Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

First Article Testing and Validation

Active

Federal

Response Deadline09/14/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract with the Department of Defense, specifically LSO Combat Vehicles and Armament, involves performing technical testing and validation for prime contractors supporting DLA Land and Maritime supply contracts. The scope of work requires the testing of three units of NSN 2540-01-529-5208 using laboratory protocols and specialized measurement equipment to verify compliance with government specifications. The contractor is responsible for delivering the three tested units along with a formal First Article Test Report, which must be generated within 45 calendar days. The performance of these services will take place at Fort Bliss, Texas, under NAICS code 541380.

General Info

DoD subcontract for testing three NSN units and reporting at Fort Bliss, Texas.

Agency

Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENTView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

FORT BLISS, TX, 79918-0000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L4-26-T-6718.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CONTRACTOR FIRST ARTIC

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 3

subcontract

Response DeadlineSep 14

Submission deadline

Response Deadline

09/14/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs technical testing and validation for prime contractors delivering DLA Land and Maritime supply contracts. Tests 3 units of NSN 2540-01-529-5208 using specialized measurement equipment and laboratory protocols to ensure government specification compliance. Generates a formal First Article Test Report within 45 calendar days. Delivers the FAT report and 3 tested units.

Similar Contracts

Same NAICS industry code

Testing & InspectionThis subcontract for Testing and Inspection, managed by Filanc, involves providing third-party quality assurance testing and inspection services for prime contractors on municipal projects within the City of Oceanside. The scope of work includes conducting soil compaction testing, concrete strength testing, and weld inspections, with the requirement to deliver certified inspection logs and test reports. The opportunity is categorized under NAICS code 541380 and is set aside for various small business designations, including Small Disadvantaged, Women-Owned, HUBZone, and Veteran-Owned small businesses. The solicitation was posted on September 5, 2026, with a response deadline of September 16, 2026.

POSTED

about 21 hours ago

DEADLINE

Aseptic Technique Validation for Compounding Personnel

257-NETWORK Contract Office 17 (36C257)

POSTED

DEADLINE

Certification of Primary and Secondary Engineering Controls (PECs/SECs)

257-NETWORK Contract Office 17 (36C257)

POSTED

DEADLINE

Specialized Cyclist and aPLI TestingThis subcontract, titled Specialized Cyclist and aPLI Testing, is issued by the Department of Transportation's NHTSA Office of Acquisition. The contractor is responsible for performing specialized testing for cyclists and adult Pedestrian Lower Indentors for prime contractors on NHTSA projects. This work involves executing specific test protocols using cyclist-specific impactors and launch systems in strict adherence to NCAP Cyclist/aPLI testing protocols, with the final delivery consisting of comprehensive test results and reports for the impact series. The project falls under NAICS code 541380 and is based in Washington, DC. The solicitation was posted on September 5, 2026, with a response deadline of September 15, 2026.

693JJ9 Nhtsa Office Of Acquistion

POSTED

DEADLINE

New Car Assessment Program (NCAP) Pedestrian Impact Testing

Solicitation # 693JJ926R000073

The National Highway Traffic Safety Administration (NHTSA) is seeking a multiple-award Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract for pedestrian protection impact testing on production motor vehicles as part of the New Car Assessment Program (NCAP). The selected contractors will perform test-procedure evaluations, impactor qualifications for headforms, Flexible Pedestrian Legform Impactors (Flex-PLI), and upper legforms, as well as actual testing on assigned vehicle models. These services, which may include optional cyclist and aPLI testing, must be conducted at the contractor's off-site facility in Washington, DC, in accordance with the NCAP Crashworthiness Pedestrian Protection Test Procedure. The contract will be structured as a firm-fixed-price agreement with five 12-month ordering periods, including options to extend services for up to six months and options for increased quantities. Award decisions will be based on a best-value tradeoff, where technical factors—including the technical plan, quality assurance management plan, facilities, personnel qualifications, and past performance—are collectively more important than price. This full and open competition falls under NAICS code 541380. The formal request for proposals is expected to be posted on SAM.gov around August 28, 2026, with a submission deadline of September 14, 2026.

693JJ9 Nhtsa Office Of Acquistion

POSTED

DEADLINE

Certification of Sterile Compounding Facilities Services

Solicitation # 36C25726Q0894

The Department of Veterans Affairs, Network Contracting Office 17, is conducting market research through a Sources Sought Notice for the certification of sterile compounding facilities services at the South Texas Veterans Health Care System, specifically the Audie L. Murphy Memorial VA Hospital in San Antonio, Texas. Under solicitation number 36C25726Q0894 and NAICS code 541380, the agency is seeking capability statements from vendors capable of providing testing and certification for primary and secondary engineering controls, including Biological Safety Cabinets and Laminar Air Flow Workstations. The required services must adhere to strict compliance standards, including USP 797 and 800, VHA Directive 1108.12, and CETA/CNBT requirements. Key technical deliverables include the certification of engineering controls and the performance of personnel aseptic technique testing, such as media fill testing and fingertip or thumb sampling. Interested vendors must submit their responses by September 14, 2026, to the primary point of contact, Stephanie Reeves.

257-NETWORK Contract Office 17 (36C257)

POSTED

DEADLINE

Materials Testing & Quality AssuranceThis subcontract for Materials Testing and Quality Assurance involves providing sampling and laboratory testing for asphalt mix designs on Los Angeles County Public Works road projects. The selected provider must be a certified testing laboratory capable of executing CCPRACP mix design, sampling, and testing using certified equipment for bituminous materials. The primary deliverables include mix design certifications and detailed sampling reports for prime contractors. The opportunity was posted on September 5, 2026, with a response deadline of September 29, 2026. The work is categorized under NAICS code 541380 and is associated with the California agency Los Angeles County Public Works, with the place of performance located in Garfield Heights.

Los Angeles County Public Works

POSTED

DEADLINE

Pavement Materials Testing & Lab ServicesThe City of Morro Bay is seeking a subcontract for pavement materials testing and laboratory services to support pavement rehabilitation projects. The selected provider will be responsible for performing both field and laboratory testing on surface seal and hot mix asphalt materials, utilizing nuclear density gauges and laboratory ovens in accordance with Caltrans or ASTM standards. Qualified candidates must operate an accredited testing laboratory and be capable of delivering detailed compaction reports and laboratory test results. This opportunity is categorized under NAICS code 541380, with a response deadline of September 24, 2026, for work to be performed in Morro Bay, California.

City of Morro Bay

POSTED

DEADLINE

Third-Party Impact Attenuation TestingThis subcontract for the City of Burlingame involves providing independent safety certification testing for playground projects. The selected contractor will perform impact attenuation testing using ASTM-compliant drop testers to measure G-MAX and HIC criteria, ensuring that all installations meet ASTM F1292 standards for ten-foot fall heights. The primary deliverable is a third-party impact attenuation results report that certifies the safety of the system. The project is based in Burlingame, California, and falls under NAICS code 541380. Interested parties must submit their responses by September 23, 2026.

The City of Burlingame

POSTED

DEADLINE

450-740108 ALI Lift Inspection Req. 9/4/2026

Solicitation # SRC0000036034

This solicitation, identified as SRC0000036034, requires the performance of an ALI inspection for a 2-post lift located at the ALDOT District Five facility in Talladega, Alabama. The project is managed by the Alabama agency Ec Reg Talladega Dist 45, with Jennifer Peters serving as the primary point of contact. The opportunity was posted on September 4, 2026, and requires a response by the deadline of September 9, 2026. This is a state-level procurement for specialized equipment inspection services to be performed within the state of Alabama.

Ec Reg Talladega Dist 45

POSTED

DEADLINE

Project No. 130006-26, Miami Shores Subdistrict Smoke Testing Program

Solicitation # PP-2026-0060

The Environmental Services agency in Ohio has issued solicitation PP-2026-0060 for Project No. 130006-26, the Miami Shores Subdistrict Smoke Testing Program. This opportunity was posted on September 4, 2026, and requires a response by September 30, 2026. The project is based in Ohio, with the primary agency office located in Dayton. Interested proposers must submit all inquiries regarding the RFP through the OpenGov Question and Answer portal. Primary contact for the project is Assistant Director Tiffany Petry, while Senior Buyer Barb Asberry serves as the secondary contact and the point of contact for portal-related issues.

Environmental Services

POSTED

DEADLINE

Transmission Water Main Inspection Project

Solicitation # 02-27-02

The City of Keene is soliciting proposals for the Transmission Water Main Inspection Project, identified by solicitation number 02-27-02. The project aims to address a history of frequent breaks in the city's 16-inch ductile iron transmission water main, which serves as the primary distribution line. The objective is to identify potential failures to prevent unplanned service disruptions and ensure the reliability of water operations for the city and surrounding communities. Qualified vendors must submit their responses by the deadline of October 8, 2026. The project is based in New Hampshire and is managed by the City of Keene. Interested parties can contact Yves P Gakunde for further information regarding this solicitation.

POSTED

DEADLINE

in about 1 month

More opportunities from Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

Same awarding agency

Supplier of Nonmetallic Hose Assemblies (NSN 4720-01-513-8903)This subcontract with the Department of Defense involves the supply of 28 nonmetallic hose assemblies, specifically Oshkosh Defense part number 3442509, identified as National Stock Number 4720015138903. Classified as a Critical Application Item, the supplier is responsible for manufacturing or sourcing the components and providing certification of conformance to original equipment manufacturer specifications. The contract requires strict adherence to packaging and marking standards, specifically ASTM D3951 and MIL-STD-129. This procurement is managed under NAICS code 326220 for the LSO Combat Vehicles and Armament agency, with a response deadline set for September 18, 2026.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

DEADLINE

Military-Grade Packaging and Labeling

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Manufacturing of Linear Actuating Cylinder Assemblies

Mechanical Power Transmission Equipment Manufacturing

POSTED

DEADLINE

Supply of Vehicular Seat Cushions (NSN 2540015295649)

Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

DEADLINE

Supply of Optics Cabinets (NSN 1095015507933)This subcontract involves the procurement and delivery of 16 specialized Optics Cabinets for prime contractors supporting the Defense Logistics Agency. The units must strictly adhere to NSN 1095015507933 specifications, specifically utilizing Spacesaver part number UWRCO534H or Xact Tool part number XWRCO534H. All deliverables must comply with RP001 DLA Packaging Requirements for Procurement to ensure proper transport and handling. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 337215 and is managed by the LSO Combat Vehicles and Armament within the Department of Defense. Interested parties must submit their responses by September 18, 2026, to fulfill the requirement for these completed optics cabinets.

Showcase, Partition, Shelving, and Locker Manufacturing

POSTED

DEADLINE

First Article Testing and Reporting for NSN 014795026This subcontract involves performing first article testing for prime contractors on DLA Land and Maritime projects to verify the compliance of NSN 014795026. The selected provider will use specialized laboratory equipment to test one unit of the item against its technical specifications. The primary deliverable is a formal First Article Test Report, which must be generated and submitted within 45 calendar days of the contract award. The project is managed by the LSO Combat Vehicles and Armament under the Department of Defense, with the place of performance located in Texarkana, Texas. This opportunity falls under NAICS code 541380 and was posted on September 3, 2026, with a response deadline of September 14, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

Supply of NSN 014795026 (FSC 2540)This subcontract involves the manufacture or procurement of six hardware units under NSN 014795026 for prime contractors supporting DLA Land and Maritime projects. The work is managed by the Department of Defense through the LSO Combat Vehicles and Armament agency, with the place of performance located in Texarkana, Texas. The contractor must ensure all units are packaged, marked, and shipped in strict accordance with MIL-STD-129 and MIL-STD-2073-1E. Compliance is required for SPI AK14795026, the Hazard Communication Standard 29 CFR 1910.1200, and DFARS 252.204-7012. The project falls under NAICS code 332999, with a response deadline set for September 14, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Supply of Pneumatic Tire Wheel Assemblies (NSN 2530-01-707-2392)This subcontract, issued by the Department of Defense through the LSO Combat Vehicles and Armament agency, requires the supply of 39 pneumatic tire wheel assemblies under NSN 2530-01-707-2392. The contractor must provide assemblies that meet Polaris Sales Inc 3FP69 P/N 1523964-383 specifications and ensure all shipments are packaged and marked according to MIL-STD-129. Additionally, the supplier must maintain full compliance with the Consumer Product Safety Act, with delivery terms set as FOB Origin. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 326220. Interested parties must submit their responses by September 18, 2026, following the solicitation posted on September 3, 2026.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

DEADLINE

Supply of Vehicular Mounting Brackets (NSN 2590015281762)This subcontract involves the supply of 127 specialized vehicular mounting brackets, identified by NSN 2590015281762 and Part Number TV050009, for prime contractors under DLA Land and Maritime supply contracts. The provider must manufacture or source these components to ensure full compliance with OEM specifications from either AMZ Alabama Inc. or BAE Systems Tactical Vehicle Systems LP. The contract is managed by the Department of Defense under the LSO Combat Vehicles and Armament agency, with performance located in Texarkana, Texas. The selected provider is required to have WAWF reporting capabilities to fulfill the administrative requirements of the agreement.

Other Motor Vehicle Parts Manufacturing

POSTED

DEADLINE

MIL-SPEC Packaging and Marking Services

General Warehousing and Storage

POSTED

DEADLINE

Nozzle (NSN 4940015938045) Manufacturer/Supplier

Marking Device Manufacturing

POSTED

DEADLINE

Supply of Hose-Tubing Guards (NSN 4720013433671)This subcontract with the Department of Defense, specifically under LSO Combat Vehicles and Armament, involves the manufacture or sourcing of hose-tubing guards identified by NSN 4720013433671. The contractor is responsible for delivering two units that must be packaged according to RP001 and marked in compliance with MIL-STD-129. The project falls under NAICS code 332999 and requires the contractor to have the capability to handle technical data restricted by ITAR or EAR. The solicitation was posted on September 3, 2026, with a response deadline of September 14, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE