Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

First Article Testing (FAT) Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the contractor to perform and document a First Article Test for a sleeve bushing, encompassing detailed dimensional inspections, material verification, and comprehensive test reporting to ensure full compliance with specified requirements. This work is essential for validating that the initial production unit meets all design and quality standards before full-scale manufacturing proceeds. The contract falls under the NAICS code 541330 and is classified as a subcontract issued by the Defense Logistics Agency under the Department of Defense, with the performance location not explicitly defined. The solicitation was posted on July 17, 2026, and is accessible through the DIBBS system under contract number SPE4A626P8702. No set aside information or specific point of contact is provided, but the scope is focused strictly on the technical execution and documentation of the first article testing process.

General Info

Contractor must perform and document first article test for sleeve bushing per DoD specifications.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Conduct and document Contractor First Article Test for the sleeve bushing, including dimensional inspection, material verification, and test reporting.

Similar Contracts

Same NAICS industry code

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services under an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract to support major construction projects across various phases including planning, design, construction, and closeout. These services will encompass a range of delivery methods such as Design Build, Progressive Design Build, and other alternative project delivery formats, with the primary goal of ensuring projects adhere to authorized schedules, budgets, and quality standards. The contract is intended to streamline oversight and coordination for the Port’s extensive capital improvement initiatives, requiring technical expertise in managing complex infrastructure developments. Primary point of contact for this opportunity is Hala Rabbo, who can be reached via email or phone, with additional support available from Project Manager Ann Davidson. The solicitation is classified under NAICS code 541330, which designates architectural, engineering, and related services. Although the contract is currently posted as a forecast with no official solicitation number or set-aside details, interested parties are encouraged to monitor the provided UI link for updates and future formal solicitations. The performance location will be at various Port of Seattle facilities and project sites, with no specific city or state specified in the metadata, indicating broad geographic scope across Port operations.

Construction Management

POSTED

about 8 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test/adjust/balance, controls, and regulatory support services across Seattle-Tacoma International Airport’s facilities and infrastructure systems, ensuring optimal performance in a continuous 24/7/365 operational environment. The scope includes identifying and correcting deficiencies in mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems to enhance efficiency, comfort, reliability, and lifespan while maintaining compliance with safety and regulatory standards. Services are delivered through Service Directives and require close collaboration with Aviation Facilities and Infrastructure to meet project deliverables. Work will be managed under an Indefinite-Delivery/Indefinite-Quantity contract, with the Port of Seattle’s Aviation Facilities and Infrastructure team as the primary point of contact. The procurement is classified under NAICS code 541330, reflecting professional, scientific, and technical services related to engineering. Key contacts include Jason Gates as the primary point of contact and Jim Farris as the project manager, both reachable through the Port of Seattle’s official communications. The solicitation was posted on July 31, 2026, with performance expected to occur at the airport location, though specific geographic details are not defined in the provided data.

Aviation Facilities & Infrastructure

POSTED

about 8 hours ago

DEADLINE

Zoning & Land Use Planning SupportThe contract seeks advisory services focused on infill development, zoning alignment, and regulatory processes within designated commercial corridors, aiming to support strategic growth and land use efficiency. The work will involve guiding public and private stakeholders through complex planning frameworks to ensure development aligns with municipal goals, streamlines approvals, and enhances economic vitality in targeted areas. Expertise in local zoning codes, environmental regulations, and community engagement practices will be essential to delivering actionable recommendations and facilitating smoother project pathways. This is a subcontract under the Office of Economic Development for the state of California, classified under NAICS code 541330 for architectural, engineering, and related services. The opportunity was posted on July 31, 2026, with a firm response deadline of September 5, 2026. While specific location details for performance or contact are not provided, the scope implies work centered on urban corridors within California, requiring deep familiarity with state and local regulatory environments. The contract does not specify a set-aside type, indicating it is open to qualified subcontractors without reserved eligibility criteria.

Office of Economic Development

POSTED

DEADLINE

in about 1 month

Investment and Revitalization Strategy for Sacramento County Commercial Corridors

Solicitation # 2026-GEN-0073

Sacramento County is seeking to develop a comprehensive Investment and Revitalization Strategy for its 15 commercial corridors in the unincorporated areas, aiming to address longstanding challenges such as aging infrastructure, underutilized properties, fragmented ownership, and declining private investment. With a population of approximately 1.6 million and a diverse economy anchored by government, healthcare, logistics, education, and emerging sectors like clean technology and life sciences, the County has identified these commercial corridors as vital to economic vitality, community resilience, and long-term fiscal sustainability. Previous planning efforts—including market analyses and strategic reports from 2017 through 2024—have underscored the need for place-based, implementation-focused interventions that integrate housing, retail, public space improvements, and business support to attract private capital and revitalize underperforming districts. This initiative builds on those foundations to create an actionable roadmap that prioritizes opportunities, evaluates barriers, and aligns public resources to maximize impact across varied market conditions. The County is soliciting proposals through solicitation number 2026-GEN-0073, with responses due by September 5, 2026, and the work will be led by the Office of Economic Development based in Sacramento. The selected contractor will be tasked with delivering a practical, data-informed strategy that identifies realistic redevelopment opportunities, outlines prioritized actions for County intervention, and provides a clear framework for leveraging both public and private investment. Emphasis will be placed on strategies that enhance neighborhood-serving businesses, improve the physical environment, expand housing options, and foster equitable economic growth. The project will rely on existing background materials, including market studies and corridor maps, and is designed to ensure that revitalization efforts are tailored to the unique context of each corridor while contributing to broader regional goals. The final strategy must be executable, measurable, and designed to support sustainable fiscal outcomes for the County’s unincorporated communities.

Office of Economic Development

POSTED

DEADLINE

in about 1 month

Fire Alarm System Design & State Fire Marshal ApprovalThe contract involves the design modification or upgrade of existing fire alarm systems within facilities managed by the California Department of Corrections & Rehabilitation, with a primary requirement to secure formal approval from the California State Fire Marshal. This includes preparing and submitting comprehensive technical packages that demonstrate full compliance with applicable state fire codes and safety standards, ensuring all documentation is accurate, complete, and submitted in accordance with regulatory protocols. The work must be executed with precision to meet official approval timelines and technical specifications set forth by the State Fire Marshal’s office. Subcontractors are expected to manage the entire process from initial design adjustments through final certification, with responsibility for all code compliance documentation, submittals, and communications with state authorities. The solicitation is open for responses until September 4, 2026, and is categorized under NAICS code 541330 for engineering services. Performance of the work is expected to occur across various state correctional facilities under the jurisdiction of the California Department of Corrections & Rehabilitation, though specific locations are not detailed in the posting. All contractors must be prepared to demonstrate expertise in fire protection system design and state regulatory processes to qualify.

California Department of Corrections & Rehabilitation

POSTED

DEADLINE

in about 1 month

Fire Alarm Preventative Maintenance & Safety InspectionsThe contract requires the provision of scheduled preventative maintenance and safety inspections for fire alarm systems across all California Department of Corrections & Rehabilitation facilities. Work includes comprehensive testing, diagnostic evaluations, and thorough documentation to ensure system compliance and operational readiness. All services must be completed within 48 hours of receiving notification and are to be performed during normal business hours to minimize disruption to facility operations. The work is governed under NAICS code 541330 and is structured as a subcontract opportunity with a response deadline of September 4, 2026. The contract is administered by the State of California and applies to locations statewide under the jurisdiction of CDCR.

California Department of Corrections & Rehabilitation

POSTED

DEADLINE

in about 1 month

Traffic Signal Timing Support and Optimization

City of Villa Rica

POSTED

DEADLINE

Project Execution, Phasing, and Coordination Plan DevelopmentThe contract calls for the development and implementation of a detailed plan to phase construction activities in a way that ensures the uninterrupted operation of occupied Department of Public Safety facilities. This requires meticulous scheduling of work to minimize disruption to ongoing critical services, with a strong emphasis on risk management strategies to anticipate and mitigate potential impacts on safety, accessibility, and functionality of secured or high-traffic areas. The contractor must coordinate closely with multiple stakeholders including agency personnel, emergency responders, maintenance staff, and possibly the public to align construction timelines with operational needs and safety protocols. The plan must include comprehensive documentation of work sequencing, buffer zones, temporary relocations, noise and dust controls, emergency access routes, and contingency measures for unexpected delays or hazards. All activities must comply with state and federal regulations governing public facility operations and construction in sensitive environments. The solicitation is classified as a subcontract under NAICS code 541330, indicating specialized professional services in architectural or engineering activities, and responses are due by August 14, 2026, with the opportunity posted on the Texas SmartBuy portal. The work will take place across various DPS facilities within Texas, requiring localized planning and adaptability to site-specific constraints and operational demands.

Department of Public Safety

POSTED

DEADLINE

Small and Disadvantaged Business (CBE/SBE/DBE) Subcontracting OpportunitiesBroward County is offering subcontracting opportunities exclusively for certified Community Business Enterprise, Small Business Enterprise, and Disadvantaged Business Enterprise firms across all trades, as part of its commitment to meeting participation goals for underrepresented businesses. These opportunities are open to firms certified under the county’s programs, ensuring equitable access to contracts tied to county-funded projects. The solicitation is categorized under NAICS code 541330, indicating a focus on architectural and engineering services, although the scope extends to all trades relevant to county work. Participation is not limited to a specific project but aligns with broader county initiatives that prioritize diverse vendor engagement. The posting went live on July 31, 2026, with a response deadline of August 7, 2026, giving interested firms one week to submit their interest or proposals. All interactions and submissions must occur through the designated platform at the provided web link, and firms are expected to meet certification requirements in good standing to qualify. There are no additional set-aside designations beyond the CBE, SBE, and DBE certifications, and the county seeks active participation from certified businesses to fulfill its diversity and inclusion objectives.

POSTED

DEADLINE

Process Engineering for Biosolids Drying SystemsThe contract requires the design of core thermal drying systems capable of processing 700 to 800 wet tons of biosolids per day, with detailed engineering deliverables including process flow diagrams, comprehensive heat balances, and seamless integration with emissions control technologies to ensure environmental compliance. The scope centers on process engineering for biosolids drying, emphasizing efficiency, reliability, and scalability within a municipal waste management context. All system design elements must adhere to industry best practices and regulatory standards for air quality and operational safety. This subcontract is issued by Broward County in Florida under NAICS code 541330, with a submission deadline of August 7, 2026, and a posting date of July 31, 2026. The work is intended for performance within Broward County, though specific location details are not provided. There is no set-aside classification indicated, and the contract is open to qualified subcontractors with demonstrated expertise in thermal drying systems for biosolids. While no point of contact is listed, interested parties must submit proposals through the provided online portal before the deadline.

POSTED

DEADLINE

Pre-Solicitation Notice - DRAFT - Engineering Services for Regional Biosolids Facility Design

Solicitation # DRAFT PNC2132449P1

Broward County, Florida, has issued a draft pre-solicitation notice for engineering services related to the design of a regional biosolids facility, identifying this as a preliminary step toward a formal procurement process. This notice is for informational purposes only and does not constitute an active solicitation or binding commitment; all details including timelines, requirements, and evaluation criteria are subject to revision prior to the official release of a Request for Proposals, Letters of Interest, or Request for Qualifications. Interested firms are advised that the provided response deadline of August 7, 2026, is an estimate and the final solicitation will confirm actual start and closure dates. The contract will require engineering expertise to support the design phase of a facility intended to manage biosolids on a regional scale, with performance expected to occur within Florida. Firms seeking to participate must register with Broward County’s electronic bidding system, BPRO, to receive official notifications and access updated documents. The primary point of contact for inquiries is Alex Jurado and Nancy Olesen, reachable via email at aljurado@broward.org. No set-aside type or NAICS code is specified in this draft, and no detailed scope or qualification criteria are provided yet. All future submissions must be made electronically through the BPRO portal, and applicants should monitor the official solicitation link for accurate information and any changes to the procurement process. Participation in this opportunity requires active registration and continuous monitoring of updates through the county’s official procurement platform.

POSTED

DEADLINE

Quality Inspection & Conformance VerificationThe contract mandates the inspection and testing of delivered industrial items to ensure full compliance with specified technical requirements, engineering drawings, and the absence of any defects or nonconformities. This work involves systematic verification processes to confirm that all components meet predefined quality standards prior to acceptance, with an emphasis on precision, documentation, and adherence to industry best practices. The scope is strictly focused on conformance verification and does not extend to manufacturing, modification, or installation of the items. The opportunity is posted as a subcontract under NAICS code 541330, with a deadline for responses set for August 7, 2026, and was made available on July 31, 2026. The contracting entity is DFW International Airport, operating under the Texas state designation, though no specific office address or point of contact details are provided. The place of performance and other geographic details are also unspecified, and there is no set-aside designation or organization type noted. Interested parties must access the full solicitation through the provided Bonfire Hub link to understand procedural requirements and submission guidelines.

Dfw International Airport

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Small Business Subcontracting Support (Administrative)The contract is for administrative support to ensure compliance with Federal Acquisition Regulation subcontracting requirements, specifically focused on tracking expenditures with small businesses and facilitating accelerated payments to small business subcontractors. The work is centered on maintaining accurate records and processes to meet regulatory obligations related to small business participation, with an emphasis on promoting timely financial transactions to meet both compliance goals and small business sustainability needs. The contract is associated with the Defense Logistics Agency under the Department of Defense and falls under NAICS code 541214, which pertains to accounting, bookkeeping, and payroll services. The performance location is at Fort Eustis, Virginia, with a posted date of July 31, 2026, and a response deadline of August 5, 2026. Although the contract type is specified as a subcontract, no set-aside designation is provided, and no point of contact information is included in the data.

Payroll Services

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract requires the provision of hazard warning labels and Safety Data Sheets for welding rods, ensuring full compliance with OSHA Hazard Communication standards and Department of Defense requirements. All labeling and documentation must be submitted for review and approval by the Contracting Officer prior to delivery, with strict adherence to regulatory formatting and content guidelines. The work is tied to performance at Fort Eustis, Virginia, and falls under NAICS code 541690, indicating it is a subcontract for other scientific and technical consulting services. The solicitation remains open for responses until August 5, 2026, with no specific set-aside designation specified.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Supply of Welding Rods (NSN 3439-01-696-3835)The contract requires the supply and delivery of two units of welding rods identified by NSN 3439-01-696-3835 to Fort Eustis, Virginia, with a strict delivery window of five days following contract award. All items must comply with hazardous material labeling regulations and include complete Safety Data Sheets as part of the shipment documentation. The procurement is issued under the NAICS code 332420, indicating classification within the forging and stamping industry, and is administered by the Defense Logistics Agency under the Department of Defense. Performance is designated exclusively at the Fort Eustis location with ZIP code 23604-5577. The contract was posted on July 31, 2026, with responses due by August 5, 2026, and is structured as a subcontract within the DIBBS system under solicitation number SPE8E626T3551.

Metal Tank (Heavy Gauge) Manufacturing

POSTED

DEADLINE

Electrical Wire Supply – MIL-Spec CompliantThe contract encompasses the supply of 100 feet of electrical wire designated by NSN 6145-01-193-7010, manufactured to meet the rigorous MIL-DTL-12000 technical specifications. All units must be packaged in accordance with MIL-STD-2073-1E and clearly marked following MIL-STD-129 requirements to ensure compliance with military logistics and identification standards. The agreement is structured as a firm-fixed-price contract, providing cost certainty for both parties, and requires immediate delivery within five calendar days of order placement, emphasizing the mission-critical and time-sensitive nature of the procurement. This subcontract is issued under the NAICS code 335929 for other electrical equipment and component manufacturing and is managed by the Defense Logistics Agency on behalf of the Department of Defense. The delivery location and point of contact details are not specified, but the contract is accessible through the DIBBS system with the reference number SPE7M0026P4032.

Other Communication and Energy Wire Manufacturing

POSTED

DEADLINE

Cybersecurity and CUI SafeguardingThe contract requires the implementation and ongoing maintenance of NIST SP 800-171 security controls to protect covered defense information and ensure full compliance with DFARS 252.204-7012. This subcontract is under the Defense Logistics Agency, part of the Department of Defense, and focuses on establishing a robust cybersecurity framework that meets federal requirements for handling sensitive unclassified information. The work involves assessing current systems, applying technical and administrative safeguards, and sustaining compliance through continuous monitoring, documentation, and remediation of identified gaps. The contract carries a NAICS code of 541512, indicating it pertains to computer systems design and related services, and is structured as a subcontract with no set-aside designation. All performance activities must align with the standards outlined in NIST SP 800-171, ensuring that CUI is properly identified, stored, transmitted, and accessed only by authorized personnel. The contract is posted as of July 31, 2026, and the place of performance is not specified, meaning work may occur at various locations as required by the subcontractor’s operational needs. Compliance is non-negotiable, and failure to maintain controls could result in contract termination or penalties under federal acquisition regulations.

Computer Systems Design Services

POSTED

DEADLINE

Hazardous Materials Compliance and SDS ManagementThe contract requires the identification, documentation, and continuous management of hazardous materials utilized in manufacturing processes, ensuring strict adherence to regulatory and contractual standards. A core obligation is the timely submission and regular updating of Safety Data Sheets (SDS) to reflect any changes in material composition, handling procedures, or safety protocols, with all documentation maintained in full compliance with established requirements. This ongoing responsibility demands vigilant monitoring and proactive communication to maintain accuracy and compliance across the supply chain. The work is performed under a subcontract classified under NAICS code 541690, issued by the Defense Logistics Agency within the Department of Defense. The contract was posted on July 31, 2026, and its performance is tied to federal defense manufacturing operations, though specific locations are not indicated. Effective execution requires robust systems for tracking hazardous substances, rigorous recordkeeping, and seamless coordination with relevant stakeholders to ensure that SDS documentation remains current and accessible at all times, supporting safety, regulatory compliance, and operational continuity.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Packaging, Labeling, and Palletization ServicesThe contract entails the final packaging, labeling, and palletization of splash guards to meet MIL-STD-129 and RP001 specifications, ensuring full compliance with U.S. Department of Defense packaging and marking standards. All work must be performed in accordance with stringent military guidelines that govern the uniformity, durability, and traceability of labeled items, particularly for logistics and inventory management throughout the defense supply chain. The services are critical to maintaining operational readiness and seamless integration of components into military distribution networks. This subcontract is issued under the Defense Logistics Agency, part of the Department of Defense, with a NAICS code of 493190 indicating it relates to other transportation and warehousing support services. The contract was posted on July 31, 2026, and is accessible via the DIBBS platform, though no specific place of performance or point of contact details are provided. The work will support military logistics requirements, and the contractor is expected to deliver fully compliant, ready-to-ship units that uphold the Department’s rigorous standards for handling, storage, and transportation of defense equipment.

Other Warehousing and Storage

POSTED

DEADLINE

Precision Machining and Fabrication ServicesThe contract involves precision secondary machining, drilling, and finishing operations on splash guard components to meet the dimensional tolerances and surface finish specifications outlined in drawing NR 16236 2540V0744, Rev D. Work under this subcontract requires strict adherence to technical requirements to ensure component functionality and interoperability within defense systems. The operations are critical to the final assembly and performance of the splash guard, necessitating advanced machining capabilities and quality control processes aligned with aerospace and defense industry standards. This agreement falls under NAICS code 332721 for Metal Finishing and is issued by the Defense Logistics Agency under the Department of Defense. The contract was posted on July 31, 2026, and performance is expected to occur at an unspecified location. The primary intent is to secure specialized fabrication services to support military equipment procurement, with no set-aside designation indicated. The solicitation is managed through the DIBBS system under contract number SPE7L126D63ET, and all work must comply with federal contracting guidelines governing defense subcontracting.

Precision Turned Product Manufacturing

POSTED

DEADLINE

Rubber or Elastomeric Component SupplyThe contract pertains to the supply of rubber or elastomeric components, specifically rubber seals, gaskets, or flexible mounts designed for use in splash guard assemblies, as defined by technical drawing NR 16236 2540V0744. These components are critical for ensuring proper sealing and vibration dampening in military or defense-related equipment, and the work falls under the NAICS code 326299 for other rubber product manufacturing. The contract is classified as a subcontract and was posted on July 31, 2026, indicating it is part of a broader procurement effort managed by the Defense Logistics Agency under the Department of Defense. The place of performance and point of contact information are not specified, and no set-aside designation is indicated, meaning the award is open to all qualified vendors without socioeconomic preferences. The award is accessible via the DIBBS system under contract number SPE7L126D63ET.

All Other Rubber Product Manufacturing

POSTED

DEADLINE

Manufacture of Vehicular Splash GuardsThe contract entails the full production of vehicular splash guards according to military drawing NR 16236 2540V0744, Revision D, requiring end-to-end manufacturing from material sourcing and fabrication to rigorous quality control and adherence to defense specifications. All work must comply with applicable military and defense standards to ensure performance, durability, and interoperability within military vehicle systems, with an emphasis on consistent traceability and compliance throughout the production lifecycle. This is a subcontract under the auspices of the Defense Logistics Agency, part of the Department of Defense, and is classified under NAICS code 332322 for forging and stamping operations. The contract was posted on July 31, 2026, and performance is expected to meet the exacting standards of the DoD supply chain, though specific delivery locations and point of contact details are not provided. The award is managed through the DIBBS system with the contract identification SPE7L126D63ET.

Sheet Metal Work Manufacturing

POSTED

DEADLINE

Solicitation # SPE8E6-26-T-3551

The contract pertains to the procurement of two ROD, WELDING units identified by NSN 3439-01-696-3835 under solicitation number SPE8E6-26-T-3551, issued by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on June 30, 2026, with a response deadline set for July 13, 2026, indicating a two-week window for potential vendors to submit bids. The requirement is classified as a federal procurement with no specific set-aside designation, and the place of performance and office address details are not provided, though the contracting entity is based in the United States. All correspondence and submissions must be coordinated through the designated DIBBS platform linked in the contract data.

Welding and Soldering Equipment Manufacturing

POSTED

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2104

The contract pertains to the procurement of 12-volt lead acid storage batteries, specifically the Power-Sonic Corporation model PG-12V35FR, with a total quantity of 90 units distributed across multiple Navy vessels. These batteries are commercial off-the-shelf items with a mandatory Type I shelf life of 12 months, non-extendable, and must be supplied with two bolts and two washers for terminal cable attachment. Strict compliance with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements is enforced, including the special marking code 32 to indicate shelf life classification. All shipments must adhere to DLA packaging and palletization rules, with hazardous materials handling governed by IP025, and mercury or mercury compounds are prohibited except where functionally necessary and explicitly authorized. Sampling and inspection follow MIL-STD-1916 or equivalent zero-based plans, with zero non-conformances required unless otherwise specified. The contract uses a firm fixed price with zero quantity variance, origin inspection and acceptance, and FOB origin terms. Delivery must occur within 60 days of award, and all items must be shipped via traceable freight using VSM, explicitly forbidding parcel post. Each shipment is directed to specific Navy vessel addresses using RDD codes, with transportation governed by DLAD procedural notes, and delivery timelines are individually assigned, ranging from March to June 2026.

Battery Manufacturing

POSTED

DEADLINE