Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Fitness Stability Ball Supply – 55cm Red (Medical Grade)

Active

Federal

Response Deadline07/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks the supply of 100 units of 55cm red medical-grade stability balls designed for physical therapy applications, with all products required to meet federal labeling and safety standards to ensure compliance for healthcare use. The items must be manufactured and delivered in accordance with rigorous medical-grade specifications, emphasizing durability, non-slip surfaces, and resistance to punctures or degradation under clinical conditions. This is classified as a subcontract under NAICS code 339940, indicating the procurement is part of a broader supply chain initiative managed by the Department of Defense’s Medical Supply Chain FSH. The solicitation was posted on July 21, 2026, with a firm response deadline of July 28, 2026, and bidders must submit proposals through the designated DIBBS platform. While no set-aside provisions are specified, the order is intended for direct use within military or veteran healthcare facilities supported by the Department of Defense. Delivery and compliance verification will be critical, with all units required to be fully labeled and certified prior to acceptance, and performance is expected to align with the operational demands of rehabilitative therapy programs across defense medical systems.

General Info

100 red 55cm medical-grade stability balls for DoD therapy use, must meet federal safety standards and be delivered by July 28, 2026.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

339940 - Office Supplies (except Paper) ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 21

subcontract

Response DeadlineJul 28

Submission deadline

Response Deadline

07/28/2026, 05:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of 100 units of 55cm red medical-grade stability balls for physical therapy use, compliant with federal labeling and safety standards.

Similar Contracts

Same NAICS industry code

Newcastle Promotional Items neededThe Chickasaw Nation is seeking quotations for promotional items requiring 350 units each in two colors—black and blue—embroidered with the Newcastle “N” logo in white. All items must be delivered by August 31st, with bids due no later than July 27th, 2026. The solicitation is open under number 27494 and is posted on the Chickasaw Nation’s business network portal, with inquiries directed to colee.dean@chickasaw.net. This procurement is classified as a tribal solicitation with no set-aside designation, and no NAICS code has been assigned. The items are to be delivered to an unspecified location within the Chickasaw Nation’s service area, and bidders must ensure full compliance with the specified logo, color, and quantity requirements to be considered.

Chickasaw Nation

POSTED

DEADLINE

Supply of Ruggedized Photographic Equipment Cases (NSN 6760015190700)The contract requires the manufacture or supply of 22 ruggedized photographic equipment cases that meet exacting military NSN specifications, specifically NSN 6760015190700, designed for durability and operational reliability under demanding field conditions. The deliverables include not only the cases themselves but also full compliance with packaging, labeling, and hazardous materials handling standards to ensure safe transit, storage, and use within military environments. This is a subcontract under the Department of Defense with the performing office identified as Construction & Equipment T & IFO EQ, and the items are to be delivered to Port Hueneme, California, ZIP 93041-4000. The North American Industry Classification System code 339940 indicates the work falls under Other Miscellaneous Manufacturing. The solicitation was posted on July 23, 2026, with a firm response deadline of August 3, 2026, leaving a window of approximately two weeks for qualified vendors to submit proposals. While no set-aside designation is specified, participation is restricted to subcontractors responding to a larger procurement effort, and all offerings must adhere strictly to military standards without deviation. The contract does not include point of contact details, indicating that all inquiries and submissions must follow the official DIBBS portal process through the provided link. Failure to comply with NSN requirements, packaging norms, or hazardous materials protocols will result in disqualification, making technical precision and regulatory adherence paramount for any potential offeror.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

Custom DCPS LanyardsThe District of Columbia’s Chief Technology Officer (OCTO) has issued a forecast for custom DCPS lanyards, signaling an upcoming procurement opportunity intended to supply branded lanyards for use by staff or students within the DC Public Schools system. Although the solicitation number, NAICS code, set-aside details, and organization type are not yet specified, the posting date of July 23, 2026, indicates this is a forward-looking announcement, allowing potential vendors to prepare for a future bid. The place of performance and agency address details remain unspecified, suggesting that final logistics and delivery requirements will be determined during the subsequent solicitation phase. There is no listed point of contact, meaning inquiries should be directed through the official procurement portal referenced in the UI link until further details are released. This forecast serves as a notice to interested suppliers that a contract for custom-designed lanyards will soon be available for bidding under the District’s procurement system.

Chief Technology Officer (OCTO)

POSTED

DEADLINE

Velcro Name TagsThe Metropolitan Police Department of the District of Columbia has issued a forecast for Velcro name tags, indicating a planned procurement action scheduled for the future. This forecast is not a solicitation and does not represent a guaranteed contract award, but signals intent to acquire name tags featuring Velcro fasteners likely for use by department personnel. No solicitation number, North American Industry Classification System code, set-aside details, or point of contact information is provided, and the place of performance and agency address fields are incomplete. The posting date is July 23, 2026, suggesting this forecast is for a future acquisition activity, possibly for fiscal planning or vendor awareness purposes. Interested parties should monitor official channels for subsequent solicitations to respond when formally invited.

Metropolitan Police Department (MPD)

POSTED

DEADLINE

Name Tags and BadgesThe Metropolitan Police Department of the District of Columbia has issued a forecast for name tags and badges, signaling an upcoming procurement opportunity. The solicitation is set to be posted on July 23, 2026, and is intended to support the department’s operational needs for official identification items. There is no solicitation number yet, and details such as NAICS code, set-aside type, or organizational categorization have not been specified, indicating the requirement is still in the planning phase. The place of performance and agency office address have not been defined, but the contract is expected to serve the Metropolitan Police Department across its jurisdiction within the District of Columbia. No point of contact information is currently available, and interested vendors should monitor the provided UI link for future updates as the procurement progresses toward a formal solicitation.

Metropolitan Police Department (MPD)

POSTED

DEADLINE

Plastic Protractor ManufacturingThe contract calls for the manufacture of rectangular plastic protractors measuring 1 3/4 by 6 inches with a one-arm design, fully compliant with DLA technical specifications and applicable federal standards. The products must meet rigorous quality and functional requirements to ensure accuracy and durability under military use conditions. Production is to be performed at the designated place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and all deliverables must adhere strictly to the technical criteria outlined by the Department of Defense. The contract is structured as a subcontract under NAICS code 339940, which classifies it within miscellaneous manufacturing industries, specifically targeting the production of nonmetallic fabrication products. The solicitation was posted on July 22, 2026, with a response deadline set for August 3, 2026, indicating a narrow window for interested parties to submit proposals. All submissions must be completed through the designated DIBBS portal by the stated deadline, and compliance with federal procurement protocols is mandatory.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

FLAGSTAFFThe flagstaff is an indoor 7-foot pole constructed in two sections, made from select hardwoods including ash, beech, birch, elm, locust, maple, oak, or pecan, with a maximum moisture content of 9 percent and a smooth, machine-turned, sanded finish over a dark oak stain. The surface must be sealed with lacquer, varnish, or polyurethane to produce a high-gloss, bubble-free, even coating that preserves the natural wood grain and passes a tissue-paper adhesion test. The two sections are joined by a seamless brass screw joint measuring 6 to 7 inches in length, with chamfered edges and secured using brass screws or rivets. The assembled pole must measure exactly 84 inches plus or minus 3/8 inch, with the top section at 48 inches and the bottom at 36 inches, both within strict tolerances. The pole maintains a consistent 1-1/4 inch diameter throughout, with a permissible slight taper at the top. A cast brass or aluminum alloy ferrule, 2 to 3 inches long with standard 3/4-inch pipe threads, is mounted at the top and includes a screw ring for attaching the cord and tassels. All metal components, including the ferrule and mounting hardware, must be polished to a mirror-like finish and coated with a gold-tinted brass lacquer matching Cable No. 80068. Knobs or buttons for securing leather flag tabs are evenly spaced 2 feet 10-3/4 inches apart and aligned vertically, positioned 3/8 to 1/2 inch below the ferrule. Each pole is packaged singly as one unit of issue and must meet all DLA packaging standards under MIL-STD-2073-1E and MIL-F-40048. The contract requires 400 units to be delivered to Arizona Industries for the Blind in Phoenix, Arizona, with a firm fixed price, zero variance allowed, and an delivery deadline of 142 days after award. Inspection and acceptance occur at destination, and the item is part of a larger indoor flag set.

C AND T SUPPLY CHAIN

POSTED

DEADLINE

Supply of Protective Photographic Case (NSN 6760014912760)

Defense Logistics Agency

POSTED

DEADLINE

Identification Marker Manufacturing and Supply

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Microporous Filtering Disk ManufacturingThe contract entails the manufacture of 29,400 microporous filtering disks, packaged in 294 units of 100 disks each, designed specifically for laboratory microfiltration applications in aircraft fuel testing. Each disk has a 47 mm diameter and a 9.6 cm² surface area, featuring 0.8 AOS filtration media to ensure precise and consistent filtration performance under controlled test conditions. The work is classified under NAICS code 339940 and is issued as a subcontract under the Department of Defense’s Medical Supply Chain FSH, with performance required at Tracy, California, ZIP 95304-5000. The solicitation was posted on July 21, 2026, with responses due by July 27, 2026, indicating a tight turnaround for technical and manufacturing proposals to meet defined specifications.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Commercial Paint Brush SupplyThe contract involves the supply of 1,716 paint brushes that meet NSN compliance standards, sourced as a commercial off-the-shelf item. The vendor is responsible for all aspects of procurement, including sourcing the brushes, proper packaging, labeling, and preparing the shipment for FOB origin delivery. This requirement falls under NAICS code 339940 and is issued by the Defense Logistics Agency under the Department of Defense. The contract type is designated as a subcontract, and while no set-aside information is provided, performance is expected to align with federal procurement standards for commercial items. The solicitation was posted on July 21, 2026, and the award is accessible via the DIBBS system, though no specific point of contact or place of performance location is listed.

Defense Logistics Agency

POSTED

DEADLINE

DISK, FILTERING, MICROPOThe contract pertains to the procurement of 294 packages of microporous filtering disks, each package containing 100 units, for a total of 29,400 individual filters. Each disk has a diameter of 47 mm and a filtering surface area of 9.6 square centimeters, constructed from cloth material with a thin 0.8 AOS filtration media, specifically designed for laboratory microfiltration applications, particularly for testing aircraft fuel. The item is identified by the NSN 6640-00-967-0501 and is part of a solicitation issued under number SPE2DH-26-Q-0095, with a response deadline of July 27, 2026, and a required delivery timeframe of 30 days after delivery order. The contract incorporates technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with compliance determined by the version in effect on the solicitation or award date depending on acquisition size. Packaging must adhere to DLA procurement standards, and non-accepted supplies must have all government identification removed. Performance is to be delivered to Tracy, CA, with Joseph Rucci listed as the primary point of contact for procurement inquiries.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

FOOTWEAR COVERS, OPERATDisposable, nonconductive, high-style foot covers designed for operating room use are required in blue, with a universal fit extending leg-up to the knee, featuring a poly-coated shoe area and elastic bands at both the ankle and knee for secure fit. The soles include an adhesive strip for enhanced traction, and the entire cover is made of plastic material. Each unit of issue is a package containing 150 individual covers, and all items must be marked in compliance with the latest edition of the Medical Marking Standard No. 1, as defined by DLA Troop Support. This is a MEDSEP/MEDSTOCK item with strict sourcing requirements—only the specified part number 6532-01-337-3685 is authorized, and no substitutions or replacements are permitted. The procurement is governed by DLA packaging and technical requirements, with compliance determined by the version of the Master List of Technical and Quality Requirements in effect on the solicitation issue date. The order is for two packages, with delivery required within five days of award, under solicitation SPE2DH-26-T-5428, with performance at Fort Bragg, North Carolina. All inquiries should be directed to Tina Vu at DLA Medical Supply Chain FSH.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

POUCH, LIQUID ABSORBENTThe contract is for the procurement of 1,000 disposable liquid absorbent pouches, each with a capacity of 6.750 ounces and designed to expand upon contact with aqueous solutions such as urine, blood, and other biohazardous fluids. Each pouch measures 4x3 inches and features a heat-sealed, leak-resistant construction with flow-through tissue to enhance absorption. The item is identified by NSN 6530-01-307-7433 and is packaged in a single unit of issue containing 1,000 pouches per package. The solicitation requires bidders to specify the source and part number being supplied, and all supplies must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must adhere to DLA packaging standards, and any non-accepted supplies must have all government identification removed prior to return. The delivery requirement is within 20 days of order placement, with performance location specified as Virginia Beach, Virginia. The solicitation opens on July 23, 2026, and bids are due by July 30, 2026, under contract number SPE2DH-26-T-5457, with point of contact Tina Vu at the Department of Defense, Medical Supply Chain FSH.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

BAG, URINALThe contract is for the purchase of 3 packages of urinal bags, each containing 20 absorbent urinal bags designed to replace traditional plastic urinals while enabling accurate measurement of diuresis and laboratory analysis, suppressing odors, and reducing cleaning requirements. The item, identified by NSN 6530-01-608-6210 and part number 939Y37373, is regulated by the FDA as a Class I medical device and must comply with all applicable marketing requirements including registration, listing, labeling, and GMP standards, even though a 510(k) submission is not required. The product must be marked in accordance with Medical Marking Standard No. 1, superseding all references to MIL-STD-129, and packaged per MIL-STD-2073-1E and DLA packaging requirements, with each unit sealed in a protective container and shipped in commercial exterior packaging suitable for safe transport at the lowest freight rate. Delivery is due within 20 days, FOB destination, to Fort Bragg, North Carolina, with no tolerance for quantity variance. The shipment must be sent via traceable means and not by parcel post. Packaging and labeling must adhere strictly to DLA and medical marking standards, including the inclusion of required government and commercial markings, and palletization must follow RP001 guidelines. The contract falls under solicitation SPE2DH-26-T-5425, issued by the Department of Defense’s Medical Supply Chain FSH, with a required delivery date of July 24, 2026. All technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements apply, and the contractor must ensure full compliance with medical device regulations and marking protocols as outlined in the procurement documentation.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

VALVE, BALL ANLRThe contract is for a single ball valve, ANLR, identified by NSN 6530-01-546-3565 and part number 700321 Rev J from Getinge USA Inc, with a purchase request number 7017596580 and a unit quantity of one. Delivery is required within 20 days to a military destination at FPO AP 96673, shipped FOB destination with no variance allowed in quantity, and inspection and acceptance occur upon arrival. Packaging must comply with commercial standards as specified for medical acquisitions, using sealed unit containers capable of preventing damage, and exterior shipping containers must ensure safe, cost-effective transport by common carrier. All marking must adhere to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and detailed packaging instructions are referenced from DLA’s guidelines. The item is regulated by the FDA as a Class II device requiring a 510(k) along with compliance for registration, labeling, and GMP. Mercury or mercury-containing compounds are prohibited unless specifically exempted, and any portable devices containing mercury must include shockproof design and a secondary containment. Technical and quality requirements are governed by the DLA Master List, with revision control tied to the solicitation or award date. The contracting official must submit an EBS referral to confirm FDA compliance, including manufacturer and item details. The contract is issued under solicitation SPE2DH-26-T-5467, with a response deadline of July 30, 2026, and is managed by the Department of Defense’s Medical Supply Chain FSH.

Alumina Refining and Primary Aluminum Production

POSTED

DEADLINE

POINT, ENDODONTICThe contract specifies the procurement of absorbent paper points for endodontic use, classified as fine grade, with packaging in cell packages containing 40 cells of 5 each, totaling 200 units per package. The unit of issue is one package, and the item is identified by NSN 6520-00-904-1978. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition type. The item is subject to shelf-life requirements stipulating a minimum 48-month shelf life with no extensions allowed, and delivery must occur within seven months of manufacture. Packaging and labeling must comply with MMS1A standards, clearly indicating the date of manufacture, expiration or retest date, and contract or lot number. The item is classified as a TYPE I (CODE R) with controlled shelf-life and requires de-identification of government markings on non-accepted supplies. The solicitation number is SPE2DH-26-T-5447, issued on July 23, 2026, with bids due by July 30, 2026. Delivery must be completed within five days of award to APO, 09898, under the NAICS code 339114, managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu as the point of contact.

Dental Equipment and Supplies Manufacturing

POSTED

DEADLINE

CHIP, TRAININGThe contract pertains to the procurement of a single unit of a simulation training chip designed for use with chip measurement systems, identified by NSN 6630-01-482-4380. The item is classified as an electronic detector tube system with a unit of issue specified as each. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on the acquisition size. The product must comply with DLA packaging standards, including commercial packaging as specified in the procurement document, with each unit sealed in a container that protects against damage and is shipped in exterior containers suitable for safe delivery via common carrier at the lowest cost. All packaging and labeling must conform to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and must clearly display the date of manufacture, expiration or retest date, and the contract number or lot number. The item must have a shelf life of 24 months, with no more than three months having passed from the date of manufacture to the date of delivery to the government, and all shelf life markings must adhere to the latest revision of MMS1C. The acquisition is part of a federal solicitation issued by the Department of Defense under contract number SPE2DH-26-T-5444, with a response deadline of July 30, 2026, and a delivery requirement of five days after order award. The point of contact for the solicitation is Ryan Sullivan of DLA Troop Support.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

CONTAINER, TRANSPORT, THThe contract specifies the procurement of a passive thermal transport container designed for the stable shipment of blood, pharmaceuticals, reagents, and vaccines in field environments. The container must maintain a temperature range of 1 to 10 degrees Celsius for a minimum of 96 hours without the need for ice or external power, and must sustain this temperature for at least 48 hours under any environmental condition. It features a proprietary phase change material and temperature indicator, measures approximately 10x9x10 inches externally and 6x5x6 inches internally, and weighs about 6.8 pounds. The unit is specified to be finished in three-color woodland military camouflage and includes a canvas cover with straps. The item is not regulated by the FDA and must be marked in full compliance with the Medical Marking Standard No. 1, which replaces all references to MIL-STD-129. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with units shipped in sealed, commercial-grade containers suitable for safe transport via common carriers at the lowest cost. Delivery is FOB destination with zero variance allowed, inspection and acceptance occur at the destination, and shipment must be traceable—parcel post is prohibited. The sole supplier identified is PELI BIOTHERMAL LLC with part number PBT01176, and the NSN is 6530-01-505-5301. The contract requires delivery within five days of award, with scheduled delivery dates set for July 24 and July 27, 2026, under solicitation SPE2DH-26-T-5427, and must be shipped to an address in Hurlburt Field, Florida.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

BOX, MICROSCOPE SLIDEThe contract specifies the procurement of a single unit of a plastic hinged-cover box containing 100 microscope slides, each measuring 25mm by 75mm, under NSN 6640-00-408-9915 and part number 03-448-5 supplied by FISHER SCIENTIFIC COMPANY L.L.C. The item is not regulated by the FDA and must be packaged in a sealed unit container that protects against damage or breakage, with exterior shipping containers compliant with commercial standards and capable of safe delivery at the lowest carrier rate to the destination. All packaging and labeling must adhere strictly to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and must conform to DLA’s Master List of Technical and Quality Requirements, which take precedence over ASTM D3951. The material is not hazardous under FED-STD-313 and must be commercially packaged accordingly. The shipment must be sent by traceable means, excluding parcel post, and delivered FOB destination within 20 days of contract award with no tolerance for quantity variance. Delivery is required to Fort Bliss, Texas, and the item must be marked and labeled with the designated government identifiers and traceability codes. The contract mandates full compliance with all DLA packaging, marking, and delivery protocols outlined in RP001 and related technical requirements, and the supplier must specify the contract line item and part number being offered during bid submission.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

BLOCK SET, RADIOGRAPHICThe block set for radiographic positioning is a specialized medical device composed of coated light green stealth-core polyurethane foam with a proprietary medical-grade coating that forms a durable, easy-to-clean skin membrane resistant to blood, Betadine, barium, alcohol, oils, and other fluids. Designed for artifact-free imaging and enhanced stability, each sponge features unique angular designs that optimize patient positioning during diagnostic procedures. The material is infused with antibacterial and antifungal properties, is self-deodorizing, and complies with California Technical Bulletin 117-2013 standards. The surface is finished in a fresh light mint green coating, enhancing visibility and user orientation. The unit of issue is a single set, and bidders must clearly indicate the source and part number being offered. All packaging must adhere to commercial standards as specified in the procurement document, with each unit sealed in a protective container to prevent damage during transit. Shipments must be packed in suitable exterior containers compliant with commercial shipping requirements, ensuring safe and cost-effective delivery to Fort Bliss, Texas, with a delivery deadline of 20 days after award. Items must be labeled in accordance with Medical Marking Standard No. 1, superseding MIL-STD-129, and all necessary labeling information can be obtained via the DLA Troop Support website or contact. The solicitation, identified as SPE2DH-26-T-5482, has a response deadline of July 30, 2026, and is managed by the Department of Defense’s Medical Supply Chain FSH with Tina Vu as the primary point of contact. The NSN for the item is 6525-01-669-8748, and the purchase request number is 7017598048.

Dental Equipment and Supplies Manufacturing

POSTED

DEADLINE

DENTAL INSTRUMENT KIT,The contract specifies the procurement of a sterile, single-use, disposable dental operative kit designed for use in emergency and austere settings such as at sea or remote deployments. The kit contains three essential instruments: one rigid spatula No. 324, one Woodson No. 2 plunger, and one interproximal carver, each intended to support independent dental care professionals in critical situations where access to traditional dental facilities is limited. The unit of issue is a single kit, with a total quantity of one thousand kits requested under purchase request 7017552952 and delivery required within twenty days of award. The specification incorporates mandatory technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition scale. The contract also includes strict prohibitions against the intentional addition of mercury or mercury-containing compounds to the hardware or supplies, with narrow exceptions for mercury used in batteries, fluorescent lights, sensors, controls, weapon systems, and specific chemical reagents as authorized by NAVSEA; any portable fluorescent lamps or instruments containing mercury must be shockproof and feature a secondary containment boundary to prevent leakage. Packaging must comply with DLA requirements, and government identification must be removed from non-accepted items. Bidders are required to provide the source and part number for the supplied kit, which is identified by NSN 6520-01-701-5743. The solicitation, issued under SPE2DH-26-T-5438 by the Department of Defense’s Medical Supply Chain FSH, closes for responses on July 30, 2026, with performance centered at FPO, 96694, and contact for inquiries is Tina Vu at Tina.Vu@dla.mil.

Dental Equipment and Supplies Manufacturing

POSTED

DEADLINE

TRAY, COUNTING, TABLET AThe contract specifies the procurement of two counting trays designed for tablets and capsules, each featuring a mechanism to separate precise doses and return excess pills to their original container, along with an integrated spatula and compatibility with medication vials. All units must be packaged commercially as outlined in the procurement document, with each tray sealed in a protective container to prevent damage or breakage, and shipped in exterior containers suitable for safe transit via common carrier at the lowest possible cost to the designated delivery point. Marking must comply with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and documentation for this standard is available through DLA Troop Support. The equipment is identified by NSN 6530-01-168-8096 and part number 23087, supplied by Apothecary Products, LLC under contract SPE2DH-26-T-5461. Delivery is required within 20 days FOB destination, with no tolerance for quantity variance, and inspection and acceptance occur upon arrival. Packaging must adhere to MIL-STD-2073-1E, and the item falls under NAICS code 339113 for medical device manufacturing, with all technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements applicable as of the solicitation issue date.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

MOULAGE KIT, BLEEDINThe contract is for the procurement of three Moulage Kits, Bleeding Simulation, identified by NSN 6910-01-566-1811, to be delivered within 20 days of award. Each kit is a FEBSS Deluxe Model, designed as a modifiable simulation tool compatible with a wide range of training mannequins or live subjects to accurately replicate trauma-related bleeding. The items must comply with strict labeling and identification mandates, including Item Unique Identification (IUID) per MIL-STD-130 and the DFARS 252.211-7003 clause. Packaging must conform to commercial standards as defined in the DLA procurement document, with each unit sealed in a protective container and shipped in externally robust packaging suitable for safe transport via common carrier at the lowest cost. All items must be marked in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and bidders are required to specify the source and part number of the product being offered. The contract also incorporates technical and quality requirements referenced from the DLA Master List, and covered defense information provisions may apply. The solicitation, issued under SPE2DH-26-T5445 on July 23, 2026, with a response deadline of July 30, 2026, is managed by the Department of Defense’s Medical Supply Chain FSH, with performance to occur at Fort Hood, Texas, and primary point of contact Tina Vu.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE