Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

First Article Test (FAT) Services

Open

Federal

Response Deadline11/19/2026, 12:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for First Article Test (FAT) Services involves providing technical validation and testing for prime contractors delivering DLA supply contracts. The scope of work focuses on conducting First Article Testing to verify the dimensions, material properties, and functional requirements of the first production unit. By utilizing quality assurance labs and testing rigs, the contractor will certify that the fitting aligns with NSN specifications and provide a final FAT report and certification confirming the item meets all government requirements. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place in New Cumberland. The opportunity is categorized under NAICS code 541380 and was posted on November 11, 2026, with a response deadline of November 19, 2026.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

NAICS

541380 - Testing Laboratories and Services

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-27-T-3864.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

FITTING, DOOR

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 11

subcontract

Response DeadlineNov 19

Submission deadline

Response Deadline

11/19/2026, 12:00:00 PM ESTin 8 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs technical validation and testing for prime contractors delivering DLA supply contracts. Conducts First Article Testing (FAT) to verify dimensions, material properties, and functional requirements of the first production unit. Utilizes testing rigs and quality assurance labs to certify the fitting against NSN specifications. Delivers a FAT report and certification confirming the item meets government specifications.

Similar Contracts

Same NAICS industry code

Aerospace Component Inspection and SamplingThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, involves specialized quality inspection and sampling for aerospace hardware. The selected contractor will perform these services at the point of origin for 11 units of fuselage fittings, utilizing MIL-STD-1916 or ASQ H1331 Table 1 zero-based sampling plans. To ensure compliance and precision, the contractor must maintain ISO 9001:2015 certification and utilize precision measurement tools, ultimately delivering detailed inspection reports and certifications of acceptance. The project is categorized under NAICS code 541380 and will be performed in San Diego, California. Interested parties must adhere to the timeline established by the posting date of November 11, 2026, with a response deadline of November 19, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

First Article Test (FAT) and Validation

POSTED

about 11 hours ago

DEADLINE

First Article Test (FAT) SpecialistThis subcontract opportunity is for a First Article Test Specialist to support prime contractors delivering DLA Troop Support Construction and Equipment contracts. The selected provider will perform testing and validation on the first production batch to ensure strict compliance with MIL-PRF-87260 and CID A-A-3174 standards. Utilizing specialized laboratory equipment, the specialist will verify critical density and compression properties, ultimately delivering a comprehensive First Article Test report and a certification of compliance. The project is associated with the Department of Defense and will be performed at the DDSP New Cumberland Facility in New Cumberland, Pennsylvania. Interested parties should note the solicitation was posted on November 11, 2026, with a response deadline of November 23, 2026. The work falls under NAICS code 541380, focusing on testing and validation services to ensure military specifications are met prior to full-scale production.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 11 hours ago

DEADLINE

First Article Test (FAT) ValidationThe First Article Test (FAT) Validation subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, involves the technical validation and testing of the first produced unit for prime contractors. The primary objective is to verify that the first article complies with the statement of work and all referenced drawings. The performance of these services will take place at Hill AFB. Eligible providers must be manufacturers or accredited testing laboratories maintaining a certified quality system, specifically ISO 9001 or AS9100. The successful contractor is responsible for delivering a formal First Article Test Report and final production approval. The solicitation was posted on November 11, 2026, with a response deadline of November 19, 2026, under NAICS code 541380.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

First Article Testing and Reporting for NSN 5340-01-551-8772

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

Source Inspection and Quality Certification ServicesThis subcontract for Source Inspection and Quality Certification Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves performing independent source inspections and quality verifications, including facility inspections and sampling or acceptance testing conducted according to MIL-STD-1916 or ASQ H1331 standards. The primary objective is to ensure zero non-conformance through the use of calibrated precision measurement tools such as micrometers, calipers, and thread gauges. Qualified providers must hold a Certified Quality Inspector designation or an equivalent aerospace certification to deliver the required inspection reports and certifications of conformance. The performance of these services is centered in New Cumberland, Pennsylvania, under NAICS code 541380 for the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

Production Lot Testing (PLT) and First Article Testing (FAT)

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

about 11 hours ago

DEADLINE

Specialized Testing and Quality Validation for Sniper Data BoardsThis subcontract involves providing specialized testing and quality validation for Sniper Data Boards to support DLA Weapons Support Land Supplier Operations. The scope of work requires the performance of First Article Testing on five units and Product Verification Testing in accordance with Procurement Note E05. The contractor must ensure strict compliance with RQ001 quality requirements and coordinate directly with the DCMA QAR for necessary origin inspections. The primary deliverables for this engagement include comprehensive FAT and PVT test reports along with the delivery of certified compliant units. The work is to be performed in New Cumberland, Pennsylvania, under NAICS code 541380. Interested parties must respond by November 23, 2026, to support these Department of Defense requirements.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 11 hours ago

DEADLINE

First Article Testing and Validation Services

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 11 hours ago

DEADLINE

First Article Testing and Validation for Critical Safety FastenersThis subcontract involves performing First Article Testing and validation for critical safety fasteners on behalf of prime contractors for the DLA Weapons Support ASC Commodities Division. The primary objective is to validate the manufacturing of Air Force Critical Safety Items by executing zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331 standards. All work must be conducted using certified metrology and inspection equipment to ensure strict compliance with safety specifications. The selected provider is responsible for coordinating the delivery of units to Hill AFB for final government approval. The final deliverables for this engagement include one fully tested unit and a formal FAT approval and certification report. Performance for this contract is centered in New Cumberland, Pennsylvania, under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

Third-Party Quality Conformance InspectionThis subcontract for Third-Party Quality Conformance Inspection supports the Department of Defense DLA Weapons Support ASC Commodities Division. The selected provider will perform independent quality assurance and origin inspections for prime contractors, ensuring strict adherence to RQ006 conformance inspections. These tasks must be executed using zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331 standards. Key technical requirements include the validation of MTE calibration per RT001 and the issuance of Certificates of Conformance as mandated by FAR 52.246-15. The contractor must maintain JCP certification to access necessary technical data and is responsible for delivering final inspection reports and CoCs. This opportunity falls under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

Production Lot Testing (PLT) and Quality Validation

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Technical Fabric and Polymer SupplyThis subcontract involves the supply of technical textiles and reinforced polymers to prime contractors supporting DLA Weapons Support ASC projects. The primary objective is to provide raw materials in rolls or sheets that meet the strict technical specifications required for NSN 2925-14-553-3433 electrical generator covers. To ensure full compliance with military standards, the supplier must provide all necessary material certifications and Certificates of Conformance. Managed under the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div, the contract falls under NAICS code 313310. The place of performance is located in Tracy, California. The solicitation was posted on November 11, 2026, with a response deadline of November 19, 2026.

Textile and Fabric Finishing Mills

POSTED

about 11 hours ago

DEADLINE

Electrical Generator Cover FabricationThis subcontract involves the fabrication of eight electrical generator covers, identified by NSN 2925-14-553-3433, for prime contractors supporting DLA Weapons Support ASC projects. The selected manufacturer must adhere to strict technical specifications and implement quality systems compliant with SAE AS9003 or ISO 9001, utilizing zero-based sampling per MIL-STD-1916 or ASQ H1331. All finished products must be packaged according to ASTM D3951 and marked in accordance with MIL-STD-129. The completed, marked, and packaged covers are to be delivered to DLA Distribution San Joaquin in Tracy, California. This opportunity is managed by the Department of Defense under NAICS code 339999.

All Other Miscellaneous Manufacturing

POSTED

about 11 hours ago

DEADLINE

Air Vent Drain Pan Supply

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 11 hours ago

DEADLINE

Manufacturing of Aft Fuselage Fittings (NSN 1560-011467835)This subcontract involves the manufacture and supply of 11 precision-forged Aft Fuselage Fittings under NSN 1560-011467835 for the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div. The work requires the use of specialized tooling for the forging process and strict adherence to MIL-STD-129 standards for all marking and labeling. Performance of the contract will take place in San Diego, California. To be eligible, the provider must maintain ISO 9001:2015 certification and CMMC Level 2 compliance. Additionally, the contractor must be part of the US/Canada Joint Certification Program to ensure full compliance with ITAR and EAR regulations. The solicitation was posted on November 11, 2026, with a response deadline of November 19, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 11 hours ago

DEADLINE

Aircraft Stiffener (P/N 2-7790-4) Manufacturing and Supply

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 11 hours ago

DEADLINE

Manufacturing and Supply of Resilient Weapon Mounts

POSTED

about 11 hours ago

DEADLINE

Manufacturing and Supply of Ring Spacers (NSN 001786598/5365)This subcontract involves the manufacture and supply of 81 ring spacers, identified by NSN 001786598/5365, for prime contractors supporting DLA supply contracts. The Department of Defense requires these components to be produced according to specific technical drawings and military standards, with a strict prohibition on the use of additive manufacturing processes. To ensure quality and safety, the manufacturer must perform rigorous inspections covering surface examination, fracture toughness, and tensile properties. The contractor is required to provide a Certificate of Quality Compliance that includes material traceability and a valid CAGE code. All completed spacers and the accompanying certification must be delivered to the DDSP New Cumberland Facility. This procurement is managed under NAICS code 332710 for the DLA Weapons Support ASC Supplier Oper AE and AF Division.

POSTED

about 11 hours ago

DEADLINE

Manufacture of Screw Assembly, SwaybraceThis subcontract involves the manufacture and supply of 12 Screw Assembly, Swaybrace units (NSN 1560-0107-18336) for prime contractors supporting the Department of Defense DLA Weapons Support ASC. The contractor is responsible for fabricating components according to specific technical drawings, executing a First Article Test, and ensuring all deliveries are handled FOB Origin. Performance will take place at Hill AFB. To ensure quality and security, the provider must implement quality systems compliant with SAE AS9003 or ISO 9001. Additionally, the contract mandates strict adherence to cybersecurity and regulatory standards, including CMMC Level 2, DFARS 252.204-7012, and the US/Canada Joint Certification Program.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 11 hours ago

DEADLINE

Pin-Rivet Collar Manufacturing and SupplyThis subcontract involves the manufacturing and supply of 232 specialized pin-rivet collars, identified by NSN 5320-01-561-3048, for prime contractors on government procurement projects. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the contract requires that all components strictly adhere to the technical specifications associated with the National Stock Number. To be eligible, providers must possess a valid UEI and CAGE code and maintain full compliance with FAR 52.222-54. The performance of this contract is centered in Tracy, California, under NAICS code 332722. Interested parties had until November 19, 2026, to respond to the solicitation.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 11 hours ago

DEADLINE

MIL-SPEC Waterproof/Opaque Packaging Services

Freight Transportation Arrangement

POSTED

about 11 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Aerospace Quality Assurance & First Article Testing (FAT)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

Aerospace Quality Assurance & Testing

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

First Article Testing and Quality Validation Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article and Production Lot Testing (FAT/PLT)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Third-Party Quality Assurance and Zero-Based Sampling Inspection

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Point-of-Origin Source Inspection Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

FAA Airworthiness Certification and Conformance Testing

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Production Lot Testing and Quality Validation

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Optical Component Electrical Testing and VSWR Analysis

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Third-Party Quality Assurance and Sampling Inspection

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

First Article Testing and Certification for Blind Rivets

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Electrical Cable Testing and Certification Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Get full access

Join 750+ contractors already using CLEATUS