Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

FIXTURE, AIRCRAFT MA

Active
SPE4A5-26-T-310CFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

332710 - Machine ShopsView NAICS

Place of Performance

P O BOX 99190, YUMA, AZ, 85365, US

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-310C.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
Hien-Van Trinh
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
FIXTURE,AIRCRAFT MA
FIXTURE,AIRCRAFT MA
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RD002, COVERED DEFENSE INFORMATION APPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
SEYER INDUSTRIES, INC. 19494 P/N 449-234-001-103
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A5-26-T-310C
SECTION B
PR: 7017591703 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017591703 0001 EA 1.000
NSN/MATERIAL:4920016092644
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
R57082
MALS 13 REAR SUPPLY
P O BOX 99190
YUMA AZ 85365
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
R57082
MALS 13 REAR SUPPLY
BLDG 328 MARINE CORPS AIR STATION
328 E. SPEARS ST.
YUMA AZ 85365
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) R5708253463283
RDD: 777
PROJ: BK0 TP 1
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A4A DIST: 9B ADV: FC: 7L
Need Ship Date:00/00/0000
SPE4A5-26-T-310C
SECTION B
PR: 7017591703 PRLI: 0001 CONT’D
Original Required Delivery Date:12/18/2025
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7017493311 0001 EA 2.000
NSN/MATERIAL:4920016092644
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT PKGING DATA-QUP:001 WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
R09808
MARINE AVIATION LOGISTICS SQDN 39
MALS-39 MAG-39 3D MAW
PO BOX 555761
CAMP PENDLETON CA 92055-5761
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
SPE4A5-26-T-310C
SECTION B
PR: 7017493311 PRLI: 0001 CONT’D
FREIGHT SHIPPING ADDRESS:
R09808
MARINE AVIATION LOGISTICS SQDN 39
MALS-39 SUPPLY MAG-39 3D MAW
BLDG 23122 SUPPLY CIRCLE
CAMP PENDLETON CA 92055-5761
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) R0980861760264
RDD: 777
PROJ: AE5 TP 2
SUPP ADD: YSTOCK SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: V9B ADV: FC: KZ
Need Ship Date:00/00/0000 Original Required Delivery Date:07/13/2026
SPE4A5-26-T-310C NSN/Part Number: 4920-01-609-2644 Quantity: 1 EA Purchase Request: 7017493311QTY: 2 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332710
New
DIBBS
NRP, PRESSURE GAUGE
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332710
New
Federal
49--CABLE ASSY,HIGH VOL, IN REPAIR/MODIFICATION OFThis contract solicits repair services for three High Voltage Cable Assemblies, identified by NSN 4920-015277796 and Part Number 0060A-12, under a firm fixed price structure. The repair must be performed in accordance with the latest approved technical publications and result in a Ready for Issue (RFI) condition, ensuring full operational reliability. The contractor is required to meet a strict 125-day Return to Delivery Turnaround Time from physical receipt of the asset, as logged in the Commercial Asset Visibility system, and maintain a monthly throughput capacity that must be specified in the proposal. Induction of assets is valid for 365 days post-award, after which no repairs are authorized without explicit bilateral agreement. Repair sources must be clearly identified, with work to be conducted at the designated facility of Caton Connector Corporation in Kingston, MA, and any change to the repair location, source, or technical procedures requires prior written approval from the Procuring Contracting Officer. The contractor must maintain ISO 9001/SAE AS9100 compliance, adhere to a rigorous calibration system, and implement a configuration management plan aligned with NAVSUP WSS standards. All parts used must be new unless otherwise approved in writing, and cannibalization is strictly prohibited without specific authorization from NAVSUP WSS and the Basic Design Engineer. The contract incorporates mandatory federal requirements including Buy American and Free Trade Agreements provisions, a 12-month warranty covering defects discovered within 60 days of detection, and the mandatory use of Workflow Pro’s Assist Module for payment processing. Invoices must be submitted via the specified combo type and source code with associated Navy funding details. The contractor must comply with Security Prohibitions and Exclusions, Equal Opportunity regulations, and the Navy’s requirements regarding AbilityOne contractor information release. Items determined to be Beyond Economical Repair, Beyond Repair, or Missing on Induction require formal DCMA concurrence and written authorization from the Procuring Contracting Officer before any action is taken, and all such determinations must be documented and submitted for review. Government Furnished Property is not provided; the contractor bears full responsibility for tooling, test equipment, materials, and facility operations. Final acceptance requires government inspection and approval, with reimbursement adjustments subject to negotiation if turnaround times are not met. All contractual documents are considered issued upon electronic transmission, and proposals must include full Source Approval documentation from NAVSUP WSS to be eligible for award.
Navsup Weapon Systems Support

POSTED

about 22 hours ago

DEADLINE

in 27 days
View Details
NAICS: 332710
New
SLED
Precision Machining and Fabrication ServicesDallas Area Rapid Transit is seeking qualified subcontractors to provide precision machining, welding, and fabrication services for metal components according to detailed engineering drawings and technical specifications. The contract emphasizes adherence to exact dimensional tolerances and material requirements to ensure components meet rigorous functional and safety standards for transit-related applications. Responses must be submitted by July 29, 2026, and the work falls under NAICS code 332710 for metal fabrication services, with performance expected to align with the agency’s operational infrastructureneeds. While no specific location is stated for performance or office address, the contract is issued under a subcontract structure with no designated set-aside classification, opening eligibility to a broad range of capable vendors. Interested parties must access the opportunity through the provided online portal to review full requirements and submit proposals before the deadline.
Dallas Area Rapid Transit

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 332710
New
DIBBS
Precision Machined Adapter Manufacturing (Pipe-to-Hose & Flange-to-Hose)The contract calls for the manufacture of 177 precision-machined straight adapters designed to connect pipe-to-hose and flange-to-hose configurations in military fluid handling systems, strictly adhering to the MIL-DTL-24356B specification. Each component must meet exacting dimensional tolerances, material composition standards, and performance criteria to ensure reliability and safety in defense applications. The work is classified as a total small business set-aside under the SBA program, restricted to small businesses as defined by the North American Industry Classification System code 332710, which covers metal forging and stamping. The performance location is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating where the manufactured parts must be delivered and potentially inspected. The solicitation was posted on July 26, 2026, and responses are required by August 6, 2026, allowing a ten-day window for interested small businesses to submit proposals under this subcontract opportunity issued by the Department of Defense’s Fluid Handling Division.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 332710
New
DIBBS
Precision Machining and Assembly of Scissors AssemblyThe contract entails the precision machining and final assembly of the SCISSORS ASSY, MAIN to meet stringent military specifications, ensuring compliance with exacting dimensional tolerances, approved material standards, and rigorous functional performance criteria tailored to AS9003, with quality management aligned to ISO 9001 as adapted for AS9003. The work must be performed at the designated place of performance in New Cumberland, Pennsylvania, with all deliverables subject to verification under the required aerospace and defense quality frameworks. The subcontract is structured as a total small business set-aside under SBA regulations, reserved exclusively for small businesses as defined by FAR 19.5, and is classified under NAICS code 332710 for Machine Shops; Turned Product; and Screw, Nut, and Bolt Manufacturing. The solicitation was posted on July 26, 2026, with responses due by August 3, 2026, and is issued by the ASC Supplier Oper OEM Division under the Department of Defense. While no specific point of contact is provided, the procurement is accessible through the DIBBS platform for prospective bidders. The contract requires full adherence to defense-grade manufacturing protocols, including traceability of materials, controlled inspection processes, and documented conformance to military requirements. All work must be completed by a certified small business entity capable of executing complex precision assembly under tight quality controls and scheduled delivery timelines.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332710
New
DIBBS
Precision Machining of Steering Column ShaftThe contract specifies the precision machining, heat treatment, and surface finishing of a hardened steel steering column shaft intended for use in defense vehicles, with all work required to comply with MIL-STD and DLA technical specifications. The work must meet stringent military standards for durability, dimensional accuracy, and performance under extreme operational conditions. The contract is structured as a subcontract under a Total Small Business Set-Aside, designated under NAICS code 332710, ensuring eligibility is limited to small businesses as defined by the SBA. All activities must be performed in accordance with defense manufacturing protocols to ensure compatibility and reliability in mission-critical vehicle systems. The solicitation was posted on July 26, 2026, with a strict response deadline of August 10, 2026, and is managed by the Strategic Acquisition Program Directorate under the Department of Defense. The place of performance and point of contact details are unspecified, but full compliance with technical and regulatory requirements is mandatory. The contract does not include a solicitation number for reference, and bidders must rely on the official DIBBS portal link for submission details. Completion of this work demands expertise in hardened steel processing and adherence to defense-grade quality control measures without exception.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 332710
New
DIBBS
Precision Metal Shim ManufacturingThe contract requires the manufacture of a single precision metal shim to meet exacting military specifications, ensuring strict adherence to dimensional tolerances, approved material composition, and verified performance standards suitable for defense applications. The work must align with national defense requirements and be produced in accordance with technical and quality controls typical of military-grade components, with no allowances for deviation in critical parameters. This is a subcontract under the NAICS code 332710, issued by the Department of Defense through the LAND SUPPLY CHAIN organization, with performance required at FORT STEWART, Georgia, 31314-0000. The solicitation was posted on July 26, 2026, and responses must be submitted by August 6, 2026, with the opportunity available through the DIBBS platform. The contract does not specify any set-aside provisions or small business preferences, and no point of contact information is provided in the data, though full details can be accessed via the listed UI link.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 332710
New
DIBBS
Stainless Steel Precision Component FabricationThe contract calls for the fabrication of precision-machined stainless steel components in Grade 304 specifically for use in spinal needles, including shafts and hubs that must conform to stringent medical-grade tolerances and surface finish standards to ensure safety and performance in clinical applications. The work is classified under NAICS code 332710, indicating it falls under the category of forgings and stampings, and is structured as a subcontract pursuant to the Department of Defense’s Medical Supply Chain initiative. Performance of the contract is required at Fort Bragg with a zip code of 28310, and all delivered components must meet established specifications for biocompatibility, dimensional accuracy, and finish quality to support integral use in surgical procedures. The solicitation was posted on July 26, 2026, with a firm deadline for responses set for August 3, 2026, providing potential suppliers a limited window to prepare and submit proposals. While no set-aside designation is specified, the procurement is governed under the Defense Logistics Agency’s DIBBS system and will be evaluated based on technical compliance, quality assurance protocols, and the ability to consistently deliver components at scale. The requirement reflects a critical supply chain need within military medical operations, emphasizing reliability, traceability, and adherence to medical device manufacturing benchmarks without deviation.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332710
New
DIBBS
Precision Machined Diaphragm ManufacturingThe contract requires the manufacture of ten flat flange diaphragms to exact military NSN and technical specifications, encompassing precision machining, full material certification, rigorous quality inspection, secure packaging, and timely delivery within 48 days of contract award. All work must adhere to stringent defense standards, ensuring the components meet the functional and durability requirements for military applications. The place of performance is specified as Tracy, California, with a zip code of 95304-5000, indicating where the finished products must be delivered or where manufacturing must occur. The NAICS code 332710 confirms this is a precision machining and metal finishing activity, aligning with defense supply chain expectations. This is a subcontract under the Department of Defense, managed by the Construction & Equipment Manu & Con organization, and was posted on July 26, 2026, with a response deadline of August 6, 2026. While no set-aside status is indicated, the contract is part of the DLA’s procurement system and must be submitted via the DIBBS platform using the provided solicitation link. Contractors are expected to demonstrate proven capability in producing high-tolerance diaphragm components for military use, including compliance with quality assurance protocols and timely execution under tight deadlines. Failure to meet any technical or delivery requirements may result in contract default or non-payment.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 332710
New
DIBBS
Precision Machined Setscrew ManufacturingThe contract calls for the manufacture of 190 precision setscrews to military specifications, encompassing all stages of production including material sourcing, precision machining, heat treatment, surface finishing, and rigorous inspection to ensure compliance with defense standards. The work must be completed in accordance with technical and quality requirements typical of military-grade components, with particular emphasis on dimensional accuracy, material integrity, and performance reliability under operational conditions. The place of performance is designated as Hill Air Force Base, Utah, with delivery expected to meet the stringent demands of the Department of Defense’s Commodity Division. This subcontract opportunity, classified under NAICS code 332710 for machine shops and precision manufacturing, was posted on July 26, 2026, with a response deadline of August 3, 2026. The effort is part of a broader procurement initiative by the ASC Commodities Division to secure critical fastener components for defense systems, and interested parties must submit proposals that demonstrate capability in meeting exacting military standards through proven manufacturing processes and quality controls. All delivered items will be subject to acceptance testing at the designated DoD installation, and contractors must be prepared to supply documentation and traceability records for materials and processes throughout production.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332710
New
DIBBS
NRP, PRESSURE GAUGEThe contract pertains to the procurement of 19 units of an NRP pressure gauge identified by NSN 4920-01-599-1161, issued under solicitation SPE4A5-26-T-308Z by the Department of Defense’s DLA Aviation, ASC Supplier Oper OEM Division. The contract is a simplified acquisition with a firm-fixed-price structure, totaling $361.00 at $19.000 per unit, with zero variance allowed in quantity. Delivery is required FOB ORIGIN within 62 days of order, with inspection and acceptance occurring at the destination facility located at DDSP New Cumberland, Pennsylvania. All items must be packaged in accordance with ASTM D3951, but DLA’s Master List of Technical and Quality Requirements takes precedence over this standard, and palletization must follow RP001. Marking and labeling shall conform to MIL-STD-129, including proper barcoding and hazardous materials identification, with the Unit of Issue and Quantity per Unit Pack strictly as specified in the contract. Quality assurance requires the use of MIL-STD-1916 or ASQ H1331, Table 1 for sampling unless otherwise directed, mandating a zero-defect acceptance criterion for all lots—no non-conformances permitted unless explicitly modified by contract text. Critical, major, and minor attributes are linked to verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, superseding any conflicting specifications. Special requirements include adherence to NIST SP 800-171 for safeguarding covered defense information, with mandatory cyber incident reporting within 72 hours; contractors must also comply with DFARS clauses related to hazardous material labeling, radioactive material notification, and trafficking in persons, employment eligibility, and sustainable procurement. Invoicing must be submitted electronically via WAWF, and the contractor must be registered in SAM. The solicitation mandates electronic submission exclusively through DIBBS, and the contract incorporates numerous FAR and DFARS clauses, including deviations for cybersecurity, equal opportunity, and payment provisions, all of which must be fully implemented. The need ship date is set for April 27, 2026, with an original required delivery date of April 4, 2026, and all documentation
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332710
New
International
Precision Machining and Fabrication for Pump ComponentsPetrojam Limited, acting on behalf of the Government of Jamaica, is seeking a subcontractor to supply and precision fabricate custom pump components including impellers, shafts, seals, and housings in full compliance with OEM technical specifications. The work requires advanced machining capabilities using both CNC and manual processes to ensure exact dimensional accuracy, material integrity, and performance reliability for critical pump applications. The contract is classified under NAICS code 332710, indicating it falls within the mold and die manufacturing sector, and is targeted for execution at an undisclosed location within Jamaica. The opportunity was posted on July 25, 2026, and is not subject to any specific set-aside provisions. All components must meet stringent quality standards and be delivered in accordance with the OEM’s design, tolerances, and material requirements to support operational needs in industrial or governmental infrastructure.
Petrojam Limited

POSTED

3 days ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Other Electronic Component Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
WASHER, VANEThe contract pertains to the procurement of a commercial off-the-shelf washer, vane, identified by part number 2311146-1 and NSN 5310-01-602-6673, with a quantity of 14 units to be delivered FOB origin. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. The item is exempt from Item Unique Identification per DFARS 252.211-7003(c)(1)(i). Sampling inspection must comply with MIL-STD-1916 or ASQ H1331 Table 1, using zero non-conformances for acceptance unless otherwise specified, with attribute verification levels assigned as VII, IV, and II for critical, major, and minor characteristics respectively. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required and palletization following DLA packaging standards. Delivery is due within 171 days to the designated receive warehouse in Tracy, California, with no variance allowed in quantity. The contract does not specify a need for supplier manufacturing, but non-manufacturers must meet tailored higher-level quality requirements. Original delivery was required by June 13, 2027, though the need ship date is set for January 3, 2027. Inspection and acceptance occur at destination, and transportation logistics are aligned with DLA procedural notes C19 and C20. The procurement is under solicitation SPE4A5-26-T-280G, issued by the Department of Defense’s ASC Supplier Oper OEM Division, with Jessica Baake as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334513
New
DIBBS
SENSOR, AMBIENT TEMP
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
GAGE, PRESSURE, DIAL IND
Other Measuring and Controlling Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
ROPE, WIRE
Other Fabricated Wire Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333611
New
DIBBS
VANE ASSY, COMPR 9THThe contract is for the procurement of two units of the Vane Assembly, Compressor 9th, identified by NSN 2835005557731 and part number 6876109 from Rolls-Royce Corporation, with delivery required FOB origin within five days of award, and no later than July 21, 2026. The item is delivered to the General Depot of Naval Supplies in Kaohsiung, Taiwan, and must comply with comprehensive military packaging standards per MIL-STD-2073-1E, Level B, using Packaging Code Q, Unit Container E5, and Intermediate Container E5 with AAA quantity, while preserving the item using CLNG/DRY method 10 with no preservation material. Marking must follow MIL-STD-129, including bare item marking as required by RQ017, with no special marking needed and Item Unique Identification explicitly waived under DFARS 252.211-7003. Sampling for inspection must adhere to MIL-STD-1916 or ASQ H1331 Table 1 using zero non-conformances unless otherwise specified; unspecified attributes are treated as major, and MIL-STD-105/ASQ Z1.4 may be used only for sample sizing, not acceptance. The contract prohibits the intentional addition or direct contact of mercury or mercury-containing compounds except in functional applications such as batteries, lighting, sensors, weapon systems, or NAVSEA-specified chemical reagents, with portable fluorescent lamps and instruments requiring shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. The contractor must comply with cybersecurity requirements per CMMC Level 2 Self-Assessment, NIST SP 800-171 DOD Assessment Requirements, and the safeguarding of covered defense information under 252.204-7012, alongside strict electronic invoicing via WAWF, avoidance of hexavalent chromium, and exclusion of items sourced from Communist Chinese military companies. Offerors must validate their size status, provide a UEI or CAGE code if applicable, and disclose any covered telecommunications equipment or services under 252.204-7017. Payment is to be processed electronically, and all contractual clauses, including equal opportunity, combating trafficking, employment verification, sustainable products, and small business subcontractor payment acceleration
Turbine and Turbine Generator Set Units Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334512
New
DIBBS
GAGE, PRESSURE, DIAL
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
CRANK ASSEMBLY, PROB
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
ADAPTER ASSEMBLY, IN
Other Electronic Component Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
BEZEL, INSTRUMENT MO
Other Measuring and Controlling Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 314994
New
DIBBS
LINK, CHAIN, ENDThis contract pertains to the procurement of a link, chain, and end component identified by NSN 4010-01-037-5328, with a quantity of 20 units required under solicitation SPE4A5-26-T-295V. The item is designated as a critical application component, with delivery due in 20 days from the award, FOB origin, and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and marking must follow MIL-STD-129, with no special marking required. The delivery address is DLA Distribution San Diego, and the unit of issue is each (EA) at a unit price of $20.00, with no variance permitted in quantity. The contract explicitly prohibits the intentional use of mercury or mercury-containing compounds in the supplied hardware except for specific exceptions such as batteries, fluorescent lights, sensors, or chemical reagents approved by NAVSEA, with portable devices requiring dual containment for mercury safety. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331 unless otherwise specified, and zero non-conformances mandated unless contractually stated otherwise. Configuration changes must follow Engineering Change Proposal procedures, and source approval requires full documentation per RC001. The item may require casting or forging, and vendors must submit a Casting and Forging Assistance Request if special tooling is needed. The component is sourced from Crosby Group Inc. with CAGE 75535 under part number A-342-5/8, and a secondary reference to Oshkosh Defense LLC CAGE 75Q65 part number 12601339 is included for international purposes only. Compliance with DLA packaging standards RP001 and palletization rules is mandatory, and all documentation must adhere to the referenced standards and procedures outlined in the contract.
Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334519
New
DIBBS
MAGNETIC INSPECTION
Other Measuring and Controlling Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details