This Solicitation opportunity from Department Of Defense was posted on May 17, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

FITTING, STRUCTURAL

Closed

SPE4A5-26-T-151ZFederal

Submission Closed05/26/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336413

New

DIBBS

Supply of Flexible Couplings (NSN 1660-00-560-4009)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Manufacturing of Bypass Indicators (Source Controlled/CSI)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE8E7-26-Q-0315

This contract is for the procurement of 70 sets of clutch shoes, identified by NSN 4140-01-548-8631. The items are designated as critical application items and are associated with part numbers 1002525-1 from Hamilton Sundstrand Corporation and 767121-9K from Kihomac Inc. A key exception specifies that each set must contain two clutch shoes rather than one, and they must be packaged accordingly. The agreement is a firm fixed price contract with a delivery requirement of 60 days after receipt of order. Shipping is FOB origin, with both inspection and acceptance occurring at the destination, specifically DLA Distribution Depot Hill. Packaging must comply with ASTM D3951 and MIL-STD-129, while adhering to DLA master list technical and quality requirements, including RP001 for palletization and RQ011 for the removal of government identification from non-accepted supplies.

POSTED

DEADLINE

PLATE, STRUCTURAL, AIRCRAFT

Solicitation # SPE4A7-26-R-XB39

This solicitation from the Department of Defense, specifically the ASC Supplier OE and AF Division, is for the procurement of one structural aircraft plate under National Stock Number 1560-00-327-0732. The contract is designated as a Total Small Business Set-Aside with a delivery requirement of 98 days after receipt of order. The agreement mandates strict adherence to DLA technical and quality requirements, including CMMC Level 2 certification and specific protocols for physical identification, packaging, and inspection at origin. Due to the nature of the technical data, the contract is subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specialized training to handle the controlled data.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE4A7-26-R-XB05

Solicitation SPE4A7-26-R-XB05 is a total small business set-aside for an Indefinite Delivery Contract (IDC) to procure the Ferrule, Exciter-Rec (NSN 2995-01-087-4164). The contract features a five-year base period with firm-fixed-price terms, an estimated annual demand of 280 units, and a guaranteed minimum of 70 units, with a total value not to exceed 350,000 dollars. Delivery is required within 115 days after receipt of order on an FOB Destination basis. Award will be based on a comparative assessment of price and non-price factors, with significant weight placed on past performance and SPRS assessments. The procurement is subject to strict export controls under ITAR and EAR regulations, requiring contractors to maintain an approved US/Canada Joint Certification Program certification. Technical requirements include adherence to MIL-STD-1916 or ASQ H1331 for sampling, ASTM D3951 for packaging, and MIL-STD-129 for marking and labeling. Additionally, contractors must comply with CMMC Level 2 self-assessment requirements via the SPRS and utilize the Wide Area WorkFlow system for all invoicing and payment requests. Inspection and acceptance are conducted at source.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

GOVERNMENT FIRST ARTICLE TEST

Solicitation # SPE4A7-26-R-XB38

This solicitation, issued by the Department of Defense under the ASC Supplier OE and AF Division, is for the procurement of one cargo yoke assembly, identified by part number 0001S00000052. The contract is designated as a total small business set-aside and requires delivery within 715 days after the order is placed. The procurement is subject to strict export control regulations under ITAR and EAR, meaning technical data cannot be shared with foreign persons or exported without authorization from the Department of State or Commerce. To access this data, contractors must hold an approved US/Canada Joint Certification Program certification and complete specific DLA training and questionnaires.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE4A7-26-R-0755

Solicitation SPE4A7-26-R-0755 is a sealed bid for a Firm Fixed Price, Indefinite Quantity Contract (IQC) with a five-year base period to procure Bypass Indicators (NSN 2915-01-313-4615). The procurement includes a guaranteed minimum quantity of 20 units with an estimated annual requirement of 80 units. This item is designated as an Air Force Critical Safety Item (CSI) and is source-controlled, requiring manufacture and testing in accordance with cited limited rights data, specifically Basic Drawing 99167 5907808 Revision A. Delivery is required 308 days after receipt of order, with FOB Destination terms. The contract mandates strict quality and security compliance, including SAE AS9100 higher-level quality requirements and Cybersecurity Maturity Model Certification (CMMC) Level 2. Inspection and acceptance occur at the origin using zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Packaging must adhere to MIL-STD-2073-1E and RP001, while marking must comply with MIL-STD-129, including the contractor and manufacturer CAGE codes and part numbers. Item Unique Identification (IUID) is not required. Award decisions will be based on a comparative assessment of price and past performance, with SPRS assessments weighted most heavily.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

PLATE ASSEMBLY, ROTARY RUDDER

Solicitation # SPE4A7-26-R-XB09

This contract is for the procurement of one Rotary Rudder Plate Assembly, identified by NSN 1615-01-305-3967. The agreement is established as a Firm Fixed Price contract with a delivery requirement of 101 days after the order. Inspection and acceptance are both set to occur at the origin, with shipping terms designated as FOB Destination. The procurement is subject to rigorous quality and technical standards, including CMMC Level 2 self-assessment, DLA packaging requirements, and specific sampling methods per MIL-STD-1916 or ASQ H1331. The item is classified as a critical application item, with approved sources including Rotair Aerospace Corp, Aero Components LLC, Sikorsky Aircraft Corporation, and Essner Manufacturing LP. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Drone cases and batteries

Solicitation # 27728

The Chickasaw Nation is seeking quotes for the procurement of drone cases and batteries under solicitation number 27728. This opportunity was posted on September 11, 2026, and requires responses to be submitted by the deadline of September 16, 2026. Interested parties can find further details and submit their bids through the Chickasaw Business Network portal. For additional inquiries, the point of contact is Briten Andrews via email.

POSTED

DEADLINE

Composite Material Manufacturing

POSTED

DEADLINE

Supply of Landing Gear Wear Pads (Main Gear Brake System)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Manufacturing of Duct Assembly, Heat Exchanger (NSN 1560-00-264-1351)

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 13 hours ago

DEADLINE

in 6 days

AI Contract Overview

The contract pertains to the procurement of structural fittings designated by part number 901-069-152-101 and NSN 1560014720813, with two line items totaling 25 units required under solicitation SPE4A5-26-T-151Z. Delivery is scheduled for 167 days after award, with a need-to-ship date of November 10, 2026, and an original required delivery date of July 8, 2027. All items must be delivered FOB origin with zero variance in quantity, inspected and accepted at the destination, and shipped to two designated DLA distribution points in San Diego, CA, and Cherry Point, NC. The items are classified as critical application items and require Item Unique Identification (IUID) compliant with MIL-STD-130, including permanent machine-readable marking. Packaging must adhere to DLA’s RP001 requirements for palletization and MIL-STD-129 for marking; non-hazardous items must follow ASTM D3951 unless superseded by higher-priority DLA technical and quality requirements, while hazardous materials must comply with TQ requirement IP025 and applicable federal hazardous material regulations. Sampling for acceptance must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise specified, and verification levels for critical, major, and minor attributes are set at VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. Cybersecurity compliance mandates a CMMC Level 2 self-assessment and adherence to DFARS 252.204-7012 for safeguarding covered defense information. All technical and quality requirements listed under 'R' or 'I' numbers from the DLA Master List are binding and take precedence over other standards. Contractors must comply with hazardous material identification regulations, including submission of Safety Data Sheets, and ensure physical marking of bare items per RQ017. Configuration changes must be processed through Engineering Change Proposals, and government identification must be removed from non-accepted supplies per RQ011. Invoicing and payment processing must occur through WAWF, with mandatory electronic submission of receiving reports. The contract includes numerous DFARS and FAR clauses covering equal opportunity, trafficking in

General Info

Procurement of 25 structural fittings, delivery by July 8, 2027, with strict technical and packaging standards.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

3581 CUMMINGS ROAD BLDG 3581, SAN DIEGO, CA, 92136-3581, USA

Set-Aside

NONE

Documents

(1)

RFQ SPE4A5-26-T-151Z Request for Quotations May 18, 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedMay 17

Combined Synopsis

Type ChangedMay 17

Combined Synopsis → Solicitation

Response DeadlineMay 26

Deadline has passed

Submission Closed

05/26/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

View Agency Profile

Office AddressUSA

Contacts

Kay Bates

contact@example.gov

+1 (555) 000-0000

Full Description

FITTING, STRUCTURAL
FITTING<(>,<)> STRUCTURAL
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RT001: MEASURING AND TEST EQUIPMENT
This item requires Item Unique Identification (IUID) in accordance with the enclosed/referenced IUID technical requirements and MIL-STD-130. DFARS 252.211-7003 clause applies.
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
BELL TEXTRON INC 97499 P/N 901-069-152-101
SPE4A5-26-T-151Z
SECTION B
PR: 7016785716 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016785716 0001 EA 2.000
NSN/MATERIAL:1560014720813
DELIVERY (IN DAYS):0167
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
SPE4A5-26-T-151Z
SECTION B
PR: 7016785716 PRLI: 0001 CONT’D
Need Ship Date:11/10/2026 Original Required Delivery Date:07/08/2027
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7016785716 0002 EA 23.000
NSN/MATERIAL:1560014720813
DELIVERY (IN DAYS):0167
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
SPE4A5-26-T-151Z
SECTION B
PR: 7016785716 PRLI: 0002 CONT’D
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
Need Ship Date:11/10/2026 Original Required Delivery Date:07/08/2027
SPE4A5-26-T-151Z NSN/Part Number: 1560-01-472-0813 Quantity: 2 EA Purchase Request: 7016785716QTY: 25 Delivery: 167 days ADO