Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

First Article Testing (FAT) for Gearbox Brackets

Open

Federal

Response Deadline11/13/2026, 11:00:00 AM CST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves performing first article testing and validation for gearbox brackets under the DLA Weapons Support ASC Commodities Division. The selected contractor is responsible for producing three test units of NSN 2840-00-798-2656, which will undergo government validation at Tinker AFB. The final deliverables include the three test units and all associated validation reports required for official government approval. To be eligible for this project, contractors must hold CMMC Level 2 and JCP certifications. The work falls under NAICS code 336412 and is managed by the Department of Defense. Interested parties must adhere to the response deadline of November 13, 2026.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

336412 - Aircraft Engine and Engine Parts Manufacturing

Place of Performance

TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-9266.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BRACKET ASSEMBLY, GEARB

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 5

subcontract

Response DeadlineNov 13

Submission deadline

Response Deadline

11/13/2026, 11:00:00 AM CSTin 7 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs first article testing and validation for prime contractors on DLA Weapons Support ASC projects. Produces 3 test units of NSN 2840-00-798-2656 for government validation at Tinker AFB. Requires CMMC Level 2 and JCP certification. Delivers 3 test units and associated validation reports for government approval.

Similar Contracts

Same NAICS industry code

Manufacture and Supply of Airflow BafflesThis subcontract involves the manufacture and supply of 59 airflow baffles for non-aircraft reciprocating engines to support the DLA Weapons Support Land Supplier Opns Engines. The contractor is responsible for fabricating the units in accordance with NSN 2805015876836 and the DLA Master List of Technical and Quality Requirements, with packaging adhering to ASTM D3951 and MIL-STD-129 standards. The project requires strict compliance with the Buy American Act and DFARS cybersecurity clauses. All 59 packaged baffles are to be delivered FOB Origin, with the place of performance located in Texarkana, Texas. The solicitation was posted on November 5, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

about 13 hours ago

DEADLINE

Supply of Cover, Lower Rotor Support (NSN 2915-01-057519-0)

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 13 hours ago

DEADLINE

Turbine Engine Gearbox Bracket Assembly FabricationThis subcontract involves the fabrication of 12 turbine engine gearbox bracket assemblies for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The work must be performed according to TDP Rev B Gen 2 and reference drawings 77445 series, while strictly adhering to the QAP 77445 MQR-PSD-1 Rev 2 quality standards. All finished assemblies are required to be marked in accordance with RQ017. To be eligible for this project, the contractor must maintain ISO 9001:2015, CMMC Level 2, and JCP certifications to handle export-controlled data. The place of performance is designated as Tinker AFB. This requirement falls under NAICS code 336412 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

Mechanical Drive Housing FabricationThis subcontract involves the fabrication of three Mechanical Drive Housings for the DLA Weapons Support Fluid Handling Division, to be performed at Tinker AFB. The manufacturer is required to utilize high-precision CNC machining to produce the units in strict accordance with Reference Drawing NR 82918 5-57246 and TDP Rev A Gen 1. To ensure quality and security standards, the contractor must maintain compliance with SAE AS9003 or ISO 9001 certifications and meet CMMC Level 2 requirements. The final deliverable consists of three completed housings submitted for Government First Article Testing.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 13 hours ago

DEADLINE

Engine Poppet Valve Rocker Arm ManufacturerThis subcontract involves the manufacture and supply of four precision-machined engine poppet valve rocker arms for the DLA Weapons Support Land Supply Chain. The contractor is responsible for fabricating the components according to NSN 2815000806261 and DLA Master List RA001 quality requirements, utilizing precision machining to achieve aerospace tolerances. All materials used must comply with the Buy American Act, and the provider must maintain NIST SP 800-171 cybersecurity compliance. The opportunity falls under NAICS code 336412 and was posted on November 5, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

Manufacture of Crank Assembly, Gate FuelThis subcontract involves the precision machining, fabrication, and final assembly of the Gate Fuel Crank Assembly, identified by NSN 2915-00510-8297, for prime contractors supporting the DLA Weapons Support ASC. The scope of work requires machining components to specific TDP tolerances and integrating them into two completed, inspected assemblies. Technical requirements include the use of CNC machining and MET calibration in accordance with RT001. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Division, with performance taking place at Tinker AFB. To be eligible, contractors must hold CMMC Level 2 certification. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026, falling under NAICS code 336412.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

Supply of Pump Overhaul Parts Kits (NSN 2915-00-922-8990)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

Cooling Turbine Parts Kit Fabrication and Assembly

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

Precision Aerospace Tube Assembly ManufacturingThis subcontract involves the manufacture of seven certified flight-critical engine tube assemblies for the DLA Weapons Support Fluid Handling Division. The fabrication must strictly adhere to RTX Corporation part number 733088 and utilize zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. Performance will take place at Tinker AFB under NAICS code 336412. To be eligible, the contractor must maintain SAE AS9100 certification and provide a CMMC Level 2 self-assessment. Additive manufacturing is strictly prohibited unless specific authorization is granted by the ESA. The response deadline for this requirement is November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 13 hours ago

DEADLINE

Fuel Metering Jet Manufacturing and SupplyThis subcontract involves the manufacturing and supply of fuel metering jets for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires precision machining of NSN 2915-00-897-4228 according to Honeywell P/N 2525107-64 specifications using CNC aerospace tooling. Quality control must be maintained through inspection systems compliant with MIL-STD-1916 or ASQ H1331, and the final delivery consists of five finished jets packaged in accordance with MIL-STD-2073-1E and MIL-STD-129. To be eligible, the provider must hold ISO 9001:2015 certification and have completed a CMMC Level 2 Self-Assessment. The project falls under NAICS code 336412 and is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division. Performance of the contract will take place in New Cumberland, Pennsylvania.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 13 hours ago

DEADLINE

Supply of Control Valves (NSN 1660014191581)This subcontract involves the supply of 11 Honeywell Control Valves, part number 136849-2, to support prime contractors on projects for the DLA Weapons Support ASC Commodities Division. The selected provider is responsible for manufacturing or sourcing these parts according to strict Honeywell specifications and delivering the final units to the DLA Distribution Depot Oklahoma at Tinker AFB. To ensure operational readiness and quality, the contractor must adhere to MIL-STD-1916 or ASQ H1331 for quality sampling and maintain zero-nonconformance standards per MIL-STD-105/ASQ Z1.4. Mandatory certifications include SAE AS9003 or ISO 9001, along with CMMC Level 2 compliance. The procurement falls under NAICS code 336412.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

Component Supply for Motor Overhaul Kit (NSN 1650-00-351-5706)This subcontract involves the supply of precision components for Motor Overhaul Kits under NSN 1650-00-351-5706 for the DLA Weapons Support Fluid Handling Division. The contractor is responsible for manufacturing or sourcing individual parts and sub-assemblies for kitting, strictly adhering to Technical Data Package Rev A Gen 1 and Eaton Aerospace LLC / Vickers Fluid Power P/N 914497. Performance will take place at Hill AFB. Strict quality and security standards are mandated, including a zero-based sampling plan that allows for no non-conformances. The provider must maintain ISO compliance and achieve CMMC Level 2 certification to ensure the secure handling of Controlled Unclassified Information. The response deadline for this opportunity is November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 13 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Supply of Critical Application Sleeve Bearings (P/N HS5445-1)This subcontract involves the procurement and delivery of four specialized sleeve bearings, part number HS5445-1, sourced from the Roller Bearing Company of America, Inc. These components are intended for prime contractors delivering to the Department of Defense under the DLA Weapons Support ASC Commodities Division. Due to the nature of the equipment, the items must adhere to Critical Application Item quality standards. The contract requires the submission of receiving reports through the Wide Area Workflow system. Performance for this requirement is centered in New Cumberland, Pennsylvania, under NAICS code 332510. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.

Hardware Manufacturing

POSTED

about 13 hours ago

DEADLINE

Supply of Hexagon Head Cap ScrewsThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves the supply of 250 Hexagon Head Cap Screws identified by NSN 5305015885151. The contract is designated under NAICS code 332722 and requires the supplier to provide industrial fasteners to prime contractors. Performance for this contract will take place in New Cumberland, Pennsylvania. The agreement mandates strict adherence to the Berry Amendment and the Buy American Act to ensure all materials meet domestic origin requirements. Shipping will be handled according to FOB Origin and First Destination Transportation terms. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 13 hours ago

DEADLINE

Bearing Half, Sleeve SupplyThis subcontract involves the manufacture or procurement of 107 Bearing Half, Sleeve units for prime contractors supporting DLA Weapons Support projects. The supplier is responsible for ensuring all components meet the technical specifications for NSN 3120001363016, with strict adherence to bare item marking per RQ017 and packaging standards according to DLA Packaging Requirements RP001. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, the work is associated with NAICS code 332999. The place of performance is located at Hill AFB, zip code 84056-5734. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 13 hours ago

DEADLINE

Plain Rod End Bearing Supplier (NSN 3120014551641)This subcontract involves the supply of five inspected plain rod end bearings for prime contractors supporting DLA Weapons Support ASC projects. The supplier is responsible for manufacturing or sourcing NSN 3120014551641, also known as GE part L31302G02, which is classified as a Configuration Control Item. All deliverables must adhere to strict military standards, including marking per MIL-STD-130N and packaging requirements according to MIL-DTL-197M and MIL-STD-2073-1E. To be eligible, the contractor must hold SAE AS9003 or ISO 9001 certification and ensure full compliance with the Buy American Act and the Berry Amendment. The performance of this contract is centered in San Diego, California, under NAICS code 332991. Responses to this opportunity are due by November 13, 2026.

Ball and Roller Bearing Manufacturing

POSTED

about 13 hours ago

DEADLINE

Third-Party Source Inspection and Quality CertificationThis subcontract for Third-Party Source Inspection and Quality Certification supports prime contractors on DLA Weapons Support ASC projects. The selected provider will perform source inspections and quality verification at manufacturer facilities, utilizing precision measurement tools to ensure strict compliance with MS35764H and MIL-DTL-45912C standards. Additionally, the contractor is responsible for validating SAE AS9003/ISO 9001 systems and ensuring packaging meets MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N requirements, culminating in the delivery of signed inspection reports and quality certifications. Managed by the Department of Defense under NAICS code 541380, the performance of this contract is centered in Tracy, California. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.

Testing Laboratories and Services

POSTED

about 13 hours ago

DEADLINE

Manufacturing of Critical Application Machine Bolts (MS35764-261)This subcontract involves the manufacture of 1,104 critical application machine bolts for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The parts must be fabricated according to MS35764H, MIL-DTL-45912C, and TDP Rev A Gen 1 specifications using precision machining, with a strict prohibition on additive manufacturing. Performance will take place in Tracy, California, under NAICS code 332722. The contractor must ensure full compliance with the Berry Amendment and maintain a quality system that adheres to either SAE AS9003 or ISO 9001 standards. Final deliverables must be packaged and labeled in accordance with MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N. The response deadline for this requirement is November 13, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 13 hours ago

DEADLINE

Supplier of Blind Rivets (NSN 5320-00-718-0835)This subcontract involves the procurement of 3,908 blind rivets to support prime contractors on projects for the DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing rivets that strictly adhere to Part Number CCR274SS-3-6 and NSN 5320-00-718-0835, ensuring compliance with the DLA Master List of Technical and Quality Requirements. Notably, the use of additive manufacturing is prohibited for this contract. All deliverables must be packaged according to ASTM D3951, RP001, and MIL-STD-129 standards. The final shipment of 3,908 units is to be delivered FOB Origin to Tinker AFB, Oklahoma. This requirement falls under NAICS code 332510 and is managed by the Department of Defense.

Hardware Manufacturing

POSTED

about 13 hours ago

DEADLINE

Manufacturer of Flat Washers (NSN 5310-00-178-0607)This subcontract involves the manufacture and delivery of 48 flat washers for prime contractors supporting DLA Weapons Support ASC projects. The parts must be produced according to NSN 5310-00-178-0607 technical data and adhere to either SAE AS9003 or ISO 9001 quality systems. All items must be packaged and marked in accordance with ASTM D3951, RP001, and MIL-STD-129 standards, with final delivery handled as FOB Origin to Robins Air Force Base. To be eligible, the contractor must maintain CMMC Level 2 certification and ensure full compliance with ITAR and EAR regulations. Additionally, access to the US/Canada Joint Certification Program is required. The opportunity is categorized under NAICS code 332722 and is managed by the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 13 hours ago

DEADLINE

Supply of Socket Head Cap Screws (NSN 5305-00-269-0783)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the manufacture or sourcing of 8,627 socket head cap screws. The components must strictly adhere to NSN 5305-00-269-0783 specifications, with marking and packaging requirements governed by MIL-STD-129 and MIL-STD-2073-1E respectively. All units are to be delivered to a designated destination point for final inspection and acceptance. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 334418, with the place of performance located in Albany. Interested parties must respond by November 13, 2026, to provide these essential supplies for prime contractors supporting DLA Weapons Support supply contracts.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 13 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing military-grade packaging and marking services for the Department of Defense under the DLA Weapons Support ASC Commodities Division. The scope of work requires the contractor to perform bare item markings according to RQ017, execute packaging and preservation in compliance with MIL-STD-2073-1E Method 33, and apply shipping labels per MIL-STD-129. These rigorous standards are necessary to ensure a 36-month shelf life for the materials. The specific deliverable consists of 21 individually marked and packaged grommets to be shipped to DLA Distribution Cherry Point. The project falls under NAICS code 488510, with a response deadline set for November 13, 2026.

Freight Transportation Arrangement

POSTED

about 13 hours ago

DEADLINE

Nonmetallic Grommet Manufacturer (Fuel Vent Line)This subcontract involves the manufacture of 21 nonmetallic grommets for fuel vent lines to support prime contractors on DLA Weapons Support ASC projects. The components must be fabricated according to basic drawing 78286 65307-03016 and NSN 5325-00-060-5294 using either precision molding or machining processes. Performance will take place in Cherry Point, and the final delivery must consist of 21 finished and inspected units. To qualify, the manufacturer must maintain a quality management system that complies with SAE AS9003 or ISO 9001 standards and strictly adhere to the Buy American program. The opportunity was posted on November 5, 2026, with a response deadline of November 13, 2026. This requirement falls under NAICS code 326199 and is managed by the Department of Defense.

All Other Plastics Product Manufacturing

POSTED

about 13 hours ago

DEADLINE

Defense Packaging and Shipping ServicesThis subcontract for Defense Packaging and Shipping Services involves providing specialized military-grade packaging for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work requires the packaging of 111 retaining rings in strict accordance with MIL-STD-129, RP001, and ASTM D3951 standards, utilizing approved MIL-SPEC materials and labeling equipment. The contractor is responsible for coordinating FOB Origin shipping to the DLA Distribution Depot Oklahoma located at Tinker AFB. This project falls under NAICS code 488510 and is managed by the Department of Defense.

Freight Transportation Arrangement

POSTED

about 13 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

CAP, FILLER OPENING

Solicitation # SPE4A7-27-T-3063

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

JET, METERING, FUEL C

Solicitation # SPE4A5-27-T-2416

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 13 hours ago

DEADLINE

VALVE AND PIN PILOT

Solicitation # SPE4A5-27-T-2419

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 13 hours ago

DEADLINE

COVER, LOWER ROTOR SUPP

Solicitation # SPE7M4-27-T-2560

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 13 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS