Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

First Article Test (FAT) Validation Services

Active

Federal

Response Deadline09/22/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for First Article Test (FAT) Validation Services supports prime contractors on DLA and US Air Force aerospace hardware contracts. The selected provider will produce three initial test units and coordinate validation testing at Tinker AFB to verify that all components adhere to necessary technical specifications and safety requirements. The project concludes with the delivery of the three first article units and a comprehensive test validation report. This opportunity is managed by the ASC Commodities Division within the Department of Defense under NAICS code 541380, with a response deadline of September 22, 2026.

General Info

Subcontract for FAT validation services, three test units, and report due September 22, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-T-29JT.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

GOVERNMENT FIRST ARTIC

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 14

subcontract

Response DeadlineSep 22

Submission deadline

Response Deadline

09/22/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs Government First Article Testing (FAT) for prime contractors on DLA/US Air Force aerospace hardware contracts. Produces 3 initial test units and coordinates validation testing at Tinker AFB to ensure components meet technical specifications and safety requirements. Delivers 3 First Article units and a successful test validation report.

Similar Contracts

Same NAICS industry code

First Article Testing (FAT)This HUBZone set-aside subcontract is issued by the Department of Defense Electrical Devices Division for the performance of First Article Testing on electronic components. The selected provider will conduct testing on initial units in accordance with FAR clause 52.209-3 to ensure all components comply with the Technical Data Package. Using specialized laboratory equipment, the contractor will validate component specifications and provide a final First Article Test Report along with the approved test units. The project is categorized under NAICS code 541380 and will be performed in New Cumberland, Pennsylvania. Interested parties must submit their responses by September 25, 2026, following the posting date of September 14, 2026.

ELECTRICAL DEVICES DIV

POSTED

about 9 hours ago

DEADLINE

First Article Test (FAT) ServicesThis subcontract for First Article Test services is issued by the Department of Defense Land Supply Chain to perform testing on one unit of NSN 2910-01-618-9737 for prime contractors. The scope of work involves executing tests to verify the manufacturing process and part acceptability, coordinating with the Engineering Support Activity, and submitting results for approval. The contractor must utilize calibration systems that comply with ANSI/NCSL Z540-1-1994 or ISO 10012-1 standards and is required to deliver a certified report along with one approved test unit. The opportunity is a total small business set-aside under NAICS code 541380, with performance taking place in New Cumberland, Pennsylvania. The solicitation was posted on September 14, 2026, and requires a response by September 25, 2026.

LAND SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

Soils Testing and Construction Inspection ServicesThe Escondido Union School District is seeking a subcontractor for Soils Testing and Construction Inspection Services to support facility projects in Escondido, California. The selected provider will be responsible for performing field testing and inspection of earthwork and materials, including site preparation, fill placement, compaction, and underground utility trench backfill. Additionally, the scope includes testing concrete floor slabs and analyzing asphalt pavement sections using nuclear density gauges and concrete testing frames. Qualified candidates must hold a Certified Engineering Technician certification to deliver required inspection reports and compaction test results. This opportunity was posted on September 14, 2026, with a response deadline of October 1, 2026. The contract falls under NAICS code 541380 and is focused on ensuring structural integrity and material compliance for district facility improvements.

Escondido Union School District

POSTED

about 11 hours ago

DEADLINE

Fuel Tank Inspection and Integrity TestingThis subcontract for Fuel Tank Inspection and Integrity Testing supports prime contractors on Dekalb County Government projects. The selected provider will perform technical inspections and leak detection tests, utilizing methods such as visual inspections, ultrasonic thickness testing, hydrostatic testing, vacuum testing, and leak detection monitoring. All work must be conducted using calibrated pressure gauges and ultrasonic thickness gauges to ensure accuracy. To qualify, inspectors must hold API 653 certification or valid state-certified inspector licenses. The primary deliverables include detailed inspection reports and formal certifications of tank integrity. This opportunity is categorized under NAICS code 541380, with a response deadline of October 7, 2026.

Dekalb County Government

POSTED

about 12 hours ago

DEADLINE

Construction Materials Inspection (CMI) & TestingThis subcontract for Construction Materials Inspection and Testing, managed by the Public Works Engineering agency in Florida, involves the sampling and testing of component materials for prime contractors on City roadway projects. The selected provider will be responsible for conducting daily surveillance of contractor quality control, maintaining detailed materials logs, and evaluating quality control documentation through the use of laboratory testing equipment. Key deliverables include the submission of materials logs, test reports, and material acceptability determinations. To be eligible for this opportunity, contractors must possess FDOT Prequalification in Work Type 10.3 for Construction Materials Inspection. The solicitation is categorized under NAICS code 541380, with a response deadline of October 5, 2026.

Public Works Engineering

POSTED

about 13 hours ago

DEADLINE

Materials Testing and Inspection ServicesThe Materials Testing and Inspection Services subcontract involves providing independent sampling and testing for soil, concrete, and asphalt on City of Lakeland trail projects. The selected provider will support prime contractors by conducting soil classification and Proctor Maximum Density testing using NBS-traceable calibrated equipment. All work must adhere to ANSI/ASTM E329 and D3740 standards, and the contractor is required to be authorized to operate within the state of Florida and deliver certified laboratory reports. This opportunity is managed by the Public Works Engineering agency in Florida under NAICS code 541380. The solicitation was posted on September 14, 2026, with a response deadline of October 15, 2026. Interested parties can find further details through the provided OpenGov procurement portal.

Public Works Engineering

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Actuator Control Inspection and TestingThe Actuator Control Inspection and Testing subcontract supports Air Force Sustainment Center KC-46 projects through the Department of Defense via the Ok DLA Aviation At Oklahoma City agency. The scope of work involves performing quality assurance, functional testing, and non-destructive testing for prime contractors. Technical verification is conducted using electronic diagnostic equipment, pressure testing rigs, and specialized NDT tools such as Ultrasonic and X-ray technology. To qualify for this engagement, providers must maintain NADCAP certification along with ISO 9001 or AS9100 standards. The primary deliverables include detailed inspection reports and test certificates to ensure all technical specifications are met. This opportunity falls under NAICS code 541380 and has a response deadline of September 22, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

about 14 hours ago

DEADLINE

Nitrogen Oxide (NOx) Emissions Testing & ComplianceThis subcontract involves performing portable analyzer testing for prime contractors on Department of Veterans Affairs projects within the Butler Healthcare System. The primary objective is to conduct NOx emissions testing on three backup diesel generators to ensure full compliance with PADEP Operating Permit NM-1000325 and 25 Pa. Code Chapter 139. The selected provider will be responsible for developing test protocols, installing stack test locations, and operating load banks using EPA and PADEP compliant portable NOx analyzers. Final deliverables include an approved test protocol and a comprehensive final test report. The project is categorized under NAICS code 541380 and is managed by the Network Contract Office 4.

244-NETWORK Contract Office 4 (36C244)

POSTED

about 14 hours ago

DEADLINE

Quality Assurance and Testing for KC-46 Window PanelsThis subcontract involves providing quality assurance and testing services for window panels used in Air Force Sustainment Center KC-46 projects. The selected provider will perform independent dimensional inspections, optical clarity and distortion testing, and pressure and stress testing utilizing precision metrology and pressure chambers. All activities must ensure strict compliance with MQR-PSD-1 and Air Force airworthiness standards, culminating in the delivery of detailed inspection reports and test certificates. Managed by the Department of Defense through the Oklahoma City DLA Aviation office, the opportunity falls under NAICS code 541380. The solicitation was posted on September 14, 2026, with a response deadline of October 15, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

about 14 hours ago

DEADLINE

in about 1 month

First Article Testing (FAT) and ReportingThis subcontract for First Article Testing and Reporting, issued by the Department of Defense under agency W6QK Acc- Dta, focuses on the testing and validation of initial production units for prime contractors. The scope of work involves measuring tolerances and performance metrics against the technical data package using specialized equipment such as CMM, calipers, and material testing tools. All activities must be conducted in accordance with government standards CDRLS EH5C0450EH, culminating in the delivery of a completed and signed First Article Test Report. The opportunity is designated as a total Small Business Set Aside under NAICS code 541380. It was posted on September 14, 2026, with a response deadline of September 25, 2026.

POSTED

about 14 hours ago

DEADLINE

Specialized Testing and Quality Assurance (QA)This subcontract for Specialized Testing and Quality Assurance involves performing independent verification and testing of radio components for prime contractors serving DLA Land and Maritime. The scope of work focuses on Product Verification Testing (E05), which includes conducting functional testing and quality audits to ensure all hardware adheres to strict technical specifications. The selected provider will be responsible for delivering certified test reports and QA certifications that satisfy government source inspection rights. This effort is managed by the Department of Defense under DLA Land and Maritime in Albany, with a response deadline of September 29, 2026.

DLA Land And Maritime (albany)

POSTED

about 14 hours ago

DEADLINE

Visual and non-destructive vessel inspections and testing on five designated vessels at U.S. Army Corps of Engineers USACE, Fort Worth District CESWFCT, Sam Rayburn Power Plant in Jasper, TX

Solicitation # W9126G26QA122

The U.S. Army Corps of Engineers Fort Worth District is soliciting quotes for a firm fixed price contract to perform professional visual and non-destructive testing inspections on five designated pressure vessels at the Sam Rayburn Power Plant in Jasper, Texas. The scope of work requires a specialized crew consisting of one API 510 certified inspector and one UT Level II technician to conduct ultrasonic thickness measurements to assess structural integrity, corrosion, and wall thinning. The project consists of one 10-hour on-site shift and eight hours of offsite technical engineering evaluations to perform wear trend analysis. The final deliverable is a certified vessel inspection report including localized measurements, safety evaluations, and maintenance recommendations, all performed in strict compliance with API 510 standards. The period of performance is one month from the date of award. This is a total small business set-aside solicitation with a response deadline of September 16, 2026. Award will be based on the best value, considering price, past performance, and a go/no-go technical evaluation of the API 510 certification. Contractors must comply with Service Contract Act wage determinations for the specified Texas counties and utilize the Wide Area WorkFlow system for electronic invoicing. All contractor-provided equipment must be calibrated and safe, and personnel must coordinate access with plant operators at least 48 hours prior to mobilization.

W076 Endist Ft Worth

POSTED

about 14 hours ago

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Manufacture and Supply of Close Tolerance Screws (NAS7103-8)This subcontract involves the manufacture and supply of 286 precision-engineered close tolerance screws, specifically NSN 5305014358742, for prime contractors supporting DLA Aviation supply contracts. The items must be produced to NAS7103-8 standards, ensuring 3A and 3B thread dimensional conformance in accordance with FFD-STD-H28/20 System 22. The project requires the use of precision threading and inspection equipment to meet strict technical specifications. All items must undergo bare item marking per MIL-STD-130N and be packaged according to ASTM D3951. This requirement is managed by the ASC Commodities Division of the Department of Defense, with performance taking place in New Cumberland, Pennsylvania.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply of Cotter Pins (NSN 5315016406621)This subcontract involves the manufacture or procurement of two cotter pins meeting NSN 5315016406621 specifications for prime contractors delivering to DLA Aviation. The work is managed by the Department of Defense under the ASC Commodities Division, with performance taking place in Havelock, North Carolina. The contractor is responsible for ensuring all items meet quality control standards per FAR 52.246-1 and adhere to RP001 DLA Packaging Requirements for Procurement. Final delivery of the units will be handled via Government-Arranged Transportation.

Hardware Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply of Bolts (NSN 5306-00-5826419 / Part AN178-23A)This subcontract through the ASC Commodities Division of the Department of Defense involves the manufacture or procurement of 22 specialized bolts, identified as NSN 5306-00-5826419 and Part AN178-23A. The items must be produced according to FED-STD-H28/20 System 22 and TDP Rev C Gen 3, with inspections conducted per MIL-STD-1916 or ASQ H1331. Performance takes place at Fort Campbell, and the contract requires strict adherence to DFARS 252.225-7001 and MIL-HDBK-57 symbol registration. All units must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129. The opportunity was posted on September 14, 2026, with a response deadline of September 22, 2026. This procurement falls under NAICS code 332722 and is intended for prime contractors supporting Defense Logistics Agency supply contracts.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply of PIN-RIVET (NSN 5320010562209)This subcontract with the Department of Defense ASC Commodities Division involves the manufacture or sourcing of 1,991 PIN-RIVET units meeting NSN 5320010562209 specifications. The contractor is responsible for delivering these components to prime contractors, ensuring all items are packaged according to RP001 and marked per RQ017 and RQ011 standards to meet DLA requirements. The project falls under NAICS code 332510 and is to be performed at Hill AFB. The solicitation was posted on September 14, 2026, with a response deadline of September 22, 2026.

Hardware Manufacturing

POSTED

about 9 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services, issued by the Department of Defense ASC Commodities Division, requires the specialized packaging, marking, and palletization of items for prime contractors on DLA supply contracts. The service provider must ensure all work adheres to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 and DLA requirements for palletization. Key technical requirements include the application of Hazard Warning Labels according to 29 CFR 1910.1200 and the use of UV-protective packaging for items under FSC 5330 and 5331. The final deliverable is a fully packaged, marked, and palletized shipment. This opportunity falls under NAICS code 561910, with a response deadline of September 22, 2026.

Packaging and Labeling Services

POSTED

about 9 hours ago

DEADLINE

Supply of Northrop Grumman P/N 156C604H01This subcontract through the Department of Defense ASC Commodities Division involves the supply of one unit of Northrop Grumman Systems Corporation part number 156C604H01 for prime contractors on DLA supply contracts. The part must be manufactured or sourced according to TDP Rev A Gen 1 and Federal Supply Classifications 5330/5331, with delivery terms set as FOB Origin. The contractor is required to adhere to strict quality and identification standards, including physical identification and bare item marking per RQ017 and inspection according to MIL-STD-1916 or MIL-STD-105/ASQ Z1. Additionally, the delivery must comply with MIL-STD-129. The opportunity falls under NAICS code 336413, with a response deadline of September 22, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply of Straight Headed Pins (NSN 5315009570757)This subcontract with the Department of Defense ASC Commodities Division involves the supply of 59 units of straight headed pins meeting NSN 5315009570757 specifications. The contractor is responsible for manufacturing or sourcing the pins and ensuring all deliverables adhere to strict quality and logistics standards, including packaging per ASTM D3951, marking and labeling per MIL-STD-129, and palletization according to RP001. The project falls under NAICS code 332510 and is to be performed in New Cumberland, Pennsylvania. Interested parties must respond by September 22, 2026, following the solicitation posted on September 14, 2026.

Hardware Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply of NSN 5325-01-172-6971 (Critical Safety Item)This subcontract through the ASC Commodities Division of the Department of Defense involves the supply of 150 units of hardware component NSN 5325-01-172-6971 for prime contractors on DLA and US Air Force supply contracts. The performance will take place at Tinker AFB. The contractor is responsible for manufacturing or procuring items according to military specifications, performing quality assurance for Critical Safety Items, and ensuring all packaging and hazardous material labeling comply with MIL-STD-2073-1E and 29 CFR 1910.1200. The opportunity was posted on September 14, 2026, with a response deadline of September 22, 2026. It falls under NAICS code 332994.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply of Quick Release Pins (NSN 5315-01-443-3129)This subcontract involves the supply of quick-release pins under NSN 5315-01-443-3129 for the Department of Defense, specifically the ASC Commodities Division. The contractor is responsible for manufacturing or sourcing pins that strictly adhere to NASM17984 Revision 3 and NAS1332 Revision 9 standards. Key operational requirements include performing rigorous quality control and ensuring all packaging and marking comply with MIL-STD-129. The selected provider must be capable of delivering certification of compliance with all specified NASM and NAS standards and delivering the final physical products to the government activity. Performance will take place in Tracy, California. The solicitation was posted on September 14, 2026, with a response deadline of September 22, 2026, under NAICS code 335129.

Other Lighting Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

Supply of Self-Locking Spline NutsThis subcontract through the ASC Commodities Division of the Department of Defense involves the supply of self-locking spline nuts for prime contractors fulfilling DLA supply contracts. The provider is responsible for manufacturing or sourcing these components in strict accordance with the DLA Master List of Technical and Quality Requirements. Key operational requirements include performing physical identification and bare item marking per RQ017 and adhering to the DLA Packaging Requirements for Procurement under RP001. The contract focuses on the delivery of marked and packaged quantities of these specific nuts under NAICS code 332722, with a response deadline of September 22, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 9 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract for MIL-SPEC Packaging and Palletization Services involves providing military-grade packaging, marking, and palletization for prime contractors on DLA supply contracts. The service provider is responsible for executing palletization according to RP001, marking per MIL-STD-129, and packaging data per MIL-STD-2073-1E, utilizing MIL-SPEC pallets and cushioning to deliver cable assemblies ready for transit. The contract is managed by the ASC Commodities Division of the Department of Defense under NAICS code 488410. All properly packaged materials must be shipped via the fastest traceable means to the DMO at MCLB Albany, Georgia. The response deadline for this opportunity is September 22, 2026.

Motor Vehicle Towing

POSTED

about 9 hours ago

DEADLINE

Special Cable Assembly SupplierThis subcontract involves the manufacture and supply of two units of a specialized cable assembly, identified by NSN 5995-01-517-1519, for prime contractors under DLA supply contracts. The supplier is responsible for producing or sourcing the assembly in strict accordance with the provided technical data package, ensuring all wiring, connectors, and shielding meet specified requirements. The project is managed by the ASC Commodities Division of the Department of Defense and falls under NAICS code 334419. All deliverables must undergo quality inspection and maintain full compliance with MIL-STD-129 and MIL-STD-2073-1E standards. Performance of the contract is centered in Albany, with a response deadline of September 22, 2026.

Other Electronic Component Manufacturing

POSTED

about 9 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS