Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

First Article Test Report Generation

Active

Federal

Response Deadline12/22/2026, 11:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the performance of First Article Testing for Department of Defense electronic component projects, specifically focusing on MFG Part 13647234-4. The contractor is responsible for utilizing specialized equipment to verify the electrical and mechanical characteristics of the component in accordance with the technical data requirements specified in the contract. The primary deliverable is a formal Contractor First Article Test Report submitted for government approval. This project is managed under the Department of Defense through Al DLA Aviation At Huntsville, with a response deadline set for December 22, 2026, and categorized under NAICS code 541380.

General Info

Subcontract for DoD electronic component First Article Testing of part 13647234-4 by 2026.

Agency

Department Of Defense → Al DLA Aviation At Huntsville

NAICS

541380 - Testing Laboratories and Services

Place of Performance

AL

Set-Aside

NONE

Documents

This scope was carved out of SPRRA226R0014.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

NSN: 5998-01-630-5352, Electronic Components, P/N: 13647234-4

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 18

subcontract

Response DeadlineDec 22

Submission deadline

Response Deadline

12/22/2026, 11:00:00 PM UTCin about 2 months

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Al DLA Aviation At Huntsville

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Al DLA Aviation At Huntsville

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs First Article Testing (FAT) for prime contractors on Department of Defense (DoD) electronic component projects. Conducts testing on MFG Part 13647234-4 using specialized equipment to verify electrical and mechanical characteristics per contract technical data requirements. Generates a formal test report for government approval. Delivers the Contractor First Article Test Report.

Similar Contracts

Same NAICS industry code

Certified Hazardous Waste Analytical TestingThis subcontract opportunity with the California Department of Transportation involves providing certified chemical analyses of waste samples for prime contractors working on hazardous waste projects. The selected provider will conduct laboratory testing to determine disposal requirements and deliver analytical reports essential for manifest and profiling purposes. Performance of these services is centered in Inyo. To be eligible, the contractor must operate a state-certified laboratory holding both SWRCB-ELAP and CalEPA Environmental Laboratory Accreditation Program certifications. Interested parties must submit their responses by November 10, 2026, under NAICS code 541380.

California Department of Transportation

POSTED

about 14 hours ago

DEADLINE

Lead Testing and Environmental SamplingThis subcontract for Lead Testing and Environmental Sampling supports prime contractors on Gwinnett County Government firing range projects. The scope of work involves performing lead-level testing and wipe sampling on cleaned surfaces and within mechanical rooms to ensure lead concentrations remain below the threshold of 400 ug/ft2. All activities must be conducted using lead sampling kits and laboratory analysis in strict accordance with EPA and OSHA lead testing standards. The selected provider is responsible for delivering comprehensive testing reports and official clearance documentation to verify that the facilities are safe for occupancy and use. This opportunity falls under NAICS code 541380 and is associated with the state of Georgia. Interested parties should note the response deadline of November 13, 2026.

Gwinnett County Government

POSTED

about 15 hours ago

DEADLINE

Hazardous Waste Sampling and Profiling ServicesThis subcontract for Hazardous Waste Sampling and Profiling Services supports prime contractors on OC Waste and Recycling projects in California. The selected provider will perform chemical analysis and categorization of unknown or regulated waste streams, utilizing field sampling and specialized laboratory equipment such as Draeger pumps and OVA/HNU monitors to identify contaminants. All operations must be conducted by a certified environmental laboratory that maintains full compliance with California Code of Regulations Title 22. The primary deliverables for this engagement include detailed waste profile reports and formal categorization documentation. Interested parties should note that the response deadline is November 25, 2026, and the services fall under NAICS code 541380.

OC Waste & Recycling

POSTED

about 16 hours ago

DEADLINE

Certified Independent Concrete Testing Laboratory ServicesThis subcontract for Certified Independent Concrete Testing Laboratory Services involves providing independent quality control testing for prime contractors working on Maryland Transit Administration light rail projects. The scope of work requires the securing of samples according to ASTM C 172, the curing of specimens per ASTM C 31, and the execution of compressive strength tests on cylinders to ensure a design strength of 7,000 psi. The selected provider is responsible for delivering all necessary certified test reports and comprehensive QA/QC documentation. This opportunity falls under NAICS code 541380, with a response deadline set for November 17, 2026.

Maryland Transit Administration

POSTED

about 17 hours ago

DEADLINE

Environmental & Material Testing ServicesThis subcontract opportunity for Environmental and Material Testing Services supports prime contractors working on historic facility projects within Warren County, Virginia, specifically in Front Royal. The selected provider will be responsible for conducting comprehensive material testing and identifying hazardous substances, including lead and asbestos, while performing necessary environmental reviews. To qualify, contractors must possess the required certifications for environmental sampling and laboratory analysis. Key deliverables for this engagement include detailed material testing reports and the provision of environmental clearance or remediation plans. Interested parties must submit their responses by November 19, 2026.

POSTED

about 17 hours ago

DEADLINE

Third-Party Construction Materials Testing & InspectionThis subcontract for Third-Party Construction Materials Testing and Inspection supports the University of Massachusetts Medical School West Garage Modernization projects in Shrewsbury. The selected provider will perform independent quality assurance, field inspections, and materials testing for concrete, asphalt, and steel to ensure all construction materials comply with engineering specifications. Key deliverables include the submission of certified test reports and detailed inspection logs. To qualify for this engagement, the contractor must hold professional PE licensure and maintain laboratory accreditation through AASHTO or ASTM. The solicitation was posted on October 27, 2026, with a response deadline of November 17, 2026. The project falls under NAICS code 541380 and is managed through the University of Massachusetts System.

University of Massachusetts System

POSTED

about 18 hours ago

DEADLINE

West Garage Modernization - 3rd Party Testing

Solicitation # BD-27-1109-UMMS-UMMS-134854

The University of Massachusetts System, specifically the UMass Medical School, has issued solicitation BD-27-1109-UMMS-UMMS-134854 for third party construction materials testing and inspection services as part of the West Garage Modernization project. This open market procurement is based in Shrewsbury, Massachusetts, with the performance of services occurring at the Washington Street location. The solicitation was posted on October 27, 2026, and requires responses by November 17, 2026. Administrative oversight is managed by the UPST Procurement Office, with Toby Lau serving as the primary purchaser. All inquiries and billing are directed to the office located at 50 Washington Street, Shrewsbury, MA 01581. While the contract specifies a single line item for the required testing and inspection services, the total contract value and specific unit pricing are not disclosed in the provided documentation. Proposals must be submitted through the COMMBUYS system.

University of Massachusetts System

POSTED

about 18 hours ago

DEADLINE

Site Investigation and Field TestingThis subcontract opportunity for the City of Virginia Beach involves providing site investigation and field testing services for stormwater projects. The selected contractor will be responsible for conducting site visits, field reconnaissance, and technical testing to determine soil and site conditions using soil boring rigs and specialized equipment. Key deliverables include the provision of comprehensive site investigation reports and detailed field testing data. To qualify for this engagement, the contractor must employ a Professional Geologist or a Professional Engineer. The work will be performed within Virginia Beach under NAICS code 541380. Interested parties must submit their responses by the deadline of December 11, 2026.

City of Virginia Beach

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Structural Special Inspections and Third-Party ReviewThis subcontract involves providing independent third-party structural reviews and special inspections for prime contractors working on University of Connecticut facility projects. The scope of work includes conducting special inspections for concrete, masonry, and steel, as well as performing construction observation and reviewing material submittals. The selected provider is responsible for delivering comprehensive inspection reports and Statements of Special Inspections to ensure project compliance. To qualify for this engagement, the provider must hold a Connecticut Professional Engineering license and possess all relevant inspector certifications. Managed by DAS Procurement for the state of Connecticut, the solicitation was posted on October 27, 2026, with a response deadline of November 24, 2026. The contract falls under NAICS code 541380.

DAS Procurement

POSTED

about 19 hours ago

DEADLINE

Environmental Testing & Sampling LaboratoryThis subcontract opportunity is for an Environmental Testing and Sampling Laboratory to provide specialized analysis and sampling services for prime contractors working on New York State Education Department and Office of General Services projects. The selected provider will be responsible for sampling and analyzing suspect materials, specifically focusing on lead-based paint and PCB-containing caulk, to determine if abatement is necessary. The scope of work includes the use of laboratory equipment for the detection of asbestos and PCBs, culminating in the delivery of comprehensive Hazardous Materials Survey Reports. To be eligible, the laboratory must hold certifications that meet all applicable EPA and New York State standards. This procurement falls under NAICS code 541380 and is managed through the NYS OGS Design and Construction agency. Interested parties must submit their responses by the deadline of December 9, 2026.

NYS OGS Design & Construction - Construction Contractors

POSTED

about 19 hours ago

DEADLINE

in about 1 month

Medical Device Sterilization and PackagingThis subcontract for the Department of Defense Medical Supply Chain involves providing final sterile sealing and packaging services for prime contractors fulfilling DLA medical supply contracts. The scope of work requires the sealing of kits and the execution of EtO or Gamma radiation sterilization within a cleanroom environment, strictly adhering to ASTM D3951 and MIL-STD-129 standards. All deliverables must be provided as individually sealed, sterile boxes containing ten units each. To ensure quality and safety, the contractor must maintain sterilization validation according to ISO 11135 or 11137 and comply with Medical Marking Standard No. 1. The performance of this contract will take place in San Antonio, Texas. Interested parties should note the response deadline of November 2, 2026, for this specialized medical device sterilization and packaging requirement.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 20 hours ago

DEADLINE

First Article Test (FAT) and CertificationThis subcontract involves performing First Article Testing for prime contractors supporting the Department of Defense DLA Weapons Support Aviation Supply Chain. The scope of work focuses on the dimensional inspection and material verification of units for NSN 5315-01-609-5305, utilizing CMM and calibrated aerospace gauges to ensure compliance with technical data packages. The final deliverables for this project include a comprehensive FAT report and an approved sample. To be eligible, contractors must hold SAE AS9003 or ISO 9001 certification and maintain JCP certification to ensure full ITAR and EAR compliance. The work is designated under NAICS code 541380 and will be performed at Joint Base Lewis McChord. Interested parties must respond by November 4, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 20 hours ago

DEADLINE

More opportunities from Department Of Defense → Al DLA Aviation At Huntsville

Same awarding agency

Rugged Laptop SupplyThis subcontract involves the supply of four field-deployable ruggedized laptops intended for prime contractors working on DLA Weapons Support projects in Huntsville. The equipment must adhere to MIL-STD-810 or equivalent environmental ruggedization standards to ensure durability in field conditions. The opportunity is managed under the Department of Defense through the DLA Aviation office in Huntsville, falling under NAICS code 334111. The solicitation was posted on October 27, 2026, with a response deadline set for November 30, 2026.

Electronic Computer Manufacturing

POSTED

DEADLINE

in about 1 month

Cable Harness Assembly SupplyThis subcontract involves the manufacture and supply of specialized electrical cable harnesses designed for system integration for prime contractors supporting DLA Weapons Support projects in Huntsville. The scope of work requires the production and delivery of four units per type of Select Cable Harness Assembly, with all products strictly adhering to MIL-SPEC wiring and connector standards. Managed under the Department of Defense through DLA Aviation At Huntsville, the opportunity is categorized under NAICS code 335999. The solicitation was posted on October 27, 2026, and requires a response by the deadline of November 30, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

in about 1 month

Pallet, Mast Controller, and Launcher SparesThis subcontract through the Department of Defense and DLA Aviation At Huntsville involves the procurement of critical military hardware for DLA Weapons Support projects. The scope of work requires the supply of structural pallet assemblies, mast control hardware, and launcher rotable spares specifically designed to meet rigorous structural integrity and military hardware standards. The specific deliverables for this contract include four Pallet Assemblies, four Mast Controller Boxes, and four LGR-4 Launcher spares. Classified under NAICS code 332999, the opportunity was posted on October 27, 2026, with a response deadline set for November 30, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

in about 1 month

VN-310 DGPS/INS SupplyThis subcontract involves the supply of high-precision navigation equipment for prime contractors working on DLA Weapons Support projects in Huntsville. The scope of work specifically requires the delivery of four VN-310 Differential Global Positioning System and Inertial Navigation Systems units, which must adhere to strict navigation accuracy standards. The contract is managed under the Department of Defense through the DLA Aviation office in Huntsville and falls under NAICS code 334511. The solicitation was posted on October 27, 2026, with a response deadline set for November 30, 2026.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

in about 1 month

PDB Assembly & Circuit Breaker Kit SupplyThis subcontract involves the supply of power distribution boxes and specialized circuit protection hardware for prime contractors supporting DLA Weapons Support projects in Huntsville. The scope of work requires the delivery of four PDB Assemblies equipped with LCC600 AC/DC Power Converters and three Sensata-Crydom Circuit Breaker Kits in 28VDC 100A and 60A configurations, all of which must adhere to strict military power specifications. Managed under the Department of Defense through DLA Aviation at Huntsville, the contract falls under NAICS code 335910. The solicitation was posted on October 27, 2026, with a response deadline set for November 30, 2026.

Battery Manufacturing

POSTED

DEADLINE

in about 1 month

COFIN & FANG Box Electronics SupplyThis subcontract, titled COFIN & FANG Box Electronics Supply, involves the provision of ruggedized mission computers, routers, and integrated electronics boxes for prime contractors supporting DLA Weapons Support projects in Huntsville. The scope of work includes the delivery of four COFIN Assemblies, featuring EMU, ICU, LPC-965 Mission Computers, and MOXA Routers, as well as seven FANG Box Assemblies consisting of MOXA Routers and AC/DC Converters. All supplied hardware must adhere to strict ruggedization standards and maintain compliance with NIST 800-171 security requirements. The contract is managed under the Department of Defense through DLA Aviation at Huntsville and falls under NAICS code 334111.

Electronic Computer Manufacturing

POSTED

DEADLINE

in about 1 month

AS-65 Pointer/Gimbal Assembly SupplyThis subcontract, titled AS-65 Pointer/Gimbal Assembly Supply, involves the manufacture and delivery of four AS-65 Pointer/Gimbal Assemblies for the Department of Defense via Al DLA Aviation At Huntsville. The project focuses on providing precision gimbal assemblies designed for stabilizing and pointing sensors for prime contractors working on DLA Weapons Support projects in Huntsville. The required hardware must be produced using precision mechanical tolerances and military-grade ruggedization to meet strict performance standards. This opportunity falls under NAICS code 333999 and was posted on October 27, 2026, with a response deadline of November 30, 2026.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

in about 1 month

MX-10 RSTA Sensor & HCU SupplyThis subcontract involves the manufacture and delivery of high-resolution reconnaissance, surveillance, and target acquisition sensors and Host Control Units for prime contractors supporting DLA Weapons Support projects in Huntsville. The scope of work specifically requires the delivery of four MX-10 RSTA Sensors and four MX Sensor HCUs, all of which must adhere to strict military specifications and comply with Buy American and Build America Buy America requirements. Managed under the Department of Defense through DLA Aviation at Huntsville, the contract falls under NAICS code 334511. The procurement process began with a posting on October 27, 2026, and established a response deadline of November 30, 2026.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

in about 1 month

Manufacture of PATRIOT System Cable Assemblies (NSN 6150-01-531-5490)This subcontract involves the manufacture and supply of 720 specialized cable assemblies, identified by NSN 6150-01-531-5490, for prime contractors supporting DLA PATRIOT missile system projects. The scope of work includes electronic fabrication, coiling cables, and the capping and cushioning of connectors. To ensure quality and compliance, the contractor must perform a 100 percent inspection and submit a First Article Test Report. The project is managed under the Department of Defense through DLA Aviation At Huntsville and falls under NAICS code 335999. Strict adherence to Pkg Code/Level B Packing and Special Marking requirements is mandatory for all deliverables. The response deadline for this opportunity is January 6, 2027.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

TESTER,FUEL INTEGRI

Solicitation # SPRRA1-27-R-A006

Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

DEADLINE

in about 1 year

Sole Source to L3Harris ForceX, Inc | VAMPIRE Spares

Solicitation # SPRRA2-27-R-SP05

The Defense Logistics Agency (DLA) is issuing a sole-source solicitation, SPRRA2-27-R-SP05, to L3Harris ForceX, Inc. for the procurement of spares essential to the production of the U.S. Army's Vehicle Agnostic Modular Palletized ISR Rocket Equipment (VAMPIRE) Stalker Weapon Systems. This requirement will be integrated into the existing Subsumable Contract, SPRRA2-25-D-0007, supporting the Portfolio Acquisition Executive (PAE) FIRES Integrated Fires Mission Command (IFMC) Project Office. The acquisition includes a wide array of components such as pallet assemblies, MX-10 RSTA sensors, COFIN and PDB assemblies, FANG box assemblies, EchoShield radars, and various ruggedized computers and cable harnesses. The government seeks firm-fixed, best price/quantity break range pricing for these items. L3Harris ForceX must submit a comprehensive proposal by November 30, 2026, including a summary schedule, detailed cost data in Microsoft Excel format, and a proposal adequacy checklist for offers exceeding the TINA threshold. Key compliance requirements include JCP Certification for export-controlled items, disclosure of any organizational conflicts of interest per FAR 9.5, and a value-added description if subcontracting exceeds 70 percent of the total cost of work. The contract is subject to FAR and DFARS regulations regarding covered telecommunications equipment and pass-through charges.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

in about 1 month

WINCH, AIRCRAFT MOU

Solicitation # SPRRA1-27-R-A013

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Stability Testing for ManNAc Drug Product produced

Solicitation # 75N92026Q00002

National Institutes Of Health Nhgri

POSTED

CLOSED

W9123726QA006 Water Quality Analysis and Testing

Solicitation # W9123726QA006

W072 Endist Huntington

POSTED

CLOSED

Design-to-Outcome (DTO) Testing and Validation

Defense Health Agency

POSTED

DEADLINE

Quality Assurance and Regulatory Compliance Support

DLA Troop Support

POSTED

DEADLINE

Non-Destructive Testing (NDT) and Inspection Services

FA8118 Afsc Pzabb

POSTED

DEADLINE

Radiological Sample Analysis (Laboratory Services)

Nuclear Regulatory Commission

POSTED

DEADLINE

in about 1 month

Large Hydrostatic Test Chamber Design and Fabrication

Solicitation # 26_KC_0002

POSTED

CLOSED

Q301--Legionella Water Sample Testing and Analysis for Grand Junction VA Medical Center

Solicitation # 36C25926Q0044

Network Contract Office 19 (36C259)

POSTED

CLOSED

H365--Med Gas Testing & Inspection

Solicitation # 36C26226Q0041

262-NETWORK Contract Office 22 (36C262)

POSTED

DEADLINE

Hydrostatic Testing and System Commissioning

Network Contract Office 19 (36C259)

POSTED

DEADLINE

Quality Assurance and Inspection Services (Origin Inspection)

National Cmop Office (36C770)

POSTED

DEADLINE

Technology Testing & Validation Services

693JJ3 Acquisition And Grants Mgt

POSTED

DEADLINE

in over 2 years

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS