Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Fixed Attenuator Supply (Electronic Component Manufacturing)

Active

Federal

Response Deadline08/11/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract mandates the supply of three fixed attenuators identified by NSN 5985-01-211-5964, which must fully comply with applicable military specifications for performance and quality. The vendor is responsible for proper packaging and labeling in accordance with defense logistics standards, ensuring the components are protected and identifiable throughout transport and handling. Delivery is required within 30 days of order placement, emphasizing strict adherence to timeline requirements to support operational readiness. The performance location is designated as Chambersburg, Pennsylvania, with the ZIP code 17201-4150, indicating the intended destination for shipment or integration. The contract was posted on July 28, 2026, with responses due by August 11, 2026, and falls under the NAICS code 334511 for electronic component manufacturing. It is classified as a subcontract under the Department of Defense’s Maritime Supply Chain ESOC Buys initiative, though no specific set-aside provisions or point of contact details are provided. All work must meet DoD procurement standards and be executed in line with defense supply chain protocols.

General Info

Supply three NSN 5985-01-211-5964 attenuators to Chambersburg, PA by August 11, 2026, per military specs.

Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYSView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingView NAICS

Place of Performance

CHAMBERSBURG, PA, 17201-4150, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 11

Submission deadline

Response Deadline

08/11/2026, 05:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of three fixed attenuators (NSN: 5985-01-211-5964) meeting military specifications, including packaging, labeling, and delivery within 30 days of order.

Similar Contracts

Same NAICS industry code

Expeditionary Unmanned Aerial System (eUAS) Manufacturing and Employment Capability Request for InformationThe United States Air Force Rapid Sustainment Office is seeking market input on an expeditionary unmanned aerial system manufacturing and employment capability through a Capability Request for Information, designated RSO-AMPOECT-04. This initiative aims to identify commercially available solutions for rapid, on-demand production of attritable UASs, first-person view drone kits, counter-UAS interceptors, and associated components in remote and contested environments, reducing dependence on traditional supply chains. The system must be transportable in standard ISO containers, ruggedized to MIL-STD-810 environmental standards, and capable of operating across extreme temperatures from -40°F to 125°F using military-grade power sources and integrated climate control. Compliance with NDAA Section 848 and exclusion of components from covered nations such as China, Russia, Iran, and North Korea is mandatory, with strict adherence to Buy American Act requirements and DCMA Blue List architecture. The solution must feature an open system architecture supporting standard file formats like STL and STEP, enable modular and interchangeable materials, and incorporate FIPS 140-2/3 encrypted storage with full integration of the DoD Risk Management Framework for cybersecurity. Respondents must submit a white paper limited to 11 pages total, partitioned into one page of business information and ten pages detailing technical capabilities and past experience. The submission must clearly address system design for drone-agnostic manufacturing, production timelines from request to field deployment, logistics footprint, power and environmental resilience, durability metrics, and current Technology and Manufacturing Readiness Levels. Experience in assembling UASs under austere conditions, managing compact system weight, interfacing with off-grid power, and deploying rapidly in field conditions will be heavily weighted. Proprietary information must be clearly marked and will be protected in accordance with the Trade Secrets Act and Economic Espionage Act under controlled review by government and contracted technical personnel. All responses must be sent electronically to aflcmc.rod.ect@us.af.mil no later than 30 calendar days after posting on sam.gov, with no reimbursement provided for response costs and no binding obligation assumed by the government. Questions must be submitted in writing prior to the deadline and will be addressed publicly or on a case-by-case basis if proprietary.

FA8684 Aflcmc Rodk

POSTED

about 4 hours ago

DEADLINE

in about 1 month

58--THERMAL IMAGING SYSThis contract, issued under solicitation number N0010426RQA81 by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, is a firm fixed-price procurement for 40 units of the THERMAL IMAGING SYS, with a delivery requirement of 180 days after award. The contract is awarded under a Basic Ordering Agreement (BOA), incorporating its terms unless superseded by this order, and requires all proposals to be submitted via NECO or email. The item must conform to Cage Code 53711 and reference number 7287197, with physical identification strictly following MIL-STD-130 Revision N. Quality assurance mandates that the contractor perform all inspections using approved facilities, maintain complete records for 365 days post-delivery, and ensure no defective material is submitted, even if sampling is employed. Packaging and marking must adhere to MIL-STD-2073 and MIL-STD-129, with Level B packaging for domestic and air shipments and Level A for surface overseas deliveries. All containers must bear machine-readable labels compliant with MIL-STD-130, inclusive of Procurement Instrument Identifier, Contract Line Item Number, SubCLIN, and DLR labeling where applicable, using yellow text on a blue background. Payment and invoicing are processed exclusively through Wide Area WorkFlow (WAWF) using the DoDAAC N00104, and the contractor must submit an invoice and receiving report for this fixed-price line item. Compliance with NIST SP 800-171 and DFARS 252.204-7012 is required for safeguarding Controlled Unclassified Information, and the contractor must implement security measures for covered defense information systems. The contractor must also comply with DoD Manual 4145.26 for the safe handling of ammunition and explosives, notify DCSA of any AA&E-related subcontracts within 10 days, and flow down AA&E requirements to all subcontractors. Further requirements include adherence to Buy American provisions, certification of non-segregated facilities, the Integrity of Unit Prices clause, and the mandatory use of Workflow Pro. Offerors must be authorized distributors with proof submitted, and must complete current SAM registrations including representations for small business status, foreign ownership, and telecommunications equipment restrictions. Evaluation prioritizes past performance as a pass/fail gate, with price being secondary; the award will go to the offeror

Navsup Weapon Systems Support Mech

POSTED

about 4 hours ago

DEADLINE

in about 1 month

66--SEXTANT,MARINEThe contract seeks the procurement of 57 marine sextants with NSN 6605012533442, to be delivered to DLA Distribution at location W1A8 within 164 days after award. This solicitation, identified as SPE4A526T312S, is advertised as a combined solicitation and is exclusively open to SBA-certified Women-Owned Small Business concerns under the WOSB Program Set-Aside. The North American Industry Classification System code is 334511, indicating the focus on navigational and surveying instrument manufacturing. All responses must be submitted electronically through the designated online portal, with no hard copies available; digitized technical documents including drawings and military specifications can be accessed or ordered electronically. The solicitation was posted on July 29, 2026, with a firm response deadline of August 6, 2026. Questions should be directed via email to the buyer listed in the solicitation document, accessible through the provided SAM.gov link or the DIBBS website using the solicitation number. The contracting office is located in Richmond, Virginia, under the Department of Defense’s DLA Aviation organization.

POSTED

about 4 hours ago

DEADLINE

58--THERMAL IMAGING SYS, IN REPAIR/MODIFICATION OFThis contract, solicitation number N0010426RQA79, is a fixed-price procurement issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, for the repair and modification of the Thermal Imaging System identified by NSN 5855-01-499-1240 and CAGE code 53711. The requirement calls for 41 units to be repaired, evaluated, and/or modified to meet original manufacturer specifications and operational standards, with delivery required within 180 days of award. The contractor must adhere to rigorous quality assurance protocols, including performing all inspections and testing in accordance with manufacturer drawings and technical directives, maintaining complete inspection records for 365 days after final delivery, and ensuring compliance with MIL-STD-130 for item marking. Packaging and preservation must follow MIL-STD-2073-1 with Level B packaging for all domestic and overseas shipments, including those delivered to Navy ships at sea, and must include ESD protection compliant with ANSI/ESD S20.20-2021 for sensitive components. All shipping containers must be labeled per MIL-STD-129, with mandatory inclusion of the Procurement Instrument Identifier, Contract Line Item Number, and SubCLIN, alongside a yellow-on-blue DLR label for Depot Level Repairable items. The contract mandates use of Wide Area Workflow (WAWF) for all invoicing and receiving reports, and requires certification of contractor compliance with NIST SP 800-171 Rev. 2 for cybersecurity protection of controlled unclassified information. The contractor must be an authorized distributor of the original manufacturer, and proof of authorization must be submitted with the proposal. The contract incorporates a comprehensive suite of regulatory and compliance clauses, including FAR 52.216-1 for firm-fixed-price structure, FAR 52.246-2 for inspection of supplies, and DFARS clauses covering Buy American and Balance of Payments Program, electronic payment submission, integrity of unit prices, government property, and contractor purchasing system administration. It requires annual representations and certifications through SAM, including disclosures on foreign ownership, trade agreements, and the prohibition of trafficking in persons. The seller must comply with small business subcontracting requirements and is subject to security prohibitions and exclusions under a class deviation effective February 2026. Offers must be submitted exclusively via NECO or email by 4:00 PM

Navsup Weapon Systems Support Mech

POSTED

about 4 hours ago

DEADLINE

in about 1 month

Specialized Electronics Packaging and LabelingThe contract requires the provision of ESD-safe packaging, hazardous material labeling, and DoD-compliant marking for semiconductor components, all in strict adherence to IPC, JEDEC, and OSHA industry standards. The work involves ensuring that all packaging materials protect sensitive electronics from electrostatic discharge while simultaneously meeting federal requirements for the identification and handling of hazardous substances. Marking must conform to Department of Defense specifications to ensure traceability, compliance, and operational readiness across military supply chains. Performance of this subcontract is located in West Bath, Maine, with a zip code of 04530, and the NAICS code 334511 classifies it under Semiconductor and Related Device Manufacturing. The solicitation was posted on July 28, 2026, with a response deadline of July 31, 2026, indicating a tight turnaround for qualified vendors to submit proposals. The contracting activity falls under the Active Devices Division of the Department of Defense, emphasizing the critical nature of the components and the need for precision and regulatory compliance in all packaging and labeling processes.

ACTIVE DEVICES DIVISION

POSTED

about 23 hours ago

DEADLINE

Supply of Analog to Digital Converter (Commercial Off-The-Shelf Item)The contract mandates the procurement and delivery of a commercial off-the-shelf Analog to Digital Converter that meets all applicable military specifications, packaging standards, and regulatory requirements. The item must be brand new, securely packaged to withstand transit, and shipped under FOB Origin terms, meaning the buyer assumes all risks and costs once the item leaves the supplier’s location. Compliance with military-grade performance, environmental, and durability criteria is non-negotiable, and the supplier must ensure all documentation and certifications accompany the shipment to confirm adherence to standards. The solicitation is issued under NAICS code 334511 for Electronic Component and Product Manufacturing and has a response deadline of August 10, 2026. The contract is classified as a subcontract under the Department of Defense, specifically managed by the Construction & Equipment T & IFO EQ office, with performance required at the designated location in New Cumberland, Pennsylvania, zip code 17070-5002. The posting date is July 28, 2026, indicating this is a future opportunity, and bidders must review the full solicitation through the provided DIBBS link to ensure full compliance with all technical, logistical, and administrative requirements prior to submission.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 23 hours ago

DEADLINE

Precision Electromechanical Component ManufacturingThe contract requires the manufacture of a Synchro, Differential Transmitter identified by NSN 5990009244166, built to meet the exacting standards of SAE AS20708C Revision C, encompassing precision winding, calibration, and rigorous testing to ensure operational fidelity. This is a subcontract under the Department of Defense's Maritime Supply Chain ESOC Buys initiative, with performance to occur at an FPO address designated by the zip code 96681-3904, indicating a military postal location with no specific city or state provided. The work demands high-precision electromechanical fabrication capabilities aligned with defense-grade specifications, where reliability and accuracy are critical for system integration. The solicitation was posted on July 28, 2026, with a firm response deadline of August 10, 2026, giving potential contractors a two-week window to submit proposals. The NAICS code 334511 classifies the work under Other Electronic Component Manufacturing, underscoring the specialized nature of the task. There is no set-aside designation specified, meaning the opportunity is open to all eligible bidders without preference given to small businesses or other categories. The contract is managed under the DIBBS platform with a public link for access to detailed submission requirements, and while no point of contact is listed, interested parties must adhere strictly to the technical and procedural guidelines tied to the SAE standard and NSN specification to qualify.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 23 hours ago

DEADLINE

Supply of Analog to Digital Converter (COTS Item)The contract entails the procurement and delivery of two units of a commercial off-the-shelf Analog to Digital Converter identified by NSN 7050124028100, classified under NAICS code 334511 for manufacturing electronic components and accessories. The requirement is structured as a subcontract under the Department of Defense, specifically managed by the Construction & Equipment T & IFO EQ office, with performance obligated at Tracy, California, ZIP 95304-5000. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026, with all submissions required through the DIBBS platform accessible via the provided UI link. No set-aside provisions or specific small business designations are indicated, and the equipment must be delivered as a standard COTS item without customization or government-furnished specifications beyond the NSN.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 23 hours ago

DEADLINE

Antenna Manufacturing and SupplyThe contract requires the manufacture, testing, and delivery of one defense-grade antenna identified by NSN 5985-12-418-4346, fully compliant with DLA R001 specifications. The scope of work encompasses all stages of production, including rigorous inspection, proper packaging, accurate labeling, and secure shipment to meet military standards. The item must be produced to withstand demanding operational environments and adhere strictly to the technical and quality requirements outlined by the Department of Defense. All deliverables must be verified for conformance prior to handover to ensure mission readiness and interoperability. This is a subcontract opportunity posted by the Maritime Supply Chain ESOC Buys under the Department of Defense with a NAICS code of 334511 for radio and television broadcasting and wireless communications equipment manufacturing. The solicitation was made available on July 28, 2026, with a response deadline of August 11, 2026. No set-aside designation is specified, meaning it is open to all qualified entities. The place of performance and point of contact details are not provided in the contract data, but the designated procurement portal for submissions and further information is accessible via the DIBBS system at the provided URL.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 23 hours ago

DEADLINE

INDICATOR, CARBON DIThe contract pertains to the procurement of one unit of an Indicator, Carbon DI, identified by NSN 6665-01-724-8111 and part number ES-1531-CO-S, supplied by RKI INSTRUMENTS, INC. Delivery is required within five days of award, with FOB origin terms, and the item must be shipped via the fastest traceable means excluding parcel post to the Sierra Army Depot in Herlong, California. No quantity variance is permitted, and inspection and acceptance occur at the destination. Packaging must comply with DLA Master List technical and quality requirements, including RP001 for packaging, MIL-STD-129 for marking and labeling, and FED-STD-313 to determine hazardous status; if non-hazardous, commercial packaging per ASTM D3951 applies but is subordinate to DLA requirements. The item may contain batteries, necessitating compliance with RQ035. All packaging must adhere to specified unit of issue and quantity per unit pack, with palletization following DLA guidelines. The contract references SPE7M0-26-T-022H as the controlling solicitation, with a required delivery date of July 24, 2026, and a response deadline of August 10, 2026. The item is classified under NAICS 334511, and government use codes indicate specific logistics and distribution protocols. Contact for inquiries is Gerard Quinn, with email and phone provided for coordination.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 23 hours ago

DEADLINE

VALVE PORT, NEEDLE FREEVALVE PORT, NEEDLE FREE is a sterile, needleless connector designed for use in medical applications requiring neutral displacement and touch-free operation, supplied in peel pouches to maintain sterility. Each package contains 200 units, with the contract calling for three packages totaling 600 units. The item has a non-extendable shelf life of 60 months, and no more than nine months may have elapsed from the date of manufacture to the date of delivery to the government. Packaging must comply with DLA requirements, and all technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Bidders must clearly identify the source and part number being offered. The NSN is 6515-01-591-5707, with a delivery requirement of 20 days after order award, and performance is mandated at Fort Bliss, Texas. The solicitation, issued under SPE2DS-26-T-277A, was posted on July 28, 2026, with responses due by August 3, 2026, and is administered by the Department of Defense’s Medical Supply Chain under the NAICS code 334511. Point of contact for inquiries is Dorothy Marquis, reachable via email or phone provided.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 23 hours ago

DEADLINE

BLOOD RECIPIENT SET, INThe contract specifies the procurement of 48 units of a Blood Recipient Set designed for indirect transfusion, featuring a Y-type blood and solution set with a standard large blood filter ranging from 170 to 260 microns and a pressure pump. The set includes two ClearLink Luer actuated valves, one positioned 6 inches and the other 42 inches from the male Luer lock adapter, with an approximate drop rate of 15 drops per milliliter and an overall length of approximately 99 inches or 2.5 meters. Each unit must be sealed in a protective container to prevent damage and shipped in commercial exterior packaging suitable for safe transport via common carriers at the lowest cost to the designated delivery point at Fort Bragg, North Carolina. All packaging and marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements apply. The NSN is 6515-01-593-0865, the solicitation number is SPE2DS-26-T-277W, bids are due by August 3, 2026, and delivery is required within 20 days of award. The item falls under NAICS code 334511 and is managed by the Department of Defense’s Medical Supply Chain.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 23 hours ago

DEADLINE

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

Same awarding agency

Commercial Item Logistics & Transportation (Hazardous Materials)The contract solicits services for the transportation and delivery of fuse cartridges, which may include hazardous materials, under strict compliance with IP025 standards and Department of Defense destination requirements. The work is classified as a subcontract and falls under NAICS code 484220, indicating it pertains to truck transportation for specialized freight, including hazardous goods. Performance is required at Fort Eustis, Virginia, with a zip code of 23604-5577, ensuring all logistics align with DoD military logistics protocols. The posting date is July 28, 2026, and responses must be submitted by August 10, 2026, giving potential vendors a two-week window to propose capabilities, compliance measures, and execution plans. The contracting entity is the Maritime Supply Chain ESOC Buys under the Department of Defense, emphasizing the critical nature of secure, regulated transport for sensitive military ordnance components.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 23 hours ago

DEADLINE

MIL-STD-129 Packaging and Marking ServicesThe contract requires the provision of packaging, labeling, and marking services compliant with MIL-STD-129 and RP001 standards for military shipments, ensuring all units are properly identified with Data Matrix barcodes and other required markings. The work must meet stringent Department of Defense specifications for traceability, durability, and consistency across all packaging elements to support logistics and inventory management in operational environments. Compliance with these standards is mandatory, and all deliverables must align with current military packaging regulations to ensure seamless integration into the defense supply chain. The contract is categorized as a subcontract under NAICS code 561910 and is issued by the Maritime Supply Chain ESOC Buys under the Department of Defense. Performance is required at Fort Eustis, Virginia, with a response deadline of August 10, 2026. The solicitation is open for bids through the DIBBS platform, and bidders must be prepared to demonstrate proven experience and capability in handling military-grade packaging and marking requirements. No set-aside classification is specified, meaning the contract is open to all eligible subcontractors capable of meeting the technical and regulatory demands.

Packaging and Labeling Services

POSTED

about 23 hours ago

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract involves the preparation and submission of hazard warning labels and Safety Data Sheets for fuse cartridges classified as hazardous materials, requiring precise adherence to regulatory standards. It includes expert consultation on compliance with the Occupational Safety and Health Administration’s Hazard Communication Standard and the Defense Federal Acquisition Regulation Supplement, ensuring all documentation meets federal requirements for defense-related hazardous goods. The work must be performed in alignment with OSHA HCS and DFARS to support safe handling, storage, and transport of these materials within the defense supply chain. The solicitation is issued as a subcontract under NAICS code 541690 by the Maritime Supply Chain ESOC Buys office of the Department of Defense, with performance required at Fort Eustis, Virginia, zip code 23604-5577. Proposals must be submitted by August 10, 2026, following the posting date of July 28, 2026. The contractor is expected to deliver accurate, compliant documentation tailored to the specific hazards of fuse cartridges, supporting regulatory transparency and operational safety for Defense Department logistics and usage.

Other Scientific and Technical Consulting Services

POSTED

about 23 hours ago

DEADLINE

Fuse Cartridge Supply (Electrical Components)The contract seeks the supply of commercial off-the-shelf fuse cartridges in defined quantities and configurations, with specific packaging and delivery requirements outlined in the CLINs. These electrical components are intended for military use and must meet exact technical and logistical standards to ensure operational readiness. The place of performance is designated as Fort Eustis, Virginia, with all deliveries expected to comply with the specified location and timeline. Bidders must respond by the deadline of August 10, 2026, under a subcontract arrangement governed by the Department of Defense through the Maritime Supply Chain ESOC Buys organization. The NAICS code 335313 indicates the focus on electrical lighting and wiring equipment manufacturing, aligning with the nature of the fuse cartridges being procured. While no set-aside designation is specified, all proposals must adhere to the commercial off-the-shelf requirement and fulfill all packaging, labeling, and delivery stipulations detailed in the solicitation.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 23 hours ago

DEADLINE

Transportation and Shipment ComplianceThe contract requires the coordination of transportation for a hose assembly with strict adherence to MIL-STD-129 marking standards and DLA shipment requirements, ensuring all packaging and labeling comply with federal military logistics protocols. This includes the application of barcoded labels for full traceability throughout the supply chain, precise documentation of shipment details, and end-to-end accountability from origin to delivery. The work must be executed in alignment with defense logistics agency expectations to support operational readiness and inventory management. The contract is classified as a subcontract under NAICS code 488510 and is issued by the Department of Defense through the Maritime Supply Chain ESOC Buys office. The place of performance is designated as Albany, Georgia, with a ZIP code of 31704-0325. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026, with no set-aside provisions indicated. All parties must ensure compliance with the specified technical and procedural standards to meet delivery obligations and avoid contract nonconformance.

Freight Transportation Arrangement

POSTED

about 23 hours ago

DEADLINE

Hazardous Materials Compliance and LabelingThe contract requires compliance with OSHA's Hazard Communication Standard for the identification and labeling of hazardous components, ensuring all materials are properly marked with hazard labels and accompanied by Safety Data Sheets (SDS). All hazardous substances must be reviewed to determine regulatory exemptions, and any materials outside those exemptions must have their labels and SDS prepared and submitted for formal approval prior to use or distribution. The work is structured as a subcontract under NAICS code 541690, focused on specialized compliance services within the Department of Defense’s Maritime Supply Chain ESOC Buys umbrella. Performance is located in Albany, Georgia, with a strict response deadline of August 10, 2026, and the solicitation was posted on July 28, 2026. All deliverables must align strictly with federal regulatory requirements to ensure workplace safety and legal adherence.

Other Scientific and Technical Consulting Services

POSTED

about 23 hours ago

DEADLINE

Hose Assembly Supply and DeliveryThe contract involves the procurement, packaging, labeling, and delivery of a specific hose assembly identified by NSN 4720015712920, which must meet all applicable federal and military standards for performance, durability, and safety. The product is to be shipped FOB origin, meaning responsibility and risk transfer to the buyer once the item leaves the seller’s facility, with final inspection to be conducted at the destination to ensure compliance with required specifications. The item is classified under NAICS code 332994, indicating a focus on other fabricated metal product manufacturing, consistent with the production of specialized military hardware components. This is a subcontract opportunity issued by the Department of Defense through the MARITIME SUPPLY CHAIN ESOC BUYS office, with a place of performance listed in Albany, Georgia, 31704-0325. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026, providing potential vendors a limited window to prepare and submit proposals. All deliveries must adhere to strict military packaging and labeling protocols to ensure traceability, handling integrity, and readiness for immediate deployment. The contract requires full compliance with defense logistics standards, and failure to meet any specification may result in rejection or penalties.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 23 hours ago

DEADLINE

Radioactive Materials Notification (If Applicable)The contract mandates radiological screening of filter assemblies to detect and notify the government if any radioactive materials exceed established regulatory thresholds, in full compliance with FAR 52.223-7 and MIL-STD-129 requirements. All filter assemblies must be inspected and documented to ensure they do not contain radioactive contaminants above permissible levels, and any discovery of such materials must trigger an immediate and formal notification to the contracting agency. This requirement applies to all deliveries under the subcontract and is intended to safeguard personnel, facilities, and the supply chain from potential radiological hazards. The solicitation is classified as a subcontract under NAICS code 541380 and is administered by the Department of Defense through the Maritime Supply Chain ESOC Buys office, with performance required at San Diego, CA 92135-5000. Responses must be submitted by August 10, 2026, with the opportunity posted on July 28, 2026. While no set-aside designation is specified, the contract emphasizes strict adherence to federal and military standards for radiological safety, and all participants must be prepared to provide verifiable testing documentation and notification protocols as part of compliance. No point of contact is listed, and all inquiries must be directed through the official DIBBS platform linked in the solicitation.

Testing Laboratories and Services

POSTED

about 23 hours ago

DEADLINE

Freight and Traceable Shipping ServicesThe contract requires the safe and traceable transportation of a filter assembly to Naval Air Station North Island in San Diego, California, with a strict prohibition against parcel post services. All shipping must comply with standardized freight protocols to ensure accountability, security, and timely delivery. The place of performance is designated with a specific zip code, confirming the exact receiving location, and the shipment must be handled by authorized carriers meeting traceability and handling requirements for government-sensitive materials. Issued under the NAICS code 484220, this subcontract is managed by the Maritime Supply Chain ESOC Buys office within the Department of Defense and was posted on July 28, 2026, with a response deadline of August 10, 2026. Bidders must meet all logistical criteria outlined in the solicitation, including adherence to traceable freight standards and compliance with defense transportation regulations. The offering is accessible via a DIBBS platform link, indicating it is part of a formal defense procurement process requiring formal proposals and verification of shipping capabilities.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 23 hours ago

DEADLINE

Hazardous Materials Handling and PackagingThe contract pertains to the packaging, labeling, and handling of hazardous materials associated with a filter assembly, requiring strict adherence to federal hazard communication standards and the timely submission of safety data sheets. All activities must comply with regulatory requirements for the safe management and transportation of hazardous substances, ensuring proper identification, documentation, and handling procedures are maintained throughout the supply chain. The work is tied to a specific delivery location in San Diego, California, with a zip code of 92135-5000, and falls under the NAICS code 562910, which relates to other waste management services. This is a subcontract awarded by the Department of Defense’s Maritime Supply Chain ESOC Buys office, with a response deadline of August 10, 2026, and the opportunity was posted on July 28, 2026. Participation requires full compliance with federal regulations and the ability to manage hazardous materials in alignment with established safety and reporting protocols.

Remediation Services

POSTED

about 23 hours ago

DEADLINE

Filter Assembly Supply (Electrical Components)The contract calls for the supply and delivery of one electrical filter assembly identified by NSN 5915015686701, fully compliant with U.S. military specifications. This subcontract is issued under the Department of Defense through the Maritime Supply Chain ESOC Buys division, with performance required at a location in San Diego, California, specifically at the 92135-5000 zip code. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026, with the North American Industry Classification System code 334318 indicating it falls under other wiring device manufacturing. All deliverables must meet rigorous defense standards and be delivered to ensure operational readiness. The contract opportunity is accessible via the DIBBS procurement portal for qualified subcontractors interested in fulfilling this requirement for military-grade electrical components.

POSTED

about 23 hours ago

DEADLINE

International Logistics and Sea Transport Coordination

Freight Transportation Arrangement

POSTED

about 23 hours ago

DEADLINE