Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

First Article Testing and Validation Services

Active

Federal

Response Deadline10/23/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for First Article Testing and Validation Services supports prime contractors on DLA Weapons Support ASC aerospace projects. The selected provider will perform inspections and tests in accordance with MIL-STD-1916 or ASQ Z1.4 to validate manufacturing processes, utilizing certified measuring and test equipment per RT001. The primary deliverable for this engagement is a completed First Article Test Report. The work is performed at Robins Air Force Base and falls under NAICS code 541380. Due to the nature of the technical data involved, the contractor must maintain CMMC Level 2 certification. Interested parties must respond by October 23, 2026.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

NAICS

541380 - Testing Laboratories and Services

Place of Performance

ROBINS A F B, GA, 31098-1887, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-27-T-1327.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PANEL, INDICATING, LIGHT

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 15

subcontract

Response DeadlineOct 23

Submission deadline

Response Deadline

10/23/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs first article testing (FAT) and validation for prime contractors on DLA Weapons Support ASC aerospace projects. Conducts inspections and tests per MIL-STD-1916 or ASQ Z1.4 using certified measuring and test equipment (M&TE) per RT001 to validate manufacturing processes. Requires CMMC Level 2 for technical data handling. Delivers a completed First Article Test Report.

Similar Contracts

Same NAICS industry code

Specialized Testing & Quality AssuranceThis subcontract for Specialized Testing and Quality Assurance involves performing First Article Testing and Production Lot Testing for prime contractors under DLA Troop Support supply contracts. The scope of work requires the execution of tests using tensile strength and load cell equipment in strict accordance with SOP-PHST-077C, QAP 14153 SQAP-FAT3, and SQAP-PLT3. Additionally, the provider is responsible for certifying Critical Application Items per TECH SPEC PHST-077C and delivering the corresponding Test Reports and Certifications of Conformance. The project is managed under NAICS code 541380 for the Department of Defense, with the place of performance located in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 26, 2026, for this specialized quality assurance requirement.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 7 hours ago

DEADLINE

First Article Testing for Aircraft Universal JointsThis subcontract involves performing First Article Testing for aircraft universal joints on behalf of prime contractors for the DLA Weapons Support ASC Commodities Division. The scope of work requires the validation of one unit against Basic Drawing NR 98897 4C95010, utilizing certified Measuring and Test Equipment in accordance with requirement RT001. Due to the nature of the technical data involved, strict adherence to ITAR and EAR compliance is mandatory. The final deliverables include the tested unit and a comprehensive FAT validation report, both of which must be delivered to Robins AFB in Georgia. This project falls under NAICS code 541380 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Independent Testing and Inspection for Critical Safety ItemsThis subcontract, titled Independent Testing and Inspection for Critical Safety Items, involves providing independent verification, pressure testing, and quality inspection services for prime contractors on DLA Weapons Support ASC fuel system projects. The scope of work includes conducting sampling according to MIL-STD-1916 or ASQ H1331 and verifying bare item marking per RQ017, utilizing calibrated M&TE in accordance with RT001. The selected provider is responsible for delivering comprehensive inspection reports, pressure test results, and Certificates of Conformance. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, the performance of this contract will take place in Jacksonville, Florida. The opportunity is categorized under NAICS code 541380, with a response deadline set for October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 7 hours ago

DEADLINE

Quality Assurance and Inspection Services for Aviation Impellers

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

Aerospace Component Inspection and TestingThe Aerospace Component Inspection and Testing subcontract involves providing specialized inspection and testing services for prime contractors supporting DLA Weapons Support ASC projects. The scope of work focuses on dimensional verification and non-destructive testing of critical application items, utilizing advanced tools such as CMM and ultrasonic or X-ray equipment. The contractor is responsible for executing zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331 standards, ensuring RT001 equipment compliance, and delivering all necessary inspection reports and certifications of conformance. This project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place at Tinker AFB. The opportunity falls under NAICS code 541380. Interested parties should note the response deadline of October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

Aerospace Component Testing and Quality AssuranceThe Aerospace Component Testing and Quality Assurance subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves the independent testing, calibration, and quality certification of fluid-hydraulic pressure transducers. The selected provider will be responsible for verifying transducer accuracy and pressure ratings, ensuring compliance with FAA airworthiness standards, and validating Bare Item Marking per RQ046 using hydraulic pressure test benches. All work is to be performed at Tinker AFB, and the contractor must deliver comprehensive test reports and Certificates of Conformance. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380. To be eligible, the contractor must possess ISO 9001:2015 certification and FAA-recognized certification capabilities. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Magnetic Particle Inspection Services for Aerospace FastenersThis subcontract for Magnetic Particle Inspection Services for Aerospace Fasteners involves performing specialized inspections on sleeve nuts for prime contractors supporting DLA supply contracts. The work must be executed in accordance with ASTM E1444 standards using either portable or wet/dry bench MPI equipment, specifically following the requirements outlined in Drawing Page 3 Frame 2 Note 4. Performance will take place in New Cumberland, Pennsylvania. To ensure quality and compliance, the service provider must operate out of an ISO 9001 or AS9003 certified facility and employ inspectors who hold NAS 410 certification. The primary deliverables for this engagement include the delivery of passed components along with their corresponding certified inspection reports. This opportunity is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Product Verification Testing (PVT) Services

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

Aerospace Component Quality Validation & TestingThis subcontract for Aerospace Component Quality Validation and Testing involves performing Production Lot Testing for prime contractors under the DLA Weapons Support ASC Commodities Division. The primary objective is to validate the quality conformance of aerospace rivets by testing random samples against Technical Data Package tolerances. The selected provider will be responsible for coordinating with Government Quality Assurance Representatives and delivering essential documentation, including test reports, material and process certifications, and DD Form 1423. The work is to be performed at Tinker AFB and requires the contractor to maintain ISO 9001:2015 and JCP certifications. This opportunity falls under NAICS code 541380, with a response deadline set for October 23, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Specialized Aerospace Testing and Inspection

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 7 hours ago

DEADLINE

MIL-S-901 Shock Extension Testing

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 7 hours ago

DEADLINE

Non-Destructive Testing (NDT) and CertificationThis subcontract opportunity with the Department of Defense, specifically for the DLA Weapons Support Land Supply Chain, involves providing specialized non-destructive testing (NDT) services. The selected contractor will be responsible for executing inspection protocols to verify the material density and structural integrity of naval control components. All work is to be performed in Mechanicsburg, Pennsylvania, under NAICS code 541380. To be eligible, the contractor must hold RQ040 Non-Destructive Testing Accreditation. The primary deliverables for this engagement include a certified NDT Inspection Report and a formal certification of compliance. The solicitation was posted on October 15, 2026, with a response deadline of October 26, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Supply of Data Entry Joysticks (NSN 5895-01-568-1533)This subcontract involves the supply of 18 data entry joysticks, specifically HurleyIR part number RP-M1-DACP, to support prime contractors delivering for the DLA Weapons Support ASC. The contractor is responsible for manufacturing or sourcing the units and ensuring strict adherence to quality assurance sampling standards per MIL-STD-1916 or ASQ H1331. Additionally, all items must be marked according to RQ017 and packaged in compliance with ASTM D3951 and MIL-STD-129. The agreement requires full compliance with DLA RA001 and RC001 requirements. The project falls under NAICS code 334290 and is managed by the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div. Performance of the contract is centered in New Cumberland, Pennsylvania.

Other Communications Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

Back Fairing (NSN 1680-99-737-6673) SupplyThis subcontract involves the supply of three Back Fairings, identified by NSN 1680-99-737-6673, for prime contractors supporting DLA Aviation life support items. The selected provider must manufacture or source the items according to specific technical data, with a strict prohibition on additive manufacturing. Compliance requirements include bare item marking per RQ017 and the implementation of zero-based sampling following MIL-STD-1916 or ASQ H1331 standards. The contractor is responsible for packaging the fairings in accordance with ASTM D3951 and MIL-STD-129. To be eligible, the supplier must be an approved source of supply or an authorized dealer. This requirement is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located at Robins Air Force Base.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

MIL-SPEC Packaging and Marking Services

Freight Transportation Arrangement

POSTED

about 7 hours ago

DEADLINE

Electro-Mechanical Linear Actuator Fabrication

Other Electronic Component Manufacturing

POSTED

about 7 hours ago

DEADLINE

Machine Thread Plug Supplier (NSN 5365010857814)This subcontract involves the manufacture or procurement of 106 machine thread plugs, identified by NSN 5365010857814, to support prime contractors for the DLA Weapons Support ASC. The project requires precision machining and strict adherence to quality control standards, specifically requiring sampling and inspection per MIL-STD-1916 or ASQ H1331. All deliverables must be packaged, marked, and palletized according to MIL-STD-2073-1E, MIL-STD-129, and RP001 standards. The contract is issued by the Department of Defense under NAICS code 332722, with performance taking place in Phoenix, Arizona. The supplier must ensure full compliance with the Buy American Act and deliver the 106 units FOB Origin. Interested parties must respond by October 23, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Aerospace/Defense Grade Plate StockThis subcontract involves the supply of aerospace and defense grade raw metal plate stock for prime contractors working on DLA Weapons Support ASC projects. The provider is responsible for sourcing materials that strictly adhere to the Buy American Act and Berry Amendment as outlined in TDP Rev A Gen. To ensure quality and compliance, the supplier must provide Material Test Reports and Certificates of Conformance upon delivering the certified raw material stock to the manufacturer. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the contract falls under NAICS code 331210. Performance for this requirement is centered in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 23, 2026, for this specific procurement action.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 7 hours ago

DEADLINE

Manufacturing of Plate, Element Support (NSN 2915-00-877-0142)This subcontract involves the precision machining and fabrication of 13 Element Support Plates under NSN 2915-00-877-0142 for the DLA Weapons Support ASC. The contractor must adhere to TDP Rev A Gen specifications and utilize ISO 9001:2015 quality systems and MIL-STD-1916 sampling to ensure production standards are met. Strict regulatory compliance is required, including CMMC Level 2 certification and adherence to the Berry Amendment. Finished units must be inspected and packaged according to MIL-STD-2073-1E for delivery to DLA Distribution DDSP New Cumberland. The project falls under NAICS code 332710 and is managed by the Department of Defense.

POSTED

about 7 hours ago

DEADLINE

Electrical Insulation Sleeving SupplyThis subcontract involves the supply of 2,084 feet of electrical insulation sleeving to prime contractors supporting the Department of Defense DLA Weapons Support ASC Supplier Oper AE and AF Div. The materials must be manufactured or sourced in accordance with SAE AS23053C and SAE AS23053/5 standards, delivered on reels or spools, and must maintain a minimum shelf life of 60 months. Performance will take place in Tracy, California, under NAICS code 335931. Strict adherence to federal guidelines is required, including packaging and marking per MIL-STD-2073-1E and MIL-STD-129. The supplier must ensure compliance with DFARS 252.204-7012 and provide hazardous material labeling as mandated by 29 CFR 1910.1200. The response deadline for this opportunity is October 23, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 7 hours ago

DEADLINE

Aircraft-Grade Textile SupplyThis HUBZone set-aside subcontract involves the supply of raw aircraft-grade textiles and sewing materials for prime contractors working on DLA Weapons Support ASC projects. The materials must strictly adhere to the technical specifications for NSN 1680-99-733-2813 and be delivered with Certificates of Conformance. Performance for this contract takes place at Robins Air Force Base. The supplier is required to certify that all materials are of domestic origin in compliance with the Berry Amendment and the Buy American Act. Additionally, the provider must furnish Safety Data Sheets as mandated by FAR 52.223-3. This procurement falls under NAICS code 313210 and is managed by the Department of Defense.

Broadwoven Fabric Mills

POSTED

about 7 hours ago

DEADLINE

Aircraft Seat Cushion Cover FabricationThis HUBZone set-aside subcontract involves the fabrication of 38 aircraft seat cushion covers for the Department of Defense, specifically supporting the DLA Weapons Support ASC. The contractor is required to manufacture the covers according to NSN 1680-99-733-2813 using non-additive manufacturing processes. All work must strictly adhere to the Berry Amendment and the Buy American Act to ensure domestic sourcing compliance. Quality control must be performed in accordance with MIL-STD-1916 or ASQ H1331, with final products packaged according to ASTM D3951 and MIL-STD-129 standards. The place of performance is located at Robins Air Force Base. Interested parties must respond by October 23, 2026, under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

Aerospace Parts Kit Assembly and Packaging

All Other Miscellaneous Manufacturing

POSTED

about 7 hours ago

DEADLINE

Precision Component Manufacturing for Actuator Overhaul Kit

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS