 and was posted on October 28, 2026, with a response deadline of November 24, 2026. While the project is located in Potrero, the place of performance is listed within San Diego.

California Department of General Services

POSTED

about 7 hours ago

DEADLINE

Environmental Analytical Testing ServicesThis subcontract for Environmental Analytical Testing Services supports prime contractors working on research and enforcement projects for the California Department of Fish & Wildlife. The scope of work involves performing specialized analytical testing on water and waste samples, specifically focusing on nutrient analysis, turbidity, BOD, COD, and low-level cleanups for pesticides, PAHs, and SVOCs. All work must be performed in accordance with EPA and SW-846 standards, and the provider is required to maintain ELAP certification to deliver Level II and Level IV analytical reports. The project is categorized under NAICS code 541380 and is designated for performance in Amador. Interested parties should note that the response deadline is November 17, 2026. This opportunity is managed through the Cal eProcure system for the state of California.

California Department of Fish & Wildlife

POSTED

about 7 hours ago

DEADLINE

MT&IS POTRERO FIRE STATION- FACILITY REPLACEMENT

Solicitation # RESD-PMDB 2026-12

The California Department of General Services, Real Estate Services Division, is soliciting professional Materials Testing and Inspection Services (MT&IS) for the replacement of the Potrero Fire Station for CALFIRE in San Diego County. The project involves the construction of a standard two-engine fire station on a site of approximately seven acres, with a total estimated construction cost of $23,587,800.00. The selected contractor will be responsible for providing all labor, equipment, and insurance for field laboratory testing, including inspections of soils, reinforcing steel, structural steel, aggregate, and concrete. All services must be managed through CIMB's Procore software and comply with LEED standards and specific technical certifications, such as ASTM D 3740 for soil testing and ASNT CP-189 for nondestructive testing. The contract is estimated to last twenty-four months, with a ten percent retention held for all progress payments. Selection is based on a two-step process involving a written Statement of Qualifications (SOQ) and oral interviews for a short list of typically three firms. Evaluation criteria focus on the experience of the firm, principals, and key personnel, as well as quality control and testing methodologies. Interested firms must submit their SOQ in PDF format via the designated DGS Box.com site by November 23, 2026. Required documentation includes Federal Form SF330, a letter of interest with a Federal Identification Number, and proof of California professional licensing and DIR registration. The final contract will be based on negotiated fixed rates for specific employee classifications and services.

California Department of General Services

POSTED

about 7 hours ago

DEADLINE

Invitation For Bid P2675010, Analytical Testing Services

Solicitation # P2675010

The California Department of Fish and Wildlife (CDFW) is seeking a contractor to provide analytical testing services to support the Office of Spill Prevention Response Laboratory Program. The primary objective is to establish contingency capacity for water quality and nutrient analysis, ensuring continuity of services during catastrophic instrument failures or providing testing capabilities not available in-house. These services support research studies with partner state agencies and enforcement actions aimed at protecting state waters and identifying pollutants that impact wildlife. The contract has a maximum value of 31,000.00 dollars, and the award will be granted to the lowest responsive and responsible bidder. Eligible contractors must possess California Environmental Laboratory Accreditation Program (ELAP) certification, particularly for wastewater and hazardous waste testing. Bidders are required to provide a Quality Assurance Manual, Method Detection Limits, and reporting limits for all parameters. The submission process requires several certifications, including the Darfur Contracting Act and the Bidder Declaration Form, with a deadline of November 16, 2026. Preferences and incentives are available for certified Small Businesses and Disabled Veteran Business Enterprises (DVBE), including a 5% bidding preference for small businesses and specific incentive rates for DVBE participation. The contractor is responsible for providing all pre-cleaned sample containers and preservatives, with these costs included in the quoted price.

California Department of Fish & Wildlife

POSTED

about 7 hours ago

DEADLINE

NDT Inspection for Cam AssemblyThis subcontract involves providing Non-Destructive Testing services for prime contractors supporting DLA Weapons Support ASC aerospace projects. The scope of work focuses on conducting structural integrity inspections of forged and machined cam assemblies utilizing ultrasonic, radiographic, or penetrant methods. All work must be performed in accordance with RQ040 NDT Accreditation Requirements, and the contractor is responsible for delivering certified inspection reports. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place at Tinker AFB. Interested parties should note the response deadline of November 5, 2026, and the classification of the work under NAICS code 541380.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 12 hours ago

DEADLINE

First Article Testing and Material Certification ServicesThis subcontract opportunity is for the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division, to provide independent testing and validation services for prime contractors. The selected provider will perform First Article Testing on three initial units to verify compliance with Drawing 77445 specifications using specialized metrology and materials testing equipment. The scope of work includes coordinating with a Quality Assurance Representative for point-of-origin inspections and delivering a certified First Article Test Report. The project is a total small business set-aside under NAICS code 541380 and will be performed at Tinker AFB. To be eligible, the contractor must hold ISO/IEC 17025 accreditation. Interested parties must respond by November 5, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

Third-Party Inspection and CertificationThis subcontract for Third-Party Inspection and Certification supports the Department of Defense at the Jacksonville Building. The selected provider will perform final inspections and quality validation for prime contractors delivering aviation lighting for the DLA. Responsibilities include conducting functional testing and dimensional inspections using CMM and electrical test equipment to ensure compliance with TDP Rev A Gen 1, culminating in the delivery of certificates of conformance and detailed inspection reports. Critical requirements for this engagement include maintaining CMMC Level 2 certification and coordinating directly with the DCMA for source inspections. The project falls under NAICS code 541380 and is based in Jacksonville, Florida. Interested parties must respond by November 9, 2026.

JACKSONVILLE BLDG

POSTED

about 12 hours ago

DEADLINE

Specialized Testing Laboratory (First Article Test)This subcontract opportunity is for a Specialized Testing Laboratory to perform First Article Testing for prime contractors supporting DLA Weapons Support Land Supplier Operations. The selected provider will be responsible for testing two units using specialized shock and impact testing rigs to verify that performance metrics align with the provided technical data package. The final deliverable for this engagement is a certified FAT Test Report. The project is managed under NAICS code 541380 and will be performed in New Cumberland. Due to the nature of the work, the contractor must have access to ITAR and EAR export-controlled data, and ISO/IEC 17025 certification is preferred. Interested parties must respond by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 12 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Raw Material Supply for Sleeve BushingsThis subcontract involves the sourcing and delivery of certified raw alloy or material stock for prime contractors supporting DLA Weapons Support ASC projects. Specifically, the provider is responsible for delivering material stock for NSN 5365-01-622-5565 to the manufacturer, ensuring all shipments are accompanied by Mill Test Reports to maintain compliance with the DLA Master List of Technical and Quality Requirements. Depending on the restricted specifications of the materials, JCP certification may be required. The project is managed under the Department of Defense for the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place at Hill AFB. The opportunity is categorized under NAICS code 331210, with a response deadline set for November 5, 2026.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 12 hours ago

DEADLINE

Manufacturing of Sleeve Bushings (NSN 5365-01-622-5565)This subcontract involves the precision CNC machining of 12 sleeve bushings under NSN 5365-01-622-5565 for the Department of Defense, specifically the DLA Weapons Support ASC. The selected manufacturer must execute a First Article Test within 90 days and ensure all deliverables comply with MIL-STD-129 and MIL-STD-2073-1E standards. Final delivery of the finished units is required at the DLA Distribution Depot in Hill, Utah. To be eligible, the contractor must hold SAE AS9003 or ISO 9001 certification, be part of the US/Canada Joint Certification Program, and maintain CMMC Level 2 compliance. The project falls under NAICS code 332710, with a response deadline of November 5, 2026.

POSTED

about 12 hours ago

DEADLINE

Aircraft Windshield Panel Supplier (NSN 1560015210182)This subcontract involves the fabrication and supply of 104 new, unused aircraft windshield panels for prime contractors supporting DLA supply contracts. The supplier must produce the panels to the technical specifications of NSN 1560015210182, utilizing precision molding equipment and aviation-grade transparent materials. To be eligible, the contractor must be an OEM or an approved source with a valid CAGE code. The contract mandates strict adherence to DPAS regulations and requires all items to be marked according to MIL-STD-129. Managed by the Department of Defense under the DLA Weapons Support ASC, the project falls under NAICS code 336413. Responses for this requirement are due by November 4, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 12 hours ago

DEADLINE

Manufacture and Supply of Blind Rivets (NSN 5320010416450)This subcontract involves the manufacture and supply of 39 units of blind rivets, identified as NSN 5320010416450, for prime contractors supporting DLA supply contracts. The parts must be produced using precision equipment according to NAS9310 and drawing 13873 EI-010416450, with a strict prohibition on the use of additive manufacturing. Delivery is specified as FOB Origin, and the place of performance is located in New Cumberland. To ensure quality and compliance, the provider must hold SAE AS9003 or ISO 9001 certification. The contract mandates the implementation of sampling plans per MIL-STD-1916 or ASQ H1331, while packaging must adhere to ASTM D3951 and MIL-STD-129 standards. This requirement is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div.

Hardware Manufacturing

POSTED

about 12 hours ago

DEADLINE

Supplier of GraCo Wiper ElementsThis subcontract involves the supply of GraCo Part Number 160342 wiper elements to prime contractors supporting DLA Weapons Support ASC aerospace projects. The scope of work requires the delivery of commercial-off-the-shelf hardware along with the necessary certificates of conformance to guarantee full compatibility with Naval Air Warfare Center specifications. Managed by the Department of Defense under NAICS code 332999, the contract is associated with the DLA Weapons Support ASC Supplier Oper AE and AF Div. Performance of the contract is designated for Tracy, California, with a response deadline set for November 5, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 12 hours ago

DEADLINE

Manufacturer of Wiper Plate Assembly (PN 627915-1)This subcontract involves the fabrication and assembly of two Wiper Plate Assemblies (PN 627915-1) for prime contractors supporting DLA Weapons Support ASC projects. All manufacturing must strictly adhere to Naval Air Warfare Center Drawing 627915 Rev C and TDP Rev B Gen 5, with a specific prohibition against the use of additive manufacturing. Final products must be inspected and packaged according to MIL-STD-2073-1E standards. To be eligible, the manufacturer must maintain SAE AS9003 or ISO 9001 quality systems and hold a valid JCP certification to access necessary technical data. The project is managed under the Department of Defense, specifically the DLA Weapons Support ASC Supplier OE and AF Div, with performance located in Tracy, California. Responses are due by November 5, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 12 hours ago

DEADLINE

Supply of Electrical Insulation Tape (NSN 5970-01-012-4280)This subcontract involves the supply of electrical insulation tape, identified by NSN 5970-01-012-4280, for prime contractors working on DLA Weapons Support ASC projects. The contractor is required to provide two rolls of tape delivered FOB Origin to Evenes Airbase. All materials must strictly conform to technical specification BASIC CID A-A-59474D, Revision D, and adhere to MIL-STD-2073-1E and RP001 for packaging and MIL-STD-129 for marking. To be eligible, the supplier must hold either SAE AS9003 or ISO 9001 certification and maintain full compliance with DFARS 252.204-7012. This procurement is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with a response deadline set for November 5, 2026.

Pharmaceutical Preparation Manufacturing

POSTED

about 12 hours ago

DEADLINE

Manufacturing and Supply of Spacer, Sleeve (NSN 5365010716787)This subcontract involves the manufacture and supply of 6,250 units of Spacer, Sleeve (NSN 5365010716787) for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div. All parts must be produced in accordance with the DLA Master List of Technical and Quality Requirements and delivered FOB Origin from New Cumberland. The contractor is required to strictly adhere to the Buy American Act and the Berry Amendment. Additionally, all packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and PPP-H-1581 standards. The project falls under NAICS code 332510.

Hardware Manufacturing

POSTED

about 12 hours ago

DEADLINE

Supply of Aircraft I/O Panel Assemblies (NSN 1680-01-548-3582)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC, requires the procurement and delivery of eight Aircraft I/O Panel Assemblies, part number 5353370-001. The selected provider must ensure all units are packaged and marked in strict accordance with RP001, MIL-STD-2073-1E, RQ017, and MIL-STD-129 standards. Performance will take place in New Cumberland, Pennsylvania. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 423840. To be eligible, contractors must maintain Buy American Act compliance and complete a CMMC Level 2 Self-Assessment. Responses are due by November 5, 2026.

Industrial Supplies Merchant Wholesalers

POSTED

about 12 hours ago

DEADLINE

Supply of Forging-Grade Aerospace AlloyThis subcontract involves the supply of raw forging-grade aerospace alloy to prime contractors supporting DLA Weapons Support ASC projects for the Department of Defense. The scope of work requires the delivery of certified raw material in the form of billets or pre-forms that strictly adhere to the specifications outlined in Drawing NR 81205 65-18455. To ensure quality and compliance, the provider must furnish all necessary Material Test Reports and Certificates of Conformance. The project is managed under NAICS code 332111 and is associated with the DLA Weapons Support ASC Supplier Oper AE and AF Div. Performance of the contract is centered at Tinker AFB, zip code 73145-8000. Interested parties should note the response deadline of November 5, 2026, following the posting date of October 28, 2026.

Iron and Steel Forging

POSTED

about 12 hours ago

DEADLINE

Manufacturing of Cam Assembly, Cove Lip DoorThis subcontract involves the manufacture of two completed and inspected Cam Assemblies for Cove Lip Doors, supporting aerospace projects for the DLA Weapons Support ASC. The work requires forging and precision machining in strict accordance with Basic Drawing NR 81205 65-18455 Rev B, necessitating the use of industrial forging presses and CNC machining centers. Performance will take place at Tinker AFB. To be eligible, the contractor must maintain specific high-level certifications, including JCP certification, a Boeing Rights Guard License, and CMMC Level 2 compliance. The opportunity was posted on October 28, 2026, with a response deadline of November 5, 2026, under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 12 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

First Article Testing and Validation for Aircraft Lighting

POSTED

about 12 hours ago

DEADLINE

Contractor First Article Test (CFAT) Services

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

First Article and Production Lot Testing (PLT) for Catapult Pins

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

Third-Party Quality Inspection and Sampling

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

First Article Test (FAT) for Set Screws

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

First Article Testing (FAT) Services

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 12 hours ago

DEADLINE

First Article Test (FAT) and Validation

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

First Article Test (FAT) for SARC Component

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

Zero-Based Sampling and Quality Validation Services

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 12 hours ago

DEADLINE

Production Lot Testing (PLT)

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 12 hours ago

DEADLINE

First Article Testing (FAT) and Quality Validation Services

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 12 hours ago

DEADLINE

First Article Testing (FAT) for Humidity-Temperature Probes

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 12 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS