Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

First Article Testing (FAT) and Qualification Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the execution and documentation of First Article Testing for cable assemblies to verify that the design and manufacturing processes meet all specified requirements using the DI-NDTI-80809B reporting format. This testing is a critical step in validating initial production samples to ensure conformance to technical standards before full-scale manufacturing proceeds. The work is performed under a subcontract tied to the Defense Logistics Agency within the Department of Defense, falling under NAICS code 541380 for other scientific and technical consulting services. All testing activities must be thoroughly documented to support qualification and compliance, with results formally submitted in the prescribed reporting format to meet military and logistical standards. The contract was posted in July 2026 and is associated with award number SPE4A626PV986, indicating its placement within the broader defense supply chain framework.

General Info

First Article Testing for cable assemblies per DI-NDTI-80809B for Defense Logistics Agency under contract SPE4A6626PV986.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-T-65S5.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CONTRACTOR FIRST ARTICLE TEST

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 21

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform and document First Article Testing for the cable assembly to validate design and process compliance using DI-NDTI-80809B reporting format.

Similar Contracts

Same NAICS industry code

Contractor First Article Testing (FAT) Services

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 8 hours ago

DEADLINE

in about 1 month

GOVERNMENT FIT VERIFIC

Solicitation # SPE7L3-26-Q-1328

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE7L3-26-Q-1328 for Government Fit Verific, identified by part number 0001S00000060. This federal procurement opportunity was posted on September 11, 2026, and requires a response by the deadline of September 28, 2026. The contract is managed under purchase request 7017604125, with specific quantity requirements detailed within the solicitation documents. Interested parties can access further details and submission guidelines through the DIBBS portal.

Defense Logistics Agency

POSTED

about 8 hours ago

DEADLINE

City of Red Deer - Request for Quotes - WTP - Laboratory Water Analysis

Solicitation # AB-2026-06241

The City of Red Deer is seeking quotations from qualified vendors to provide laboratory water analysis services for its Water Treatment Plant. This solicitation, identified by number AB-2026-06241, is aimed at securing professional analytical services to support the city's water treatment operations in Red Deer, Alberta. Interested respondents must submit their quotations by the deadline of October 2, 2026, at 10:00 PM. The procurement process is managed by Lindsey Flaman, the Procurement and Contract Specialist, who serves as the primary point of contact for this opportunity.

City of Red Deer

POSTED

about 9 hours ago

DEADLINE

Geotechnical Investigation & Lab Testing

Department of Environmental Protection

POSTED

about 10 hours ago

DEADLINE

Functional Characterization and Assay Laboratory Services

FDA Office Of Acq Grant Svcs

POSTED

about 13 hours ago

DEADLINE

First Article Testing and Production Lot Validation

LAND SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

Ballistic Coupon & First Article Testing Services

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 13 hours ago

DEADLINE

Ballistic and First Article Testing (FAT) Services

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 13 hours ago

DEADLINE

2026 RFO HAYSTACK WELL WATER ANALYSIS

Solicitation # 140L1726Q0065

Colorado State Office

POSTED

about 13 hours ago

DEADLINE

Hood Inspection and Certification for Laboratory Service

Solicitation # 36C24426Q0840

244-NETWORK Contract Office 4 (36C244)

POSTED

about 13 hours ago

DEADLINE

Aeration Blower and Silencer Vibration and Shock Fixture Fabrication

Solicitation # N6660426Q0459

Solicitation N66604-26-Q-0459 is a firm-fixed-price request for quotes from the Naval Undersea Warfare Center Division, Newport, for the fabrication and assembly of two specific test fixtures: one CHT Aeration Blower Fixture Assembly and one Discharge Silencer Fixture Assembly. The contractor is responsible for procuring materials, including copper-nickel piping, and performing welding and assembly to replicate a shipboard environment in accordance with Mil-DTL-901E and Mil-Std-167A. The work will be performed at the contractor's facility and at NUWCDIVNPT, where the contractor must provide on-site technical personnel to support government-executed fitment evaluations. Key deliverables include a Fabrication and Inspection Report due within five business days of assembly completion and a final Summary Report detailing fabrication and fitment testing. The desired delivery date for the assemblies is January 15, 2027, with delivery terms set as FOB Destination, Newport, RI. Award is based on the lowest price technically acceptable, with the government reviewing past performance via the Supplier Performance Risk System. Offerors must be registered in SAM, provide a CAGE code for drawing access, and achieve CMMC Level 2 (Self) certification prior to award. Quotes are due by September 11, 2026, and must include all shipping costs within the unit price.

Nuwc Division Newport

POSTED

about 13 hours ago

DEADLINE

Classified/Hazardous Location Electrical Inspection

City of Oceanside Water Utilities Department

POSTED

DEADLINE

in about 1 month

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2418

This contract, identified as SPE7L7-26-Q-2418, is a firm fixed price solicitation by the Defense Logistics Agency for the procurement of sealed lead acid storage batteries (NSN 6140-01-624-9682). The requirement consists of two line items totaling eight units, with delivery expected 60 days after the order. This is a restricted source item requiring government engineering source approval, and it is designated as a critical application item. The batteries have a non-extendable shelf life of 12 months and must comply with specific hazardous material communication and packaging standards, including MIL-STD-2073-1E and MIL-STD-129. Quality assurance will be managed via zero-based sampling plans according to MIL-STD-1916 or ASQ H1331. Shipments are destined for locations in Oregon and Hawaii, with strict prohibitions against the intentional addition of mercury except where functionally required.

Battery Manufacturing

POSTED

about 8 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2419

This contract is a solicitation for the procurement of five storage batteries, part number PS-12100 F1 from Power-Sonic Corporation, under NSN 6140-01-294-6528. The items are designated as critical application items and must feature F1 quick disconnect tabs. The contract is established as a firm fixed price agreement with a delivery requirement of 60 days after the order is placed. Each unit is destined for a specific naval vessel, including the USS Stout, USS Laboon, USS Barry, USS Russell, and USS John S McCain. The batteries are classified as Type I items with a non-extendable shelf life of 12 months. Strict adherence to hazardous materials packaging, marking, and shipping standards is required, specifically prohibiting the intentional addition of mercury except where functionally necessary. Quality assurance will be managed through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with inspection and acceptance occurring at the point of origin.

Battery Manufacturing

POSTED

about 8 hours ago

DEADLINE

BATTERY ASSEMBLY

Solicitation # SPE7L7-26-Q-2417

This solicitation from the Defense Logistics Agency under the Department of Defense is for the procurement of two battery assemblies, identified by NSN 6140-01-664-6369. The contract requires delivery within 60 days after receipt of the order. Strict compliance is required regarding cybersecurity and export controls. The provider must be a CMMC Level 2 Certified Third-Party Assessment Organization and adhere to regulations concerning Covered Defense Information. Additionally, the technical data is subject to ITAR and EAR export controls, meaning access is limited to contractors with an approved US/Canada Joint Certification Program certification and completed DLA export-control training.

Battery Manufacturing

POSTED

about 8 hours ago

DEADLINE

LIMITER, RADIO FREQU

Solicitation # SPE4A7-26-Q-1069

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE4A7-26-Q-1069 for the procurement of 49 radio frequency limiters. The items are identified by NSN/Part Number 1430-01-224-2273 and are associated with purchase request 7017409812. This federal solicitation was posted on September 11, 2026, with a response deadline of September 15, 2026. Interested parties should direct inquiries to the buyer via the DIBBS portal or the provided contact email.

Other Electronic Component Manufacturing

POSTED

about 8 hours ago

DEADLINE

COVERALLS, ANTI-EXPO

Solicitation # SPE1C1-26-Q-0498

The Defense Logistics Agency under the Department of Defense has issued solicitation SPE1C1-26-Q-0498 for the procurement of one unit of anti-exposure coveralls, identified by NSN/Part Number 8415-01-593-7934. This federal requirement is tracked under purchase request 7018286739. The solicitation was posted on September 11, 2026, with a response deadline of September 18, 2026. Interested parties should direct all inquiries to the buyer via the email address provided in the primary point of contact or through the DIBBS portal using the specific solicitation number.

Cut and Sew Apparel Manufacturing (except Contractors)

POSTED

about 8 hours ago

DEADLINE

POWER SUPPLY, UNINTERRU

Solicitation # SPE7L7-26-Q-2372

POSTED

about 8 hours ago

DEADLINE

61--BATTERY,STORAGE

Solicitation # SPE7L7-26-T-5218

This contract, solicitation number SPE7L7-26-T-5218, is issued by the Defense Logistics Agency for the procurement of three storage batteries, specifically East Penn Manufacturing Co. part number 18-G75-21EE. The acquisition is designated as a total small business set-aside under NAICS code 335910. The items are classified as critical application items with a non-extendable shelf life of 12 months. Delivery is required within 20 days after receipt of order, with the destination and inspection point set as the NAVSUP FLC Material Process Center in Japan. The contract mandates strict adherence to technical and quality requirements, including MIL-STD-1916 or ASQ H1331 for sampling and MIL-STD-129 for marking. Specific packaging and shipping protocols for hazardous materials are required per IP025 and RP001. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds, except for functional mercury used in batteries as specified by NAVSEA. All packaging must comply with MIL-STD-2073-1E, and the items must be delivered FOB destination.

Battery Manufacturing

POSTED

about 13 hours ago

DEADLINE

46--MODIFICATION KIT,WATER

Solicitation # SPE8E8-26-T-5568

Solicitation SPE8E8-26-T-5568 is a Request for Quotations issued by the Defense Logistics Agency Troop Support, Construction and Equipment office, for the procurement of two water treatment equipment modification kits under NSN 4610017148561. The requirement specifically references HDT Expeditionary Systems Inc part number T00012-5083-2. This is a total small business set-aside under NAICS 333310, with a response deadline of September 21, 2026. Delivery is required within 20 days after receipt of order, with the destination for inspection and acceptance located at Camp Pendleton, California. The procurement requires electronic submission of quotes via the DIBBS system. Contractors must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, and follow DLA packaging requirements RP001. Invoicing and payment must be processed through the Wide Area WorkFlow system. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and DFARS cybersecurity requirements for safeguarding covered defense information. Notably, the use of additive manufacturing for the supplied parts is prohibited unless specifically authorized.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 13 hours ago

DEADLINE

61--BATTERY,STORAGE

Solicitation # SPE7L7-26-Q-2412

The Defense Logistics Agency, through DLA Land and Maritime, has issued Request for Quotations SPE7L7-26-Q-2412 for the procurement of 100 nickel-cadmium wet storage batteries (NSN 6140-01-241-2296). These batteries are specified as wet, discharged, and spillable, with a non-extendable shelf life of 36 months. Approved sources include Aerodesign, Inc. (P/N AD-31004-04C) and Marathonnorco Aerospace, Inc. (P/N 31004-04C). The items are to be delivered to the Royal Saudi Air Force within 60 days after the order date. This is a fixed-price solicitation where award will be based on the best value to the government, evaluating technical conformity, past performance, and offered delivery time. Because the batteries are classified as corrosive materials (UN2795), the contractor must strictly adhere to hazardous materials regulations, including ICAO, IMDG, 49 CFR, and AFJMAN 24-204. Packaging must comply with MIL-STD-2073-1E Level B, Pack Code Q, using 4G fiber-board boxes. Inspection will be conducted by DCMA at the distributor or OEM site, with acceptance occurring at the origin. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and receiving reports. The contract incorporates various FAR and DFARS clauses, including the Buy American and Balance of Payments Program and strict cybersecurity reporting requirements under DFARS 252.204-7012. Quotes must be submitted electronically by the deadline of September 17, 2026.

Battery Manufacturing

POSTED

about 13 hours ago

DEADLINE

53--ANODE,CORROSION PREVEN

Solicitation # SPE4A6-26-Q-1423

The Defense Logistics Agency is soliciting quotes for the procurement of six corrosion prevention anodes under National Stock Number 5342013978773. This requirement is identified by solicitation number SPE4A6-26-Q-1423 and is designated as a total small business set-aside under NAICS code 332994. The approved source for this item is 6RDX4 W3T106427. Items must be delivered to DLA Distribution San Joaquin within 190 days after the order is placed. Interested responsible sources must submit their electronic quotes by the deadline of September 21, 2026. The solicitation is available exclusively online via the DIBBS portal, as no hard copies or separate technical drawings are provided.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 13 hours ago

DEADLINE

Supply of Fluid Pressure Regulating Valves (NSN 4820014623023)

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS