Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

First Article Testing (FAT) Coordination and Sample Delivery

Active

Federal

Response Deadline08/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the fabrication and delivery of five test units of a threaded insert specifically for First Article Testing conducted by the Fleet Readiness Center Southeast in Jacksonville, Florida. The work must be completed within 90 days of contract award, with all units destined for government evaluation to verify compliance with technical specifications. The procurement falls under the NAICS code 332710, classifying it as a subcontract for manufacturing fabricated metal products, and is administered by the ASC Commodities Division under the Department of Defense. Performance is localized to the Jacksonville area with a ZIP code of 32212-0103, and the solicitation was posted on August 9, 2026, with a response deadline of August 17, 2026, indicating a narrow window for proposal submission and qualification.

General Info

Fabricate and deliver five threaded inserts for First Article Testing in Jacksonville within 90 days.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332710 - Machine ShopsView NAICS

Place of Performance

JACKSONVILLE, FL, 32212-0103, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 9

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Fabricate and deliver 5 test units of threaded insert for government-conducted First Article Testing at Fleet Readiness Center Southeast, Jacksonville, FL, within 90 days of award.

Similar Contracts

Same NAICS industry code

Precision Machining of Brake Shaft AssembliesThe contract calls for the manufacture of 40 precision-engineered brake shaft assemblies adhering to military specifications and stringent quality standards, ensuring reliability and performance in defense applications. The work is classified under NAICS code 332710, indicating it falls within the precision machining and metal fabrication sector, and is structured as a subcontract under the Department of Defense. Performance is required at Hill Air Force Base, Utah, with the zip code 84056-5734 designated as the official place of performance. The solicitation was posted on August 9, 2026, and responses must be submitted by August 20, 2026, leaving a narrow window for qualified vendors to prepare and submit proposals. The contracting activity is managed through the Defense Logistics Agency's DIBBS platform, and bidders are expected to fully comply with all technical, quality, and delivery requirements outlined in the solicitation to meet the operational needs of the military.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 15 hours ago

DEADLINE

Precision Machining of Clamped Block ComponentsThe contract calls for the manufacture of 854 precision-machined clamped block units, encompassing the full production lifecycle from material sourcing and CNC machining to final finishing and packaging. All components must meet stringent quality and dimensional standards, with final packaging required to comply with MIL-STD-129 regulations to ensure proper identification, handling, and logistics readiness for military use. The work is designated as a subcontract under NAICS code 332710, indicating its classification within precision metalworking and machining services, and is managed by the Department of Defense through its LAND SUPPLY CHAIN organization. The place of performance is specified as Robins Air Force Base, Georgia, with the delivery location tied to this military installation. The solicitation was posted on August 9, 2026, with a firm response deadline of August 20, 2026, narrowing the window for potential vendors to submit proposals. Although the solicitation number and point of contact are not provided within the metadata, the official interface for submission and additional details is accessible via the DIBBS portal. There is no specified set-aside classification, meaning the contract is open to all eligible subcontractors without preference for small businesses or other categories. The project requires strict adherence to military procurement protocols, with an emphasis on traceability, compliance, and timely delivery to support operational readiness at the designated Air Force base.

LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

Precision Machining of Headless Pins

ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

Small Business Participation in SubcontractingCummins is seeking small business partners to participate in subcontracting opportunities across manufacturing, logistics, and technical services under its formal small business participation plan. These opportunities are aligned with NAICS code 332710, which pertains to industrial machinery and equipment manufacturing, and are intended to support Cummins’ broader supply chain goals within the defense sector. The contract is being facilitated through the Defense Logistics Agency, a component of the Department of Defense, with performance expected to occur across various locations without a specified primary city or state. The solicitation was posted on August 9, 2026, and while no set-aside designation is provided, the initiative is structured to encourage meaningful engagement from small businesses. Interested parties can access further details through the provided DIBBS portal link, which links to the award record for contract SPE7LX21D0007 and delivery order SPE7L126FACL8.

Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

Precision Machining ServicesThe contract encompasses precision CNC machining services for the production of high-tolerance metal components used in military fluid assemblies, specifically involving turning, milling, and finishing operations to meet strict defense standards. The work is classified under NAICS code 332710 and is structured as a subcontract under the Department of Defense, with the Defense Logistics Agency as the overseeing organization. All components must adhere to exacting dimensional and material specifications to ensure reliability and performance in critical military applications. The contract was posted on August 9, 2026, and performance is expected to be executed in alignment with federal defense procurement requirements, though specific location details for the place of performance are not provided. The award is identified through DIBBS with the contract number SPE7LX21D0007 and delivery order SPE7L126FACL8, indicating its integration into an existing procurement framework managed by the Defense Supply Center Philadelphia.

Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

Precision Fastener Manufacturing / SupplyThe contract requires the manufacture or supply of a straight-headed pin identified by NSN 5315013888569, adhering strictly to military specifications that govern material composition, dimensional tolerances, and performance standards. All items must be properly marked with required identification data and packaged in a manner that ensures integrity during transit and storage, with full traceability maintained throughout the supply chain to support military logistics and quality assurance protocols. The product is intended for use in defense applications where reliability and consistency are critical. This is a subcontract opportunity issued by the ASC Commodities Division under the Department of Defense, with a place of performance designated as Texarkana, Texas, 75507-5000. The solicitation was posted on August 9, 2026, and responses are due by August 17, 2026. The NAICS code 332710 corresponds to screw, nut, and bolt manufacturing, indicating the technical scope aligns with precision fastener production. There is no set-aside designation, and the contracting office has not specified a point of contact, requiring potential respondents to engage directly through the provided DIBBS portal link.

ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

Precision Machined Component Manufacturing

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

Precision Manufacturing of Seal Assembly ComponentsThe contract requires the manufacture of 58 units of a critical defense seal assembly identified by part number 03211257 and NSN 1650-00-589-1257, with all components subject to strict adherence to military specifications for form, fit, and function. The work is classified as a subcontract under NAICS code 332710 and is being managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. Performance of the contract is designated for San Diego, California, with the zip code 92136-3581. The solicitation was posted on August 9, 2026, and responses must be submitted by August 17, 2026, with no set-aside designation applied. The contract is accessible via the DIBBS portal under the reference number SPE4A726T632K, indicating it is part of a defense supply chain procurement process requiring precise, qualified manufacturing capability.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

Precision Machining of Orifice Tip FittingThe contract calls for the manufacture of eight precision orifice tip fittings identified by NSN 1650-00-604-6318, requiring advanced CNC machining to meet stringent dimensional tolerances and material specifications using specialized alloys. Strict quality control and full metallurgical traceability are mandated to ensure compliance with defense-grade standards, with each component needing to be documented through all stages of fabrication. The work must be performed at the designated place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002, under the oversight of the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. The solicitation is classified as a subcontract and was posted on August 9, 2026, with a firm response deadline of August 17, 2026. It falls under the NAICS code 332710, indicating it pertains to machine shop services involving precision manufacturing. There is no set-aside designation, and the point of contact details are not provided. All proposals must align with the technical and compliance requirements specified in the RFQ, accessible through the DIBBS portal at the provided UI link. The focus is on producing flight-critical hardware with zero deviation from approved specifications and complete documentation for supply chain integrity.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

Precision Machined Coupling Half (Quick-Disconnect)The contract calls for the manufacture of 262 precision-machined valved quick-disconnect coupling halves designated by NSN 4730-01-316-0125, specifically tailored to meet military specifications for use in fluid handling systems. These components are critical for reliable and safe fluid transfer in defense applications, requiring exacting tolerances and robust materials to ensure performance under demanding operational conditions. The work is classified under NAICS code 332710, indicating it falls within the forgings and stampings manufacturing sector, and is structured as a subcontract under the Department of Defense’s Fluid Handling Division. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, allowing potential vendors a limited window to submit proposals. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, suggesting that production, inspection, or delivery activities must occur in or near this location. Although no specific set-aside designation or point of contact is provided, the contract remains open to qualified subcontractors capable of fulfilling the technical and compliance requirements for defense-grade fluid system components. The official solicitation details can be accessed through the DIBBS portal at the provided UI link.

FLUID HANDLING DIVISION

POSTED

about 15 hours ago

DEADLINE

Precision Manufacturing of Helical Torsion SpringsThe contract calls for the manufacture of 1,520 helical torsion springs in strict compliance with military technical drawing NR 19207 7521423, which dictates exact material specifications, dimensional tolerances, and performance criteria. All units must meet rigorous production standards for functional reliability and durability under operational conditions, with comprehensive testing required to verify compliance. The work is subcontracted under the NAICS code 332710, indicating a focus on forging and stamping operations, and performance must occur in Greensboro, North Carolina, with the zip code 27409 serving as the designated place of performance. Issued by the Department of Defense under the LAND SUPPLY CHAIN agency, the solicitation was posted on August 9, 2026, with responses due by August 20, 2026. The contract is part of a broader defense supply chain initiative and requires adherence to federal procurement guidelines without set-aside designations. All submissions must align with the technical requirements outlined in the referenced military drawing and be delivered to the specified location to fulfill contractual obligations.

LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

Precision Machining of Firearm ComponentsThe contract requires precision CNC machining, finishing, and inspection of Shield Assembly and Pro components in strict compliance with military specifications and detailed technical drawings, with oversight by the Defense Contract Management Agency to ensure adherence to quality and regulatory standards. All work must be performed at the designated place of performance in New Cumberland, Pennsylvania, with zip code 17070-5002, and is subject to rigorous quality control protocols defined by defense requirements. This is a total small business set-aside under NAICS code 332710, reserved exclusively for small businesses as defined by the Small Business Administration, and is classified as a subcontract within the Department of Defense’s Land Supply Chain. The solicitation was posted on August 9, 2026, with a response deadline of August 20, 2026, and all submissions must be made through the DIBBS platform using the provided link. Contractors must demonstrate proven capability in defense-grade machining and inspection processes to qualify for award.

LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Domestic and Export-Controlled Materials ComplianceThis contract requires strict adherence to DFARS regulations governing the use of prohibited materials, specifically mandating compliance around hexavalent chromium, radioactive content reporting, and the exclusion of banned telecommunications equipment. All subcontracted deliverables must be evaluated and documented to ensure no restricted substances are present and that supply chain integrity is maintained in alignment with federal defense standards. The contract applies to materials used both domestically and in export contexts, with full transparency required for sourcing and composition verification. The opportunity is listed as a subcontract under NAICS code 541690, issued by the ASC Commodities Division under the Department of Defense, with performance tied to Tracy, California, ZIP 95304-5000. Interested parties must respond by August 17, 2026, and are directed to the official DIBBS portal for full solicitation details. While no specific set-aside status is indicated, compliance with defense-specific material restrictions and reporting obligations is non-negotiable and critical for award consideration.

Other Scientific and Technical Consulting Services

POSTED

about 15 hours ago

DEADLINE

Cybersecurity Compliance (NIST SP 800-171)The contract requires the implementation and documentation of NIST SP 800-171 cybersecurity controls to safeguard Covered Defense Information within contractor systems that handle classified or sensitive contract data. This effort is mandatory for ensuring compliance with federal cybersecurity standards applicable to defense contractors and involves a full assessment and record-keeping of all required security controls across systems processing protected information. The work must be completed in alignment with the NIST framework and demonstrated through formal documentation to meet contractual obligations. The contract is classified as a subcontract under the NAICS code 541512, associated with computer systems design services, and is issued by the ASC Commodities Division of the Department of Defense with performance required in Tracy, California, 95304-5000. The solicitation was posted on August 9, 2026, with a response deadline of August 17, 2026, indicating a tight turnaround for submission. Although no set-aside type is specified, the contract is governed by DoD cybersecurity regulations and demands strict adherence to NIST guidelines to protect national defense information, making compliance non-negotiable for award consideration.

Computer Systems Design Services

POSTED

about 15 hours ago

DEADLINE

Hazardous Materials Compliance & SDS ManagementThe contract requires identification of all hazardous materials utilized in manufacturing or coating operations and the ongoing maintenance of Safety Data Sheets that comply with OSHA regulations as well as Department of Defense federal requirements. Responsibility includes ensuring accurate, up-to-date documentation for every chemical or substance involved in production processes, with strict adherence to federal standards for hazard communication and worker safety. All SDS must be systematically managed, accessible, and aligned with current regulatory frameworks to support compliance during inspections and operational audits. Performance is based in Tracy, California, with a response deadline of August 17, 2026, and the contract is classified as a subcontract under NAICS code 541620, which pertains to environmental consulting services. The procuring entity is the ASC Commodities Division within the Department of Defense, indicating the work supports defense-related manufacturing or supply chain activities. Full compliance with both OSHA and DoD mandates is non-negotiable, and the contractor must demonstrate proven capability in hazardous materials management, documentation accuracy, and regulatory vigilance to meet the obligations of this engagement.

Environmental Consulting Services

POSTED

about 15 hours ago

DEADLINE

Packaging, Palletization, and Labeling ServicesThe contract requires the provision of packaging, palletization, and labeling services for lock washers in accordance with MIL-STD-129 standards and DLA RP001 requirements, ensuring all units meet military specifications for identification, handling, and shipment. The work must be completed such that each item is properly labeled, packaged at the unit level, and palletized for efficient transport and inventory management, with the final delivery destination being Tracy, CA, and the zip code 95304-5000. All activities must align strictly with the defined military packaging protocols to guarantee compliance and seamless integration into the Defense Logistics Agency’s supply chain. The solicitation is classified as a subcontract under the NAICS code 493190, which pertains to other warehousing and storage, indicating the scope focuses on logistics and handling rather than manufacturing. The contract was posted on August 9, 2026, with a response deadline of August 17, 2026, and is managed by the ASC Commodities Division under the Department of Defense. While no specific point of contact or set-aside details are provided, performance is exclusively tied to the Tracy, CA location, and the winning party will be responsible for full adherence to all labeling, packaging, and palletization directives without deviation.

Other Warehousing and Storage

POSTED

about 15 hours ago

DEADLINE

Precision Lock Washer ManufacturingThe contract calls for the manufacture of precision lock washers in full compliance with military specifications, ensuring adherence to strict material composition, dimensional tolerances, and performance criteria. The product must meet all technical and quality standards required for military-grade applications and is destined for delivery to Tracy, CA, specifically to a facility with the ZIP code 95304-5000. The solicitation is structured as a subcontract under NAICS code 332722, which classifies the activity as forging and stamping operations, and is managed by the ASC Commodity Division under the Department of Defense. All responses must be submitted by August 17, 2026, with the solicitation posted on August 9, 2026, providing a window of eight days for interested parties to prepare and submit proposals. The place of performance is fixed at Tracy, CA, and full compliance with the military standards is mandatory for award consideration.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

Close-Tolerance Screw Manufacturing and SupplyThe contract requires the precision manufacturing, inspection, packaging, and delivery of 87 close-tolerance screws identified by NSN 5305-01-618-7124, all of which must adhere strictly to Department of Defense standards and military specifications. The work is to be performed in San Diego, California, with the final delivery expected to meet all quality and compliance requirements set by the Defense Logistics Agency. This subcontract is under the NAICS code 332722, indicating it pertains to screw, bolt, and nut manufacturing, and is part of the ASC Commodities Division's procurement activities. Responses must be submitted by August 17, 2026, with the solicitation posted on August 9, 2026. The contract is managed through the DIBBS platform, and all technical, dimensional, and material requirements must align with existing military guidelines to ensure interoperability and reliability in operational environments. The supplier is expected to provide full traceability, documentation, and certification for each screw, including inspection reports and packaging compliance to prevent damage during transit and storage. Deliverables must be ready for immediate acceptance and integration into military logistics systems.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

Packaging and Marking Compliance ServicesThe contract requires compliance with MIL-STD-2073-1E and DLA RP001 for the packaging and marking of fasteners, encompassing all aspects of labeling, palletization, and hazardous materials documentation to ensure full adherence to military standards. All work must be performed at Robins AFB, Georgia, with strict attention to the specified technical requirements to meet Department of Defense supply chain protocols. The solicitation is restricted to HUBZone-certified small businesses under a HUBZone Set-Aside designation, and the NAICS code 493190 indicates the focus on warehousing and storage services. Offers must be submitted by the deadline of August 17, 2026, with the procurement managed by the ASC Commodities Division under the Department of Defense.

Other Warehousing and Storage

POSTED

about 15 hours ago

DEADLINE

First Article Testing and Engineering Compliance ServicesThe contract requires the performance of First Article Testing on three units designated as Lot/Item 5306/1218846, with all testing activities strictly aligned to AS9102 standards and applicable engineering change controls. The deliverable is a formal test report that documents compliance with technical specifications and ensures that the first production units meet all required quality and performance criteria. This engagement is classified as a subcontract under a HUBZone Set-Aside, intended to support small businesses located in historically underutilized business zones. The work is to be performed at Robins Air Force Base, Georgia, with a zip code of 31098-1887, and falls under the NAICS code 541330 for engineering services. The solicitation was posted on August 9, 2026, with responses due by August 17, 2026, and is managed by the ASC Commodities Division of the Department of Defense. All testing procedures must adhere to rigorous aerospace quality standards, and the contractor must demonstrate full compliance with technical documentation and change management protocols throughout the process.

Engineering Services

POSTED

about 15 hours ago

DEADLINE

Self-Retaining Bolt SupplyThe contract calls for the supply of 330 self-retaining bolts identified by NSN 5306001218846, with all packaging required to meet Defense Logistics Agency compliance standards and delivery coordinated to Robins Air Force Base at the specified zip code. Terms are FOB Origin, meaning the buyer assumes responsibility for the goods once they leave the seller’s location. This subcontract is designated as a HUBZone Set-Aside, reserved for businesses certified in Historically Underutilized Business Zones, under NAICS code 332722 which classifies the work as forging and stamping. The solicitation was posted on August 9, 2026, with responses due by August 17, 2026, and is managed by the ASC Commodities Division of the Department of Defense under its official procurement portal.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

Precision Fastener Supply (Close Tolerance Bolts)The contract requires the supply of 5,500 close tolerance bolts with the National Stock Number 5306001218846, all of which must comply with military specifications for quality, dimensions, and performance. The vendor is responsible for proper packaging and labeling in accordance with government standards to ensure traceability and handling integrity during transit. Delivery is mandated to Robins Air Force Base, specifically at the ZIP code 31098-1887, with all obligations tied to the contract’s performance requirements and timelines. The solicitation is structured as a subcontract under a HUBZone Set-Aside designation, meaning only qualified small businesses located in historically underutilized business zones are eligible to compete, promoting economic development in targeted areas. The North American Industry Classification System code 332722 identifies the category as machine shops and precision turning centers, indicating the specialized manufacturing capability needed to meet the tight tolerances required. The opportunity was posted on August 9, 2026, and responses are due by August 17, 2026, managed by the ASC Commodities Division under the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

Electronic Invoice and Payment Processing (WAWF Support)The contract requires the submission of electronic invoices and receiving reports through the Wide Area WorkFlow (WAWF) system in full alignment with Department of Defense payment protocols. All documentation must be processed electronically via WAWF to ensure timely and accurate payment, adhering strictly to DoD standards for invoice verification and receipt acknowledgment. The work is to be performed in support of the ASC Commodities Division, with the primary place of performance located at Hill AFB, Utah, 84056-5734, and is classified as a subcontract under NAICS code 541512 for custom computer programming services. The solicitation was posted on August 9, 2026, and responses are due by August 17, 2026, with no set-aside designation specified. Participation requires full technical capability to interface with WAWF and maintain compliance with all federal government electronic transaction requirements.

Computer Systems Design Services

POSTED

about 15 hours ago

DEADLINE

Domestic Content and Regulatory Compliance SupportThe contract requires comprehensive documentation and verification services to ensure full compliance with the Buy American Act, the Berry Amendment, and U.S.-flag vessel shipping regulations, all critical for maintaining domestic sourcing and transportation standards in defense-related procurement. Services must confirm that all materials, components, and finished goods meet the stringent domestic content thresholds and manufacturing requirements mandated by these statutes, with rigorous audit trails and supporting evidence provided to demonstrate adherence. Performance is centered at Hill Air Force Base, Utah, with a focus on delivering verifiable records and certifications to the Department of Defense’s Commodity Division. The solicitation is structured as a subcontract with a NAICS code of 541611, indicating that the work involves management, scientific, and technical consulting services dedicated to regulatory compliance. Proposals must be submitted by August 17, 2026, and interested parties are directed to the DIBBS portal for formal submission details. The effort underscores the federal government’s emphasis on enforcing Made in America policies within its supply chain.

Administrative Management and General Management Consulting Services

POSTED

about 15 hours ago

DEADLINE