Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

First Article Testing and Validation Services

Open

Federal

Response Deadline11/16/2026, 12:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for First Article Testing and Validation Services supports the DLA Weapons Support Land Supply Chain. The selected contractor will perform First Article Testing for prime contractors to validate the form, fit, and function of two units against the next higher assembly. All testing activities will be conducted at Robins Air Force Base, and the final deliverable is a completed First Article Test Report along with the necessary first article exhibits. Due to the nature of the work, the contractor must maintain strict ITAR and EAR compliance and secure the necessary base access for performance. The project falls under NAICS code 336414 and is managed by the Department of Defense. Interested parties must respond by November 16, 2026.

General Info

First Article Testing and Validation Services for DLA Weapons at Robins Air Force Base.

Agency

Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

NAICS

336414 - Guided Missile and Space Vehicle Manufacturing

Place of Performance

ROBINS A F B, GA, 31098-1887, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L1-27-T-4310.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

COVER, ACCESS

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 6

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 12:00:00 PM ESTin 9 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs First Article Testing (FAT) for prime contractors on DLA Weapons Support Land Supply Chain projects. Validates form, fit, and function of two units against the next higher assembly at Robins Air Force Base. Provides first article exhibits and test reports. Requires ITAR/EAR compliance and base access. Delivers a completed First Article Test Report.

Similar Contracts

Same NAICS industry code

Precision Machining and Fabrication of Access CoversThis subcontract involves the precision machining and fabrication of four Access Cover components, identified by NSN 5340-00-771-8370, for the DLA Weapons Support Land Supply Chain. The contractor is responsible for fabricating parts in strict accordance with provided Technical Data Packages and Reference Drawings, specifically 98752 and 98897. Notably, the use of additive manufacturing is strictly prohibited for this project, and all finished covers must be packaged according to MIL-STD-129 standards. To be eligible, the provider must maintain ISO 9001:2015 certification and comply with NIST SP 800-171 and CMMC Level 2 cybersecurity requirements. The work is associated with NAICS code 336414 and will be performed at Robins Air Force Base. Interested parties must respond by November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Manufacturing and Supply of Aviation Tee HingesThis subcontract involves the manufacture and supply of Boeing Part Number 141T6946-23 Tee Hinges for prime contractors supporting DLA Weapons Support ASC projects. The contractor must produce two FAA-approved hinges in accordance with aviation airworthiness standards, employing either MIL-STD-1916 or ASQ H1331 sampling methods. All deliverables must be packaged and labeled according to MIL-STD-2073-1E and MIL-STD-129 standards. Compliance requirements are stringent, necessitating FAA airworthiness approval and CMMC Level 2 certification as mandated by DFARS 252.204-7012. The project falls under NAICS code 336414 and is managed by the Department of Defense. Performance for this contract is centered in Tracy, California.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

C-5 Aircraft Metal Tube Assembly FabricationThis subcontract involves the fabrication and supply of specialized metal tube assemblies for C-5 aircraft projects under the DLA Weapons Support Fluid Handling Division. The contractor is responsible for the precision bending, cutting, and welding of aerospace-grade metal tubing in strict accordance with NSN 4710-01-259-0699 specifications. The scope of work includes the delivery of four completed assemblies meeting precise aerospace tolerances, with performance taking place at Hill AFB. To ensure process validation, the contractor must conduct first article testing by delivering two initial units to ALCMC Warner Robins. This requirement is categorized under NAICS code 336414. Interested parties must respond by November 16, 2026, following the solicitation posted on November 6, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

FAA Airworthiness Approval and Quality Certification ServicesThis subcontract for FAA Airworthiness Approval and Quality Certification Services supports prime contractors on DLA Weapons Support ASC projects. The selected provider will perform critical inspection, testing, and certification tasks to grant FAA airworthiness approval, ensuring all parts are verified against QAP 13873 and CDRL-FAACERTCOM-25015. Technical execution requires the implementation of sampling plans according to MIL-STD-1916 or ASQ H1331, and the contractor must possess FAA Airworthiness Approval authority while maintaining strict compliance with Procurement Note L32. The primary deliverables for this engagement include quality reports and official FAA Airworthiness Approval certifications. The work is associated with NAICS code 336414 and will be performed in New Cumberland, Pennsylvania. This opportunity is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Radome Teardown, Evaluation, and Structural RepairThis subcontract involves the technical teardown, evaluation, and structural repair of Radome assemblies for prime contractors supporting NAVSUP Weapon Systems Support projects. The contractor is responsible for delivering a repaired Radome under NSN 1560-01-541-5158, ensuring all work adheres to Technical Specification 74A301001-1003. Additionally, the provider must apply unique item identifiers in accordance with ISO/IEC 16022 and MIL-STD-130 standards. To successfully execute the contract, the provider must possess specialized composite repair equipment and the capability to report through the CAV Repairables Portal. This Department of Defense project falls under NAICS code 336414, with a response deadline set for January 5, 2027.

Navsup Weapon Systems Support

POSTED

DEADLINE

in about 2 months

Precision Aerospace Shim ManufacturingThis subcontract involves the manufacture of 39 precision shims for prime contractors supporting DLA Weapons Support ASC landing gear projects. The parts must be produced according to NSN 5365004504409 specifications using precision machining, with a strict prohibition on the use of additive manufacturing. All delivered items must be bare-item marked and fully inspected. The contractor is required to maintain quality systems compliant with SAE AS9003 or ISO 9001, with sampling conducted per MIL-STD-1916 or ASQ H1331. Performance will take place at Hill AFB under NAICS code 336414. The response deadline for this Department of Defense requirement is November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

First Article Test (FAT) Validation and ReportingThis subcontract, titled First Article Test (FAT) Validation and Reporting, is a total small business set-aside issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div. The primary objective is to perform First Article Testing for prime contractors to validate manufactured components intended for DLA supply contracts. This process involves conducting rigorous testing on the first production unit to verify functional performance, material integrity, and dimensional accuracy utilizing CMM and metrology equipment. The successful contractor is responsible for delivering a validated prototype and a certified FAT report for government approval. Performance for this contract will take place at Robins Air Force Base. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026, falling under NAICS code 336414.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Precision Aerospace Fabrication of Access CoversThis subcontract for the Department of Defense and DLA Weapons Support Land Supply Chain involves the precision aerospace fabrication of two machined access covers to be performed at Tinker AFB. The scope of work includes precision machining and forming according to ASME Y14.5 standards, spot welding of clad material per AWS D17.2/17.2M, and the trimming of skin edges. Fabrication must utilize specific materials compliant with SAE AMS QQ-A-250/5 and SAE AMS QQ-A-250/13. Due to the nature of the project, the contractor must maintain CMMC Level 2 certification and ensure full ITAR and EAR compliance. The solicitation was posted on November 5, 2026, with a response deadline of November 16, 2026. This effort falls under NAICS code 336414 and supports prime contractors within the land supply chain.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Vehicular Cab Insulation Panels (NSN 2540015084811)This subcontract involves the manufacture or procurement of 133 specialized insulation panels for vehicular cabs, specifically meeting NSN 2540015084811 specifications. The project supports prime contractors delivering for the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament agency, with performance taking place in Tracy, California. The contractor must ensure strict adherence to MIL-STD-129 and DFARS 252.223-7008 regarding hexavalent chromium. Additionally, the agreement mandates full compliance with the Buy American Act and NIST SP 800-171 cybersecurity standards. The solicitation was posted on November 5, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Aerospace Hydraulic Testing and CertificationThe Aerospace Hydraulic Testing and Certification subcontract involves providing specialized final pressure testing, leak testing, and quality certification for prime contractors supporting DLA Weapons Support ASC projects. The scope of work focuses on the functional testing of hydraulic valves to ensure zero leakage and precise actuation, utilizing clean-room environments and hydraulic test benches. All activities must result in validated valve assemblies and comprehensive certification documentation for Critical Application Items, adhering strictly to ISO 9001:2015 or SAE AS9003 standards. This opportunity is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, with performance located in New Cumberland. The project falls under NAICS code 336414. Interested parties should note the response deadline of November 13, 2026, to provide the required certified test reports and technical validation services.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Fuel Cover Assembly SupplierThis subcontract involves the manufacture or procurement of a Fuel Cover Assembly for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Land Supplier Opns Engines. The supplier must ensure the assembly meets NSN 011248950 specifications and adheres to the DLA Master List of Technical and Quality Requirements. Final products must be packaged and labeled according to MIL-STD-129, RP001, and ASTM D3951 standards for delivery to Cherry Point. Compliance requirements for this contract include a CMMC Level 2 Self-Assessment and adherence to the Buy American Act. The scope of work culminates in the delivery of one completed and labeled Fuel Cover Assembly. Interested parties should note the response deadline of November 16, 2026, and the classification under NAICS code 336414.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Control Wheel Final Machining and AssemblyThis subcontract, titled Control Wheel Final Machining and Assembly, involves performing final machining and assembly for prime contractors on DLA Weapons Support ASC projects. The scope of work requires the use of CNC milling and turning centers to machine cast blanks to final dimensions and the installation of hardware for Boeing part number 9-51579-2. The final deliverables are finished Control Wheel Assemblies, which must undergo final inspection according to MIL-STD-1916 or MIL-STD-105/ASQ Z1.4 standards. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, with performance taking place at Tinker AFB. To be eligible, contractors must maintain SAE AS9003 or ISO 9001 certification and ensure full compliance with the Boeing Rights Guard license. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026, falling under NAICS code 336414.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

Same awarding agency

Grommet Assembly Fabrication and SupplyThis subcontract involves the manufacture and supply of five completed Grommet Assembly units for prime contractors supporting the DLA Weapons Support Land Supply Chain. The fabrication process must strictly adhere to Basic Drawing NR 53711 5959323 Revision NR DTD 01/01/1939 and TDP Rev A Gen 3, with identification marking applied according to MIL-STD-130N. The contractor is required to comply with the Buy American Act and maintain safeguards for covered defense information as specified by DFARS regulations. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332999.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Supplier of Plain Encased Seals (NSN 5330-01-312-3700)This subcontract involves the supply of one Plain Encased Seal, part number H18AM and NSN 5330-01-312-3700, for prime contractors supporting the DLA Weapons Support Land Supply Chain. The required seals must be asbestos-free in accordance with FED-STD-313 and must be delivered within five days of the order. Performance for this contract will take place at Fort Eustis. The supplier is responsible for packaging the items in medium duty, waterproof, greaseproof, and opaque bags as specified by MIL-DTL-117. Additionally, all items must be marked and labeled according to MIL-STD-2073-1E and MIL-STD-129 standards. This procurement falls under NAICS code 339999 for the Department of Defense.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Manufacture and Supply of Access Covers (NSN 5340014090972)This subcontract involves the manufacture and supply of 377 specialized access covers for prime contractors working on Department of Defense projects under the DLA Weapons Support Land Supply Chain. The fabrication must strictly adhere to Drawing NR 19207 12273848 and 19207 12273849, Revision D, utilizing precision metal fabrication equipment. Performance will take place in New Cumberland, Pennsylvania. The contractor is required to maintain strict regulatory compliance, including MIL-STD-129 for marking and DFARS 252.223-7008 regarding the use of hexavalent chromium. Additionally, the provider must meet DFARS 252.204-7012 cybersecurity standards to ensure the protection of sensitive information. The project falls under NAICS code 332710.

POSTED

DEADLINE

Fabrication and Supply of Valve Actuator GuardsThis subcontract involves the fabrication and supply of 1,282 Valve Actuator Guards for the DLA Weapons Support Land Supply Chain. The manufacturer is responsible for producing the units according to Army and DCSC Drawing 16236 CS-2300-0001 specifications, applying Chemical Agent Resistant Coatings, and adhering to MIL-STD-1916 zero-based sampling standards. Finished, coated, and packaged guards must be delivered to DLA Distribution Barstow. To be eligible for this project, the contractor must maintain CMMC Level 2 and ITAR compliance. The work falls under NAICS code 332311 and is managed under the Department of Defense. Interested parties must respond by November 16, 2026.

Prefabricated Metal Building and Component Manufacturing

POSTED

DEADLINE

Loop Clamp Manufacturing and SupplyThis subcontract involves the manufacture or sourcing of 32 loop clamps, part number 7019031310, for prime contractors supporting the DLA Weapons Support Land Supply Chain. The contractor is responsible for ensuring all units meet strict technical specifications and adhere to specific military standards for marking, palletization, and packaging, specifically MIL-STD-129, RP001, and MIL-STD-2073-1E. Additionally, any hazardous items must be labeled in accordance with the Hazard Communication Standard 29 CFR 1910.1200. The final deliverables must be shipped to the DLA Distribution DDSP New Cumberland Facility in New Cumberland. This procurement falls under NAICS code 332510 and is managed under the Department of Defense. The response deadline for this requirement is November 16, 2026.

Hardware Manufacturing

POSTED

DEADLINE

Military-Grade Packaging and Labeling ServicesThis subcontract opportunity is for the provision of military-grade packaging and labeling services to support prime contractors on DLA Weapons Support Land Supply Chain projects. The selected provider will be responsible for supplying all necessary packaging materials and performing final packing and marking for 31 ball joints. All work must be executed in strict accordance with ASTM D3951 for packaging and MIL-STD-129 for marking and labeling, with delivery handled on an FOB Origin basis. The project is designated as a Total Small Business Set-Aside under NAICS code 488510 and is managed by the Department of Defense. Performance will take place in New Cumberland, Pennsylvania. Interested parties must possess specialized expertise in DLA packaging and marking standards to ensure compliance with all military specifications.

Freight Transportation Arrangement

POSTED

DEADLINE

First Article Test (FAT) ServicesThis subcontract opportunity is for First Article Testing services supporting the DLA Weapons Support Land Supply Chain. The selected provider will validate manufacturing processes for prime contractors by testing sample units against the technical data package using strength testing and metrology equipment. A formal test report must be delivered within 30 calendar days of the contract date. The project is a total small business set-aside under NAICS code 541380, with performance located in New Cumberland. Due to the nature of the work, the contractor must maintain ITAR and EAR compliance as well as CMMC Level 2 certification. Responses are due by November 16, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

Precision Ball Joint Fabrication (NSN 3040-01-483-1204)This subcontract opportunity is for the precision machining, manufacture, and supply of 31 specialized ball joints for the DLA Weapons Support Land Supply Chain. All components must be fabricated in accordance with NSN 3040-01-483-1204 and the DLA Master List of Technical and Quality Requirements. The project mandates strict adherence to MIL-STD-1916 or ASQ H1331 sampling standards and requires compliance with Berry Amendment domestic material restrictions. The contract is designated as a Total Small Business Set-Aside under NAICS code 332710, with performance located in New Cumberland. Qualified bidders must hold ITAR/EAR and CMMC Level 2 certifications to be eligible. Responses are due by November 16, 2026, for the delivery of the finished ball joints.

POSTED

DEADLINE

MIL-STD Packaging and Marking for DLA HardwareThis subcontract involves providing military-grade packaging and marking services for prime contractors supporting the Department of Defense DLA Weapons Support Land Supply Chain. The scope of work focuses on the processing of springs, ensuring all items are packaged according to MIL-STD-2073-1E and marked in accordance with MIL-STD-129 for Critical Application Items. The contractor is required to use MIL-SPEC packaging materials and industrial labeling systems to ensure all deliverables are ready for FOB Origin shipment. The project is categorized under NAICS code 339999 and will be performed in Greensboro, North Carolina. Interested parties must note the response deadline of November 16, 2026, following the posting date of November 6, 2026.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Supply of High-Grade Spring Steel/Alloy WireThis subcontract involves the supply of raw high-tensile spring steel or specialized alloy wire to support prime contractors for the DLA Weapons Support Land Supply Chain. The provided materials must strictly adhere to the tensile strength requirements specified under NSN 5360-01-488-6184. To ensure quality and compliance, the supplier is required to provide Material Test Reports and Certificates of Conformance with all deliveries. The contract mandates full compliance with the Buy American Act and the Balance of Payments Program. Performance for this requirement is centered in Greensboro, North Carolina, under NAICS code 332613. Interested parties must submit their responses by November 16, 2026.

Spring Manufacturing

POSTED

DEADLINE

Manufacture of Helical Compression Springs (NSN 5360-01-488-6184)This subcontract involves the manufacture of 34 custom helical compression springs under NSN 5360-01-488-6184 for the DLA Weapons Support Land Supply Chain. The scope of work includes coiling spring wire, heat treating, stress relieving, grinding ends for squareness, and applying surface finishes in accordance with the DLA Master List. The project will be performed in Greensboro, North Carolina, under NAICS code 332613. To qualify, the contractor must utilize precision coiling machines and maintain NIST SP 800-171 compliance. The use of additive manufacturing is strictly prohibited for this contract. Interested parties must respond by November 16, 2026.

Spring Manufacturing

POSTED

DEADLINE

Supply of Bail HandlesThis subcontract involves the manufacture or procurement of 357 bail handles for prime contractors supporting Defense Logistics Agency projects under the DLA Weapons Support Land Supply Chain. The contractor is responsible for ensuring all units meet specific part requirements and are delivered FOB Origin to Tracy, California. Strict adherence to military standards is required, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Additionally, the provider must comply with IP025 and DFARS 252.223-7001 regarding the handling of hazardous materials and must maintain CMMC Level 2 certification.

Wood Container and Pallet Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS