Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

Five Pumps

Active
SRC0000041673State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SRC0000041673 is issued by the Ohio Department of Natural Resources for the purchase of five new Hydromatic pumps to be used at Deer Creek and Paint Creek State Parks. The requirement includes specific pump models ranging from 2 HP to 7.5 HP with varying impeller sizes and voltage specifications. The contract will be awarded to the lowest responsive and responsible bidder on a line-item basis. All units must be delivered F.O.B. destination to Deer Creek State Park in Mt. Sterling, Ohio, by October 30, 2026. The procurement is subject to the State of Ohio Standard Terms and Conditions, which include adherence to Buy American and Buy Ohio preferences, drug-free workplace policies, and compliance with the Ohio Revised Code. Bidders must utilize the OhioBuys platform and maintain an OH|ID account for registration and transaction management. Payments will be processed via electronic funds transfer through Financial Shared Services. The solicitation was posted on September 2, 2026, with a response deadline of September 18, 2026.

General Info

Ohio Department of Natural Resources seeks five Hydromatic pumps via lowest responsive bidder.

Agency

Ohio → Dnr353610 Salt Fork State Park DnrgueView Agency

NAICS

333996 - Fluid Power Pump and Motor ManufacturingView NAICS

Place of Performance

OH, USA

Set-Aside

NONE

Documents

(4)

RFQ Deer Creek Five Pumps

PDF•rfq

State of Ohio Standard Terms and Conditions 5-22-26

PDF•24 pages•standard-terms-and-conditions

State of Ohio Supplier Operations FAQ and Portal Guide

PDF•other

OhioBuys Fact Sheet for Bidders and Suppliers

PDF•2 pages•special-notice

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyOhio → Dnr353610 Salt Fork State Park Dnrgue
ContactsNo contacts available
OfficeN/A
Organization / Agency
Ohio → Dnr353610 Salt Fork State Park Dnrgue
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
See attached specifications
Contract Award. The contract will be awarded to the lowest responsive and responsible bidder by line item.
Pumps
Items I1_000001 | Required Item | Hydromatic S4HVXP750ED, 7.5 HP, 230V, 3PH, 3450 RPM, 5” imp. I1_000002 | Required Item | Hydromatic HPGFHX500, 5 HP, 230 VAC, 3PH, 10.125” imp. I1_000003 | Required Item | Hydromatic HPGFHX500, 5 HP, 230 VAC, 3PH, 9.0” imp. I1_000004 | Required Item | Hydromatic HPGFHX500, 5 HP, 230 VAC, 3PH, 5.0 imp. I1_000005 | Required Item | Hydromatic S4NVX200CB, 2 HP, 230 VAC, 1PH, 6.12 imp.

Similar Contracts

Same NAICS industry code

NAICS: 333996
New
DIBBS
STATOR ASSEMBLY, PUMP
Solicitation # SPE4A7-26-R-0767
Contract SPE4A7-26-R-0767 is a firm fixed price solicitation issued by the Department of Defense DLA Aviation for the procurement of six stator assemblies for pumps under NSN 2915-00-449-9118. The contract specifies a delivery timeline of 270 days after order and designates the point of inspection and acceptance as the origin. This is classified as a critical application item, with approved sources including Hydro-Aire Aerospace Corp, Skurka Aerospace Inc, and New Phoenix Aerospace Inc. The agreement mandates strict adherence to technical and quality standards, including CMMC Level 2 self-assessment, covered defense information protocols, and configuration change management. Packaging must comply with ASTM D3951 and RP001 DLA requirements, while marking must follow MIL-STD-129. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, and the contract incorporates the DLA Master List of Technical and Quality Requirements. Item Unique Identification is not required per the service customer request.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

in 29 days
View Details
NAICS: 333996
New
DIBBS
REPAIR OVERHAUL KIT
Solicitation # SPE7M1-26-Q-1454
This contract is a solicitation for the procurement of 85 Repair Overhaul Kits, identified by NSN 4320-01-507-7990 and Dover Pumps and Process Solutions part number 957420. The agreement is established as a Firm Fixed Price contract with a delivery requirement of 30 days after the order is placed. All items are to be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. A critical environmental restriction is included prohibiting the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions defined by NAVSEA. This procurement is designated as a Total Small Business Set-Aside under NAICS code 333996 and is managed by the Department of Defense Maritime Supply Chain.
MARITIME SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333996
New
PUMP,RECIPROCATING — 4320011820200 — SPRPA126QYD35
Solicitation # SPRPA126QYD35
This solicitation, issued by the Department of the Navy via the DLA Aviation office in Philadelphia, is for the procurement of a reciprocating pump under solicitation number SPRPA126QYD35. The contract specifies that the material is designated as critical because it is used in shipboard systems for aircraft launch and recovery, where failure could lead to serious injury or loss of life. Consequently, strict control procedures are required to ensure the delivery of correct and non-defective materials. The contractor is responsible for manufacturing, testing, and inspecting the items according to NAWCAD Lakehurst drawing 6532D326 and associated specifications. All necessary manufacturing aids, including fixtures, jigs, and test equipment, are the sole responsibility of the contractor. Markings must comply with MIL-STD-130, packaging must follow MIL-STD-2073, and compliance with IPC/EIAJ-STD-001C is expected if MIL-STD-454 is referenced. The response deadline for this solicitation is October 5, 2026.
Pa DLA Aviation At Philadelphia

POSTED

about 23 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 333996
New
DIBBS
Supply of Centrifugal Fans (NSN 4140001506174)This subcontract involves the supply of 35 centrifugal fans meeting NSN 4140001506174 specifications for prime contractors supporting DLA Troop Support supply contracts. The manufacturer or source is responsible for ensuring all hardware adheres to the required specifications and that packaging complies with ASTM D3951 and RP001 standards, including the provision of Material Safety Data Sheets where applicable. The contract is managed by the Department of Defense through the DDSP New Cumberland Facility, with the place of performance located in New Cumberland, Pennsylvania. Deliveries are set as FOB Origin, and the procurement falls under NAICS code 333999. The response deadline for this opportunity is September 14, 2026.
DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 333996
New
DIBBS
REPAIR KIT, PUMPING
Solicitation # SPE7M1-26-T-325V
Solicitation SPE7M1-26-T-325V is a fixed-price request for quotations issued by DLA Land and Maritime for the procurement of two pumping repair kits, identified by NSN 4320123818307. The required items correspond to part number 7250121-081 from Evac North America Inc or part number PBA.D006 from Hugo Maschinenbau GmbH Vogelsang. The supplies are to be delivered to the USS Zumwalt DDG 1000 at FPO AP 96693, with a required delivery date of July 14, 2026, and a delivery window of 20 days after award. Both inspection and acceptance will occur at the destination. The contract mandates strict adherence to packaging and marking standards, requiring compliance with MIL-STD-129 and ASTM D3951, though the DLA Master List of Technical and Quality Requirements takes precedence. Palletization must follow RP001 guidelines. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Offerors must comply with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. The solicitation is categorized under NAICS 333996, and interested parties must be registered in the System for Award Management.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 333996
New
DIBBS
IMPELLER, PUMP, CENTRIFU
Solicitation # SPE7M4-26-T-377X
Solicitation SPE7M4-26-T-377X, issued by the DLA Land and Maritime Fluid Handling Division, is a request for quotations for two centrifugal pump impellers (NSN 4320-01-065-1805). This is a restricted source item and a critical application item, meaning it requires engineering source approval from the government design control activity. The delivery is set for New Cumberland, Pennsylvania, with a need ship date of February 16, 2027, and an original required delivery date of March 8, 2028. Alternate offerors must provide extensive documentation per MIL-T-31000, including all manufacturing drawings, process sheets with inspection criteria, and identification of sources for forgings and castings. A shock extension report compliant with MIL-S-901 and DI-ENVR-80706 is required. If original equipment manufacturer drawings are unavailable, the offeror must submit a detailed engineering analysis report, including full reverse engineering procedures if applicable. The contract mandates compliance with CMMC Level 2 self-assessment and the safeguarding of covered defense information. Packaging must adhere to MIL-STD-2073-1E and RP001, with marking following MIL-STD-129. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. The procurement is subject to the Buy American Act, the Berry Amendment, and destination inspection per FAR 52.246-2. Quotations are due by September 14, 2026, via the DIBBS portal.
FLUID HANDLING DIVISION

POSTED

2 days ago

DEADLINE

in 11 days
View Details
NAICS: 333996
New
DIBBS
PUMP, HYDRAULIC
Solicitation # SPE7M1-26-T-322A
This contract is for the procurement of nine hydraulic pumps under solicitation number SPE7M1-26-T-322A for the Department of Defense Maritime Supply Chain. The items are identified by NSN 4320-01-467-2043 and are classified as critical application items. The procurement is a total small business set-aside under NAICS code 333996, with delivery required within 157 days. The supplier must adhere to technical and quality requirements set forth in the DLA Master List and follow specific packaging standards, including ASTM D3951 and MIL-STD-129. Delivery is FOB Origin with inspection and acceptance occurring at the destination. The designated shipping address is DLA Distribution Cherry Point in North Carolina, with a required delivery date of December 22, 2026, and a need ship date of February 16, 2027.
MARITIME SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 333996
New
DIBBS
PUMP, HYDRAULIC
Solicitation # SPE7M1-26-T-321H
This contract is for the procurement of one hydraulic pump, identified as a Commercial Off The Shelf item with NSN 4320994260865 and part number PV063R1D3T1NFFP from Parker Hannifin (UK) Ltd. The order is managed by the Department of Defense Maritime Supply Chain under solicitation number SPE7M1-26-T-321H. Delivery is required within 20 days, with a required delivery date of August 13, 2026, shipped FOB destination to the USS Michael Monsoor. The supplier must adhere to DLA master technical and quality requirements, specifically regarding packaging standards ASTM D3951 and MIL-STD-129, as well as RP001 packaging requirements. A strict prohibition is placed on the use of Class I ozone depleting chemicals in the manufacturing or delivery of the item. Inspection and acceptance will take place at the destination point.
MARITIME SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 333996
New
DIBBS
SEAL ASSEMBLY, SHAFT
Solicitation # SPE7M2-26-T-6606
Solicitation SPE7M2-26-T-6606 is a fixed-price request for quotations issued by the DLA Land and Maritime Nuclear Reactor Program for the procurement of 18 spring-loaded shaft seal assemblies, identified by NSN 4320-00-859-6338. The requirement specifies a delivery period of 47 days after receipt of order, with a need ship date of October 29, 2026, and an original required delivery date of December 29, 2026. Delivery is FOB Origin, with the destination and inspection point located at the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements via the DLA Master List, including specific documentation for Source Approval Requests and a non-extendable shelf life of 180 months. Packaging must comply with MIL-STD-2073-1E and RP001, with a strict prohibition on plastic packaging materials, while marking must follow MIL-STD-129. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and payment, and compliance with various FAR and DFARS clauses regarding domestic sourcing, cybersecurity, and hazardous material labeling.
NUCLEAR REACTOR PROGRAM

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 333996
New
DIBBS
EJECTOR, JET
Solicitation # SPE7M1-26-T-321U
This solicitation, identified as SPE7M1-26-T-321U, is issued by the Department of Defense Maritime Supply Chain for the procurement of two jet ejectors, identified by NSN 4320-01-517-8561 and part number 925N-2.5IN L from Vita Motivator Co Inc. The requirement is set aside for Women-Owned Small Businesses under NAICS code 333996. The items are to be manufactured using a metal casting process, which requires specific tooling. Sourcing and technical assistance for these processes are available through the DLA Aviation or Land and Maritime supply chain engineering teams. The contract specifies a delivery timeframe of 178 days after order, with a required delivery date of March 9, 2027. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must adhere to DLA packaging requirements for procurement. Technical and quality standards are governed by the DLA Master List, and the removal of government identification from non-accepted supplies is strictly required.
MARITIME SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 333996
New
Federal
Pump Unit, Hydraulic
Solicitation # SPRDL1-26-R-A019
Solicitation SPRDL1-26-R-A019 is a 100% total small business set-aside for the procurement of hydraulic pump units, identified by NSN 4320-01-432-6208. This is a five-year Indefinite Delivery Indefinite Quantity contract using a Firm Fixed Price structure. The requirement specifies a minimum quantity of 21 units and a maximum of 406, with an initial delivery order of 65 units. Delivery timelines are set at 330 days if a First Article Test is required, or 240 days if the test is waived. The contract includes strict quality and technical requirements, including Higher-Level Contract Quality, MIL STD-1916 compliance, and specific pretreatment and CARC painting standards. Because the technical data is export controlled, interested bidders must be certified under the United States/Canada Joint Certification Program to access the technical data package via SAM.gov. Range pricing may be proposed, and while a reverse auction is not required, the contracting officer reserves the option to use one as a pricing technique.
DLA Land Warren

POSTED

4 days ago

DEADLINE

in 13 days
View Details
NAICS: 333996
New
DIBBS
Diffusor Assembly Supplier
MARITIME SUPPLY CHAIN

POSTED

4 days ago

DEADLINE

in 7 days
View Details

More opportunities from Ohio → Dnr353610 Salt Fork State Park Dnrgue

Same awarding agency

NAICS: 333911
SLED
Supply of Barnes XSGV2022L Grinder PumpThis subcontract involves the supply and delivery of a Barnes XSGV2022L grinder pump for the Salt Fork State Park under the Ohio Department of Natural Resources. The provided equipment must match the exact model specified and adhere to all implied technical standards. The opportunity was posted on August 21, 2026, with a response deadline of September 8, 2026, at 2:00 PM. This procurement falls under NAICS code 333911 and is managed through the OhioBuys system.
Pump and Pumping Equipment Manufacturing

POSTED

14 days ago

DEADLINE

in 4 days
View Details
NAICS: 333911
SLED
Supply of Pentair S3HRC300M4-2 Sewage PumpThis subcontract involves the procurement and delivery of a Pentair S3HRC300M4-2 sewage pump for the Ohio agency Dnr353610 Salt Fork State Park Dnrgue. The selected supplier is required to provide the exact model specified, ensuring full compliance with all associated technical requirements. The solicitation was posted on August 21, 2026, with a response deadline of September 8, 2026, at 2:00 PM. This procurement falls under NAICS code 333911 and is managed through the OhioBuys portal.
Pump and Pumping Equipment Manufacturing

POSTED

14 days ago

DEADLINE

in 4 days
View Details
NAICS: 333911
SLED
Supply of Flygt 3085.060.0026 NP3085 Submersible PumpThis subcontract involves the procurement and delivery of a Flygt 3085.060.0026 NP3085 submersible pump for the Ohio agency Dnr353610 Salt Fork State Park Dnrgue. The selected supplier is responsible for ensuring the pump model is accurate and fully compliant with all referenced specifications and state procurement requirements. The opportunity was posted on August 21, 2026, with a response deadline of September 8, 2026, at 2:00 PM. Classified under NAICS code 333911, the contract focuses on the specialized supply of submersible pumping equipment to meet the operational needs of the state park.
Pump and Pumping Equipment Manufacturing

POSTED

14 days ago

DEADLINE

in 4 days
View Details
NAICS: 333914
SLED
Three Lift Station Pumps
Solicitation # SRC0000041434
The Ohio Department of Natural Resources, specifically the Department of Parks and Watercraft, is soliciting bids for the purchase of three specific lift station pumps for Salt Fork State Park in Lore City, Ohio. The required equipment includes one Flygt 3085.060.0026 NP3085.060 (460V, 3 phase, 2.2 HP), one Pentair S3HRC300M4-2 (460V, 3 phase, 10 HP), and one Barnes XSGV2022L (230V, single phase, 2 HP), all featuring 35-foot cables. The contract will be awarded to the lowest responsive and responsible bidder on a per-line-item basis. Deliveries must be made F.O.B. Destination/Pre-Paid/Allowed to Salt Fork State Park, with the contractor bearing all freight costs and maintaining risk of loss until the State accepts the deliverables. Payment is primarily handled via electronic funds transfer, with terms set at 30 calendar days from the receipt of a proper invoice. The agreement is governed by the State of Ohio Standard Terms and Conditions, which mandate compliance with GAAP financial record-keeping for three years post-payment, adherence to NIST cybersecurity frameworks, and the maintenance of specific insurance ratings. Suppliers must utilize the OhioBuys platform and maintain an OH|ID account for procurement and payment processing.
Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

14 days ago

DEADLINE

in 4 days
View Details