Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

FITTING, CARRIAGE, IN

Active
SPE4A7-26-T-585VFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of three Fitting, Carriage, IN units, manufactured via a forging process requiring specialized tooling. The item is identified by NSN 1560-00-602-4422 and is part of a Women-Owned Small Business Set-Aside solicitation under DLA contract number SPE4A7-26-T-585V, with a response deadline of July 29, 2026, and a delivery requirement of 171 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with configuration control, inspection at origin, and supplier qualification governed by established DLA protocols including Qualified Products and Manufacturers Lists. Export-controlled technical data associated with this item falls under ITAR or EAR regulations, restricting disclosure to foreign persons without prior authorization and limiting access to contractors with approved US/Canada Joint Certification Program status, completed DLA training, and formal authorization. Item Unique Identification is waived per customer request. Packaging, cybersecurity certification at CMMC Level 2, and documentation for source approval submissions are mandatory. Performance is designated at Tinker AFB, Oklahoma, and all bidders must comply with DLA’s documentation and supply chain protocols, including the handling of covered defense information and adherence to engineering change management procedures.

General Info

Procure three forged Fitting, Carriage, IN units under DLA contract SPE4A7-26-T-585V, delivery in 171 days, CMMC Level 2, ITAR/EAR controlled.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, US

Set-Aside

WOSB

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Rahsaan Deloney
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
FITTING,CARRIAGE,IN
FITTING, CARRIAGE, IN
A forging process was identified as a means to manufacture this item. Tooling is required to produce a forging. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C<(>&<)>E Supply Chains) https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil. RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
ENGINEERINING NOTES/EXCEPTIONS LOADED UNDER DWG# EI-006024422
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ016: COMPONENT QUALIFIED PRODUCTS LISTS (QPL)/QUALIFIED MANUFACTURERS
LISTS (QML). THIS ITEM CONTAINS ONE OR MORE COMPONENTS DEFINED BY A
SPECIFICATION(S) WITH AN ASSOCIATED QUALIFIED PRODUCTS LIST (QPL) OR
QUALIFIED MANUFACTURERS LIST (QML). QUALIFICATION REQUIREMENTS IN
PROCUREMENT NOTE H02 "COMPONENT QUALIFIED PRODUCTS LIST (QPL)/QUALIFIED
MANUFACTURERS LIST (QML)" APPLY.
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to
SPE4A7-26-T-585V
SECTION B
export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 1560-00-602-4422 Quantity: 3 EA Purchase Request: 7017572092QTY: 3 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
ARM, EMERGENCY ESCAPEThe contract pertains to the procurement of 20 units of an ARM, EMERGENCY ESCAPE item identified by NSN 1560-00-333-6710, with a delivery requirement of 171 days after award. Manufacturing must be accomplished via a forging process, necessitating specialized tooling, and sourcing inquiries for tooling, materials, or production support must be directed to designated DLA supply chain teams based on application domain—Aviation or Land & Maritime. The item is subject to stringent quality standards under SAE AS9100, along with specific packaging requirements per RP001 and strict compliance for measuring and test equipment under RT001. Documentation for source approval must adhere to RC001, and physical identification and bare item marking must comply with RQ017. The technical data associated with this item is controlled under ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior government authorization, and only DLA contractors with approved JCP certification, completed training, and DLA authorization may access the data. Cybersecurity compliance at CMMC Level 2 is required through a certified third-party assessment organization under RD005. The solicitation number is SPE4A7-26-T-584L, with a response deadline of July 29, 2026, and the performance location is Tinker AFB, Oklahoma. Primary point of contact is Mahlon Marcus at the Defense Logistics Agency.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
SUPPORT, STRUCTURAL COMThis contract, issued under solicitation SPE4A6-26-T-08PJ, is for the procurement of four units of a structural component for aircraft, identified by NSN 1560016894017 and part number 70500-02070-158, supplied by SIKORSKY AIRCRAFT CORPORATION (CAGE 78286). The item is classified as a critical application component and is subject to stringent technical and quality requirements mandated by the DLA Master List of Technical and Quality Requirements, which supersede commercial standards such as ASTM D3951. Packaging must comply with DLA Directive RP001 and MIL-STD-129, with hazardous materials adhering to FED-STD-313 and IP025, while non-hazardous items must meet DLA’s packaging standards. Supply chain traceability documentation must be retained by the contractor per DLAD Procurement Note C03, though item unique identification is not required per customer preference. Delivery is set for 171 days after contract award, with FOB origin terms and inspection and acceptance occurring at the destination, DLA Distribution Jacksonville. The contract enforces zero variance in quantity and mandates compliance with SIKORSKY’s approved sampling plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. A Certificate of Conformance is authorized unless overridden by a quality assurance letter. The supplier must also complete a CMMC Level 2 self-assessment to meet cybersecurity requirements. All shipments must be palletized per DLA guidelines and addressed to the specified logistics point with the designated point of contact, Tyana Anderson. The original required delivery date is August 15, 2027, with a need ship date of January 17, 2027, and the contract is governed by the technical and administrative controls applicable to Department of Defense procurements.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
FITTING, BREAKAWAYThe contract pertains to the procurement of 12 units of a breakaway fitting identified by NSN 1560-01-148-1719 under solicitation SPE4A5-26-T-299Y, with a delivery deadline of 171 days after award. The acquisition is structured as a total small business set-aside under NAICS code 336413, managed by the Department of Defense through the ASC Supplier Operations OEM Division. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or award date for simplified acquisitions. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. Physical identification of the bare item is required, but item unique identification is explicitly not required per the service customer’s directive. Measuring and test equipment must meet specified standards, and documentation for source approval is mandatory. The place of performance is New Cumberland, Pennsylvania, with Kirstie Ragsdale as the primary point of contact. The solicitation was posted on July 21, 2026, with responses due by July 29, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
BRACKET, LIGHT RETENThe contract pertains to the procurement of 40 units and 140 units of a light retention bracket, identified by NSN 6220-01-631-4413 and part number 2614833C1, under solicitation SPE8E7-26-T-3370. Delivery is required within five days of shipment, with FOB origin terms, and no quantity variance is permitted. Inspection and acceptance occur at the destination, with all packaging and labeling strictly governed by MIL-STD-129 and DLA’s Master List of Technical and Quality Requirements, which override ASTM D3951, while hazardous materials must comply with TQ requirement IP025 per FED-STD-313. Palletization must adhere to RP001 DLA Packaging Requirements, and each unit pack must contain exactly one item. The items are to be delivered to the U.S. Army SSA W58MKR in Zaczernie, Poland, with shipment tracked via RDD E and referenced DLA procedural notes. The first delivery is due by July 21, 2026, and the second by July 22, 2026, with unit prices of $40.00 and $140.00 respectively, totaling $2,000 and $19,600. The contract references mandatory technical and quality standards from the DLA Master List accessible online, and all documentation and unit of issue compliance must align with DoD standards as defined in official DLA resources.
Defense Logistics Agency

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
CYLINDER ASSEMBLY, AThe contract is for one cylinder assembly, actuating, linear, with part number 1FA10038-1 and NSN 1650-01-388-4903, sourced from Triumph Actuation Systems LLC, CAGE 26437. The item is classified as a critical application requiring strict adherence to DLA’s Master List of Technical and Quality Requirements, which take precedence over all other standards. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization governed by RP001, and all markings and labeling must follow military specifications. Zero defect acceptance is mandated under MIL-Std-1916 or a comparable zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. No unit identification is required per customer request, and deviation or waiver requests must follow formal configuration change management procedures. Delivery is FOB origin, with inspection and acceptance occurring at destination, and the single unit must be delivered within 171 days from the contract date to the specified receiving warehouse in Tracy, California. The original required delivery date is March 4, 2027, with a needed ship date of January 17, 2027. Pricing is fixed at $1.00 per unit, and no quantity variance is permitted. The solicitation number is SPE4A7-26-T-584S, issued under NAICS 336413, with contractual obligations binding to the DLA Master List revisions effective as of the solicitation issue date.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
WEIGHT, WHEEL BALANCThe contract pertains to the procurement of Wheel Balancing Weights, identified by NSN 1630-01-281-8724 and part number 2609689 from Honeywell International Inc., with a quantity of 265 units. It is classified as a commercial item and must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards. Technical and quality specifications referenced by R or I numbers are governed by the DLA Master List revision in effect on the solicitation issue date, and all inspections must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified. Critical attributes are subject to verification level VII, major to IV, and minor to II, with AQLs of 0.1, 1.0, and 4.0 respectively. The item is designated as a critical application item, and though Unique Item Identification is not required, physical marking per RQ017 is mandatory. Delivery is FOB origin with a 171-day lead time, and acceptance is at destination. Packaging must adhere to MIL-STD-129 and either FED-STD-313 for hazardous materials or ASTM D3951 for non-hazardous, with palletization in compliance with DLA Packaging Requirements. The required delivery date is March 2, 2027, with a ship date of January 17, 2027. All shipments must be sent to the DLA San Joaquin receiving warehouse in Tracy, CA, and transportation procedures must follow DLAD Proc Notes C19 and C20. Cybersecurity compliance requires a CMMC Level 2 Self-Assessment, and covered defense information is subject to strict handling protocols. The contract is managed by the Department of Defense under solicitation number SPE4A5-26-T-300F, with Dominique Howard as the primary point of contact.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
FAN, CENTRIFUGALThis contract is for the procurement of 31 centrifugal fans, identified by NSN 1660-01-571-5624 and part number R4-L2R-20AC-GP, under solicitation SPE4A7-26-T-584Z. The items must comply with all applicable DLA Master List of Technical and Quality Requirements, which take precedence over any other standards including ASTM D3951 for packaging. Packaging and labeling must adhere strictly to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and unit packaging as specified. Inspection and acceptance occur at the destination, and no quantity variance is permitted. Delivery is required within 171 days from the contract date, with the original delivery deadline set for June 6, 2027, and the need ship date of January 17, 2027. The product must be delivered FOB origin to the specified warehouse at Tracy, California, with transportation governed by DLAD Proc Notes C19 and C20. The contract enforces strict quality control under MIL-STD-1916 or equivalent zero-based sampling plans, with attributes classified as critical, major, or minor assigned verification levels or AQLs accordingly, and non-conformances not permitted unless specifically allowed. Cybersecurity requirements mandate a CMMC Level 2 self-assessment, and all government identification must be removed from non-accepted supplies. The unit of issue is each, priced at $31.00 per unit, for a total contract value of $961. Compliance with DoD authorized units of issue and ANSI X12 equivalency is required. The contract is managed by the Department of Defense under the ASC Supplier Oper AE and AF Division, with Amber Wells as the primary point of contact. All technical and quality criteria referenced by R or I numbers are incorporated by reference from the DLA Master List, and the version in effect on the solicitation issue date controls compliance.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
WIRE ROPE ASSEMBLY, SINThis contract is for the procurement of a single-leg wire rope assembly, identified by part number 35-12055-36 and NSN 4010-00-775-3323, with a quantity of 13 units required under solicitation SPE4A5-26-T-299K. The item is designated as a critical application item for The Boeing Company and must comply with all applicable technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over other standards. The procurement mandates adherence to stringent packaging directives under ASTM D3951 and MIL-STD-129, with palletization following DLA Packaging Requirements for Procurement. The unit of issue is each, with no variance allowed in quantity. Delivery is FOB origin with inspection and acceptance occurring at destination, and the required delivery window is 171 days from the contract award, with a need ship date of January 17, 2027, and an original delivery deadline of July 15, 2028. Cybersecurity compliance is mandated at CMMC Level 2 through self-assessment, and source approval documentation must be provided. Item Unique Identification is not required per customer request, and any non-accepted supplies must have government identification removed. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances permitted unless otherwise specified, and all measuring and test equipment must be properly calibrated. All shipments must be sent to the designated DLA Distribution facility in New Cumberland, Pennsylvania, and transportation logistics are governed by specific DLA procedural notes.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
HEADREST, SEAT, AIRCRIPECO HOLDINGS LIMITED, with CAGE code K9075, is contracted to supply four headrest units, part number 0A066-0049AJ, for use in aircraft seating systems under solicitation SPE4A7-26-T-587D. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, incorporating specific controls identified by R and I numbers, with packaging, inspection, and quality assurance governed by MIL-STD-129, ASTM D3951, and RP001 DLA Packaging Requirements, all of which override general industry standards. Acceptance must occur at origin with zero nonconformances expected under the zero-based sampling rules of MIL-STD-1916 or ASQ H1331, and all attributes are to be classified with verification levels or AQLs as defined, unless otherwise specified. Unit of issue is each (EA), with no tolerance for quantity variance, and delivery is FOB origin with a required delivery date of February 8, 2027, and a need ship date of January 17, 2027, giving a 171-day lead time. The item is identified by NSN 1680-99-290-6224, and although Item Unique Identification is not required per customer request, all packaging and marking must comply fully with DLA directives. The sole delivery point is DLA Distribution Warner Robins, Building 376, Robins AFB, Georgia, and the procurement is subject to all applicable DLA procedural notes for transportation and freight.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
ADAPTER, PRESSURE FUThe contract is for a single unit of a critical application pressure adapter with NSN 1680-01-523-8100 and part number 15238100, manufactured by DUDLIK INDUSTRIES INC. with CAGE code 6T658. The item is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with specific mandates for documentation, packaging, inspection, and marking per MIL-STD standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Inspection and acceptance occur at origin, and the supplier must comply with tailored higher-level quality requirements, CMMC Level 2 self-assessment, and zero-defect sampling under MIL-STD-1916 or equivalent standards unless otherwise specified. A First Article Test is required, and a Follow-On Inspection Test (FIT) must be conducted at a location to be provided by the Contracting Officer after review of the First Article Test Report; if the First Article Test is waived, the supplier must notify the Contracting Officer 14 days prior to shipment to arrange the FIT. The item is not required to be uniquely identified per DFARS 252.211-7003(c)(1)(i), and all packaging and palletization must adhere to DLA-specific packaging requirements. Delivery is FOB origin with a 171-day allowable delivery window, a required ship date of January 17, 2027, and the final delivery destination is the DLA Distribution San Joaquin facility in Tracy, California. The contract enforces a 0% quantity variance and identifies the item as a critical application component, requiring full compliance with all referenced specifications and revisions in effect at the time of award.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
RESISTOR, THERMALThis contract specifies the procurement of a thermal resistor with part number 2215993-1 and NSN 5905-01-495-3705, quantity of four units, under solicitation SPE4A5-26-T-298L. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which is incorporated by reference and controls compliance based on the solicitation or award date depending on acquisition size. The item is classified as a critical application component and must adhere to stringent packaging standards per MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. Packaging must comply with DLA’s specific procurement requirements including palletization and unit containment protocols. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under a zero-based sampling plan, and the manufacturer may choose between attribute or variable inspection methods under MIL-STD-1916 unless otherwise directed. The item must also meet Non-Tailored Higher-Level Quality Requirements per SAE AS9100 and includes compliance obligations under Cybersecurity Maturity Model Certification Level 2 via self-assessment. Delivery is FOB origin with a required delivery date of November 15, 2027, and a need ship date of January 17, 2027, to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with a strict quantity variance of plus or minus zero percent.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
SUPPORT, STRUCTURALThe contract pertains to the procurement of a structural aircraft component identified by part number 70219-04203-067 and NSN 1560016184305, with a quantity of ten units to be delivered FOB origin within 171 days of the contract award, targeting a delivery date of January 17, 2027, and an original required delivery date of February 6, 2028. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with precedence over commercial standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and DLA Packaging Requirements for Procurement (RP001), with hazardous materials subject to FED-STD-313 and IP025, while non-hazardous items require commercial packaging under DLA’s directives. Supply chain traceability documentation must be retained per DLA Directive Procurement Note C03 from August 2016, and physical identification marking is required per RQ017, though item unique identification is waived by the service customer under DFARS 252.211-7003(c)(1)(i). Cybersecurity compliance is mandated at CMMC Level 2 through self-assessment, and certification of conformance procedures under FAR 52.246-15 are authorized unless overridden by a quality assurance letter. Sampling follows Sikorsky Corporation’s alternate plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. Inspection and acceptance occur at the destination, with no quantity variance permitted. The contract is issued under solicitation SPE4A1-26-T-2472, with delivery addressed to DLA Distribution San Diego, and transportation logistics guided by DLAD Procurement Notes C19 and C20.
AVIATION SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 541512
New
DIBBS
Cybersecurity Compliance & CMMC SupportThe contract seeks subcontractor support to achieve and maintain cybersecurity compliance with NIST SP 800-171 standards and prepare for CMMC certification, specifically for entities handling controlled unclassified information. Services include developing and maintaining comprehensive System Security Plans, implementing required security controls, and completing SPRS attestation to demonstrate compliance posture. All activities must align with Department of Defense requirements and are targeted at ensuring readiness for third-party audits and contractual obligations under CMMC frameworks. The work is to be performed in support of the ASC SUPPLIER OPER AE AND AF DIV under the broader DoD acquisition structure. This subcontract opportunity is open for response until August 20, 2026, and is classified under NAICS code 541512 for computer systems design services. There is no set-aside designation specified, and performance location details are not provided, but the work is expected to support DoD supply chain security initiatives. Interested parties must navigate the DIBBS platform via the provided link to access full solicitation details and submit proposals ahead of the deadline. The contractor is expected to deliver documented, auditable processes and artifacts that validate ongoing compliance and readiness for CMMC level assessment.
Computer Systems Design Services

POSTED

about 13 hours ago

DEADLINE

in 29 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Preservation & Marking ServicesThe contract seeks subcontractor services for the military-compliant packaging, preservation, and labeling of viewer mounts in accordance with MIL-STD-129, MIL-STD-2073-1, and DLA RP001 standards, ensuring all requirements for defense logistics and shipment readiness are met. The work must adhere strictly to federal military specifications governing labeling, containerization, corrosion prevention, and documentation to support secure and traceable delivery across the defense supply chain. The solicitation is issued under NAICS code 493190 for other warehousing and storage and is classified as a subcontract, with a response deadline of August 20, 2026. The contracting activity originates from the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense, with performance expected to align with DoD logistics protocols. All submissions must comply with the technical and procedural mandates of the referenced military standards and be submitted via the DIBBS portal by the specified deadline.
Other Warehousing and Storage

POSTED

about 13 hours ago

DEADLINE

in 29 days
View Details
NAICS: 541330
New
DIBBS
Quality Assurance & First Article Testing (FAT) ServicesThe contract seeks independent verification and documentation of First Article Testing compliance to ensure that production processes and initial samples meet specified technical and quality requirements. This includes comprehensive inspection planning, execution of sample testing according to approved procedures, and the generation of a formal First Article Test report that validates conformance to contract specifications. The work is critical for validating manufacturing readiness and ensuring consistency before full-scale production begins, with all activities requiring strict adherence to established quality assurance protocols. This is a subcontract under the NAICS code 541330, relating to engineering services, and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation is open for responses until August 20, 2026, and performance will be carried out in alignment with defense-specific quality standards. While no specific location or set-aside details are provided, the nature of the work indicates a focus on supply chain assurance for defense-related components, requiring qualified vendors with demonstrated expertise in aerospace or defense manufacturing compliance and formal reporting processes.
Engineering Services

POSTED

about 13 hours ago

DEADLINE

in 29 days
View Details
NAICS: 332994
New
DIBBS
Precision Machining of Viewer Mount ComponentsThe contract involves the manufacture of precision-turned metal components for a military viewer mount, requiring advanced CNC machining, surface finishing, and rigorous quality inspection adhering to MIL-STD-810G environmental testing standards and First Article Testing protocols. All work must meet exacting military specifications for durability, dimensional accuracy, and performance under extreme operational conditions. The subcontract is classified under NAICS code 332994 and is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with responses due by August 20, 2026. The components are intended for critical defense applications where reliability and compliance are non-negotiable, and all produced parts must undergo documented inspection and certification before delivery.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 29 days
View Details
NAICS: 334290
New
DIBBS
COVER, ELECTRONIC COMMUThis contract is for the procurement of a cover for electronic communication equipment, identified by NSN 5895012703108 and part number 13075913-019, with a quantity of 10 units. The item is classified as a Critical Application Item and must comply with strict technical and quality standards as defined in the DLA Master List of Technical and Quality Requirements, referenced through R and I numbers in the document. The use of ozone-depleting substances in any phase of design, manufacturing, or testing is strictly prohibited without written approval from the Contracting Officer, though this restriction does not apply to commercial items or part-numbered-only components. Packaging must adhere to MIL-STD-2073-1E with specific procedures for preservation, wrapping, and unit containment, and all markings must follow MIL-STD-129 without special marking codes. The product must be palletized according to DLA packaging requirements and delivered FOB origin to the designated delivery point at the DLA Distribution New Cumberland Facility in Pennsylvania. Delivery is required within 171 days from the contract date, with an original required delivery date of November 28, 2026, and a needed ship date of January 17, 2027. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances during sampling, which must follow MIL-STD-1916 or a comparable zero-based sampling plan. Attributes are assigned verification levels and AQLs as specified, with unspecified attributes treated as major. The contract enforces strict configuration change management and prohibits deviations without formal engineering change proposals or variance requests. The unit of issue is each, with no permitted quantity variance. Transportation and shipping details are governed by DLA procedural notes, and all documentation references point to official DLA and DoD systems for compliance. The solicitation number is SPE4A7-26-T-587A, with a response deadline of July 29, 2026, and the contracting officer is Tamera Greene of the Department of Defense.
Other Communications Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
GAGE, PRESSURE, DIALThis contract specifies the procurement of a dial indicating pressure gage identified by part number SG4ND1HPWRANAG and NSN 6685012983789, with a quantity of 61 units to be delivered FOB origin within 315 days. The item is classified as a commercial item and is designated as a critical application item, requiring strict adherence to technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the solicitation or award date. Manufacturing and delivery must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, including special marking code 05 for delicate instrument handling, and palletization in accordance with DLA packaging guidelines. Unit of issue is each, with no variance allowed in quantity, and inspection and acceptance occur at origin. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the item or its components, with exceptions permitted only for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA; portable devices containing mercury must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Sampling for inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances required unless otherwise specified, and attributes are to be verified at predefined levels. Physical identification of the bare item must meet RQ017 requirements, and government identification must be removed from non-accepted supplies per RQ011. The contract includes a CDRL, and all technical data must conform to referenced specifications including MIL-G-18997E and DI-DRPR-80651. The solicitation is a total small business set-aside under NAICS code 334519, with point of contact information provided for inquiries.
Other Measuring and Controlling Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 314910
New
DIBBS
PARTICLE SEPARATOR,The Contract involves the procurement of a single unit of a Particle Separator with NSN 1680-01-524-7206 under solicitation SPE4A7-26-T-584W, with a delivery deadline 171 days after award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The supplier must comply with DLA packaging standards, tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers, and inspection and acceptance at origin. The item is exempt from Item Unique Identification per the Service customer’s request, and government identification must be removed from non-accepted supplies. Export control applies to associated technical data under ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior authorization, including to foreign nationals within the U.S., and requiring compliance with DFARS 252.225-7048. Access to controlled technical data is restricted to contractors with approved JCP certification, completed DOD export training, and DLA authorization. Covered defense information applies, and all documentation requirements for source approval requests must be met. The performance location is Jacksonville, FL, with inquiries directed to NYA Currie at the provided DLA contact details.
Textile Bag and Canvas Mills

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335931
New
DIBBS
TERMINAL, LUGThe contract is for 556 units of the terminal lug part number PV10-8R-L manufactured by PANDUIT CORP. with CAGE code 06383, identified by NSN 5940-01-668-4714, under solicitation SPE4A7-26-T-586T. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any other standards. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with a zero-defect acceptance criterion unless otherwise specified; critical, major, and minor attributes must align with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The product must be packaged in accordance with ASTM D3951 but subordinate to DLA’s stricter packaging rules, and all packaging must be marked and labeled per MIL-STD-129. Palletization must meet DLA’s RP001 packaging requirements, and the unit of issue is each (EA) with no tolerance for quantity variance. Delivery is FOB origin with an accepted delivery offset of 171 days, and the original required delivery date is February 17, 2027. All items are to be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, with specific parcel post and freight shipping addresses provided. Inspection and acceptance occur at destination, and transportation logistics must adhere to DLAD Proc Notes C19 and C20. The contract was solicited on July 21, 2026, with proposals due by July 29, 2026, under NAICS code 335931 for electrical equipment manufacturing.
Current-Carrying Wiring Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
CONVERTER, SIGNAL DAThe contract pertains to the procurement of seven units of a Converter, Signal DA, with the NSN 5895-01-615-3408, under solicitation SPE4A7-26-T-585J, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation is a total small business set-aside under NAICS code 334511, with responses due by July 29, 2026, and delivery required within 171 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific provisions applied based on the acquisition type and revision dates in effect. The item involves controlled technical data subject to ITAR or EAR export regulations, prohibiting unauthorized disclosure or transfer to foreign persons, including foreign nationals in the U.S., and requiring compliance with DFARS 252.225-7048. Contractors must hold valid US/Canada Joint Certification Program certification, complete mandatory DOD export control training, and be formally approved by DLA to access such data. Inspection and acceptance occur at the manufacturer’s origin, non-accepted supplies must have government identification removed, and additional tailored quality requirements apply to both manufacturers and non-manufacturers. The place of performance is New Cumberland, PA, with Tamera Greene as the primary point of contact.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
SPACER, RINGThe contract is for the procurement of two SPACER, RING units with NSN 5365-01-393-9408 under solicitation SPE4A7-26-T-587Y, with a delivery deadline of 171 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on the acquisition size. The item is subject to export control under either ITAR or EAR, restricting disclosure of associated technical data to foreign persons without prior authorization from the Department of State or Department of Commerce, including foreign nationals within the United States. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization may access the controlled data. Quality requirements include inspection and acceptance at origin, removal of government identification from non-accepted items, physical identification and bare item marking, and adherence to tailored higher-level quality standards applicable to both manufacturers and non-manufacturers. Packaging must conform to DLA standards, and the item falls under the Cybersecurity Maturity Model Certification (CMMC) Level 2 requirements for third-party assessors. Covered defense information applies, and the place of performance is documented as Bremerton, Washington, with Tamera Greene as the primary point of contact.
Hardware Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
SPACER, SLEEVEThis contract pertains to the procurement of a spacer sleeve with part number 60-550-0247-1, supplied by Flowserve Corp under a Department of Defense solicitation numbered SPE4A7-26-T-586H. The item is classified as a critical application item and must comply with stringent DLA packaging and quality requirements, including adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking codes applied. Mercury and mercury-containing compounds are strictly prohibited in the material or its contact surfaces, except for specified functional uses such as batteries, fluorescent lamps, instrumentation, weapons systems, and chemical reagents as defined by NAVSEA; portable devices containing mercury must include shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, with attributes classified as critical, major, or minor assigned corresponding verification levels or AQLs. The contract specifies a quantity of 15 units with no variance allowed, to be delivered FOB origin within 171 days to the DLA Distribution facility in New Cumberland, Pennsylvania. Delivery must align with the original required date of November 4, 2027, and the need ship date of January 17, 2027. The NSN for the item is 5365-01-280-6923, and it is procured under a simplified acquisition process governed by the DLA Master List of Technical and Quality Requirements in effect on the solicitation issue date. All shipments must comply with DLA’s transportation procedures outlined in DLAD Proc Notes C19 and C20.
Hardware Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
FITTING, CARRIAGE, IN - Department Of Defense | CLEATUS