Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Fixed Capacitor Supply (Electronic Components)

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the supply of 15 units of fixed electronic capacitors identified by the National Stock Number 59100015648509, with all units required to be properly packaged, labeled, and delivered in full compliance with military standards. The components are part of a subcontract under the broader procurement efforts of the Defense Logistics Agency, an agency within the Department of Defense, and are classified under NAICS code 334416, which pertains to semiconductor and other electronic component manufacturing. The contract was posted on June 24, 2026, and performance is expected to meet stringent defense procurement requirements, though specific delivery locations and point of contact details are not provided. All deliverables must adhere to the technical and logistical specifications demanded by military operations to ensure reliability and interoperability.

General Info

15 military-compliant capacitors supplied under DLA subcontract, NAICS 334416, delivered per defense standards.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

334416 - Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE7M5-26-T-234G.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CAPACITOR, FIXED, ELE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJun 24

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of 15 units of fixed electronic capacitors (NSN: 59100015648509), including packaging, labeling, and delivery compliant with military standards.

Similar Contracts

Same NAICS industry code

Purchase Olson Electrics 300k Pad Mount Transformer

Solicitation # 47QSSC27Q0027

Solicitation 47QSSC27Q0027 is a request for quote from the General Services Administration for the purchase, delivery, and testing of one Olsun Electrics 300kVA Cast Coil Transformer. The equipment must be a copper wound, padmount, dry type unit with a NEMA 3R 316 stainless steel enclosure in Munsell Green paint. Technical specifications include a primary voltage of 12000D, secondary voltage of 208Y/120, and the inclusion of three 200 AMP bushing wells. The procurement is designated as brand name, meaning no substitutions will be accepted. The estimated total dollar value is 172,427.48 dollars. The contract will be awarded on an all-or-none basis to the responsible offeror providing the lowest evaluated price, provided they pass administrative compliance. Delivery is FOB Destination to Naval Base San Diego, California. The contractor is required to perform certified post-shipping testing in accordance with IEEE/ANSI standard production tests. Strict adherence to packaging and marking standards is required, specifically Military Standard 129 for military deliveries and Federal Standard 123 for civilian deliveries. To be considered valid, quotes must include the completed RFQ document and a signed MIL-STD 129 compliance document submitted to the primary point of contact by the deadline of December 7, 2026.

Supply Chain Management Contracting Division Gsa/fas/gss/qscb

POSTED

about 3 hours ago

DEADLINE

in about 1 month

Purchase Olsun Electrics 225 KVA Transformer

Solicitation # 47QSSC27Q0028

Solicitation 47QSSC27Q0028 is a request for the purchase, delivery, and testing of one Olsun Electrics 225kVA Cast Coil Transformer. The required unit is a copper wound, padmount, dry type transformer with a NEMA 3R enclosure, 316 stainless mount, and Munsell Green paint, specifically designed for customer unit Pad B4-PS4-T62. The estimated total dollar value for this procurement is 146,844.08. Delivery is specified as FOB Destination, CONUS, with the final destination being Naval Base San Diego, California. The contract will be awarded on a Lowest Price Technically Acceptable (LPTA) basis as an all-or-none award. Because this is a brand name requirement, no substitutions for Olsun Electrics will be accepted. To be considered valid, quotes must include the completed RFQ document and a signed MIL-STD 129 compliance document. Technical requirements include IEEE/ANSI Standard production tests with certified testing performed post-shipping. Offerors must also be registered in GSA's Order Management Services (OMS) Vendor Portal or capable of receiving orders via Electronic Data Interchange (EDI) prior to award. The response deadline is December 7, 2026.

Supply Chain Management Contracting Division Gsa/fas/gss/qscb

POSTED

about 3 hours ago

DEADLINE

in about 1 month

Supply of Fixed Wire Wound Resistors (NSN 5905-01-061-5801)This subcontract involves the supply of five fixed wire wound resistors, identified by NSN 5905-01-061-5801, for prime contractors supporting DLA Weapons Support Maritime Supply Chain projects. The components must strictly adhere to DLA Master List requirements RP001 and RA001, with packaging and marking following MIL-STD-2073-1E and MIL-STD-129 standards respectively. The contract requires full compliance with the Buy American Act and the Berry Amendment. Delivery of the five units is specified as FOB Origin to Hill AFB, Utah. The opportunity is managed by the Department of Defense under NAICS code 334416, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 22 hours ago

DEADLINE

Supply of Fixed Wire Wound ResistorsThis subcontract involves the supply of five fixed wire wound resistors for prime contractors supporting the Department of Defense DLA Weapons Support Maritime Supply Chain. The contractor is responsible for manufacturing or sourcing resistors that strictly adhere to NSN 5905010615795 specifications, with delivery terms set as FOB Origin to Hill AFB. Compliance with rigorous military and industry standards is required, including marking per MIL-STD-129 and unit package marking for lead finish according to IPC/JEDEC J-STD-609. Additionally, all items must be packaged in accordance with MIL-STD-2073-1E. The opportunity falls under NAICS code 334416, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 22 hours ago

DEADLINE

Supply of Fixed Wire Wound Resistors (NSN 5905010617402)This subcontract involves the manufacture or procurement of five fixed wire wound resistors matching NSN 5905010617402 for the Department of Defense, specifically supporting DLA Weapons Support Maritime Supply Chain projects. The contractor is responsible for ensuring that lead finish markings adhere to IPC/JEDEC J-STD-609 standards and that all packaging and marking comply with MIL-STD-2073-1E and MIL-STD-129. The project requires strict adherence to the Buy American Act and the Berry Amendment. Final delivery of the units is to be made to Hill AFB in Utah. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026, under NAICS code 334416.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 22 hours ago

DEADLINE

Supply of Fixed Wire Wound Resistors (NSN 5905010619534)This subcontract involves the supply of five fixed wire wound resistors for prime contractors supporting DLA supply contracts. The components must strictly adhere to NSN 5905010619534 and DLA Master List RA001 requirements. Technical compliance is mandatory regarding lead finish per IPC/JEDEC J-STD-609, packaging according to MIL-STD-2073-1E, and marking standards as defined by MIL-STD-129. The contract is issued by the Department of Defense under the DLA Weapons Support Maritime Supply Chain ESOC Buys, with performance taking place at Hill AFB. All deliverables must comply with the Buy American Act. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026, falling under NAICS code 334416.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 22 hours ago

DEADLINE

Fixed Wire Wound Resistor ManufacturingThis subcontract involves the manufacture and supply of three fixed wire wound resistors for prime contractors supporting the DLA Weapons Support Active Devices Division. The resistors must be produced using precision wire winding equipment to meet the specific electrical tolerances and physical dimensions defined by NSN 5905-01-061-9574. Strict adherence to DLA Technical and Quality Requirements RA001, as well as marking standards RQ011 and RQ017, is mandatory for all deliverables. The project is categorized under NAICS code 334416 and will be performed in Tracy, California. To be eligible, the provider must ensure full compliance with the Buy American Act and DFARS cybersecurity regulations. The solicitation was posted on October 27, 2026, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 22 hours ago

DEADLINE

Fixed Electrolytic Capacitor Supplier (MIL-PRF-39003)This subcontract involves the supply of fixed electrolytic capacitors to prime contractors supporting the DLA Weapons Support Active Devices Division. The scope of work requires the manufacture or sourcing of part number M39003/01-8159, identified by NSN 5910013264283, in strict accordance with MIL-PRF-39003/1L Rev L and MIL-PRF-39003P Supp 1 Rev P. The supplier must maintain qualified source status for MIL-PRF-39003 to be eligible for the contract. Technical requirements include applying lead finish markings per IPC/JEDEC J-STD-609 and utilizing MIL-STD-2073-1E packaging standards. The final delivery consists of eight capacitors marked according to MIL-STD-129, with the place of performance located at Robins Air Force Base. Interested parties must submit responses by November 9, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 22 hours ago

