Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

FIXTURE, FLARING, MIDFRA

Active
SPE4A5-26-T-312JFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a FIXTURE, FLARING, MIDFRAME with NSN 4920-01-237-9607 and part number 21C7771G01, quantity of one unit, under solicitation SPE4A5-26-T-312J. Delivery is required in 347 days with FOB origin terms, and inspection and acceptance occur at the destination. The item has no shelf life requirement. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards, including ASTM D3951 for packaging. Packaging must conform to MIL-STD-129 and DLA Packaging Requirements, with palletization following RP001. Unit of issue is each, with zero variance allowed in quantity. The supplier must comply with sampling requirements per MIL-STD-1916 or ASQ H1331, Table 1, using zero non-conformances unless otherwise stipulated, and attributes must be verified at specified levels. Cybersecurity requirements under CMMC Level 2 are satisfied via self-assessment, with DFARS 252.211-7003(c)(1)(i) applicable. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation protocols are subject to DLAD Proc Notes C19 and C20. The required ship date is July 19, 2027, with the original delivery date set for October 14, 2026. The contract is issued by the Department of Defense, ASC Supplier Oper OEM Division, with Hien-Van Trinh as the primary point of contact.

General Info

Procure one flaring midframe fixture, deliver by July 19, 2027, to New Cumberland, PA, per DLA specs and CMMC Level 2.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

332710 - Machine ShopsView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-312J.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
Hien-Van Trinh
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
FIXTURE,FLARING,MIDFRAME
FIXTURE, FLARING, MIDFRAME
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
GENERAL ELECTRIC COMPANY 99207 P/N 21C7771G01
RHINESTAHL CORPORATION 5QE71 P/N 21C7771G01
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A5-26-T-312J
SECTION B
PR: 7017527929 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017527929 0001 EA 1.000
NSN/MATERIAL:4920012379607
DELIVERY (IN DAYS):0347
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:07/19/2027 Original Required Delivery Date:10/14/2026
SPE4A5-26-T-312J NSN/Part Number: 4920-01-237-9607 Quantity: 1 EA Purchase Request: 7017527929QTY: 1 Delivery: 347 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332710
New
Federal
F-16 Wing Skin Milling BPAThe contract is for a five-year Basic Ordering Agreement to procure F-16 Wing Skin Milling Services in support of the 309th Engineering and Maintenance Group, with the solicitation number FA822826R0006 and a posted date of July 29, 2026. The opportunity is a Small Business Set Aside, meaning only small businesses are eligible to respond, and the NAICS code 332710 identifies it as a precision machining and metal fabrication service. Responses are due by August 28, 2026, at 5:30 a.m. MST, and the work will be performed at Hill Air Force Base in Utah. The contract is issued by the Department of Defense under the Air Force Sustainment Center, with the office located at Hill AFB, UT 84056-5805. Primary point of contact is Michael Checketts, reachable at 801-586-6638 or michael.checketts@us.af.mil, with Merrick Flygare as the secondary contact at 801-775-2223 or merrick.flygare@us.af.mil. The full solicitation can be accessed via the SAM.gov workspace link provided, and the procurement is classified as a combined solicitation under federal acquisition regulations. All potential offerors must meet small business size standards and have the technical capability to perform high-precision milling on F-16 wing skin components to fulfill the government’s maintenance and modernization needs over the contract term.
FA8228 Afsc Ol H Pzim

POSTED

about 3 hours ago

DEADLINE

in 30 days
View Details
NAICS: 332710
New
Federal
SEAL,FWD & AFTThis contract pertains to the procurement of the SEAL, FWD & AFT, a critical safety item designed exclusively for use in a Seal Delivery Vehicle (SDV) and integral to a vital shipboard system. The material must be manufactured strictly in accordance with NAVSEA drawing 8598523-03, P/N 8598523-03-001, with approved source limited to Parker Hannifin Cage 83259. Strict compliance with MIL-STD-130 marking requirements is mandated, and the non-metallic components must meet toxicity and flammability standards outlined in NAVSEA S9086-AD-SOC-030. Any deviation or waiver must be formally requested, classified as Critical, Major, or Minor, and approved by the Contracting Officer via the ECDS system. The item is designated as SPECIAL EMPHASIS Level I, requiring rigorous quality controls, traceability to the original heat lot, and submission of Objective Quality Evidence (OQE) for all deliveries. The contract prohibits mercury contamination and mandates configuration control, including submission of Engineering Change Proposals for any Class I or II changes impacting form, fit, function, or interface parameters. The contractor must maintain complete records of all departures from internal requirements and provide them to the Contracting Officer upon request. The contract enforces compliance with the Buy American Act, the Mandatory Use of Workflow Pro (WFP) Mod Assist Module for invoicing and receiving, and the Navy’s use of AbilityOne support contractors. It includes a one-year warranty effective from the last delivery, a firm fixed-price structure, and FOB destination terms. Payment terms are extended from the standard 7 days to 45 days post-delivery under the Prompt Payment clause modification. Delivery must be completed within 210 days, and no Government Source Inspection is authorized, making contractor quality systems and documentation the primary assurance of compliance. The solicitation is a total small business set-aside under NAICS code 332710, with all submissions required through SAM.gov and the ECDS portal at https://register.nslc.navy.mil/, which demands PKI CAC authentication. The contractor must also adhere to strict document handling protocols under OPNAVINST 5510.1, with distribution restrictions applicable to all provided technical data, and must respond by the deadline of August 24, 2026.
Navsup Weapon Systems Support Mech

POSTED

about 3 hours ago

DEADLINE

in 26 days
View Details
NAICS: 332710
New
DIBBS
Precision Machining of Pistol SlidesThe contract calls for the precision manufacture of pistol slides in full compliance with military specifications, encompassing advanced CNC machining, heat treatment, and surface finishing processes, all subject to rigorous quality inspection protocols to ensure dimensional accuracy, material integrity, and operational reliability. The work must meet exacting defense standards, with every phase of production tightly controlled to guarantee consistency and performance under demanding field conditions. The solicitation, issued under NAICS code 332710 for Machine Shops, is structured as a subcontract opportunity posted by the Department of Defense through LAND SUPPLIER OPNS VEHICLE SPT, with responses due by August 7, 2026. While no specific location for performance or point of contact is provided, the work is expected to be executed by qualified subcontractors with proven experience in defense-grade firearm component fabrication. All submissions must demonstrate technical capability, compliance with military requirements, and the capacity to deliver high-precision parts on schedule.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 22 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332710
New
DIBBS
Precision Machining of Breech Ring BandThe contract involves the precision machining, heat treatment, inspection, and finishing of breech ring bands in accordance with military specifications and a defined technical data package. Work must be performed to exacting standards ensuring functionality, durability, and compliance with defense industry requirements. The scope encompasses all manufacturing steps from initial CNC turning through final inspection and surface finishing, with strict adherence to quality control protocols expected throughout production. This is a total small business set-aside under the SBA program, reserved exclusively for small businesses classified under NAICS code 332710, which covers metal forge and stamping operations. The solicitation was posted on July 28, 2026, with a response deadline of August 27, 2026. The contracting activity is under the Department of Defense through the Land Supply Chain, with performance required at an unspecified location. Contractors must be capable of fulfilling all technical, regulatory, and delivery obligations tied to this critical military component.
LAND SUPPLY CHAIN

POSTED

about 22 hours ago

DEADLINE

in 29 days
View Details
NAICS: 332710
New
DIBBS
Precision Machined Component ManufacturingThe contract pertains to the manufacture of a precision metal component identified by part number 627828-20, requiring strict adherence to military technical drawings and material specifications. The work must be performed in compliance with industry and defense standards to ensure functionality and reliability in critical applications under the Nuclear Reactor Program, a division of the Department of Defense. The solicitation is structured as a subcontract opportunity with a NAICS code of 332710, indicating the scope involves metal forging, stamping, and related precision machining operations. All bids must be submitted by the response deadline of August 11, 2026, and the posting date of July 28, 2026, establishes the timeline for potential vendors to prepare and submit proposals. There is no specific set-aside designation, meaning the opportunity is open to all qualified contractors without preference based on business size or demographic criteria. The place of performance and agency office details are unspecified, but compliance with the technical requirements and delivery expectations linked to the Nuclear Reactor Program is mandatory. The official solicitation can be accessed via the provided DIBBS link for full submission guidelines and additional procurement details.
NUCLEAR REACTOR PROGRAM

POSTED

about 22 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332710
New
DIBBS
Precision Manufacturing of Insert Tool, Recepta AssemblyThe contract requires the manufacture of four units of the Insert Tool, Recepta, identified by NSN 4921-01-382-9778 and part number BA38897-01, to precise technical specifications in full compliance with Department of Defense quality standards and approved drawings. All work must be performed to meet stringent reliability and performance benchmarks established by the DLA, ensuring compatibility and functionality within existing military systems. The product is classified under NAICS code 332710, indicating it falls within the precision machining and tooling manufacturing sector, and is being procured as a subcontract under the Fluid Handling Division of the Department of Defense. Performance of the contract is designated to take place in Yorktown, Virginia, with a zip code of 23691, and all deliverables must be completed prior to the response deadline of August 10, 2026. The solicitation was posted on July 28, 2026, providing potential vendors approximately two weeks to prepare and submit proposals. While no specific set-aside designation is noted, the contract is structured as a subcontract and linked directly to the DIBBS platform, indicating formal alignment with defense procurement processes and expectations for supplier accountability, documentation, and delivery timelines.
FLUID HANDLING DIVISION

POSTED

about 22 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332710
New
DIBBS
BRACKET, FEED TUBEThe item is a BRACKET, FEED TUBE with NSN 5342-01-128-1745, quantity of 32 units, under purchase request 7015852934, with a delivery requirement of 140 days after date of award. The solicitation number is SPE4A7-26-Q-0900, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 5, 2026, and a posting date of July 28, 2026. Technical data associated with this item is subject to U.S. export control regulations under either ITAR or EAR, restricting its disclosure to foreign persons regardless of location and applying equally to foreign national employees and subsidiaries of U.S. companies. DFARS 252.225-7048 governs the handling of this controlled data. Contractors must hold an approved U.S./Canada Joint Certification Program certification, complete mandatory DLA training on handling export-controlled technical data, and submit the DLA Export-Controlled Technical Data Questionnaire to gain authorized access. Distribution is limited exclusively to DLA contractors who have received formal approval from the DLA controlling authority.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332710
New
DIBBS
TUBE ASSYThis contract pertains to the procurement of two units of a tube assemblyidentified by part number 14-64216-36 and NSN 4710-LN-003-1976 under solicitation SPEFA3-26-Q-0052, issued by the Defense Logistics Agency Fleet Readiness Center Southeast. The item is classified as a critical application item with no shelf life requirement, and unit identification is not mandated per the service customer’s request. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with applicable revisions determined by the acquisition type and timing of solicitation amendments. Packaging and marking must strictly comply with MIL-STD-129 and ASTM D3951, with palletization aligned to DLA Packaging Requirements RP001, and all DLA standards supersede ASTM where conflicts exist. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified; attributes are assigned verification levels or AQLs based on criticality, with unspecified attributes treated as major. The contract enforces a firm fixed price with zero variance in quantity, and delivery is required within 30 days after award date, with both inspection and acceptance occurring at the destination. The item must be delivered to the specified freight and parcel post addresses in Jacksonville, Florida, with the government’s material need date set for July 20, 2026. Pricing and unit details are structured per the DLA authorized unit of issue, and all compliance with DoD procurement directives is mandatory.
DLA FLEET READINESS CENTER SOUTHEAST

POSTED

about 22 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332710
New
Federal
CHASSIS,AIRCRAFTThe contract solicits the repair of a single aircraft chassis, identified by part number 407374-01112 and NSN 015338597, under a firm fixed price arrangement with strict compliance requirements. The contractor must perform all repairs, testing, and inspections to return the item to a Ready for Issue (RFI) condition in accordance with the latest approved technical publications and established procedures, with no deviations allowed without formal government approval via Form 1694 and endorsement by the Basic Design Engineer and DCMA. The contractual delivery requirement, known as Repair Turnaround Time (RTAT), is set at 56 days from the date the asset is physically received at the contractor’s facility, as recorded in the Commercial Asset Visibility (CAV) system. The contractor must also meet a specified monthly throughput capacity, and any asset received after the 365-day induction expiration window requires bilateral agreement for repair authorization. Price adjustments are contingent upon meeting RTAT, and repairs deemed Beyond Economical Repair, Missing on Induction, or Over and Above Repair require prior written concurrence from DCMA and formal direction from the Procuring Contracting Officer before proceeding. All repairs must be conducted at the designated facility owned by ATEC INC in Stafford, Texas, with no unauthorized changes permitted to the repair source, facility, drawings, specifications, or manufacturing processes. The contractor is responsible for sourcing all materials and parts as new unless otherwise approved in writing, and cannibalization of components is strictly prohibited without specific authorization from NAVSUP WSS and the Basic Design Engineer. A certified quality management system conforming to ISO 9001 and SAE AS9100 is required, along with an ANSI/NCSL Z540.3-compliant calibration program. The contractor must maintain detailed process control documentation, perform receiving inspections of all purchased materials with complete dimensional and certification records, and ensure proper storage conditions for both incoming and repaired assets. Government source approval is mandatory for award, and proposals must include all documentation outlined in the NAVSUP WSS Source Approval Brochure; incomplete submissions will be rejected. Quotes must be submitted via email to dana.n.knittel.civ@us.navy.mil by the August 27, 2026 deadline, and early or incremental deliveries are preferred.
Navsup Weapon Systems Support

POSTED

1 day ago

DEADLINE

in 29 days
View Details
NAICS: 332710
New
Federal
13--CYLINDER BARREL ANDThe contract involves the procurement of 194 units of a 13-CYLINDER BARREL AND component under NSN 3H-1355-015073138, with delivery terms FOB Origin and technical data package status indicating full Government rights with no restrictions on technical data, engineering, tooling, or manufacturing. This qualifies the item for full and open competition under AMSC 1, making it eligible for unrestricted bidding without limitations typically imposed by other AMSC codes. The acquisition is entirely set aside for small business concerns, in accordance with FAR clause 52.219-6, and the specific subset within the small business category—such as HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, women-owned, or historically black college and minority institution concerns—will be detailed in the solicitation through the inclusion of the appropriate FAR or DFARS clause. The NAICS code 332710 applies, and award is contingent upon the offeror, product, or manufacturer meeting all qualification requirements at the time of contract award per FAR 52.209-1. The solicitation number is N0010425RNE11, with a response deadline of August 10, 2026, and it was posted on July 28, 2026, as a presolicitation. The contracting office is the Navsup Weapon Systems Support Mech located in Mechanicsburg, Pennsylvania, with Jordan D. Neely listed as the primary point of contact. The procurement may be subject to Free Trade Agreements or the World Trade Organization Government Procurement Agreement, depending on whether the referenced DFARS clauses 252.225-7036 or 252.225-7021 are included in the final solicitation. Technical specifications, standards, and related documents can be accessed via the ASSIST-Online portal or through DODSSP, with internet access required for downloads; those without internet access may request documents via phone or mail. No patterns, drawings, or deviation lists are available through DODSSP. The place of performance is not specified, and award will be made based on compliance with all qualification and set-aside criteria as outlined in the solicitation.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 332710
New
DIBBS
Precision Machining of Orifice Components (NSN 5305-LN-003-4869)The contract requires the manufacture and delivery of 24 precision orifice components adhering to strict military specifications, with full material traceability and compliance with DLA rebuild standards. Each component must be produced to the exacting requirements of NSN 5305-LN-003-4869, and all revisions to design or process must be thoroughly documented to ensure consistency and quality control throughout production. The work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses qualify to bid, and the North American Industry Classification System code 332710 confirms the focus on forging and stamping, indicating the nature of the precision machining involved. The solicitation is issued by the Department of Defense through the DLA Fleet Readiness Center Southeast, and responses must be submitted by August 9, 2026, with the posting date indicating the opportunity was released on July 27, 2026. The place of performance and point of contact details are not specified, but compliance with DLA standards and full documentation of all revisions are mandatory. This contract emphasizes rigorous quality assurance, supply chain transparency, and adherence to defense procurement protocols, ensuring the final components meet the operational demands of military systems.
DLA FLEET READINESS CENTER SOUTHEAST

POSTED

2 days ago

DEADLINE

in 11 days
View Details
NAICS: 332710
New
DIBBS
Precision Machining of Component PartsThe contract calls for the precision machining of metal subcomponents including brackets, pins, and housings to be integrated into the Yoke Assembly, with all work required to meet stringent military specifications and inspection standards. The subcomponents must be manufactured to exacting tolerances to ensure compatibility, durability, and performance under operational conditions, with quality control protocols aligned to defense sector requirements. The work is classified as a subcontract under NAICS code 332710, indicating specialized metal finishing and machining services for defense applications. The opportunity was posted on July 27, 2026, with a response deadline of August 6, 2026, and is managed by the Department of Defense under the organization name Construction & Equipment Manu & Con. The place of performance and point of contact details are not specified, but the solicitation is issued through the DIBBS platform under solicitation number SPE8EF26Q0150. No set-aside provisions are indicated, meaning the contract is open to all eligible contractors without preference for small businesses or other designated categories. All qualified vendors must ensure full compliance with military inspection and documentation protocols prior to submission.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

2 days ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 332721
New
DIBBS
FUEL TANK VENTILATIThe contract is for the procurement of seven fuel tank ventilation kits identified by the NSN 4920-01-583-5563, categorized as a commercial off the shelf item with no shelf life requirement and determined not hazardous under the HMIC code review, eliminating the need for a Safety Data Sheet package. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless amended. Packaging must adhere to DLA standards, and government identification must be removed from non-accepted supplies as per specified protocols. The item is covered under defense information security protocols, and the procurement is managed under a Total Small Business Set-Aside, with NAICS code 332721 assigned to the contract. The solicitation, issued by the Department of Defense’s ASC Supplier Oper OEM Division, was posted on July 28, 2026, with responses due by August 5, 2026, and delivery is required within 342 days after order. The point of contact for inquiries is Hien-Van Trinh, reachable via email and phone. The place of performance is listed as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002.
Precision Turned Product Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
PANEL, STRUCTURAL, AIThe contract pertains to the procurement of a structural panel designated as PANEL, STRUCTURAL, AI, with NSN 1560-01-026-3876 and part number 50-7990-29S, under solicitation SPE4A5-26-T-312C. Three units are required to be delivered within five days of order placement, FOB origin, with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and all items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. The product is classified as a critical application item and must adhere to stringent quality provisions including ISO 9001:2015, CMMC Level 2 self-assessment, and MIL-STD-1916 sampling methodology with zero non-conformances unless otherwise specified. Packaging must follow MIL-STD-129 and RP001 DLA packaging guidelines, with non-hazardous items conforming to commercial packaging standards unless overridden by higher-priority DLA requirements. Item Unique Identification is not required per customer request. Shipping must be conducted via traceable freight methods, not parcel post, to the designated delivery address at Tinker AFB, Oklahoma. The contract mandates strict documentation for source approval, cybersecurity compliance, and material marking, including removal of government identifiers from non-accepted supplies. The unit of issue is each (EA), with a total price of $3.00 per unit. All technical and quality requirements referenced via R or I numbers are incorporated by full text from the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition scale. The delivery window is set for July 22, 2026, and the point of contact is Jackayla Pendergast at the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
THERMOSTAT, FLOW CONThis contract is for the procurement of a thermostat, flow control, part number 9844X110, manufactured by AMOT Controls Corp with CAGE code 94607, under the NSN 6685-01-288-9802. A total of four units are required at a unit price of $4.00, resulting in a total contract value of $16.00. The item is classified as a critical application item, and mercury or mercury-containing compounds are strictly prohibited from being intentionally added to or coming into direct contact with the hardware, except for specified functional uses such as batteries, fluorescent lights, sensors, or weapon systems as defined by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shock-proof and include a secondary containment boundary, per NAVSEA 5100-003D. Packaging and shipping must fully comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and all packaging must adhere to DLA’s proprietary packaging requirements. Hazardous materials packaging regulations prohibit mercury in preservation, packaging, packing, or marking. The delivery is FOB origin, with inspection and acceptance occurring at destination, and no quantity variance is permitted. The delivery timeline is 78 days from the contract award, with the original required delivery date set for July 28, 2026. The contract is a total small business set-aside under NAICS code 334519, administered by the Department of Defense, with deliveries directed to the DLA Distribution facility in New Cumberland, Pennsylvania. Technical and quality requirements referenced in the document are drawn from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size.
Other Measuring and Controlling Device Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
PLATE, STRUCTURAL, AIThe contract calls for the delivery of five structural plates designated as AI, identified by NSN 1560-01-716-9242, under solicitation SPE4A5-26-T-311K, with a required delivery date 197 days after award and a need ship date of May 12, 2026. The items must be supplied FOB origin with zero tolerance for quantity variance and are subject to inspection and acceptance at the destination. Packaging must comply with DLA’s specific procurement requirements, including MIL-STD-129 for marking and labeling, and ASTM D3951 for commercial packaging unless the material is classified as hazardous, in which case Fed-Std-313 and TQ requirement IP025 apply. All packaging and palletization must adhere to RP001, and the Unit of Issue is EA. Supplier compliance with technical and quality standards referenced in the DLA Master List is mandatory, including CMMC Level 2 self-assessment, ISO 9001:2015, and requirements related to measuring equipment and removal of government identification from non-accepted items. Item Unique Identification is not required per the service customer’s request. Sampling follows Sikorsky Corporation’s alternate plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916. Delivery is to DLA Distribution at the New Cumberland Facility in Pennsylvania, with transport instructions governed by DLAD procedural notes. The contract is under the NAICS code 336413, managed by the Department of Defense’s ASC Supplier Operations OEM Division, with Johquin Wiley as the primary point of contact.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
New
DIBBS
COVER, SHIPPING AND STOThe contract specifies the procurement of 139 units of a shipping and storage container with NSN 8140-01-593-3819 under solicitation SPE4A5-26-Q-0654, with a delivery requirement of 323 days after award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Documentation for source approval, packaging standards per DLA guidelines, export control compliance, and inspection procedures at origin are mandatory. Configuration changes require formal engineering change proposals for any deviation or waiver. The item is not subject to Item Unique Identification per service customer request, but all non-accepted supplies must have government identification removed. Technical data associated with this item is subject to ITAR or EAR export controls, restricting disclosure to foreign persons, including foreign nationals within the U.S., and requires prior authorization from the Department of State or Commerce. Access to this controlled data is limited to contractors with approved JCP certification, completed DOD export control training, and DLA authorization. The contract is managed by the Department of Defense’s ASC Supplier Operations OEM Division, with Donetta Nelson as the primary point of contact, and responses must be submitted by August 9, 2026.

POSTED

about 22 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334512
New
DIBBS
GAGE, PRESSURE, DIALThe contract is for a single pressure dial gage identified by NSN 6685-01-449-0699, with a delivery requirement of five days after order placement. The solicitation number is SPE4A5-26-T-312N, issued on July 28, 2026, with responses due by August 5, 2026. This item is subject to technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with applicable control identifiers RA001, RP001, RQ011, and RQ032. Technical data associated with the gage is controlled under ITAR or EAR regulations, prohibiting export or disclosure to foreign persons without prior authorization from the Department of State or Department of Commerce, including foreign nationals within the United States. Access to this export-controlled data is restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed required DOD training on handling controlled technical data, have filled out the DLA questionnaire, and have received explicit approval from the DLA controlling authority. The procurement falls under NAICS code 334512 and is managed by the Department of Defense through the ASC Supplier Operations OEM Division, with Cheryl Broadie designated as the point of contact for inquiries.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332216
New
DIBBS
INSERTER AND REMOVEThe contract specifies the supply of five units of an insert and remove item with NSN 5120-01-472-6224 and part number A10002-7, sourced from either The Boeing Company or Aeroforge Inc, under solicitation SPE4A5-26-T-311Y. Delivery is required FOB origin within 164 days of contract award, with strict zero variance in quantity and inspection and acceptance occurring at the destination facility in New Cumberland, Pennsylvania. All items must comply with DLA’s Master List of Technical and Quality Requirements, which take precedence over other standards such as ASTM D3951, and packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, including palletization and labeling. Unit of issue is each (EA), and the contract mandates adherence to MIL-STD-1916 or equivalent zero-based sampling plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Cybersecurity compliance requires CMMC Level 2 self-assessment, and government identification must be removed from non-accepted supplies per RQ011. Physical identification of bare items follows RQ017, and item unique identification is waived per DFARS 252.211-7003(c)(1)(i). Measuring and test equipment must meet RT001 standards, and all documentation for source approval submissions follows RC001. The delivery address, transportation protocols, and parcel post instructions are detailed, with a required ship date of January 17, 2027, and an original required delivery date of January 12, 2028.
Saw Blade and Handtool Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
WIRE ROPE ASSEMBLY,The contract specifies the procurement of a wire rope assembly with part number 582-7006 and NSN 4010-01-618-1374, for a quantity of eight units, under solicitation SPE4A5-26-T-311V. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with applicable revisions determined by the solicitation or award date depending on acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA packaging standards, with marking adhering to MIL-STD-129 and no special marking codes applied. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances required under sampling protocols aligned with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes are verified at levels VII, IV, and II respectively. Delivery is required within 20 days FOB origin, with no variance allowed in quantity, and shipment must be transported by the fastest traceable means, excluding parcel post, to the specified vessel shipment address at Port Hueneme, California. The item is designated for U.S. Marine Corps Underwater Construction Team 2, with a required delivery date of July 17, 2026, and the contract is governed by federal procurement rules under NAICS code 332618, issued by the Department of Defense’s ASC Supplier OEM Division.
Other Fabricated Wire Product Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332999
New
DIBBS
CLAMP, WIRE ROPE, BOLTEDOfferors must comply with strict requirements regarding telecommunications equipment, domestic sourcing, and additive manufacturing under this solicitation. The offeror certifies that it will not provide covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016, and must adhere to the Berry Amendment and Buy American Act restrictions, with the Berry Amendment threshold now set at $150,000. Any use of non-domestic materials requires full disclosure to the point of contact specified in the solicitation. Small business joint ventures must submit required representations for eligibility under designated small business categories. Fast Pay is not available for this procurement, and offerors are strongly encouraged to provide quantity ranges due to the fluctuating nature of purchase requests, enabling buyers to consolidate or adjust orders without resolicitation. Offers must be submitted through DIBBS, and those unable to submit by the closing date must file a “No Bid” with an anticipated quote date to avoid assumptions of non-responsiveness. Contractors must register via the new AMPS system within two months to gain access to the Vendor Shipment Module for shipping to DLA, and VSM WebServices users must update their internal schemas to maintain functionality. Offers containing items produced using additive manufacturing are ineligible for award unless prior approval is obtained from the contracting officer. The item under solicitation is a CLAMP, WIRE ROPE, BOLTED, NSN 4030-01-273-4636, with a single unit required and delivery expected 125 days after award, sourced from San Diego, California.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
DIBBS
SENSOR, AMBIENT TEMPThe contract specifies the procurement of one ambient temperature sensor with NSN 6685-01-700-3748 and part number DDE A0041534228 under solicitation SPE4A5-26-T-311Q, issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION. Delivery is required within 20 days to the Naval Expeditionary Logistics Support Group in Williamsburg, Virginia, with FOB origin terms and zero variance allowed in quantity. The item must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, with no special marking needed. Packaging must adhere to DLA packaging guidelines, and palletization is required. The sensor is to be shipped via the fastest traceable means, explicitly prohibiting parcel post, and must be delivered to the specified government address. Compliance with multiple technical and quality requirements is mandatory, including adherence to CMMC Level 2 Cybersecurity Self-Assessment, inspection and acceptance at origin, removal of government identification from non-accepted supplies, and use of calibrated measuring and test equipment. Sampling must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated, and attributes must be classified with specified verification levels or AQLs. The contract references the DLA Master List of Technical and Quality Requirements for all identified R and I numbers, and the item falls under NAICS code 334512. Delivery is due by July 22, 2026, and response to the solicitation was due by August 5, 2026. Government use details indicate internal tracking codes tied to the project and supplier information, with all documentation subject to DLA procedural notes and unit of issue guidance.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
DIBBS
GAGE, PRESSURE, DIAL INDThe contract specifies the procurement of a pressure dial indicating gage with NSN 6685-01-507-0600 and part number 1630001, under solicitation SPE4A5-26-T-311R, for a quantity of 27 units at a unit price of $27.00, totaling $729.00. Delivery is required within 55 days, FOB origin, with no variance allowed in quantity, and the item must be delivered to the designated receiving warehouse in Tracy, California. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling mandated to comply with MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise stated. Attributes are classified with verification levels or AQLs, and unspecified attributes are treated as major. Physical marking and packaging must adhere to MIL-STD-129 and ASTM D3951 for non-hazardous items, or FED-STD-313 with TQ requirement IP025 if hazardous, with all DLA requirements taking precedence over commercial standards. Packaging and palletization must follow RP001 DLA packaging requirements. Inspection and acceptance occur at the destination, and the unit of issue is each (EA). The supplier must comply with all labeling, marking, and transportation instructions per DLAD proc notes C19 and C20, with the original required delivery date set for July 28, 2026.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333515
New
DIBBS
GAGE, ABSOLUTE PRESSThe contract is for the procurement of two absolute pressure gauges with part number 15PSIXP2I-S2-F4 and NSN 6685017189694 under solicitation SPE4A5-26-T-310X, issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION. Delivery is required within five days of award, FOB origin, with no tolerance for quantity variance, and both inspection and acceptance occur at the origin. The items must be packaged in strict compliance with MIL-STD-2073-1E and marked per MIL-STD-129 with a special designation for delicate instruments. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must adhere to DLA Packaging Requirements for Procurement and palletization standards, with shipment directed to DZ IKMAL MERKEZI KOMUTANLIGI in Derince, Izmit, Turkey, identified by freight codes PTKB00 and PTKB5461146046. The original required delivery date is July 30, 2026, with the contract solicitation posted July 28, 2026, and responses due by August 5, 2026. Unit of issue is each, priced at $2.00 per unit for a total value of $4.00, and the item falls under NAICS code 333515. Government-specific identifiers and logistics data are included for internal tracking and distribution purposes.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details