Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

First Article Testing (FAT) and Production Lot Testing (PLT) Services

Active

Federal

Response Deadline09/04/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 4

subcontract

Response DeadlineSep 4

Submission deadline

Response Deadline

09/04/2026, 05:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform First Article Testing (FAT) and Production Lot Testing (PLT) for the CSI item, including test execution, documentation, and submission to government authorities.

Similar Contracts

Same NAICS industry code

Electrical Systems Testing

Solicitation # 6365

The City of Salem, Oregon is soliciting bids for Electrical Systems Testing under Solicitation Number 6365, with a response deadline of August 19, 2026, at 6:00 PM Pacific Time. The bid opportunity was posted on August 4, 2026, and is open to qualified contractors capable of performing comprehensive testing of electrical systems in alignment with applicable codes and standards. All work is expected to be performed within the state of Oregon, though the specific location within the state has not been detailed. The primary point of contact for inquiries is the Contracts and Procurement office, reachable via email at contracts@cityofsalem.net. Bidders must submit their proposals through the official portal linked in the solicitation details, as no alternative submission methods are indicated. There is no set-aside designation specified for this solicitation, making it open to all eligible respondents regardless of business size or ownership category.

City of Salem, OR

POSTED

about 2 hours ago

DEADLINE

Alcohol and Controlled Substances Testing

Solicitation # 3344-26

Nueces County is seeking qualified vendors to implement a comprehensive alcohol and controlled substances testing program for its safety-sensitive employees, including approximately 30 commercial motor vehicle drivers subject to Federal Motor Carrier Safety Administration regulations, 750 additional employees covered under the Drug-Free Workplace Act of 1984, and up to 1,200 employees subject to reasonable suspicion testing. The contracted vendor must provide full-service testing capabilities including breath alcohol and split urine specimen collection, laboratory analysis, Medical Review Officer services, physical exams, respirator fit testing, immunizations, vision and audiometric screenings, and all related administrative and compliance support. The program must align with federal standards under 49 CFR Parts 40 and 382, including integration with the FMCSA Clearinghouse, and the vendor will be responsible for ensuring regulatory compliance, maintaining strict chain-of-custody protocols, and delivering timely and accurate reporting. The contract will run for an initial term of thirty-six months with the possibility of two twelve-month renewals, contingent on mutual agreement, and if no successor contract is awarded, the vendor must continue services on a month-to-month basis until replaced. Proposals must be submitted electronically via PublicPurchase.com by the deadline, with physical submissions accepted only if online access is unavailable, requiring one signed original and one PDF on a USB drive in a sealed envelope labeled with the RFP number and project name. The contract administrator is Jim Landers, Human Resources Director, and submissions should be directed to Michael Robinson, Purchasing Agent, at the Nueces County Courthouse. The county currently relies on Alliance for testing services, and the vendor selected will assume responsibility for all current and anticipated testing volumes, including projected increases in non-DOT tests over the next fiscal years. All required forms, qualifications, and documentation must be completed and submitted as specified, with no deviations permitted from the RFP requirements.

POSTED

about 8 hours ago

DEADLINE

Automated Scanning System

Solicitation # N00421-27-NORFP-AB23000-0001

The U.S. Navy, through Naval Air Systems Command, intends to award a sole-source, firm-fixed-price contract to NDT Solutions for the development of an automated scanning system software suite utilizing artificial intelligence and machine learning to enhance nondestructive inspection capabilities for composite bond lines on MQ-4C aircraft. This effort supports the Air Systems Group’s Material Engineering Division, specifically the Nondestructive Inspection Branch, and is designed to assist NDI Level IIIs in detecting, sizing, and characterizing defects during phased array ultrasonic inspections using the AUSS Mobile system. The acquisition is justified under USC 2304(c)(1) and FAR 6.302-1 due to the unique and proprietary nature of the required technology, with no other source capable of meeting the agency’s specific needs. The contract will be processed under FAR Parts 12 and 13.5 as a commercial acquisition. This notice is not a solicitation for competitive bids but serves as an opportunity for other responsible parties to submit capability statements by 8:00 AM EST on August 19, 2026, to Liam Umek at liam.j.umek.civ@us.navy.mil solely to inform the government’s decision on whether to reopen the procurement for competition. No reimbursement will be provided for submissions, and all information provided becomes the property of the government. Offerors must be registered in the System for Award Management (SAM) to be considered. The delivered system will be shipped to the NDI Branch at 48066 Shaw Rd., Building 2188, Patuxent River, MD 20670, and the solicitation number for this action is N00421-27-NORFP-AB23000-0001, with a NAICS code of 541380.

POSTED

about 9 hours ago

DEADLINE

Test Pit and Soil Boring Advancement Phase II Environmental Site Assessment Royal Electric Yard, Sykesville, Maryland

Solicitation # 6913G626Q300046

Under an interagency agreement between the U.S. Department of Transportation’s John A. Volpe National Transportation Systems Center and the U.S. Environmental Protection Agency, a Phase II Environmental Site Assessment is being conducted at the Royal Electric Yard, a 4.1-acre parcel located at 7512 Main Street in Sykesville, Maryland, with the goal of investigating potential soil and groundwater contamination from historic automotive junking activities. A prior Phase I ESA identified likely presence of hazardous substances including used oils, brake and hydraulic fluids, gasoline, diesel fuels, mercury switches, asbestos, refrigerants, metals, batteries, and antifreeze, primarily in the northern wooded portion of the site, prompting the need for subsurface investigation. The scope includes advancing up to ten soil borings organized in a sitewide grid and up to six test pits near known debris piles, supported by geophysical surveys using electromagnetic conductivity, ground penetrating radar, and magnetometry to detect buried metallic and non-metallic objects. Sampling and analysis must adhere to ASTM E1903-19 standards, Maryland Department of the Environment residential soil cleanup criteria, and Volpe’s Generic Quality Assurance Project Plan and Standard Operating Procedures, with all samples requiring proper labeling, preservation, and shipping via approved containers, chain-of-custody documentation, and cooling to maintain integrity. The work is to be performed under a firm-fixed-price contract, fully funded at award for CLIN 00100, with a performance period from August 24 to December 1, 2026, and is set aside exclusively for small businesses. Contractors must possess valid certifications to execute the work, be registered in SAM with a current Unique Entity Identifier, and comply with extensive federal regulations including security prohibitions, data safeguarding requirements, service contract labor standards, Buy American provisions, and counter-trafficking policies. Proposal submission is required via email by August 11, 2026, and must include a completed SF-1449, a detailed firm-fixed-price breakdown covering labor, equipment, lab analysis, permits, and survey costs, and a two-page technical narrative demonstrating understanding of the work plan, site conditions, sampling methodology, and operational efficiencies. Deliverables include draft and final work plans, a call-before-you-dig notification, a geophysical survey report, and a final Phase II ESA report with analytical data, findings, and recommendations. All soil and debris deemed grossly contaminated must be segregated into metal drums or equivalent containers for offsite disposal

6913G6 Volpe National Transportation System Cntr

POSTED

about 9 hours ago

DEADLINE

USCG Base San Juan Stormwater Discharge Monitoring

Solicitation # 31170PRSDM

The US Coast Guard Base in Old San Juan, Puerto Rico, is seeking quotes for stormwater discharge monitoring services under solicitation number 31170PRSDM, with a response deadline of August 12, 2026 at 4:00 PM. A mandatory site visit is scheduled for August 6, 2026, at 9:00 AM, and interested parties must review the attached Statements of Work prior to attending. Access to the facility requires coordination with the designated points of contact, Abdiel J. Garraton and Dagmar Torres, who can provide necessary details for entry. Quotes must be submitted to juan.e.caporoure2@uscg.mil and must reference the notice ID in the email. The effort falls under NAICS code 541380 and is not subject to any small business set-aside. The contracting office is located in Norfolk, Virginia, under the Department of Homeland Security’s LOG-9 division.

POSTED

about 9 hours ago

DEADLINE

AAFC REQUEST FOR SUPPLY ARRANGEMENT - PMC Analysis of Pesticide Residues

Solicitation # CSC-2627-0278

The Government of Canada, through Agriculture and Agri-Food Canada, is soliciting offers to establish a supply arrangement for the chemical analysis of pesticide residues in crop samples collected from field trials across Canada and the United States. The analyses must adhere strictly to the OECD Principles of Good Laboratory Practices (rev 1997), approved study plans and amendments, and Health Canada’s Pesticides Regulatory Directorate Residue Chemistry Guidelines. The resulting data will support regulatory submissions for new minor pesticide uses, ensuring compliance with national safety and efficacy standards. Offerors must demonstrate capability to perform precise, compliant, and reproducible residue analyses under controlled conditions. The solicitation, identified as CSC2627-0278, was posted on August 4, 2026, with responses due by September 10, 2026. The contract will be managed by the Department of Agriculture and Agri-Food, with Kyle Harrington serving as the primary point of contact for technical and contractual inquiries. Performance of services will span multiple locations in Canada and the U.S., requiring logistical coordination and adherence to international regulatory frameworks. Offerors are expected to provide not only analytical expertise but also documentation and quality assurance protocols that meet the rigorous requirements of Health Canada’s regulatory review process for pesticide approvals.

Department of Agriculture and Agri-Food

POSTED

about 16 hours ago

DEADLINE

in about 1 month

CCTV Inspection ServicesInliner Solutions, LLC is seeking qualified businesses to provide closed-circuit television (CCTV) inspections of sewer lines to evaluate their condition and detect structural defects, blockages, or other issues requiring remediation. The contract is structured as a subcontract and is set aside specifically for Women-Owned Small Businesses, Veteran-Owned Small Businesses, Service-Disabled Veteran-Owned Small Businesses certified by the SBA, and minority- and women-owned enterprises holding nationally recognized certifications such as NMSDC and WBENC. The North American Industry Classification System code for this effort is 541380, indicating it falls under other scientific and technical consulting services. Interested parties must submit responses by September 4, 2026, and the work is expected to occur at various locations across Rockville, Maryland, though exact project sites are not specified. The posting date indicates this opportunity was made available in August 2026, and while no point of contact is listed, further details can be obtained through the provided link to the SBA opportunity page.

Inliner Solutions, LLC

POSTED

about 17 hours ago

DEADLINE

in about 1 month

Water Quality Laboratory TestingWharton-Smith, Inc. is seeking qualified subcontractors to provide primary and secondary water quality laboratory testing services for regulatory compliance, encompassing bacteriological, chemical, and physical analyses. The contract is classified as a subcontract under NAICS code 541380 and is designated as a Disadvantaged Business Enterprise (DBE) opportunity through the Department of Transportation, aiming to promote participation from certified minority- and socially disadvantaged-owned businesses. Testing services will support water infrastructure projects, particularly related to the Cypress Lake WTP Wellfield Raw Water Main in Osceola County, Florida, though specific performance locations are not detailed. The solicitation was posted on August 4, 2026, with a response deadline of August 19, 2026, and interested parties must submit proposals through the designated federal opportunity portal linked in the contract information. All work must adhere to applicable regulatory standards and quality assurance protocols for water safety and compliance.

Wharton-Smith, Inc.

POSTED

about 17 hours ago

DEADLINE

Testing & Inspection ServicesThe contract awards testing and inspection services essential to construction quality assurance, covering soil, concrete, and weld analysis along with third-party oversight to ensure compliance with engineering and safety standards. All work must adhere to rigorous QA/QC protocols throughout the project lifecycle, with services delivered at an unspecified construction site under a fixed-price design-build structure. The procurement is exclusively reserved for small businesses as defined by the SBA, including categories such as Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone firms, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses, ensuring opportunities for underrepresented entrepreneurs. The solicitation was posted in August 2026 with a submission deadline in September 2026, and it falls under the NAICS code 541380, which classifies it as environmental and other technical services. The contracting entity is Filanc, and performance is expected to occur at the Buccaneer Lift Station project location, though specific geographic details are not provided.

POSTED

about 17 hours ago

DEADLINE

in about 1 month

Materials TestingManson Construction Co. is seeking subcontractors to perform comprehensive laboratory and field testing of concrete, soil, steel, and related materials to support quality assurance efforts on a structural repair project. The contract is designated as a subcontract under NAICS code 541380 and is specifically set aside for participation by Disadvantaged Business Enterprises (DBE) accredited by the Department of Transportation, Disadvantaged Veteran Business Enterprises (DVBE) certified by the State of California, Minority Business Enterprises (MBE) certified by NMSDC, and Women Business Enterprises (WBE) certified by WBENC. The solicitation was posted on August 4, 2026, with a strict response deadline of August 6, 2026. Testing activities will be performed in support of a structural repair initiative tied to the NCMT Berth 24-11 project, and interested certified businesses must submit proposals before the deadline to be considered for award.

Manson Construction Co.

POSTED

about 17 hours ago

DEADLINE

Acoustic Performance TestingThe contract requires acoustic performance testing of demising walls and partitions to ensure compliance with specified Sound Transmission Class ratings of STC 50, STC 45, and STC 40, focusing on sound transmission control between adjacent spaces. The work is critical for verifying that construction assemblies meet established auditory privacy and noise reduction standards in occupied environments, particularly within multi-tenant or high-density buildings where sound isolation is a regulatory or operational priority. Testing must be conducted in accordance with applicable industry protocols and documented to demonstrate adherence to the required STC thresholds. The solicitation is classified as a subcontract under NAICS code 541380, indicating specialized architectural and engineering services, and is managed by the DCP06 - Office of Leasing based in Massachusetts. The place of performance is specified as Floor Boston, 02108, and responses are due by September 17, 2026, at 7:00 PM. Contractors must be prepared to perform field measurements, interpret results against project specifications, and submit certified documentation to confirm compliance.

DCP06 - Office of Leasing

POSTED

DEADLINE

in about 1 month

Water sampling for the Coffield Unit

Solicitation # IW261703

The Texas Department of Criminal Justice is soliciting bids to establish a blanket purchase order for water sampling services at the Coffield Unit in Tennessee Colony, Texas. The solicitation, identified as IW261703, was posted on August 3, 2026, with a response deadline of August 17, 2026, at 9:00 PM Central Time. The services are intended to support ongoing water quality monitoring efforts at the facility, ensuring compliance with health and safety standards. This procurement is classified under a state, local, or educational government agency type and does not specify a set-aside category or NAICS code. All proposals must be submitted through the Texas SmartBuy portal, and inquiries should be directed to Kimberly Elsmore, the primary point of contact, via email at kimberly.elsmore@tdcj.texas.gov or phone at 936-437-3829. The work performance location is confirmed as the Coffield Unit in Texas, with no additional geographic restrictions specified.

Texas Department of Criminal Justice

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Supply of Fasteners (NSN 5307-01-212-4400)The contract pertains to the manufacture or supply of standardized fasteners identified by NSN 5307-01-212-4400, specifically for integration into defense systems. As a commercial item procurement, it mandates strict adherence to military specifications and federal supply chain standards to ensure compatibility, reliability, and interoperability within military equipment. The item falls under NAICS code 332312, classifying it as a manufacturing activity related to screw, bolt, and fastener production, and is being procured under a subcontract mechanism by the ASC Commodities Division of the Department of Defense. The solicitation was posted on August 4, 2026, with a response deadline of August 18, 2026, providing vendors with a two-week window to submit proposals. While no specific place of performance or point of contact is detailed, the procurement is governed by the Defense Logistics Agency’s procurement framework, as indicated by the official DIBBS portal link. All suppliers must meet the defense sector’s quality, documentation, and delivery requirements without any set-aside provisions for small or disadvantaged businesses, emphasizing a competitive, open-market approach aligned with DoD supply chain objectives.

Fabricated Structural Metal Manufacturing

POSTED

about 4 hours ago

DEADLINE

Cybersecurity Compliance and Assessment Support

Computer Systems Design Services

POSTED

about 4 hours ago

DEADLINE

in about 1 month

Supply Chain Traceability and Documentation Management

Administrative Management and General Management Consulting Services

POSTED

about 4 hours ago

DEADLINE

in about 1 month

Manufacturing and Supply of Critical Safety Item (CSI)

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in about 1 month

RING, RETAINING

Solicitation # SPE4A6-26-T-12LQ

This contract pertains to the procurement of retaining rings identified by NSN 5325-01-269-2248, with a quantity of 290 units to be delivered FOB origin within 171 days. The requirement is governed by stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with packaging and marking mandated to comply with MIL-STD-2073-1E and MIL-STD-129. Packaging must adhere to DLA-specific guidelines, including prohibited use of mercury or mercury-containing compounds in preservation, packaging, and marking, except for enumerated functional applications such as batteries, fluorescent lamps, and approved instruments, which must additionally feature shock-proof design and a secondary containment barrier in accordance with NAVSEA 5100-003D. The contract explicitly prohibits the intentional introduction of mercury into any supplied hardware. Delivery is to be made to the DLA Distribution San Joaquin receiving warehouse in Tracy, California, with no variance permitted in quantity. The item is flagged as a critical application, and documentation for source approval must meet specified requirements. The solicitation was issued under contract number SPE4A6-26-T-12LQ with a response deadline in August 2026, and the primary point of contact is Marchello Fields from the ASC Commodities Division.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

Solicitation # SPE4A6-26-T-11PM

This contract specifies the procurement of 3,776 machine screws identified by NSN 5305-00-054-5636 and part number MS51957-2, manufactured to the current revision of MIL-STD or industry consensus standards, with all items produced after the solicitation date required to meet the latest version of the governing specification. The items are classified as commercial and subject to tailored quality requirements including inspection and acceptance at origin, with zero non-conformances mandated in sampling under MIL-STD-1916 or equivalent zero-based plans. Critical attributes are verified at the highest level, and unspecified features are treated as major. The screws must not contain or come in direct contact with mercury or mercury compounds except under specific exemptions for functional components like batteries or sensors, and portable devices containing mercury must have shock-proof design and secondary containment as per NAVSEA 5100-003D. All packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with preservation methods including drying and protective materials, and marking adhering strictly to MIL-STD-129 without special codes. Mercury is prohibited in preservation and packing materials. Items are to be delivered FOB origin in 146 days to Warner Robins AFB, Georgia, with no tolerance for quantity variance. The supplier must ensure physical identification is applied per MIL-STD-130N, and all hardware must be traceable with manufacturer logos, lot numbers, and material markings. Transportation and shipping instructions reference DLA procedural notes, and all contractual requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

PIN, QUICK RELEASE

Solicitation # SPE4A6-26-T-11RF

This contract pertains to the procurement of a quick-release pin identified by NSN 5315-00-575-5740, with a required quantity of 184 units to be delivered FOB origin within 171 days, with no variance allowed in quantity. All items must conform strictly to the current revision of the part standard SPE4A6-26-T-11RF Section B, and previous revisions are only acceptable for hardware manufactured prior to the solicitation date. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling procedures adhering to MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The item is classified as a critical application and must undergo inspection and acceptance at the manufacturer’s origin. Mercury and mercury-containing compounds are prohibited unless essential for functional components such as batteries, fluorescent lamps, sensors, or weapon systems, and where used, portable devices must include a secondary containment barrier per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. Palletization follows DLA packaging standards, and delivery is directed to DLA Distribution San Joaquin in Tracy, California. The contract enforces full compliance with defined standards, prohibits intentional contamination with hazardous substances, and mandates original delivery by January 31, 2027, despite the original required date of December 17, 2026.

Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

INSULATION SLEEVING SE

Solicitation # SPE4A6-26-T-11ZR

The contract specifies the procurement of an Electrical Insulation Sleving Set with part number LNCL-12-140-CK-N and NSN 5970015164430, quantity of 60 kit units, under solicitation SPE4A6-26-T-11ZR. The item is subject to stringent technical and quality requirements mandated by the DLA Master List of Technical and Quality Requirements, including mandatory Item Unique Identification (IUID) in compliance with MIL-STD-130, and must be packaged and marked per MIL-STD-2073-1E and MIL-STD-129 with special shelf life marking code 32. The item is classified as a Critical Application Item with a non-extendable shelf life of 60 months, requiring strict adherence to preservation and packaging standards. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the item or its packaging, except for functional uses in batteries, lamps, or instruments as specifically authorized by NAVSEA. Sampling must follow MIL-STD-1916 or a comparable zero-based plan, with zero non-conformances required unless otherwise stated. The item must be procured in lengths divisible by 10 feet and delivered FOB origin within 171 days to the DLA Distribution facility in New Cumberland, PA, with a delivery deadline of January 31, 2027, despite the original required date being May 5, 2028. No quantity variance is permitted, and inspection and acceptance occur at destination, with all documentation and compliance governed by DFARS and DLA procedural notes.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

PRODUCTION LOT TESTING

Solicitation # SPE4A6-26-T-12FD

The contract pertains to the procurement of seven radio frequency cable assemblies with the NSN 0001S00000061, issued under solicitation SPE4A6-26-T-12FD with a response deadline of August 12, 2026, and a delivery requirement 261 days after award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the size of the acquisition. Packaging, identification, and removal of government markings from non-accepted items must comply with specific DLA directives, including RQ011 and RP001. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Physical identification of the item must conform to RQ017, and source approval documentation must adhere to RC001. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons and requiring compliance with DFARS 252.225-7048; access is limited to contractors with approved US/Canada Joint Certification Program certification, completed DLA training, and formal authorization. The place of performance is Greensboro, North Carolina, and primary point of contact is Traci Beaudoin at DLA.

Other Electronic Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

SCREW, CAP, SOCKET HEAD

Solicitation # SPE4A6-26-T-11TF

The contract is for 158 units of socket head cap screws with NSN 5305-01-032-9232, issued under solicitation SPE4A6-26-T-11TF by the Department of Defense’s ASC Commodities Division. The unit of issue is each (EA), with a fixed unit price and total price based on the documented quantity; no variance is permitted in the delivered quantity. Delivery is required within 217 days of award, with FOB origin terms meaning the contractor assumes responsibility for shipment from the point of origin. Inspection and acceptance both occur at the destination warehouse located at 25600 S Chrisman Road, Tracy, CA 95304-5000. Packaging must comply with MIL-STD-2073-1E, including preservation method 10, dry climate conditions, and no mercury or mercury compounds permitted in any packaging materials. Marking must adhere to MIL-STD-129 with no special marking required, and palletization must follow DLA’s RP001 packaging standards. The parcel post and freight shipping addresses are identical, directing delivery to Recipient Warehouse 57. The original required delivery date is April 7, 2027, with a need ship date of March 18, 2027. Transportation instructions reference DLA procedural notes C19 and C20. The contract was posted on August 4, 2026, with responses due by August 12, 2026, and is classified under NAICS 332722 for machinery manufacturing. Primary point of contact is Lisa Harvie, reachable via phone or email provided.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

RING, RETAINING

Solicitation # SPE4A6-26-T-11PN

The contract is for the procurement of 820 retaining rings identified by NSN 5325-00-187-9033 under solicitation SPE4A6-26-T-11PN, classified as a commercial item and procured through a fully competitive process. The item must comply with the current revision of its defining military or consensus non-government part standard, with prior versions accepted only for hardware manufactured before the solicitation date. Quality assurance requirements are governed by MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Sampling must result in zero non-conformances unless otherwise allowed by the contract, and manufacturers may choose between attribute or variable inspection methods under MIL-STD-1916. The item is subject to DLA’s master list of technical and quality requirements, with revisions controlled by the solicitation issue date for simplified acquisitions. Identification marking must adhere to MIL-STD-130N dated 16 November 2012, and government identification must be removed from non-accepted supplies. Delivery is due within 171 days of award, with performance at Hill AFB, Utah, and the primary point of contact is Carl Younce at DLA.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

BEARING, PLAIN, SPHER

Solicitation # SPE4A6-26-T-12LE

This contract specifies the procurement of 14 spherical plain bearings under NSN 3120-01-576-6374 and part number 5136L017-1 from Circor Aerospace, Inc. DBA 50601, with delivery required within 264 days FOB origin. The item is classified as a critical application component and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including tailored higher-level quality standards applicable to both manufacturers and non-manufacturers. Packaging, preservation, and marking must conform to MIL-STD-2073-1E, MIL-DTL-197M, and MIL-STD-129, with specific preservation methods determined by bearing type and closure, as outlined in referenced tables and paragraphs. Protective lubricants and preservation controls are dictated by bearing specifications, and the contractor’s packaging facility must meet quality assurance verification criteria. Unit of issue is each, with zero tolerance for quantity variance, and inspection and acceptance occur at destination. Item Unique Identification is not required per customer request, and all marking must follow specified standards without special codes. The solicitation number is SPE4A6-26-T-12LE, issued by the ASC Commodities Division of the Department of Defense, with a response deadline of August 12, 2026, and performance location at Hill AFB, Utah.

Ball and Roller Bearing Manufacturing

POSTED

about 4 hours ago

DEADLINE