DEADLINE

Supply of Fixed Wire Wound Inductive Resistors (NSN 5905-01-061-5803)This subcontract involves the manufacture or procurement of five fixed, wire wound inductive resistors under NSN 5905-01-061-5803 for the Department of Defense, specifically supporting DLA Weapons Support Maritime Supply Chain projects. The contractor is responsible for ensuring all components meet strict technical specifications, including lead finish markings per IPC/JEDEC J-STD-609 and general marking requirements per MIL-STD-129. Packaging must adhere to MIL-STD-2073-1E and RP001 standards. The agreement requires full compliance with the Buy American Act and DFARS Cybersecurity standards. The final deliverables are to be shipped FOB Origin to Hill AFB, Utah. This opportunity falls under NAICS code 334416, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 22 hours ago

DEADLINE

Supplier of Fixed Ceramic Dielectric CapacitorsThis subcontract involves the supply of two fixed ceramic dielectric capacitors for prime contractors supporting the Department of Defense DLA Weapons Support Maritime Supply Chain. The required components must match NSN 5910015328148 and L3 Technologies part numbers 90-313-1 and G-3617. Performance will take place in Fallon, Nevada, under NAICS code 334416. The supplier must ensure strict adherence to IPC/JEDEC J-STD-609 and 29 CFR 1910.1200 standards. Additionally, the contract mandates full compliance with the Buy American Act and the Berry Amendment, specifically following DLA requirements RP001, RA001, RQ011, and RQ017. The response deadline for this opportunity is November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 22 hours ago

DEADLINE

Supply of Fixed Wire Wound ResistorsThis subcontract involves the procurement or manufacture of 5,000 fixed wire wound and inductive wire wound resistors for the Department of Defense, specifically supporting DLA Weapons Support Maritime Supply Chain projects. The required components must match NSN 5905010617409 and part number TS.5WR5.2KOHMSPORM1PCT, with lead finishes strictly complying with IPC/JEDEC J-STD standards. All deliverables must adhere to MIL-STD-2073-1E and MIL-STD-129 for packaging and marking. The place of performance is designated as Hill AFB, and the contract falls under NAICS code 334416. The response deadline for this requirement is November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 22 hours ago

DEADLINE

Manufacturing and Supply of Noninductive Wire Wound ResistorsThis subcontract involves the manufacturing and supply of fixed, wire wound, noninductive resistors for prime contractors supporting the Department of Defense under the DLA Weapons Support Maritime Supply Chain. The contractor is responsible for producing resistors that adhere to MIL-PRF-39009/2C(3) and MIL-PRF-39009E(5) specifications, with lead finish markings applied according to IPC/JEDEC J-STD-609. The specific deliverable is packaged resistors under NSN 5905015277634. The project is categorized under NAICS code 334416 and requires strict compliance with DFARS 252.204-7012 and 252.204-7009 regulations. Performance for this contract will take place in Tobyhanna, Pennsylvania. Interested parties must respond by the deadline of November 9, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 22 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supplier of Specialized Material (NSN 0001S00000053)This subcontract involves the procurement or manufacture of one unit of specialized hardware identified by NSN/MATERIAL 0001S00000053 to support primes delivering contracts for the Defense Logistics Agency. The selected supplier must ensure all items meet strict DLA technical and quality standards and adhere to RP001 DLA Packaging Requirements for Procurement. The opportunity is categorized under NAICS code 423830 and was posted on October 27, 2026, with a response deadline of November 9, 2026. This requirement is managed through the Department of Defense for the Defense Logistics Agency.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 22 hours ago

DEADLINE

Supplier of Cross Test LevelsThis subcontract involves the procurement or manufacture of two units of the Level, Cross Test, identified by NSN 5210-00-863-5651, to support prime contractors delivering for the Defense Logistics Agency. The supplier is required to ensure all tools are produced in strict compliance with the DLA Master List of Technical and Quality Requirements. Operational requirements include adhering to RP001 DLA Packaging Requirements for all shipments and submitting necessary receiving reports through the Wide Area Workflow system. The contract falls under NAICS code 423830 and is managed under the Department of Defense.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 22 hours ago

DEADLINE

Supply of Identification Markers (NSN 7690016685478)This subcontract involves the manufacture or procurement of three identification markers under NSN 7690016685478 for prime contractors supporting Defense Logistics Agency supply contracts for the USS GABRIELLE GIFFORDS (LCS 10). The selected provider must ensure all units are marked according to MIL-STD-129 with Special Marking Code 32 and packaged in compliance with MIL-STD-2073-1E. The contract falls under NAICS code 339999 and requires strict adherence to DFARS 252.204-7012 regarding the safeguarding of covered defense information. Performance will take place in FPO 96671, with the final deliverable being three properly marked and packaged identification markers.

All Other Miscellaneous Manufacturing

POSTED

about 22 hours ago

DEADLINE

Supply of MIL-PRF-85285 Polyurethane Coating KitThis subcontract involves the supply of a high-solids, multi-component semigloss gray polyurethane coating for prime contractors supporting Defense Logistics Agency Troop Support. The coating must consist of a pigmented polyester resin solvent and a clear aliphatic isocyanate, matching color 26231 per FED-STD-595. All materials must be produced by a QPL approved manufacturer in accordance with MIL-PRF-85285 and packaged according to MIL-STD-129. The scope of work requires the delivery of one coating kit to China Lake, California. This procurement falls under NAICS code 325510 and is managed by the Department of Defense. Interested parties should note the response deadline of October 30, 2026.

Paint and Coating Manufacturing

POSTED

about 22 hours ago

DEADLINE

Vaneaxial Fan and Impeller Manufacturer/SupplierThis subcontract involves the manufacture or procurement of one Vaneaxial Fan and Axial Fan Impeller to support prime contractors fulfilling Defense Logistics Agency supply contracts. The supplier is required to provide hardware that strictly adheres to the technical data specifications for NSN 4140016182401. All supplied components must be of domestic origin and must undergo rigorous quality control to ensure full compliance with RP001 DLA Packaging Requirements and MIL-STD-129 marking standards. The final deliverable consists of one fully packaged and marked fan and impeller assembly. This requirement falls under NAICS code 333998 and is managed by the Department of Defense. Interested parties must submit their responses by November 9, 2026, for performance located at FPO 96693.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 22 hours ago

DEADLINE

Traceable Freight Transport for Armor PlateThis subcontract involves the transportation and delivery of armor plates for prime contractors supporting Defense Logistics Agency Troop Support Construction and Equipment Metals projects. The selected provider is responsible for hauling heavy metal plating using the fastest traceable methods available, specifically excluding the use of parcel post. For international shipments, the contractor must provide comprehensive ocean bills of lading that include the vessel flag and gross weight. Additionally, the provider is required to submit all necessary proof of delivery and tracking documentation to ensure full visibility of the shipments. The work is associated with NAICS code 484220 and is performed under the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 22 hours ago

DEADLINE

Supply of Armor Plate (NSN 9535-01-611-9013)This subcontract involves the supply of specialized armor plating under NSN 9535-01-611-9013 for prime contractors working on Defense Logistics Agency Troop Support Construction and Equipment projects. The selected provider is responsible for manufacturing or sourcing the armor plate using precision cutting and finishing equipment to ensure strict adherence to technical specifications. All deliverables must comply with MIL-STD-2073-1E packaging standards, specifically requiring the use of a 3 x 2-1/2 inch stiffener to secure items. The contract mandates a delivery timeline of 30 days after the order is placed, with performance centered in the 85613-6000 zip code area.

Fabricated Structural Metal Manufacturing

POSTED

about 22 hours ago

DEADLINE

Defense Logistics Freight Forwarding (USA to Germany)This subcontract involves the specialized transport of aerospace components for prime contractors under Defense Logistics Agency contracts. The scope of work requires the contractor to coordinate the pickup of materials from Eddystone, Pennsylvania, manage all necessary international customs clearance, and ensure final delivery to the NAEW & CF E-3A Component hangar located in Geilenkirchen, Germany. Due to the nature of the cargo, the provider must possess demonstrated experience in international military hardware logistics. The contract is categorized under NAICS code 488510 and mandates a full door-to-door delivery service from the United States to the final overseas destination.

Freight Transportation Arrangement

POSTED

about 22 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on Defense Logistics Agency aerospace contracts. The scope of work involves performing specialized military packaging and marking to ensure components are shipment-ready for international transit. All activities must strictly adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The contractor is responsible for ensuring that all hazardous material identification and labeling comply with FAR 52.223-3 and DFARS 252.223-7001. This requirement falls under NAICS code 561910. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.

Packaging and Labeling Services

POSTED

about 22 hours ago

DEADLINE

Aerospace Sling Assembly FabricationThis subcontract involves the manufacture and supply of one Sling Assembly for prime contractors supporting Defense Logistics Agency aerospace procurement projects. The contractor is responsible for fabricating the assembly according to Part Number D29810-101 and NSN 4240-01-128-7995, ensuring full adherence to the DLA Master List of Technical and Quality Requirements. The project mandates strict compliance with Buy American requirements and DFARS 252.204-7012 regarding NIST SP 800-171 cybersecurity standards. Interested parties must submit responses by November 9, 2026, for this Department of Defense requirement categorized under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

Military Grade Packaging and International Freight ForwarderThis subcontract involves providing specialized military grade packaging and international freight forwarding services for prime contractors under Defense Logistics Agency supply contracts. The scope of work requires strict adherence to MIL-STD-2073-1E and DLA RP001 for packaging, as well as MIL-STD-129 for marking and labeling. The contractor must utilize MIL-SPEC materials and possess the necessary international freight licenses to ensure compliance with military standards. The logistical requirements include managing FOB Destination shipping and customs brokerage to facilitate the delivery of a cabinet to Yokosuka Naval Base in Japan. Performance is centered around the Department of Defense and the Defense Logistics Agency, with the final delivery accepted at the destination. The response deadline for this opportunity is November 9, 2026.

Freight Transportation Arrangement

POSTED

about 22 hours ago

DEADLINE

Small Parts Cabinet ManufacturerThis subcontract involves the manufacture of a small parts cabinet for prime contractors supporting the Defense Logistics Agency. The selected manufacturer must fabricate one completed unit in strict accordance with Basic Drawing 59678 11023404 Revision C and Reference Drawing 19200 11023404. Specific requirements include applying designated color modifications and removing all source identifications to ensure the final product matches NSN 7125012251202. The project requires a contractor equipped with metal fabrication and industrial powder coating capabilities. All work must comply with the Buy American Act. The performance location is designated as FPO 96349, and the response deadline for this opportunity is November 9, 2026.

Sheet Metal Work Manufacturing

POSTED

about 22 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Power Transformer Manufacturing and Supply

Defense Logistics Agency

POSTED

DEADLINE

Electrical Coil Manufacturing and Supply

Defense Logistics Agency

POSTED

DEADLINE

Fiber Optic Connector Assembly Supply

Defense Logistics Agency

POSTED

DEADLINE

Supply of Electronic Amplifier Units (Intermediary Grade)

Defense Logistics Agency

POSTED

DEADLINE

Resistor Assembly Manufacturing and Delivery

Defense Logistics Agency

POSTED

DEADLINE

Thermal Resistor Supply (Electronic Components Manufacturing)

Defense Logistics Agency

POSTED

DEADLINE

CAPACITOR, FIXED, ELE

Solicitation # SPE7M5-26-T-234G

Defense Logistics Agency

POSTED

DEADLINE

AMPLIFIER, INTERMEDI

Solicitation # SPE7M5-26-T-079Q

Defense Logistics Agency

POSTED

DEADLINE

RESISTOR, FIXED, WIRE

Solicitation # SPE7M5-26-T-280K

ACTIVE DEVICES DIVISION

POSTED

CLOSED

TRANSFORMER, DIFFERE

Solicitation # SPE7M1-26-U-3448

MARITIME SUPPLY CHAIN

POSTED

CLOSED

RESISTOR, VARIABLE

Solicitation # SPE7M3-26-V-2577

Defense Logistics Agency

POSTED

DEADLINE

RESISTOR, VARIABLE, H

Solicitation # SPE7M5-26-T-026D

Defense Logistics Agency

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS