Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on June 28, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

First Article Testing (FAT) Support and Production Sampling

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380
New
SLED
Certified Hazardous Waste Analytical TestingThis subcontract opportunity with the California Department of Transportation involves providing certified chemical analyses of waste samples for prime contractors working on hazardous waste projects. The selected provider will conduct laboratory testing to determine disposal requirements and deliver analytical reports essential for manifest and profiling purposes. Performance of these services is centered in Inyo. To be eligible, the contractor must operate a state-certified laboratory holding both SWRCB-ELAP and CalEPA Environmental Laboratory Accreditation Program certifications. Interested parties must submit their responses by November 10, 2026, under NAICS code 541380.
California Department of Transportation

POSTED

about 10 hours ago

DEADLINE

in 14 days
NAICS: 541380
New
SLED
Lead Testing and Environmental SamplingThis subcontract for Lead Testing and Environmental Sampling supports prime contractors on Gwinnett County Government firing range projects. The scope of work involves performing lead-level testing and wipe sampling on cleaned surfaces and within mechanical rooms to ensure lead concentrations remain below the threshold of 400 ug/ft2. All activities must be conducted using lead sampling kits and laboratory analysis in strict accordance with EPA and OSHA lead testing standards. The selected provider is responsible for delivering comprehensive testing reports and official clearance documentation to verify that the facilities are safe for occupancy and use. This opportunity falls under NAICS code 541380 and is associated with the state of Georgia. Interested parties should note the response deadline of November 13, 2026.
Gwinnett County Government

POSTED

about 11 hours ago

DEADLINE

in 16 days
NAICS: 541380
New
SLED
Hazardous Waste Sampling and Profiling Services
OC Waste & Recycling

POSTED

about 12 hours ago

DEADLINE

in 28 days
NAICS: 541380
New
SLED
Third-Party Construction Materials Testing & InspectionThis subcontract for Third-Party Construction Materials Testing and Inspection supports the University of Massachusetts Medical School West Garage Modernization projects in Shrewsbury. The selected provider will perform independent quality assurance, field inspections, and materials testing for concrete, asphalt, and steel to ensure all construction materials comply with engineering specifications. Key deliverables include the submission of certified test reports and detailed inspection logs. To qualify for this engagement, the contractor must hold professional PE licensure and maintain laboratory accreditation through AASHTO or ASTM. The solicitation was posted on October 27, 2026, with a response deadline of November 17, 2026. The project falls under NAICS code 541380 and is managed through the University of Massachusetts System.
University of Massachusetts System

POSTED

about 14 hours ago

DEADLINE

in 20 days
NAICS: 541380
New
SLED
West Garage Modernization - 3rd Party Testing
Solicitation # BD-27-1109-UMMS-UMMS-134854
The University of Massachusetts System, specifically the UMass Medical School, has issued solicitation BD-27-1109-UMMS-UMMS-134854 for third party construction materials testing and inspection services as part of the West Garage Modernization project. This open market procurement is based in Shrewsbury, Massachusetts, with the performance of services occurring at the Washington Street location. The solicitation was posted on October 27, 2026, and requires responses by November 17, 2026. Administrative oversight is managed by the UPST Procurement Office, with Toby Lau serving as the primary purchaser. All inquiries and billing are directed to the office located at 50 Washington Street, Shrewsbury, MA 01581. While the contract specifies a single line item for the required testing and inspection services, the total contract value and specific unit pricing are not disclosed in the provided documentation. Proposals must be submitted through the COMMBUYS system.
University of Massachusetts System

POSTED

about 14 hours ago

DEADLINE

in 20 days
NAICS: 541380
New
SLED
Site Investigation and Field Testing
City of Virginia Beach

POSTED

about 15 hours ago

DEADLINE

in about 1 month
NAICS: 541380
New
SLED
Structural Special Inspections and Third-Party ReviewThis subcontract involves providing independent third-party structural reviews and special inspections for prime contractors working on University of Connecticut facility projects. The scope of work includes conducting special inspections for concrete, masonry, and steel, as well as performing construction observation and reviewing material submittals. The selected provider is responsible for delivering comprehensive inspection reports and Statements of Special Inspections to ensure project compliance. To qualify for this engagement, the provider must hold a Connecticut Professional Engineering license and possess all relevant inspector certifications. Managed by DAS Procurement for the state of Connecticut, the solicitation was posted on October 27, 2026, with a response deadline of November 24, 2026. The contract falls under NAICS code 541380.
DAS Procurement

POSTED

about 15 hours ago

DEADLINE

in 27 days
NAICS: 541380
New
SLED
Material Testing ServicesThis subcontract opportunity with the City of Waco involves providing specialized material testing services for prime contractors working on city construction projects. The scope of work focuses on the testing of asphalt and concrete materials to verify strict compliance with both City of Waco and TXDOT specifications, concluding with the delivery of formal material testing reports and certifications. The solicitation is categorized under NAICS code 541380. Interested parties must submit their responses by the deadline of December 8, 2026. Further details regarding this procurement can be accessed through the Texas SmartBuy portal.
CITY OF WACO

POSTED

about 16 hours ago

DEADLINE

in about 1 month
NAICS: 541380
New
SLED
Construction Materials Testing (CMT)This subcontract for Construction Materials Testing (CMT) involves providing specialized laboratory testing services for prime contractors operating on projects at California State University, Chico. The scope of work includes the collection of field samples for asphalt, soil, and concrete, followed by rigorous laboratory analysis to determine composition, compaction, and strength utilizing sieves and compression machines. All testing procedures must strictly adhere to ASTM standards to ensure structural integrity and quality control. The selected provider is responsible for delivering detailed daily reports and comprehensive material test result summaries. This opportunity is categorized under NAICS code 541380 and is centered in Chico, California. Interested parties must submit their responses by the deadline of November 5, 2026.
California State University, Chico

POSTED

about 19 hours ago

DEADLINE

in 9 days
NAICS: 541380
New
SLED
Certified Welding Inspection ServicesThis subcontract for Certified Welding Inspection Services involves providing specialized inspection and testing of structural steel components and welding for prime contractors at California State University, Chico. The scope of work includes conducting visual inspections of welds, performing non-destructive testing on structural joints, and verifying that all welding procedures are followed correctly. All services must be delivered in the form of detailed welding inspection reports and test results. To ensure quality and safety, the contractor must employ AWS/SNT Certified Welding Inspectors and maintain strict compliance with AWS and ANSI standards. The project is located in Chico, California, under NAICS code 541380. Interested parties must submit their responses by the deadline of November 5, 2026.
California State University, Chico

POSTED

about 19 hours ago

DEADLINE

in 9 days
NAICS: 541380
New
SLED
Campus Consulting – Construction Materials Testing And Special Inspection Services
Solicitation # RFP2026-08AM
California State University, Chico is soliciting proposals under RFP2026-08AM for a non-exclusive Task Order Service Agreement to provide special inspection and materials testing services. The selected service provider will supply certified staff, including ICBO Certified Special Inspectors and AWS/SNT Certified Welding Inspectors, to support contractors on an as-needed basis. All work must comply with the 2025 California Building Code and relevant ASTM, ICBO, and ANSI standards. The contract has an initial term of two years, with the option to renew for two additional two-year terms. Proposals are due by November 5, 2026, at 3:00 PM and must be submitted electronically to Amber Marquis. Evaluation criteria include a standard fee schedule, firm experience, staffing resumes, project history regarding scale and average cost, and specific experience with California State University institutions. Awarded providers must register with the Department of Industrial Relations for prevailing wage compliance and maintain comprehensive general liability insurance with a 4 million dollar general aggregate. Additionally, the contract requires that all work be performed within the United States and prohibits the provider from advising the university on public contracting. Payments will be processed monthly in arrears using the CSU invoice format.
California State University, Chico

POSTED

about 19 hours ago

DEADLINE

in 9 days
NAICS: 541380
New
International
Water Treatment & Chemical Dosing SystemsThis subcontract for Water Treatment and Chemical Dosing Systems involves providing specialized maintenance for automated chemical dosing systems on facility projects for the City and County of Swansea. The scope of work includes calibrating dosing pumps, testing and balancing pool water chemistry, and repairing dosing controllers and sensors. A critical component of the contract is ensuring strict compliance with health and safety standards regarding the handling of hazardous chemicals. The selected provider is responsible for delivering fully calibrated dosing systems and detailed water quality compliance reports. This opportunity was posted on October 27, 2026, with a response deadline of November 23, 2026. The project falls under NAICS code 541380 and is designed to support prime contractors operating within the City and County of Swansea.
City & County of Swansea

POSTED

about 20 hours ago

DEADLINE

in 26 days

AI Contract Overview

Show more

This subcontract, issued by the Department of Defense Fluid Handling Division, requires the provision of support for government-led First Article Testing and production sampling. The selected contractor must ensure all testing activities are completed within a 120-day window and must prepare and submit all necessary quality documentation in strict accordance with MIL-STD-1916 and AS9100 standards. The work is designated under NAICS code 541380 and will be performed in Cherry Point. Interested parties must submit their responses by July 9, 2026, to meet the requirements of this procurement action.

General Info

DoD subcontract for First Article Testing and sampling in Cherry Point by July 2026.

Agency

Department Of Defense → FLUID HANDLING DIVISION

NAICS

541380 - Testing Laboratories and Services

Place of Performance

CHERRY POINT, NC, 28533-5040, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M4-26-T-221P.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

HOSE, NONMETALLIC

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Support government-led First Article Testing within 120 days, including preparation and submission of quality documentation per MIL-STD-1916 and AS9100.

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 326122
New
DIBBS
PLATE, ORIFICE, FLUID
Solicitation # SPE7M3-26-T-7207
Solicitation SPE7M3-26-T-7207 is a request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of one fluid orifice plate. The required item is identified by NSN 4730017015377 and corresponds to Sargent Aerospace and Defense, LLC part number 23509-400-1. The procurement is designated as a small business set-aside under NAICS code 326122. Delivery is required within 20 days after receipt of order, with an original required delivery date of June 29, 2026. The shipping terms are FOB Origin, and the item is to be delivered to the NAVSEALOGCEN Warehouse Operations in Mechanicsburg, Pennsylvania. The contract mandates strict adherence to technical and quality standards, including the DLA Master List of Technical and Quality Requirements, ASTM D3951 for packaging, and MIL-STD-129 for marking and labeling. Specific prohibitions are in place regarding the use of Class I ozone-depleting chemicals and the acquisition of munitions list items from Communist Chinese sources. Inspection and acceptance will occur at the destination per FAR 52.246-2. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with various DFARS and FAR clauses covering cybersecurity, whistleblower rights, and the Buy American Act.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 326122
New
DIBBS
NOZZLE, SPRAY, FLUID-
Solicitation # SPE7M3-26-T-8106
Solicitation SPE7M3-26-T-8106 is a small business set-aside request for quotation issued by the Department of Defense, specifically the DLA Land and Maritime Fluid Handling Division. The contract is for the procurement of one fluid-emulsion spray nozzle, identified by NSN 4730-01-693-4850. The item is destined for the USS Daniel Inouye DDG 118, with a required delivery date of July 13, 2026, and a delivery window of 20 days after receipt of the order. Shipping is designated as FOB Origin, and both inspection and acceptance will occur at the destination. This procurement is subject to strict export controls under ITAR and EAR regulations, requiring offerors to possess an approved US/Canada Joint Certification Program certification and DLA authorization to access technical data. The award process may be automated and includes a price evaluation preference for HUBZone small business concerns. Technical requirements are governed by the DLA Technical and Quality Master List, and items produced via additive manufacturing are ineligible for award. Compliance with the Buy American Act, Berry Amendment, and DFARS cybersecurity reporting standards is required. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 326220
New
DIBBS
HOSE, NONMETALLIC
Solicitation # SPE7M4-26-T-9886
Solicitation SPE7M4-26-T-9886, issued by the Department of Defense Fluid Handling Division, is for the procurement of one nonmetallic hydraulic hose, specifically a rubber covered, one wire braid, medium pressure hose under NSN 4720-01-701-0915. The technical specifications require an inside diameter of 2.38 inches, a minimum inside bending radius of 24.00 inches, a maximum operating pressure of 350.0 lbs psi, and a burst test pressure of 1400.0 lbs psi. Delivery is required within 20 days after receipt of order, with the destination and acceptance point located at FPO AP 96678. The acquisition is categorized under NAICS code 326220 and incorporates a HUBZone price evaluation preference. Compliance with the Buy American Act and the Berry Amendment is required for quotes above the micro-purchase threshold. Offerors must maintain active registration in the System for Award Management and meet NIST SP 800-171 cybersecurity assessment requirements. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, and all electronic invoicing must be processed through the Wide Area WorkFlow system.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 326122
New
DIBBS
PLATE, ORIFICE, FLUID
Solicitation # SPE7M3-26-T-7046
Solicitation SPE7M3-26-T-7046, issued by the DLA Land and Maritime Fluid Handling Division, is for the procurement of one fluid orifice plate, identified by NSN 4730-01-701-5377 and Sargent Aerospace & Defense P/N 23509-400-1. The requirement is categorized under NAICS code 326122. Delivery is required within 20 days after receipt of order, with shipping terms set as FOB Origin. Inspection and acceptance will occur at the destination, specifically the NAVSEALOGCEN Warehouse Ops in Mechanicsburg, Pennsylvania. The contract mandates strict adherence to DLA packaging and marking standards, including RP001 for palletization and MIL-STD-129 for labeling. Technical and quality requirements are governed by the DLA Master List, which takes precedence over ASTM D3951. Notably, the use of Class I ozone-depleting chemicals is prohibited. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, including those regarding cybersecurity, the Buy American Act, and the safeguarding of covered defense information.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332999
New
DIBBS
HOSE, AIR DUCT
Solicitation # SPE7M4-26-T-437V
Solicitation SPE7M4-26-T-437V is a request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of 72 air duct hoses intended for use in Blackhawk helicopters. Each hose must have a 2 inch inner diameter, an overall length of 26 inches, and include a 2 inch soft cuff on both ends. The procurement is categorized under NAICS 332999, with delivery required within 168 days after order, targeting a need ship date of March 23, 2027, and an original required delivery date of May 16, 2027. Delivery is established as FOB Origin, with the final destination being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements, specifically citing the DLA Master List (RA001) and the removal of government identification from non-accepted supplies (RQ011). Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow RP001. Inspection and acceptance will occur at the destination per FAR 52.246-1. Offerors must submit quotes via the DIBBS system by October 5, 2026, and comply with various federal regulations, including the Buy American Act, DFARS cybersecurity standards for safeguarding covered defense information, and the use of the Wide Area WorkFlow system for electronic invoicing and payment.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 326220
New
DIBBS
HOSE, NONMETALLIC
Solicitation # SPE7M4-27-T-0180
Solicitation SPE7M4-27-T-0180 is a fixed-price request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of five nonmetallic hoses, identified by NSN 4720015897624 and part number T00250-5083. The procurement falls under NAICS code 326220. Quotations were due by October 16, 2026, with a required delivery date of September 30, 2026. Delivery is specified as FOB Origin with a delivery window of 20 days after order, shipping to a weapons company in Grants Pass, Oregon. The contract mandates strict adherence to packaging and marking standards, requiring compliance with MIL-STD-129 and ASTM D3951, though the DLA Master List of Technical and Quality Requirements takes precedence. Palletization must follow RP001 guidelines. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment requests. The solicitation also incorporates various FAR and DFARS clauses regarding cybersecurity, hazardous material labeling, and domestic material restrictions, including the Buy American Act and the Berry Amendment.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 326122
New
DIBBS
MANIFOLD, HYDRAULIC SYS
Solicitation # SPE7M3-26-T-9074
Solicitation SPE7M3-26-T-9074 is a request for quotations issued by the DLA Land and Maritime Fluid Handling Division for the procurement of two hydraulic system manifolds, identified by NSN 4730-01-711-0828 and Polaris Sales Inc part number 1801251. The contract requires delivery to DLA Distribution San Joaquin in Tracy, California, with a need ship date of March 9, 2027, and an original required delivery date of March 30, 2027. Terms are established as FOB Origin, with both inspection and acceptance occurring at the destination. Compliance requirements include adherence to MIL-STD-129 for marking and labeling, ASTM D3951 for packaging, and RP001 for palletization. The contractor must ensure that no Class I ozone-depleting chemicals are used in the items. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various DFARS and FAR clauses, including safeguarding covered defense information and adhering to the Buy American Act. Offerors must represent their small business size status under NAICS code 326122 and disclose any use of covered defense telecommunications equipment.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, METAL
Solicitation # SPE7M4-26-T-360S
Solicitation SPE7M4-26-T-360S is a fixed-price procurement issued by the DLA Land and Maritime Fluid Handling Division for 12 units of metal hose assemblies, identified by NSN 4720-01-547-8193. The delivery is required within 168 days after order, with a need ship date of February 16, 2027, and a final delivery date of April 30, 2027, to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. While the contract specifies FOB Destination Other, offerors are instructed to submit quotes based on FOB Origin. The contract mandates strict adherence to quality and technical standards, requiring manufacturers to maintain an inspection system compliant with ISO 9001:2015 or an equivalent standard. Key requirements include supply chain traceability documentation per DLA directives, packaging according to ASTM D3951, and marking in accordance with MIL-STD-129. Due to the nature of the technical data, eligible offerors must possess an approved Joint Certification Program certification and authorization from the DLA controlling authority to access export-controlled data. Administrative compliance requires the use of the Wide Area WorkFlow system for invoicing and receiving reports. The procurement is subject to various federal regulations, including the Buy American Act and the Berry Amendment for domestic material restrictions. Evaluation may include a price preference for HUBZone concerns. Destination inspection is required per FAR 52.246-2, and the contractor must comply with specific DLA Master List technical and quality requirements, including configuration change management and bare item marking.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 331210
New
DIBBS
Aerospace Grade Metal Tubing SupplyThis subcontract, managed by the Fluid Handling Division of the Department of Defense, involves the supply of aerospace grade raw metal tubing for prime contractors working on DLA Land and Maritime aircraft engine projects. The required tubing must feature a 1.250 inch outer diameter and a 0.035 inch wall thickness, strictly adhering to GE Drawing 1296M75 Rev N. Performance for this contract takes place at Tinker AFB. To ensure quality for critical application items, the supplier must provide full material certifications and Mill Test Reports. Additionally, all delivered stock must comply with the Buy American Act. The solicitation was posted on October 23, 2026, with a response deadline of October 28, 2026, under NAICS code 331210.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

5 days ago

DEADLINE

in about 8 hours
View Details
NAICS: 336413
New
DIBBS
Precision Aerospace Tube FabricationThis subcontract through the Department of Defense Fluid Handling Division requires the manufacture of 13 precision metal tube assemblies for DLA Land and Maritime aircraft engine projects. The fabrication must adhere to General Electric Drawing 1296M75 Rev N and Specification P3TF19-S2, specifically producing tubes with a 1.250 inch outer diameter and a 0.035 inch wall. Performance will take place at Tinker AFB. Eligible contractors must possess precision tube bending equipment and hold either SAE AS9003 or ISO 9001 certification. Additionally, the provider must be a prequalified source or secure approval from the Government Design Control Activity. The response deadline for this opportunity is October 28, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

5 days ago

DEADLINE

in about 8 hours
View Details
NAICS: 332710
New
DIBBS
Supply of Tube and Fittings, MThis subcontract involves the supply of 3,000 units of specialized tubes and fittings for prime contractors supporting Department of Defense supply contracts. Managed by the Fluid Handling Division, the contract requires all materials to be manufactured or sourced in strict accordance with NSN 013156793, FSC 4710, and specific DLA Technical and Quality Requirements. Performance will take place at Tinker AFB. The provider is responsible for preparing all items for Government-Arranged Transportation under the First Destination Transportation program. Additionally, the contractor must maintain strict cybersecurity compliance, adhering to NIST SP 800-171 and DFARS 252.204-7012 standards. The solicitation was posted on October 23, 2026, with a response deadline of October 28, 2026.
Machine Shops

POSTED

5 days ago

DEADLINE

in about 8 hours
View Details
NAICS: 332999
New
DIBBS
Supply of Bypass Tubes (NSN 4320007909742)This subcontract involves the manufacture or sourcing of six bypass tubes identified by NSN 4320007909742 for the Department of Defense Fluid Handling Division. The components must meet exact technical specifications and are intended for prime contractors operating under Defense Logistics Agency supply contracts. Performance will take place at Hill AFB, with the final units packaged for Government-Arranged Transportation. The contractor is required to maintain strict cybersecurity standards, ensuring full compliance with NIST SP 800-171 and DFARS 252.204-7012 to safeguard covered defense information. This procurement falls under NAICS code 332999, with a response deadline set for October 28, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

5 days ago

DEADLINE

in about 8 hours
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 541380
Closed
DIBBS
Hazardous Materials Compliance and Labeling Services
Defense Logistics Agency

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 541380
Closed
DIBBS
Radioactive Materials Identification & Labeling
FLUID HANDLING DIVISION

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 541380
Closed
DIBBS
Factory Acceptance Testing (FAT) Services
LAND SUPPLY CHAIN

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 541380
Closed
DIBBS
Radioactive Materials Labeling (if applicable)
LAND SUPPLY CHAIN

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 541380
Closed
DIBBS
Packaging, Labeling, and Hazard Communication Compliance
FLUID HANDLING DIVISION

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 541380
Closed
DIBBS
Hazardous Materials Testing & Analysis
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 541380
Closed
DIBBS
Quality Inspection & Destination Acceptance Support
ACTIVE DEVICES DIVISION

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 541380
Closed
DIBBS
Military Packaging & Marking Services
LAND SUPPLY CHAIN

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 541380
Closed
DIBBS
First Article Testing (FAT) Services
ASC COMMODITIES DIVISION

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 541380
Closed
DIBBS
Quality Inspection and Acceptance Sampling
NUCLEAR REACTOR PROGRAM

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 541380
Closed
DIBBS
Military-Compliant Labeling and Bar-Coding
LAND SUPPLIER OPNS ENGINES

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 541380
Closed
DIBBS
Packaging and Labeling Compliance Services for Military Shipment
FLUID HANDLING DIVISION

POSTED

4 months ago

CLOSED

4 months ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS