Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

First Article Testing & Quality Inspection Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract encompasses independent testing and documentation of a first article production unit to ensure full compliance with Government First Article Testing standards, requiring rigorous verification of dimensional accuracy, material specifications, and manufacturing processes. This work is critical to validating that the initial production unit meets all technical and quality requirements before full-scale manufacturing proceeds, serving as a formal checkpoint for conformance to contractual and military specifications. Performed under a subcontract awarded by the Defense Logistics Agency within the Department of Defense, the services are classified under NAICS code 541330 for engineering services and are tied to contract SPE4A726P4087. The performance location and detailed contact information are not specified, but the work must be executed in alignment with federal quality assurance protocols. The solicitation was posted on July 17, 2026, and is intended to support defense supply chain integrity through precise, documented verification of production readiness.

General Info

Independent testing and documentation of first article unit to verify compliance with military specs under DLA contract.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Independent testing and documentation of first article production unit to meet Government First Article Testing (GFAT) standards, including dimensional, material, and process verification.

Similar Contracts

Same NAICS industry code

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services under an Indefinite-Delivery, Indefinite-Quantity contract for major construction projects across multiple delivery methods including Design Build, Progressive Design Build, and other alternative delivery models. The scope encompasses full lifecycle support from planning and design through construction and closeout, ensuring projects adhere to authorized schedules, budgets, and quality standards. This IDIQ will enable the Port to rapidly mobilize expert CM resources as new project opportunities arise without requiring separate solicitations for each engagement. Services will be performed at various locations within the Port’s jurisdiction, with primary point of contact being Hala Rabbo, and project management coordination handled by Ann Davidson. The contract is classified under NAICS code 541330 for Architectural, Engineering, and Related Services, and is forecasted for release in July 2026. Interested parties should note that while the solicitation number and set-aside details are not yet available, the procurement is intended to establish a long-term framework for ongoing construction management support across the Port’s capital improvement programs.

Construction Management

POSTED

about 7 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test/adjust/balance, controls, and regulatory support services across the extensive facilities and infrastructure systems at Seattle-Tacoma International Airport, operating within a high-stakes, nonstop 24/7/365 environment. The scope centers on diagnosing and correcting performance gaps in mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems to enhance efficiency, reliability, occupant comfort, and system longevity, while ensuring compliance with all safety and regulatory mandates. Work is structured around Service Directives issued by Aviation Facilities and Infrastructure and executed in close coordination with Port of Seattle staff to meet defined deliverables and operational continuity goals. The contract is an Indefinite Delivery/Indefinite Quantity vehicle under NAICS code 541330, issued by the Port of Seattle’s Aviation Facilities and Infrastructure division. Primary point of contact is Jason Gates, with Jim Farris serving as Project Manager, both reachable through dedicated phone lines and email addresses. All work is to be performed at the airport premises, and while the solicitation was posted in 2026, no set-aside details or funding caps are specified, indicating the potential for ongoing, scalable engagement based on facility needs. The procurement is not yet active, providing early visibility to interested parties ahead of eventual release.

Aviation Facilities & Infrastructure

POSTED

about 7 hours ago

DEADLINE

Field Inspection and Quality Verification ServicesTexas Department of Transportation is seeking qualified contractors to perform independent field inspections and compliance verification of repaired crash cushions to ensure proper alignment, structural integrity, and adherence to TxDOT and MASH safety standards. The work involves on-site evaluation of installed or refurbished crash cushions to confirm they meet all required engineering and safety criteria prior to reactivation or final acceptance. This subcontract opportunity is open to eligible parties who can demonstrate technical expertise in transportation safety systems and experience with state and national highway safety protocols. Bids must be submitted by August 18, 2026, at 4:30 PM Central Time, with the solicitation posted on July 27, 2026. The contract falls under NAICS code 541330 for engineering services and is classified as a subcontract under TxDOT’s procurement framework. Performance is expected to occur across Texas roadways where repaired crash cushions are deployed, though specific locations are not detailed in the posting. Interested parties should review the full solicitation details through the provided Texas SmartBuy link to understand evaluation criteria, reporting requirements, and submission guidelines.

Texas Department of Transportation

POSTED

about 18 hours ago

DEADLINE

Quality Control and Submittal ManagementThe contract entails the coordination and preparation of shop drawings, product data, and samples for review and approval by the Architect/Engineer to ensure strict adherence to project specifications. This work is critical for maintaining compliance throughout the construction process and requires meticulous attention to detail, timely submission, and alignment with design intent and regulatory standards. The contractor is responsible for managing the entire submittal workflow, from initial preparation through final approval, ensuring all documentation meets the required quality and technical criteria. The solicitation is a subcontract for Quality Control and Submittal Management under NAICS code 541330, posted on July 27, 2026, with a response deadline of August 19, 2026. It is issued by the State of Utah and is open for proposals through the BonfireHub platform. The place of performance and specific office address are not detailed, but the work relates to projects under Utah’s jurisdiction. There is no set-aside designation or point of contact provided, and bidders must adhere to the outlined scope without additional guidance beyond the stated requirements.

POSTED

about 19 hours ago

DEADLINE

As-Built Record DocumentationThe contract titled As-Built Record Documentation requires the submission of updated as-built drawings and technical specifications that accurately reflect the final installed conditions of a project. This subcontract is focused on ensuring that all documentation aligns with the actual constructed state, capturing deviations, modifications, and final installations that may differ from original plans. The work involves meticulous field verification, data collection, and clear presentation of updated records to serve as a reliable reference for future maintenance, renovations, or regulatory compliance. The opportunity was posted on July 27, 2026, with a response deadline of August 26, 2026, and is categorized under NAICS code 541330, which pertains to architectural and engineering services. The contracting agency is the State of Utah, with no specific office address or point of contact provided. The place of performance details are not specified, indicating that the work may be project-specific and location-dependent. Subcontractors must be prepared to deliver precise, high-quality documentation in accordance with state standards and timelines.

POSTED

about 19 hours ago

DEADLINE

Shop Drawing and Submittal PreparationThe contract seeks specialized support for the preparation and submission of shop drawings, product data, and physical samples required for approval by architectural and engineering authorities. This work is critical to ensuring that materials, components, and systems align with project specifications and regulatory standards before implementation. The contractor is expected to coordinate closely with design teams to produce accurate, compliant, and timely submittals that meet rigorous technical requirements and deadlines. The opportunity is classified as a subcontract under NAICS code 541330, indicating it falls within architectural and engineering services. It was posted on July 27, 2026, with a response deadline of August 26, 2026, and is associated with the state of Utah, though specific location or office details are not provided. The solicitation is accessible via a public online portal, with no set-aside provisions indicated, meaning all qualified entities may respond without demographic or size-based restrictions.

POSTED

about 19 hours ago

DEADLINE

REQUEST FOR QUALIFICATIONS (RFQ) PROFESSIONAL ON-CALL AIRPORT ENGINEERING, ARCHITECTURAL & CONSTRUThe City of Swainsboro and the East Georgia Regional Airport Authority are soliciting qualified aviation consulting firms to provide on-call professional services in support of the Airport Capital Improvement Plan at the East Georgia Regional Airport in Swainsboro, Georgia. The scope of work encompasses a full range of engineering, architectural, and construction inspection/administration services including project planning, geotechnical and subsurface investigations, topographic surveying, environmental assessments, preliminary and final design, bidding support, and construction phase oversight. Services are expected to be provided as needed across multiple projects under the capital improvement plan, requiring firms to demonstrate expertise in airport-specific infrastructure, regulatory compliance, and federal aviation standards. Proposals must be submitted by the deadline of August 13, 2026, and the solicitation is open under the identification number PE-66723-NONST-2026-000000020. Interested firms should direct inquiries to Jerry Cadle at Jerry@cadlelawfirm.com, the designated point of contact. While the solicitation does not specify a set-aside or NAICS code, it is issued by a state and local government entity and requires responders to prove capability in delivering high-quality, compliance-driven aviation consulting services within the unique context of municipal airport development. Performance is expected to occur at the East Georgia Regional Airport in Georgia, with the selected firm required to maintain flexibility and responsiveness to meet the evolving needs of the airport’s capital improvement initiatives.

City of Swainsboro

POSTED

about 20 hours ago

DEADLINE

Fire Alarm System Inspection & Testing ServicesThe contract requires the performance of NFPA 72-compliant inspection and testing of fire alarm control panels and all associated devices across multiple facilities operated by Dallas Area Rapid Transit. The work is focused on ensuring full regulatory compliance and operational reliability of fire alarm systems throughout the transit system’s infrastructure. Contractors must demonstrate technical expertise in inspecting, testing, and documenting the functionality of alarm panels, initiating devices, notification appliances, and related components in accordance with the latest edition of NFPA 72 standards. This subcontract is open for response until August 4, 2026, with the solicitation posted on July 27, 2026. The NAICS code 541330 indicates that the work falls under architectural, engineering, and related services, with performance required at DART facilities across Texas. While specific locations and point of contact details are not provided, the scope demands consistent adherence to code, thorough documentation of findings, and timely remediation of any deficiencies identified during inspections. Contractors must be prepared to work on-site across multiple locations and maintain full compliance with all applicable fire safety regulations.

Dallas Area Rapid Transit

POSTED

about 21 hours ago

DEADLINE

Structural Design and Engineering ServicesThe contract encompasses the full scope of engineering and design services for a custom outdoor structure, requiring detailed CAD modeling, thorough structural analysis, and the creation of comprehensive construction drawings that comply with all applicable safety and environmental regulations. The work must be executed to ensure structural integrity and long-term resilience under real-world conditions, with all deliverables aligned to industry best practices and regulatory requirements. This is a subcontract opportunity under NAICS code 541330, issued by DFW International Airport in Texas, with a very tight submission window opening on July 27, 2026, and closing just three days later on July 30, 2026. The place of performance and specific location details are not provided, but the project is tied to airport infrastructure, suggesting stringent compliance standards and potential coordination with operational authorities. Interested parties must respond promptly as the deadline is approaching rapidly and no set-aside provisions are specified for small businesses or other categories.

Dfw International Airport

POSTED

about 21 hours ago

DEADLINE

First Article Testing & Quality Certification ServicesThe contract requires independent execution and comprehensive documentation of First Article Testing in strict accordance with DI-NDTI-80809B, encompassing detailed inspection, precise measurement, and formal reporting to the Defense Logistics Agency. This work must be performed with full adherence to quality assurance standards and delivered results that validate compliance with technical specifications for defense-related components or systems. All testing activities, methodologies, and outcomes must be thoroughly recorded and submitted to DLA for review and certification. This subcontract, issued under a Total Small Business Set-Aside, is classified under NAICS code 541330 and is targeted exclusively at small businesses. The performance location and detailed office address are unspecified, but the contracting entity is the ASC Commodities Division within the Department of Defense. The solicitation was posted on July 27, 2026, with a firm response deadline of August 7, 2026, allowing interested small businesses to submit proposals through the DIBBS platform. The requirement emphasizes accuracy, traceability, and regulatory compliance in delivering first article quality certification.

ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

Quality Inspection and Conformance ServicesThe contract requires comprehensive quality inspection and conformance testing of shear bolts using zero-defect sampling plans aligned with MIL-STD-1916 or ASQ H1331 standards, ensuring rigorous adherence to defect-free criteria throughout production. Full documentation of all testing procedures, results, and compliance records must be maintained and provided as part of delivery, leaving no room for ambiguity in quality assurance and traceability. This work is critical to confirming that shear bolts meet exacting military and industrial specifications without compromise. This is a total small business set-aside subcontract under NAICS code 541330, awarded by the ASC Commodities Division within the Department of Defense, with a response deadline of August 6, 2026. The solicitation is open exclusively to small businesses as defined by the SBA, and performance will be carried out under the direction of the DLA, though the specific place of performance is not detailed. Interested parties must submit responses through the designated DIBBS portal, and all activities must comply with federal subcontracting regulations and the stringent quality protocols defined by the referenced military and quality standards.

ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

Quality Assurance & Government Inspection Support ServicesThe contract entails providing advanced inspection systems and comprehensive support services to facilitate government-led quality verification at the point of origin, ensuring full compliance with MIL-STD-1916 and ASQ Z1.4 standards. This includes establishing robust audit readiness protocols, maintaining accurate and accessible recordkeeping systems, and managing nonconformances through structured corrective action processes to uphold defect prevention and continuous quality improvement. The scope demands integration of inspection technologies and procedures that enable real-time data capture, traceability, and reporting to meet rigorous defense quality requirements. The work is classified as a subcontract under NAICS code 541330 and is being administered by the ASC Commodities Division within the Department of Defense. The solicitation was posted on July 27, 2026, with responses due by August 27, 2026. While specific performance locations and point of contact details are not provided, the nature of the services implies operations at supplier or manufacturing facilities where government quality verification takes place. Successful proposers must demonstrate experience with military standards, proven quality systems, and the ability to deliver scalable inspection infrastructure capable of supporting high-stakes defense supply chain integrity.

ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in about 1 month

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Hazardous Materials Labeling and ComplianceThe contract requires strict adherence to hazard warning labeling protocols for any impeller or packaging containing hazardous or radioactive materials, as mandated by OSHA 29 CFR 1910.1200 and MIL-STD-129. All applicable substances must be clearly identified with standardized labels to ensure safe handling, storage, and transport, with compliance being non-negotiable throughout the production and delivery process. Any occurrence of radioactive materials exceeding established regulatory thresholds must be immediately reported to the Contracting Officer to facilitate appropriate oversight and mitigation. This subcontract, issued by the Defense Logistics Agency under the Department of Defense, is classified under NAICS code 541690 and places performance at Norfolk, Virginia, with a tight response deadline of July 30, 2026. The requirement underscores the critical importance of regulatory compliance in defense-related supply chains, where mislabeling or failure to alert authorities could pose significant safety and legal risks. Participation necessitates a thorough understanding of federal hazardous materials standards and the ability to implement precise labeling procedures in alignment with military and workplace safety regulations.

Other Scientific and Technical Consulting Services

POSTED

about 23 hours ago

DEADLINE

Military-Compliant Packaging and Palletization ServicesThe contract requires the provision of packaging, preservation, and palletization services for an impeller in strict compliance with MIL-STD-2073-1E and DLA Packaging Requirement RP001, ensuring all procedures meet military-grade standards for protection and handling during transit and storage. The work must be carried out to preserve the integrity of the component against environmental hazards, corrosion, and physical damage, with all methods and materials conforming to the specified technical directives. The place of performance is designated as Norfolk, Virginia, with the delivery location tied to this geographic area. This is a subcontract opportunity issued by the Defense Logistics Agency under the Department of Defense, with a NAICS code of 493190 indicating it falls under other related support activities for transportation. The solicitation was posted on July 27, 2026, and responses are due by July 30, 2026, indicating a short turnaround time for potential bidders to submit proposals. Participation requires a thorough understanding of federal packaging regulations and the ability to demonstrate compliance through proven processes and documentation. All work must align precisely with DLA’s requirements to be considered acceptable for execution.

Other Warehousing and Storage

POSTED

about 23 hours ago

DEADLINE

Supply of Axial Fan Impeller (NSN 4140014933547)The contract pertains to the procurement and delivery of one axial fan impeller with National Stock Number 4140014933547 and part number 064-48703D000, which must meet military specifications. The item is required to be delivered within five days to the Norfolk Naval Air Terminal in Virginia, with a zip code of 23511-4497. This is a subcontract issued under the Defense Logistics Agency, operating under the Department of Defense, with the North American Industry Classification System code 333413 indicating manufacturing of industrial machinery. The solicitation was posted on July 27, 2026, and responses are due by July 30, 2026, creating a tight three-day window for submission. The place of performance is clearly defined as Norfolk, and the contract is structured to ensure rapid fulfillment to support operational readiness at the naval facility.

Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

WAWF Invoice and Receiving Report SubmissionThis contract requires the electronic submission of payment requests and receiving reports through the Web Automated Work Flow system, ensuring full compliance with Defense Logistics Agency standards. All documentation including shipping data, packaging records, and traceability information must be accurately integrated and transmitted digitally to support end-to-end supply chain transparency and audit readiness. The obligation applies to a subcontract under the Department of Defense, specifically administered by the Defense Logistics Agency, with the NAICS code 561400 indicating facility support services. The system mandates real-time synchronization of logistics documentation to enable efficient processing, reduce manual errors, and facilitate timely payment validation in accordance with federal procurement protocols.

POSTED

about 23 hours ago

DEADLINE

Supply Chain Traceability DocumentationThe contract involves the creation, maintenance, and submission of detailed supply chain traceability records to ensure full compliance with DFARS and FAR 52.204-27 requirements. This includes providing material certifications, process documentation, and verifiable chain-of-custody records to demonstrate that all components and materials used in defense-related products meet rigorous federal sourcing and transparency standards. The work is structured as a subcontract under the Defense Logistics Agency’s Department of Defense umbrella, with the North American Industry Classification System code 541611 indicating it falls under management, scientific, and technical consulting services related to compliance and documentation. All traceability records must be accurately maintained and submitted on an ongoing basis to support audit readiness and regulatory adherence across the supply chain. While the specific performance location and point of contact are not provided, the contract is tied to a U.S. government procurement system with a publicly accessible record linked to award SPE7M226P3139. The solicitation is posted as a subcontract opportunity with no set-aside designation, indicating it is open to qualified vendors regardless of size or status, and is set to become effective in July 2026.

Administrative Management and General Management Consulting Services

POSTED

about 23 hours ago

DEADLINE

Packaging, Marking, and Preservation ComplianceThe contract requires full compliance with DLA standards for the packaging, preservation, and marking of electrical connectors, adhering strictly to MIL-STD-2073-1E and RP001. This includes the application of Method 41 preservation techniques to protect components from environmental degradation during storage and transit, along with precise container coding, bare-item labeling, and accompanying documentation to ensure traceability and regulatory conformity. All packaging must meet rigorous military specifications to guarantee readiness and integrity throughout the supply chain. The work is classified as a subcontract under the NAICS code 493190 and is administered by the Defense Logistics Agency within the Department of Defense. Although specific performance location and point of contact details are not provided, the contract is active under the reference SPS7M226P3139 and was posted on July 27, 2026. Compliance with every detail of the cited standards is mandatory, covering all aspects from physical packaging methods to labeling formats and recordkeeping, ensuring seamless integration into military logistics systems without variation or exception.

Other Warehousing and Storage

POSTED

about 23 hours ago

DEADLINE

Qualified Manufacturer Sourcing for Electrical ConnectorsThe contract entails the supply of electrical connectors identified by NSN 5935-01-025-9618, which must be manufactured by a supplier qualified under the Defense Logistics Agency’s Qualified Products List or Qualified Manufacturer List for Federal Supply Class 5935. All products must fully comply with applicable military specifications and include complete traceability documentation to ensure authenticity, quality, and adherence to defense standards. The work is sourced as a subcontract under the Defense Logistics Agency, part of the Department of Defense, and falls under the NAICS code 334417 which pertains to other electrical equipment and component manufacturing. The contract was posted on July 27, 2026, and the performance location and point of contact are unspecified, with the procurement managed through the DIBBS system via the reference contract SPE7M226P3139.

Electronic Connector Manufacturing

POSTED

about 23 hours ago

DEADLINE

NON-NSN ITEMA non-NSN item with part number 7310GM5022323 is being solicited under contract SPS3SE-26-Q-0407 by the Defense Logistics Agency, a component of the Department of Defense, with a purchase request quantity of two units. The solicitation was posted on July 27, 2026, and responses are due by August 4, 2026, with no set-aside type specified and no NAICS code assigned. The contract is classified as a federal solicitation, and while the office address and place of performance details are not provided, the action is conducted under the U.S. jurisdiction. All information and submissions must be processed through the official DIBBS platform via the provided solicitation link.

Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

about 23 hours ago

DEADLINE

TIRE, PNEUMATIC, VEHIThis contract specifies the procurement of one pneumatic vehicular tire, part number DF9B1 with NSN 2610016925438, sourced from Specialty Tires of America Inc., under solicitation SPE7L7-26-T-4465. The tire is classified as a commercial off-the-shelf item with sufficient catalog data available for evaluation, and it must comply with all applicable technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. Strict prohibitions are in place against the use of Class I ozone-depleting chemicals, and any substitute chemicals require prior approval unless explicitly permitted by the specification. The tire must have a minimum of 42 months of remaining shelf life at the time of delivery, despite a standard 60-month non-extendable shelf life for Type I (Code S) tires. Delivery is required within 20 days to the destination FOB, with zero variance allowed in quantity, and acceptance occurs at the delivery point. Packaging must conform to MIL-STD-2073-1E and DLA packaging requirements, with marking per MIL-STD-129 and a special shelf-life code of 32. Palletization and unit packaging details are specified, including container types, preservation methods, and handling instructions. The destination is the USS GEORGE H W BUSH CVN 77 in Norfolk, Virginia, with shipping coordinated under DLA procedures C19 and C20. The required delivery date is July 23, 2026, and the point of contact for inquiries is Molly Teegarden at the Defense Logistics Agency.

Tire Manufacturing (except Retreading)

POSTED

about 23 hours ago

DEADLINE

PIN ASSEMBLY, PUSHThe contract pertains to the procurement of two units of a PIN ASSEMBLY, PUSH, identified by NSN 4820-00-036-3865, under solicitation SPE7MC-26-T-136F, issued by the Defense Logistics Agency. Delivery is required within 20 days after order placement, with a specified original delivery date of July 10, 2026, and all items must be shipped FOB destination to the USNS SALVOR (ARS 52) at FPO AP 96678, with inspection and acceptance also occurring at the destination. Packaging must strictly conform to MIL-STD-2073-1E with packaging code U, preservation method CLNG/DRY:1, wrap material JA, and unit container A1, while intermediate packaging uses EC containers. Marking must adhere to MIL-STD-129, including bar-coded data matrix symbols for logistics tracking, and no special marking is required. Mercury or mercury-containing compounds are strictly prohibited in packaging, preservation, and marking unless specifically exempted for functional uses in batteries, instrument sensors, weapon systems, or NAVSEA-specified reagents, with portable mercury-containing devices requiring shock-proof construction and a secondary containment barrier. All materials must comply with the DLA Master List of Technical and Quality Requirements and avoid any introduction of hazardous substances as mandated by DFARS 252.223-7001 and FAR 52.223-3. The contract includes mandatory compliance with a suite of federal and defense acquisition regulations, including clauses on combating human trafficking, employment eligibility verification, sustainable products, hazardous material identification, cybersecurity safeguards, and the prohibition of covered defense telecommunications equipment from certain Chinese entities. Contract performance is subject to electronic invoicing through Wide Area WorkFlow (WAWF), and payment is governed by streamlined procedures with accelerated payments available to small business subcontractors. Offerors must hold a valid Unique Entity ID and disclose socioeconomic status as a small business or under programs such as HUBZone, SDVOSB, WOSB, or SDB, along with complete representations under FAR and DFARS terms. The solicitation is issued under NAICS code 336310, with no set-aside designation, and responses must be submitted electronically via the DIBBS portal by the deadline of July 30, 2026. The procurement applies simplified acquisition procedures

Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 23 hours ago

DEADLINE

ARMOR, TRANSPARENT, VEHIThe contract pertains to the procurement of transparent armor for vehicle applications, identified by the NSN 2541-01-574-5930, with a requested quantity of ten units. The solicitation, numbered SPE7L3-26-Q-1196, was posted on July 27, 2026, and responses are due by August 11, 2026. This is a federal solicitation issued by the Defense Logistics Agency under the Department of Defense, indicating the item is intended for military use. The procurement does not specify a set-aside type or NAICS code, and no physical office address or point of contact details are provided. The place of performance and delivery location are not defined in the available data, and all information is accessible through the official DIBBS portal for solicitation details.

Military Armored Vehicle, Tank, and Tank Component Manufacturing

POSTED

about 23 hours ago

DEADLINE

PIN, COTTERThe contract involves the procurement of 1,923 units of PIN, COTTER with NSN 5315-01-603-1394 under solicitation SPE4A6-26-T-07MP issued by the Defense Logistics Agency’s ASC Commodities Division. The solicitation was posted on July 27, 2026, with responses due by July 30, 2026, and delivery is required by December 8, 2026, with a need ship date of January 13, 2027, under a 169-day delivery period following award. Delivery is to be made FOB destination to the specified warehouse address in Tracy, California. The contract requires full compliance with military packaging standards MIL-STD-2073-1E and DLA RP001, including unit container packaging labeled as UNIT CONT:10 with OPI:O, and prohibits mercury or mercury compounds in packaging and preservation unless functionally essential and properly contained per NAVSEA 5100-003D. All items must be marked and labeled in accordance with MIL-STD-129, including barcoding and special marking for hazardous and radioactive materials, and contractors must submit hazard warning labels and Safety Data Sheets for non-exempt hazardous substances prior to award. Inspection and acceptance occur at origin under SAE AS9003 or ISO 9001-compliant quality systems, requiring zero non-conformances in sampling per MIL-STD-1916 or ASQ H1331. Invoicing must be submitted electronically via Wide Area WorkFlow using appropriate document types. Contract clauses include mandatory provisions on equal opportunity, trafficking in persons, employment eligibility verification, sustainable products, hazardous material identification, authorization and consent, type of contract, small business representation, cybersecurity under NIST SP 800-171, whistleblower rights, and safeguarding covered defense information. Offerors must self-certify their small business status and provide UEI and CAGE codes, with affirmative responses triggering disclosures for covered defense telecommunications equipment and socioeconomic program eligibility. No contract value is calculable due to missing extended prices and incomplete pricing tables. The contracting officer’s representative and payment details will be assigned upon award.

Other Fabricated Wire Product Manufacturing

POSTED

about 23 hours ago

DEADLINE