Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

FITTING, ATTACHMENT,

Active
SPE8EF-26-Q-0144Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the fitting and attachment with NSN 1730-01-111-6877, requiring one unit to be delivered within 60 days of award. It incorporates technical and quality standards referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. The item is subject to Covered Defense Information requirements and must comply with Cybersecurity Maturity Model Certification Level 2, requiring performance by a certified third-party assessment organization. Packaging must adhere to DLA-specific procurement standards, and non-accepted supplies must have government identification removed. Bare items require physical identification marking, and all technical data associated with this item is controlled under ITAR or EAR, restricting export, including disclosure to foreign nationals even within the United States, and mandating compliance with DFARS 252.225-7048. Access to export-controlled technical data is limited to contractors with approved US/Canada Joint Certification Program status, who have completed mandatory DOD export control training and the DLA questionnaire. The solicitation number is SPE8EF-26-Q-0144, with a response deadline of August 5, 2026, and the point of contact is Russell Keiser at the Defense Logistics Agency.

General Info

Deliver one NSN 1730-01-111-6877 unit in 60 days, compliant with CMMC Level 2, ITAR/EAR, and DLA packaging rules.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CONView Agency

NAICS

332996 - Fabricated Pipe and Pipe Fitting ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE8EF-26-Q-0144.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON
View Agency Profile
Office AddressUS
Contacts
Russell Keiser
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
FITTING,ATTACHMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 1730-01-111-6877 Quantity: 1 EA Purchase Request: 7017274368QTY: 1 Delivery: 60 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332996
New
DIBBS
Manufacture of Self-Locking Barrel Nuts (NSN 5310-01-101-0772)The contract requires full-scale production of self-locking barrel nuts classified under NSN 5310-01-101-0772, adhering strictly to military specifications with comprehensive quality control measures throughout the manufacturing process. All units must be manufactured to meet exacting standards for performance, durability, and dimensional accuracy, with full traceability implemented from raw material sourcing to final product shipment. Each batch undergoes rigorous inspection protocols to ensure compliance with applicable military standards, and all finished products must be packaged and labeled in accordance with MIL-STD-129 requirements, including proper identification marking, barcoding, and documentation for military logistics systems. Delivery of the completed goods is to be executed under a subcontract arrangement, with the production facility operating under the oversight of the ASC Commodities Division within the Department of Defense. The solicitation was posted on July 27, 2026, with responses due by August 27, 2026, and performance is expected to support defense supply chain needs without geographic restriction. The NAICS code 332996 confirms the scope as other fabricated metal product manufacturing, indicating specialization in precision mechanical fasteners. Compliance with all contractual requirements, including documentation, labeling, and inspection records, is mandatory for award and payment, with failure to meet standards potentially resulting in rejection of delivery or contract termination.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332996
New
DIBBS
ADAPTER, STRAIGHT, TUThe contract is for the procurement of a Straight Tube to Hose Adapter, part number MS24587-24AA, a critical application item governed by MIL-DTL-5070F Revision F dated 08/23/2024 and MS24587E dated 07/20/2023, with Class 3 threads and aluminum alloy construction. The item is listed on the Qualified Products List and must strictly comply with all technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which override any conflicting specifications. Mercury and mercury-containing compounds are prohibited unless used in exempted functional applications such as batteries, fluorescent lights, sensors, or naval specified reagents, and portable devices containing mercury must include a secondary containment boundary per NAVSEA 5100-003D. The use of Class I ozone-depleting chemicals is strictly forbidden, and any substitute chemicals require prior approval unless explicitly authorized by the technical specification. Packaging must adhere to ASTM D3951 unless superseded by DLA requirements, with all items labeled and marked in accordance with MIL-STD-129, including barcoding and hazardous material disclosures, and palletization must follow RP001. The contract includes two line items totaling 692 units, delivered FOB Origin with a 65-day delivery window, inspection and acceptance occurring at the destination. Delivery is directed to two locations: Tinker AFB, Oklahoma, and Robins AFB, Georgia, with no variance permitted in quantity. The contract imposes mandatory compliance with numerous Federal Acquisition Regulation clauses covering cybersecurity, trafficking, employment eligibility, sustainable products, hazardous materials, export control, electronic invoicing via WAWF, and safeguarding covered defense information. Offerors must provide their Unique Entity Identifier and CAGE Code, represent size and socioeconomic status, and disclose any use of covered telecommunications equipment. The solicitation contemplates an automated, low-price technically acceptable award process, with proposals submitted exclusively through DIBBS by the deadline of July 27, 2026.
FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332996
New
DIBBS
TUBE ASSEMBLY, METALThis contract is for the procurement of a metal tube assembly identified by NSN 4710-00-008-9887 and part number K894805 from Meggitt Defense Systems, Inc., with a quantity of ten units required under solicitation SPE7M4-26-T-288X. The item is classified as a critical application component and must comply with stringent quality standards including ANSI/ISO/ASQ 9001:2015 and AS9100, with tailored requirements limited to specific clauses under sections 8.1, 8.2, 8.4, 8.5, 8.6, and 8.7. The procurement mandates adherence to DLA’s master list of technical and quality requirements, and prohibits the use of Class I ozone-depleting chemicals and any intentional addition of mercury or mercury-containing compounds, except for specific functional applications such as batteries, fluorescent lights, sensors, weapon systems, and designated chemical reagents, which must meet NAVSEA 5100-003D containment standards. Packaging and preservation must follow MIL-STD-2073-1E and MIL-STD-129, with prohibited use of mercury in preservation, packaging, and marking per IP056, and palletization must align with DLA packaging guidelines. The delivery is FOB origin with zero variance allowed, inspection and acceptance occur at destination, and the item must be delivered within 129 days of contract award, with a firm need date of December 15, 2026, and original required delivery by August 19, 2027. All units are to be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, following prescribed transportation protocols, and the contract was posted on July 27, 2026, with responses due by August 7, 2026.
FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332996
New
DIBBS
STRAINER, SEDIMENTThe item specified is a sediment strainer with NSN/part number 4730-01-381-3920, for a quantity of two units, under purchase request 7017440281. Delivery is required within 161 days after order placement. The solicitation is identified by number SPE7M3-26-T-7478, posted on July 14, 2026, with a response deadline of July 27, 2026. The action falls under NAICS code 332996 and is managed by the Fluid Handling Division of the Department of Defense. Performance is located in New Cumberland, Pennsylvania, with William Cain as the primary point of contact via email and phone. The contract is subject to DLA packaging requirements, and the vendor must be a CMMC Level 2 certified third-party assessment organization. Technical data associated with this item is controlled under ITAR or EAR, making unauthorized export—including disclosure to foreign persons in the U.S.—a violation. Access to this data is restricted to contractors with JCP certification, completed DOD export control training, and approval from DLA. DFARS 252.225-7048 governs compliance, and foreign subsidiaries of U.S. companies are equally bound by these restrictions.
FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332996
New
DIBBS
CROSS, TUBEA titanium cross tube with a 1-1/4 inch outer diameter is being procured under solicitation SPE7M3-26-T-7713 for the Department of Defense, specifically for the Fluid Handling Division. The item is designated by NSN 4730-01-254-6154 with a quantity of four units, and delivery is required within 179 days to Tinker Air Force Base, Oklahoma, under FOB origin terms. The contract mandates strict compliance with DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129 marking standards, including the use of Type 1, 2, or 3 Class B or C fabric bags in accordance with MIL-B-117, and palletization must adhere to DLA guidelines. All technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, and the version in effect on the solicitation issue date controls. The item is classified as a critical application item and requires compliance with CMMC Level 2 Cybersecurity Maturity Model Certification through a self-assessment. The tubing ends must be female swaged with grooves, and sizes are specified down to 7/8 inch and 3/4 inch O.D., though the primary item is 1-1/4 inch. The contract is set aside entirely for small businesses and requires no variance in quantity. The purchase price is $4.00 per unit, with total price of $16.00, and delivery must occur by February 3, 2027, as originally required.
FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332996
New
DIBBS
PIPE, METALLICThe contract is for the procurement of 157 feet of metallic pipe identified by NSN 4710-00-277-8703 under solicitation SPE7M4-26-T-266J, with a delivery requirement of 190 days from award. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective at the solicitation issue date controlling for simplified acquisitions and the RFP issue date for larger acquisitions unless amended. The contract incorporates specific requirements including DLA packaging standards, quality conformance inspections, and the mandatory removal of government identification from non-accepted supplies. All delivered supplies must be accompanied by a Certificate of Quality Compliance, with one certificate required per manufacturing lot, prepared in accordance with the Supplemental Quality Assurance Provision. Suppliers must make the COQC available for Government review at source and upload an electronic copy to the iRAPT system as an attachment to the Receiving Report for official record retention. The Government may authorize acceptance via WAWF upon compliance with COQC submission requirements. The place of performance is New Cumberland, Pennsylvania, with the point of contact being Rory O’Reilly of the Fluid Handling Division of the Department of Defense, and the NAICS code for the procurement is 332996.
FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332996
New
DIBBS
FLANGE, PIPEThe contract is for the procurement of 165 units of a 2-inch nominal pipe flange made of bronze material, rated at 150 lb. class, with bolt holes arranged on a 4-3/4 inch bolt hole circle, intended for naval applications. Each flange must be manufactured with silver-brazing alloy rings conforming to QQ-B-654 Grade III, which are to be packaged separately and not inserted into the flange groove. The product must strictly comply with all applicable technical and quality requirements from the DLA Master List, and no mercury or mercury-containing compounds are permitted in the product, its preservation, packaging, packing, or marking, except for certain exempted applications such as batteries, sensors, or instruments specified by NAVSEA; portable instruments containing mercury must include a secondary containment boundary. Ozone-depleting chemicals are prohibited, and all substitute chemicals must be submitted for approval unless explicitly authorized. The flange is identified by NSN 4730-00-252-3508 and part number CS4730-0024-2IN, and production must follow revision E of the detailed drawing dated 09/21/1982. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with preservation performed using dry methods, no preservation materials, and clean, dry conditions; packaging code U indicates unit packaging, and no special marking is required. Palletization must follow DLA Packaging Requirements RP001, and the delivery must be FOB origin with a requirement to deliver within 123 days after the delivery order, with a target delivery date of November 7, 2025. Inspection and acceptance occur at the destination, with sampling governed by MIL-STD-1916 or equivalent zero-based sampling plans requiring zero non-conformances unless otherwise specified. The contract mandates WAWF for invoicing and is subject to a range of Federal Acquisition Regulation clauses including those on hazardous materials identification, employment eligibility, trafficking in persons, sustainable products, and compliance with NIST SP 800-171 for cybersecurity. The contractor must maintain current UEI and CAGE codes, and if claiming small business status, must provide accurate socioeconomic certifications. Delivery is to the DLA Distribution facility in New Cumberland, PA, and full and open competition applies with no set-aside designation.
FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332996
New
DIBBS
ADAPTER, STRAIGHT, TUBEThe contract is for the procurement of aluminum alloy straight tube-to-hose adapters identified by NSN 4730008421139, with a nominal tube outside diameter of 0.875 inches and compatible with 1.000-inch nominal hose ID. The item is classified as a commercial item and must comply with technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers. Performance must adhere to the basic specification MS24587E and reference specification MIL-DTL-5070F Supplement 1, with critical application status requiring strict adherence to quality standards. The item is subject to stringent environmental and safety controls: mercury or mercury-containing compounds are prohibited unless explicitly exempted for batteries, fluorescent lights, sensors, weapon systems, or NAVSEA-specified reagents; portable mercury-containing devices must have shock-proof design and a secondary containment barrier as per NAVSEA 5100-003D. Ozone-depleting chemicals are banned outright, and substitute chemicals require prior approval. The adapter must use Class 3 threads and be manufactured and packaged per MIL-STD-2073-1E with preservation method 31 (clean and dry), heat-sealed barrier bags, and palletization in accordance with DLA’s RP001 packaging requirements. Marking must follow MIL-STD-129 with special marking code 24 indicating the item is open for inspection or use. Delivery is FOB origin with no quantity variance permitted, inspection and acceptance occur at destination, and items must be delivered within 165 days of award. Two contract line items exist—18 units to Robins AFB, GA, and 101 units to Tinker AFB, OK—with original delivery dates of June 3, 2027, and need ship dates of January 9, 2027, and October 9, 2027. The solicitation requires electronic submission via DIBBS by July 27, 2026, and obligates the contractor to comply with numerous FAR and DFARS clauses including those on equitable opportunity, trafficking in persons, employment eligibility verification, hazardous materials handling, cybersecurity (NIST SP 800-171), safeguarding defense information, prohibitions on covered telecommunications equipment, whistle-blower rights, and use of the Unique Entity Identifier and CAGE code for
FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332996
New
DIBBS
PLUG, WATER INLET FIThe contract pertains to the procurement of two PLUG, WATER INLET FITTING units with NSN 4730-00-928-6499 under solicitation SPE7M3-26-T-7518, issued by the Defense Logistics Agency’s Fluid Handling Division. Delivery is required within 308 days after award, and responses are due by July 27, 2026. The item is subject to strict export control under either ITAR or EAR, prohibiting any transfer of associated technical data to foreign persons, whether inside or outside the U.S., without prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled data, and access is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA authorization. Cybersecurity requirements mandate that the vendor must be certified by a CMMC Level 2 Certified Third-Party Assessment Organization. The place of performance is in Tracy, California, with William Cain listed as the primary point of contact for inquiries.
FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332996
New
DIBBS
ELBOW, PIPE TO HOSE
FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332996
New
DIBBS
COUPLING HALF, QUICK DI
MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332996
New
DIBBS
ELBOW, HOSE
FLUID HANDLING DIVISION

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

Same awarding agency

NAICS: 332710
New
DIBBS
YOKE ASSYY, LOADERThe contract pertains to the procurement of seven yoke assemblies for a loader, identified by NSN 1730-01-455-9629 and part number 9383309-1, under solicitation SPE8EF-26-Q-0150. The item is classified as a critical application item and must adhere to Technical Data Package Rev B Gen 3 referenced against multiple drawings with specified revisions and dates. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size, and any amendments take precedence. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and unidentified attributes are treated as major. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization in accordance with DLA Packaging Requirements RP001, while the DLA Master List supersedes any conflicting standards. The delivery is firm fixed price with no variance allowed, and the item must be delivered within 60 days of the award date to the designated DLA distribution facility in New Cumberland, Pennsylvania. Inspection and acceptance occur at destination, and all packaging and labeling must meet required military standards. The contract also identifies potential application of Covered Defense Information and mandates adherence to specific transportation protocols outlined in DLAD Proc Notes C19 and C20.
Machine Shops

POSTED

about 19 hours ago

DEADLINE

in 9 days
View Details
NAICS: 333922
New
DIBBS
ACTUATOR, ELECTRO-METhe contract pertains to the procurement of six electro-mechanical actuators, identified by NSN 3910-01-724-7721 and manufacturer part number DG-012203-04 from DRS Naval Power Systems Inc, under solicitation SPE8EF-26-T-0915. Delivery is required within 168 days of contract award, with shipment occurring FOB origin and inspection and acceptance taking place at the destination warehouse in Tracy, California. The unit of issue is each, with a fixed quantity of six units and no variance allowed. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must adhere to MIL-STD-129 and DLA Packaging Requirements, including palletization as specified. The product is designated as a critical application item, and covered defense information may apply. The shipment must be delivered to the designated receiving warehouse by September 29, 2026, with the original required delivery date set for December 26, 2026. Transportation and shipping instructions follow DLAD procedural notes C19 and C20. The contract price is $6.00 per unit, totaling $36.00. All documentation, labeling, and packaging must reflect the specified unit of issue and quantity per unit pack as stated in the contract, and the point of contact for inquiries is Russell Keiser with the Department of Defense.
Conveyor and Conveying Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332312
New
DIBBS
NON-NSN ITEMThis contract specifies the procurement of 10 units of commercial hardware identified by CAGE code 7Z049 and part number H-7854, supplied by ULINE INC based in Pleasant Prairie, Wisconsin. The unit price is $10.00 per item, resulting in a total contract value of $100.00, with no variance allowed in quantity—exactly 10 units must be delivered. Delivery is required within 10 days of contract issuance, with FOB destination terms meaning the supplier bears all transportation risks and costs until the goods reach the final delivery point. Inspection and acceptance occur at the destination, which is Camp Carroll, Building 505, Waegwan, South Korea, under the military shipping address WT4KEA W0C3 USAMSC-K SP60. Packaging must fully comply with ASTM D3951 and MIL-STD-129 marking standards, with palletization adhering to DLA’s RP001 requirements, ensuring the Unit of Issue and Quantity per Unit Pack are strictly followed. The item is to be shipped per DLAD PROC NOTE C19 and C20, and must be labeled and delivered as directed to the government-designated recipient. The required delivery date is May 11, 2026, and the procurement is under solicitation SPE8EE-26-T-2178, with the contracting officer contact listed as Philip Ferrara. All deliveries must meet DLA’s Master List of Technical and Quality Requirements, which override any general industry standards.
Fabricated Structural Metal Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
New
DIBBS
SPINDLE, WHEELThe contract pertains to the procurement of 19 rear wheel spindles with NSN 1730-00-568-0653 under solicitation SPE8EF-26-Q-0146, issued by the Defense Logistics Agency. Delivery is required within 60 days of award, and the solicitation closure date is August 6, 2026. The technical and quality requirements governing this procurement are defined by the DLA Master List of Technical and Quality Requirements, with applicability determined by the acquisition type and relevant document revision dates. This item is subject to stringent export control regulations under ITAR or EAR, prohibiting unauthorized disclosure or transfer of associated technical data to foreign persons, regardless of location. Access to this controlled data is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program credential, have completed mandatory DOD export control training, and have been formally approved by DLA. Additional compliance requirements include adherence to DLA packaging standards, removal of government identification from non-accepted supplies, physical marking of bare items, and the handling of covered defense information. The contract is classified as a federal solicitation with no set-aside designation and is managed by the Department of Defense’s Construction & Equipment Manufacture and Construction organization.

POSTED

about 19 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332994
New
DIBBS
PAD, HOIST ADAPTER, GThe contract pertains to the procurement of three PAD, HOIST ADAPTER units with the NSN 1730-01-129-3576 under solicitation SPE8EF-26-Q-0148, with a delivery requirement of 60 days after award. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The item is subject to export control under ITAR or EAR, prohibiting any disclosure or transfer of associated technical data to foreign persons without prior authorization from the Department of State or Commerce, including foreign national employees and subsidiaries; DFARS 252.225-7048 applies. Only DLA contractors with approved US/Canada Joint Certification Program status, completion of DOD export-controlled data training, and successful review of the DLA Export-Controlled Technical Data Questionnaire are permitted access to this data. Additional requirements include compliance with DLA packaging standards, removal of government identification from non-accepted supplies, physical marking of bare items, and adherence to Cybersecurity Maturity Model Certification Level 2 standards through a certified third-party assessment organization. Covered defense information requirements are in effect, and the point of contact for inquiries is Russell Keiser with the Department of Defense, Construction & Equipment Manu & Con.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
New
DIBBS
ROLLER, CONVEYORThe contract pertains to the procurement of one unit of a roller conveyor, identified by NSN 3910-01-653-9991 and part number 86312-14, under solicitation SPE8EF-26-Q-0139. The item is classified as a critical application item and is subject to stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, including specific mandates for cybersecurity maturity under CMMC Level 2 self-assessment, FAA bare item marking, and supply chain traceability per DLAD Procurement Note C03. Packaging and preservation must comply with MIL-STD-2073-1E, MIL-STD-129 for marking, and DLA Packaging Requirements, with no special marking required and palletization following RP001 standards. Inspection and acceptance occur at destination under a firm fixed price with zero variance tolerance, and delivery is due 60 days after award. The item must also meet FAA airworthiness approval requirements and incorporate covered defense information protocols. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The contract specifies the government’s delivery and freight destination as Tracy, California, with the technical data package referencing drawing number 14153 RE-016539991 and CDRL FAACERTCOM-25015. The unit of issue is EA, pricing is fixed, and the contractor must retain full supply chain documentation as mandated.

POSTED

about 19 hours ago

DEADLINE

in 8 days
View Details
New
DIBBS
ADJUSTMENT ASSEMBLY, TRThe contract pertains to the procurement of five Adjustment Assembly, Traverse units with NSN 1730-00-568-0621 under solicitation SPE8EF-26-Q-0116, with a delivery requirement of 90 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with revisions in effect on the solicitation issue date controlling for simplified acquisitions and the RFP issue date for large acquisitions unless amended. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes deemed major. Manufacturing may involve casting or forging, and contractors seeking tooling or material support must submit a request via the designated DLA portal or email. The item is subject to export control under ITAR or EAR, restricting technical data disclosure to foreign persons regardless of location, and access is limited to contractors with JCP certification, completed DLA training, and formal approval. Identification marking must comply with MIL-STD-130N, and a Certificate of Conformance is required. Drawings are available only during the open solicitation period via the DIBBS portal, and covered defense information applies under the contract. The point of contact for inquiries is Russell Keiser, with the solicitation open until August 5, 2026.

POSTED

about 19 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
ADAPTER, BOMB SKID
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332312
New
DIBBS
NON-NSN ITEM
Fabricated Structural Metal Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336413
New
DIBBS
TOWBAR, AIRCRAFT
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details
New
DIBBS
BLOCK ASSEMBLY, PUMP AN

POSTED

about 19 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
COLLAR, BRACE, AIRCRA
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 10 days
View Details