Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

FIXTURE, LIGHTING

Active
SPE4A6-26-T-10PMFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicitation SPE4A6-26-T-10PM is for the procurement of one unit of a lighting fixture identified by NSN 6210-01-667-1558 and part number 14008C0140-1, with a unit price of $708.79 and a total contract value of $708.79. Delivery is required within 10 days of an as-directed order, with the original delivery due date set for July 22, 2026, and the shipment to be delivered FOB origin to Camp Kinser, Japan, where both inspection and acceptance occur. The item must comply with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required and packaging code Q indicating qualified packaging at level B. Preservation is dry/clean, with no wrapping, cushioning, or preservation materials needed. Sampling for quality control follows MIL-STD-1916 or ASQ H1331, Table 1, with acceptance criteria requiring zero non-conformances; critical, major, and minor attributes are assigned verification levels VII, IV, and II with AQLs of 0.1, 1.0, and 4.0 respectively. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific directives including removal of government identification from non-accepted supplies and bare item marking. The procurement is subject to stringent cybersecurity and defense information safeguarding requirements under DFARS 252.204-7012 and prohibitions against covered telecommunications equipment under DFARS 252.204-7018. Use of hexavalent chromium is prohibited, and all hazardous materials must be labeled per OSHA Hazard Communication Standard. The contract mandates electronic invoicing via WAWF and includes representations related to employment eligibility, combating trafficking, equal opportunity, and compliance with compensation rules for former DoD officials. Offerors must provide their UEI and CAGE code and declare size status and socioeconomic certifications, with any affirmative representation regarding covered defense telecommunications equipment triggering mandatory disclosure requirements. Proposals must be submitted electronically through the DLA Internet Bid Board System by August 7, 2026, and the award will be based on compliance with all technical, quality, and regulatory specifications, with no options or

General Info

One lighting fixture, part number 14008C0140-1, due July 22, 2026, FOB origin to Camp Kinser, Japan.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

335132 - Commercial, Industrial, and Institutional Electric Lighting Fixture ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-10PM DLA Aviation Jul 31 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
LAKISHA Atkinson
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
FIXTURE,LIGHTING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
FIXTURE,LIGHTING
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
CRITICAL APPLICATION ITEM
CAROLINA GROWLER INC 550C1 P/N 14008C0140-1
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A6-26-T-10PM
SECTION B
PR: 7017607339 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017607339 0001 EA 1.000
NSN/MATERIAL:6210016671558
DELIVERY (IN DAYS):0010
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
M20220
DISTRIBUTION MANAGEMENT OFFICE
BLDG 401 CAMP KINSER
MF M20220 ATTN: DIST MGMT OFFICER
CAMP KINSER 901-2100
JP
RDD(3-POS RDD)/NMCS SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DEST TRANS SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
M29100
DISTRIBUTION MANAGEMENT OFFICE
BLDG 401 CAMP KINSER
MF M29100 9TH ENG SUPT BN
CAMP KINSER 901 2100
JP
MARKFOR
M29100
DISTRIBUTION MANAGEMENT OFFICE
BLDG 401 CAMP KINSER
MF M29100 9TH ENG SUPT BN
CAMP KINSER 901 2100
JP
M/F: (TCN) M2910061980015
RDD: N
SPE4A6-26-T-10PM
SECTION B
PR: 7017607339 PRLI: 0001 CONT’D
PROJ: TP 2
SUPP ADD: YHMAIN SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A31 DIST: ADV: 2A FC: CS
Need Ship Date:00/00/0000 Original Required Delivery Date:07/22/2026
SPE4A6-26-T-10PM NSN/Part Number: 6210-01-667-1558 Quantity: 1 EA Purchase Request: 7017607339QTY: 1 Delivery: 10 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335132
New
SLED
Purchase of Lighting Heads and Poles for Canal Street and Riverwalk
Solicitation # 2027-00
The City of Shelton is soliciting competitive bids for the purchase of lighting heads and poles to be installed along Canal Street and the Riverwalk under solicitation number 2027-00. The request is open to qualified vendors, with bids due by August 14, 2026, at 3:00 PM Eastern Time. The project falls under the jurisdiction of the Building Maintenance department within the state of Connecticut, and the place of performance is localized to Shelton, CT. The solicitation is issued by a state, local, or educational government entity and does not specify a set-aside or NAICS code. All proposals must be submitted in response to the public procurement process managed through the City’s official procurement portal. Primary contact for inquiries is Chris Potucek, Supervisor at Building Maintenance, reachable via phone at 203-925-8576 or email at c.potucek@cityofshelton.org. Elizabeth Saint John, Administrative Assistant in Purchasing, serves as the secondary contact and can be reached at 203-924-1555 or e.saintjohn@cityofshelton.org. The project location is within Shelton, and all equipment must comply with the City’s technical and installation requirements. Bidders are encouraged to review the full solicitation on the official procurement portal at the provided UI link for detailed specifications, submission guidelines, and evaluation criteria.
Building Maintenance

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335132
New
Federal
Containerized Kitchen Light kits
Solicitation # W911N226QA065
This procurement is a combined synopsis and solicitation under FAR Part 12 for 39 units of Weatherhaven part number 147820, Containerized Kitchen Light Kits, issued as Request for Quotation W911N2-26-Q-A065. The acquisition is fully set aside for small business concerns with no portion reserved for large businesses, and it falls under the Product Service Code 6210 for indoor and outdoor electric lighting fixtures, with a NAICS code of 335132 for commercial, industrial, and institutional electric lighting fixture manufacturing. The solicitation does not require a separate written document, as it serves as the complete and sole source of requirements, incorporating all applicable provisions and clauses by reference, accessible electronically via acquisition.gov. Offers must be submitted by August 14, 2026, at 4:00 PM, with anticipated award scheduled for September 1, 2026. The requirement is managed by the Department of Defense through the W6QK Lad Contr Office located in Chambersburg, Pennsylvania, with performance anticipated at the same location. Primary point of contact is Thomas C. Hall, reachable at 717-267-5583 or thomas.c.hall111.civ@army.mil, with Danielle Rhone as the secondary contact at 717-267-8480 or danielle.r.rhone.civ@army.mil. All proposals must comply with the solicitation procedures outlined at FAR 12.201-1(c)(1), and the full details of the requirement, submission guidelines, and evaluation criteria are available through the provided SAM.gov link. The process is streamlined under the commercial acquisition streamlined procedures, with no pre-solicitation conference required and all information contained within this single document.
W6QK Lad Contr Office

POSTED

about 20 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335132
New
DIBBS
Military-Grade Lighting Fixture ManufacturerManufacture and deliver one military-grade lighting fixture conforming to NSN 6210-01-667-1558 and part number 14008C0140-1, ensuring full compliance with all applicable Department of Defense technical specifications and quality assurance standards. The contract is structured as a subcontract under NAICS code 335132, managed by the ASC Commodities Division within the Department of Defense, and requires fulfillment to exacting military performance criteria. The solicitation was posted on July 30, 2026, with responses due by August 7, 2026, and the deliverable must be produced and submitted in accordance with federal procurement protocols governing defense procurement. The place of performance and point of contact details are not specified, but the work must be executed to meet stringent military requirements for durability, reliability, and safety under operational conditions.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 335132
New
DIBBS
LIGHT, WARNING
Solicitation # SPE4A6-26-T-10MP
This contract mandates the procurement of one unit of a warning light with NSN 6210016334320 under solicitation SPE4A6-26-T-10MP, requiring delivery within 20 days to FPO AP 96694 aboard the USS JOHN P MURTHA LPD 26. The item must be packaged in strict compliance with ASTM D3951, but only to the extent that it does not conflict with the superior requirements listed in the DLA Master List of Technical and Quality Requirements, which govern all technical and quality specifications. Packaging and labeling must adhere to MIL-STD-129, with palletization following DLA’s RP001 guidelines, and no parcel post is permitted—shipment must occur via the fastest traceable means as specified under DLAD PROC NOTE C19 and C20. The delivery is FOB destination, with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. The supplier must ensure all government identification is removed from non-accepted supplies, and any covered defense information must be handled per RD003. The original required delivery date is July 23, 2026, with a specified need date left blank, and the contract includes specific project, shipment, and supplier codes for tracking and compliance. The point of contact for inquiries is Gloria Frimpong of the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335132
New
DIBBS
LAMP, FLUORESCENT
Solicitation # SPE4A7-26-T-053J
The contract pertains to the procurement of 50 fluorescent lamps identified by NSN 6240017191648 and part number F50BX/SPX30/RS from General Electric Company DBA GE, with a required delivery within 20 days of contract award, delivered FOB destination. The item is classified as a critical application item with no shelf life requirement, and must conform to stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, including the special fragile marking code 01, with palletization following DLA packaging guidelines. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise specified, and verification levels or AQLs are assigned according to attribute criticality. Delivery is directed to the USNS WALLY SCHIRRA T-AKE 8 at FPO AP 96678, with transportation and freight handled per DLA procedural notes C19 and C20. The contract enforces strict compliance with documentation requirements for source approval, removal of government identification from non-accepted supplies, and handling of covered defense information. The unit of issue is each (EA), with no quantity variance permitted, and inspection and acceptance occur at the destination. The solicitation, issued under SPE4A7-26-T-053J, has a response deadline of August 3, 2026, and is managed by the Department of Defense's ASC Supplier Operations AE and AF Division, with Denise Prince listed as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 335132
New
DIBBS
LENS ASSEMBLY, HIGH
Solicitation # SPE4A6-26-T-10KA
The contract governs the procurement of ten LENS ASSEMBLY, HIGH units under solicitation SPE4A6-26-T-10KA, with delivery required within 117 days of award. Technical and quality requirements are dictated by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with compliance tied to the revision effective on the solicitation issue date or award date depending on acquisition size. The item is subject to stringent quality controls including sampling per MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes mandated to verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required for acceptance unless otherwise stated. Physical identification of bare items must comply with RQ017, and source approval documentation must meet RC001 standards. The contract prohibits intentional introduction of mercury or mercury compounds into the supplied hardware, except for functional uses in specified components like batteries, fluorescent lamps, and controlled instruments, which must include a secondary containment and meet NAVSEA 5100-003D shockproofing requirements. The technical data associated with this item is subject to export control under ITAR or EAR, and access is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and been approved by DLA. Cybersecurity compliance requires CMMC Level 2 certification by a C3PAO, and all supplies must be free of government identification if not accepted. The point of contact for inquiries is Duane Watkins, and delivery is to Tracy, CA 95304-5000.
ASC COMMODITIES DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 335132
New
DIBBS
LIGHT, INDICATOR
Solicitation # SPE4A6-26-T-10JH
This contract pertains to the procurement of light indicators under solicitation SPE4A6-26-T-10JH, with a total quantity of 32 units delivered FOB origin, subject to zero variance in quantity. The item is identified by NSN 6210-14-573-3908 and is classified as a critical application item, with specific approved part numbers from manufacturers including Schneider Electric, Thales SA, Soprano Industry, and W.W. Grainger. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referencing R and I numbers, while packaging must comply with MIL-STD-2073-1E and DLA-specific packaging standards. Sampling for inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. All items must be marked per MIL-STD-129 with special fragile labeling and palletized per RP001. Delivery is required within 163 days to the destination warehouse in Tracy, California, with inspection and acceptance occurring at the delivery point. The contract includes requirements for source approval documentation, removal of government identification from rejected items, physical identification of bare parts, and tailored higher-level quality provisions applicable to both manufacturers and non-manufacturers. The need ship date is January 17, 2027, with the original required delivery date set for March 3, 2027, and all transportation logistics follow DLA procedural notes C19 and C20.
ASC COMMODITIES DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 335132
New
DIBBS
Manufacture of Perimeter Light AssembliesThe contract requires the full manufacturing of 18 Perimeter Light Assemblies to meet military specifications, encompassing all aspects of production from component sourcing and assembly to rigorous testing and quality assurance. Production must adhere to either AS9003 or ISO 9001 quality standards, ensuring consistent performance and reliability under demanding operational conditions. The work is to be performed at a designated location in New Cumberland with a ZIP code of 17070-5002, and the manufacturing effort falls under NAICS code 335132, which corresponds to the manufacturing of electrical lighting equipment. The solicitation, issued as a subcontract by the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV, sets a response deadline of August 5, 2026, with the opportunity posted on July 28, 2026. All deliverables must satisfy military requirements without any set-aside provisions specified.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 335132
New
DIBBS
Manufacture of LED Lamps (Light Emitting Lens Type)The contract calls for the manufacture of 20 units of a commercial off-the-shelf LED lamp identified by part number LSTD-H2S and National Stock Number 6210-01-658-3855, adhering strictly to Defense Logistics Agency technical and quality standards. The item is classified under NAICS code 335132, indicating manufacturing in the lighting equipment sector, and is being procured as a subcontract under the Department of Defense. The production must meet all applicable specifications for performance, durability, and compliance required for military use, with the final product delivered to the designated place of performance at FPO, zip code 09591-2500. The solicitation was posted on July 28, 2026, with a response deadline of August 10, 2026, providing potential vendors a 13-day window to submit proposals. Although no specific point of contact or set-aside details are provided, the contract is formally issued through the Defense Logistics Agency via the DIBBS platform, and interested parties must follow the submission process outlined in the solicitation linked through the official DIBBS portal. Compliance with federal acquisition regulations and delivery timelines will be critical for selection and award.
Defense Logistics Agency

POSTED

4 days ago

DEADLINE

in 9 days
View Details
NAICS: 335132
New
DIBBS
Light Filter Manufacturing and SupplyThe contract requires the manufacture and supply of a single unit of a light filter identified by Part Number 112-7242-11 and National Stock Number 6210-01-455-5168, with strict adherence to military-specific packaging, labeling, and delivery protocols. This is a subcontract under the Defense Logistics Agency, a component of the Department of Defense, and the work must be performed at a designated location in Smyrna with the zip code 37167-2025. The solicitation is classified under NAICS code 335132, which corresponds to the manufacturing of electrical lighting equipment, indicating the technical nature of the component to be produced. The opportunity was posted on July 28, 2026, and the deadline for responses is August 10, 2026, with no set-aside provisions specified, meaning it is open to all eligible contractors regardless of business size or classification. All deliverables must fully meet U.S. military standards to ensure compatibility and functionality within defense systems.
Defense Logistics Agency

POSTED

4 days ago

DEADLINE

in 9 days
View Details
NAICS: 335132
New
DIBBS
LAMP, LIGHT EMITTING
Solicitation # SPE8E7-26-T-3431
The contract entails the procurement of 20 units of a commercial off-the-shelf lamp, light emitting, identified by NSN 6210-01-658-3855 and part number LSTD-H2S from IDEC Systems and Controls Corp DBA 60886. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 labeling and DLA-specific packaging directives under RP001, with units packed according to the specified Unit of Issue and Quantity per Unit Pack. Each unit is to be delivered FOB origin within 20 days of the contract award, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and the items must be shipped via the fastest traceable means, excluding parcel post. The delivery address is the USNS Robert E. Simanek (T-ESB-7), FPO AE 09591-2500, with a required delivery date of January 15, 2026. The contract is issued under solicitation SPE8E7-26-T-3431, utilizing the DLA-authorized unit of issue, and is subject to all applicable DLA procurement regulations, including the removal of government identification from non-accepted supplies. The primary point of contact for the contract is Kelly Mitchell at the Defense Logistics Agency.
Defense Logistics Agency

POSTED

4 days ago

DEADLINE

in 10 days
View Details
NAICS: 335132
New
DIBBS
FILTER, LIGHT, UTILIT
Solicitation # SPE8E7-26-T-3413
The contract pertains to the procurement of one unit of a light filter with part number 112-7242-11 and NSN 6210-01-455-5168, furnished by Dyncorp International LLC under solicitation SPE8E7-26-T-3413. Delivery is required within five days of award, FOB origin, with no quantity tolerance allowed, and inspection and acceptance occur at the destination. The item must be packaged in compliance with ASTM D3951 but subject to the higher precedence of DLA’s Master List of Technical and Quality Requirements, including markings and labeling per MIL-STD-129. Palletization must adhere to DLA’s RP001 packaging standards, and the unit of issue is EA with a quantity per unit pack of 001. Shipment must be sent via traceable means, excluding parcel post, to the designated military distribution point in Smyrna, Tennessee, with the RDD code and project identifier specified for tracking. The required delivery date is January 13, 2026, and the contract includes specific government-only codes and identifiers for logistics and administrative use. All technical and quality specifications referenced are governed by the DLA Master List, with revision control tied to the solicitation issue date for simplified acquisitions.
Defense Logistics Agency

POSTED

4 days ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541380
New
DIBBS
Product Verification Testing CoordinationThe contract requires the preparation, marking, and shipment of Product Verification Test (PVT) samples in full compliance with Department of Defense standards, including proper segregation of materials and complete documentation to ensure traceability and regulatory adherence. All activities must be conducted under strict guidelines to meet the DoD’s quality and procedural requirements for verification testing. The effort is classified as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the Small Business Administration, and falls under the NAICS code 541380 for other scientific and technical consulting services. The solicitation was posted on July 31, 2026, with a response deadline of August 20, 2026, and is managed by the ASC Commodities Division within the Department of Defense. Performance will occur at an unspecified location, and the award is expected to follow competitive procedures under the Federal Acquisition Regulation.
Testing Laboratories and Services

POSTED

about 15 hours ago

DEADLINE

in 19 days
View Details
NAICS: 488510
New
DIBBS
Supply Chain & Logistics Compliance ManagementThe contract requires management of specific DLA logistics modules—C03, C07, C16, and C20—with a focus on maintaining adequate material buffers to prevent stockouts and ensure operational readiness. It mandates rigorous part number tracking to guarantee accurate inventory visibility and accountability across the supply chain, while ensuring full compliance with First Destination Transportation regulations to meet military shipment standards. All activities must align with strict logistical protocols to support timely and accurate delivery of critical components. This is a small business set-aside subcontract under NAICS code 488510, issued by the ASC Commodities Division within the Department of Defense, with a submission deadline of August 20, 2026. The solicitation is posted on the DIBBS system and is open only to small business concerns, emphasizing support for small business participation in defense logistics. While the place of performance and detailed point of contact information are not specified, successful bidders must be prepared to execute responsibilities across the Department of Defense’s logistics network without geographic limitation, ensuring all compliance requirements are met consistently and in real time.
Freight Transportation Arrangement

POSTED

about 15 hours ago

DEADLINE

in 19 days
View Details
NAICS: 323111
New
DIBBS
Military-Compliant Labeling & BarcodingThe contract requires the application of permanent, MIL-STD-129-compliant labels and 2D barcodes to shipping containers used by the Department of Defense, ensuring full adherence to military standards for identification and tracking. Special markings must be included for test samples to distinguish them from standard shipments, with all labeling required to be durable and legible under operational conditions. This is a small business set-aside subcontract under NAICS code 323111, exclusively open to small businesses, and is managed by the ASC Commodities Division. The solicitation was posted on July 31, 2026, with a response deadline of August 20, 2026, and performance is expected to support DoD logistics operations without specified geographic limitations, though exact location details are not provided.
Commercial Printing (except Screen and Books)

POSTED

about 15 hours ago

DEADLINE

in 19 days
View Details
NAICS: 493190
New
DIBBS
Military Packaging & Preservation ServicesThe contract requires the provision of military-grade packaging and preservation services for adjustable clevises in full compliance with MIL-STD-2073-1E standards, ensuring that all items are properly cleaned, dried, and protected against corrosion and environmental damage during storage and transit. The packaging must include stretch wrap containerization as the specified method for securing and stabilizing the items within shipping containers, maintaining integrity and preventing movement during handling. All work must adhere to strict defense logistics protocols to guarantee readiness and operational reliability. This is a small business set-aside subcontract under the SBA Total Small Business Set-Aside category, designated under NAICS code 493190, and issued by the Department of Defense’s ASC Commodities Division. Interested parties must submit proposals by the deadline of August 20, 2026, with performance expected to meet exacting military specifications and timelines. The contract emphasizes quality control, regulatory compliance, and the use of approved preservation and packaging techniques to support the Department of Defense’s supply chain requirements.
Other Warehousing and Storage

POSTED

about 15 hours ago

DEADLINE

in 19 days
View Details
NAICS: 332710
New
DIBBS
Adjustable Clevis Manufacturing & SupplyThe contract calls for the manufacture and supply of adjustable clevises identified by NSN 5342-01-166-0578, to be produced in strict compliance with military specifications. This includes precision machining to exact dimensional and performance standards, along with proper packaging and marking requirements to ensure traceability and readiness for military use. The work must be performed by a small business as this is a Total Small Business Set-Aside under FAR 19.5, meaning only eligible small businesses may submit bids. The NAICS code 332710 applies, categorizing the work under Other Metal Forge and Stamp. The solicitation was posted on July 31, 2026, with a response deadline of August 20, 2026, giving interested parties approximately three weeks to prepare and submit proposals. The contracting activity is the ASC Commodities Division under the Department of Defense, and the place of performance and point of contact details are not specified in the provided data. Bidders must ensure complete adherence to military standards, packaging protocols, and marking regulations, and submissions must be made through the official DIBBS portal accessible via the provided link.
Machine Shops

POSTED

about 15 hours ago

DEADLINE

in 19 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, EXTENDED
Solicitation # SPE4A6-26-T-09HS
The contract solicitation SPE4A6-26-T-09HS issued by the Defense Logistics Agency’s ASC Commodity Division seeks the procurement of 50 hardcase units of the NUT, PLAIN, EXTENDED, identified by NSN 5310-01-392-9590, to be delivered FOB ORIGIN to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required delivery date of October 14, 2026, or 324 days after award. The item must comply with strict military and DLA specifications including packaging per MIL-STD-2073-1E, preservation method 10 with cleaning and drying, and marking consistent with MIL-STD-129, including 2D Data Matrix barcoding and no special marking code. Physical identification of bare items must adhere to RQ017, and palletization must follow DLA Packaging Requirements RP001. Quality control requires sampling per MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances acceptable unless otherwise stated; unspecified attributes are treated as major with an AQL of 1.0. Inspection and acceptance occur at the destination point by the government. All payment requests and receiving reports must be submitted electronically via WAWF, and contractors must comply with DFARS clauses regarding cybersecurity, hazardous materials, export controls, trafficking in persons, employment eligibility, sustainable products, and prohibition of hexavalent chromium. The contract includes clauses for safeguarding covered defense information per NIST SP 800-171, prohibition on acquiring items from Communist Chinese military companies, and restrictions on arbitration agreements. No pricing is provided in the solicitation, and the contract type, award basis, or evaluation factors are not specified, indicating this is a simplified acquisition likely under LPTA standards. Offerors must submit electronically via DIBBS by August 5, 2026, and are required to provide UEI and CAGE codes, represent size and socioeconomic status, and disclose if supplying covered telecommunications equipment. The contract enforces a zero variance in quantity and mandates compliance with the DLA Master List of Technical and Quality Requirements referenced by R001.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 213113
New
DIBBS
BEARING, SLEEVE
Solicitation # SPE4A6-26-T-08MV
The contract solicitation SPE4A6-26-T-08MV pertains to the procurement of a sleeve bearing with NSN 3120012860906, Quantity: 4 units, under a fixed-price delivery order. Delivery is required within 171 days after award, with FOB Origin terms, meaning title and risk transfer to the government upon delivery to the carrier at the contractor’s location. The sole approved sources are Kamatics Corporation and Roller Bearing Company of America, with specific part numbers mandated for compliance, and tooling or casting/forging may be required in manufacturing, for which contractors must seek assistance through DLA’s specialized forging and casting support channels if not already equipped. Packaging and preservation must fully comply with MIL-STD-2073-1E, using preservation method 33, clean and dry condition, preservation material 49, and wrapping material EA, with intermediate and unit containers coded E5 and packaging code U. Marking requirements adhere strictly to MIL-STD-129, with no special marking codes applied, and bare item identification must be present per RQ017. Inspection and acceptance occur at origin, governed by FAR 52.246-2, with sampling mandated to follow MIL-STD-1916 or ASQ H1331 Table 1, requiring zero non-conformances in the sample lot unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. Quality assurance systems must align with SAE AS9003 or ISO 9001 tailored to AS9003. The offeror must hold a valid UEI and CAGE code and represent its small business status if claiming socioeconomic status such as WOSB, EDWOSB, SDVOSB, or HUBZone, and must provide UEIs for all joint venture partners if applicable. Invoicing is exclusively required through WAWF, and electronic submission of proposals is mandatory via DIBBS by the deadline of August 5, 2026. Compliance with multiple DFARS clauses is enforced, including safeguarding covered defense information (252.204-7012), prohibition of hexavalent chromium (252.223-7008), export control (
Support Activities for Coal Mining

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE4A6-26-T-04MJ
The contract pertains to the procurement of 33 units of a hexagon head cap screw identified by the NSN 5305-01-241-6224 under purchase request 7017199954. The solicitation, issued by the Defense Logistics Agency under the Department of Defense, is designated by the solicitation number SPE4A6-26-T-04MJ and was posted on July 7, 2026, with a response deadline of July 15, 2026. This federal procurement is open for bids in accordance with standard government contracting procedures, and the place of performance and shipping details are not specified in the provided data. Interested parties must submit responses through the official DIBBS portal linked in the solicitation before the deadline to be considered.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-09HR
The contract solicitation SPE4A6-26-T-09HR calls for the procurement of 80 machine bolts, specifically self-locking bolts identified by NSN 5306-01-175-5359, under a simplified acquisition framework. Delivery is required FOB Origin within 155 days of award, with the final destination being the DDSP New Cumberland Facility in Pennsylvania, and all inspections and acceptances are to occur at the manufacturer’s or supplier’s location. The item is procured against a military or federal specification and is not subject to shelf life restrictions or Item Unique Identification requirements as per DFARS 252.211-7003(c)(1)(i). Packaging, marking, and preservation must strictly comply with DLA Master List requirements, particularly RP001 for palletization and packaging, MIL-STD-129 for shipping labels and barcoding, and MIL-STD-130N for bare item identification including manufacturer logo, lot number, and material identification. Hazardous materials labeling must adhere to 29 CFR 1910.1200, and safety data sheets must be submitted prior to award. The contract incorporates numerous Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses mandating compliance with cybersecurity standards including safeguarding covered defense information under 252.204-7012 and alignment with NIST SP 800-171 requirements through 252.240-7997, with deviations authorized under specific tracking numbers. Provisions prohibit the acquisition of covered telecommunications equipment from entities like Huawei or ZTE and require contractors to inform employees of whistleblower rights. Payment must be submitted electronically via Wide Area WorkFlow, and all subcontracting for commercial products follows specific clauses with deviations. The contracting officer is Debra Fowler of the Department of Defense’s ASC Commodities Division, and offerors must hold a Valid Unique Entity ID and CAGE code, with small business representation mandatory under FAR 52.219-1. All material must conform to ASME B18.2.1 standards and be produced under a quality management system compliant with SAE AS9003 or ISO 9001 as tailored. The solicitation does not include pricing details, contract value estimates, or evaluation factors, and submissions must be made exclusively through the DIBBS portal with no paper submissions permitted.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, SLOTTED, H
Solicitation # SPE4A6-26-T-08RR
The contract covers the procurement of 70 units of NUT, PLAIN, SLOTTED, H, identified by NSN 5310-01-559-2806, under solicitation SPE4A6-26-T-08RR, issued by the ASC Commodities Division of the Department of Defense. Delivery is required within 171 days after award, with FOB Origin terms, and acceptance occurs at the origin point. The items must conform to the technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which supersede all other references including ASTM D3951. The product specification aligns with DIN979 Revision dated 10/01/2010, and manufacturing must comply with tailored quality requirements per RQ001, including compliance with SAE AS9003 or ISO 9001 as implemented through an inspected quality system. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required in the sample lot unless otherwise directed, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Packaging and marking must adhere to MIL-STD-129 and RP001 for palletization, with bare item marking required per RQ017 and removal of government identification from non-accepted supplies mandated by RQ011. Hazardous materials must be labeled in accordance with OSHA’s Hazard Communication Standard and accompanied by approved safety data sheets prior to award. All packaging must also reflect the specified Unit of Issue and Quantity per Unit Pack as defined in the contract. The contract mandates use of the Wide Area WorkFlow (WAWF) system for invoicing and receiving reports, with payment routing determined by the award-specific DoDAAC. Cybersecurity requirements under NIST SP 800-171 and DFARS 252.204-7012 are enforced, requiring implementation of security controls and reporting of cyber incidents within 72 hours. The solicitation includes mandatory clauses on equal opportunity, combating trafficking in persons, employment eligibility verification, sustainable products, and unauthorized obligations, all subject to deviations. Offerors must hold a valid UEI and CAGE code and comply with socioeconomic representations for small business, HUBZone, or other designated categories. Pricing is provided as a total
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
PIN, STRAIGHT, THREAD
Solicitation # SPE4A6-26-T-02AQ
The contract is for the procurement of 30 straight threaded pins identified by the NSN 5315-01-424-1861 under solicitation number SPE4A6-26-T-02AQ, issued by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on June 30, 2026, with a response deadline of July 8, 2026, and is classified as a federal procurement under NAICS code 339993 which pertains to other miscellaneous fabricated metal product manufacturing. The place of performance and specific office address details are not provided, and no set-aside provisions are indicated, meaning the opportunity is open to all eligible contractors. The solicitation is accessible through the DIBBS system for potential vendors seeking to respond to the requirement.
Hardware Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-09KV
The contract solicits ten bushings, sleeves with NSN 3120010145565, sourced exclusively from the approved manufacturer Boeing under CAGE 81205 and part number 66-29042, designated as a critical application item requiring adherence to the Technical Data Package Revision A General 1 per reference QAP 13873 QAP-B02 Revision NR B dated 12/11/2013. Delivery is required within 20 days after award to Prince Sultan Air Base in Al Kharj, Saudi Arabia, under FOB Origin terms, with no variance permitted in quantity. All items must be packaged in accordance with MIL-STD-2073-1E, using QUP 001, preservation method 31, clean/dry condition 1, and no preservation material; packaging level is B with packaging code Q and unit container BL, intermediate container E5, and outer packaging indicator M. Marking must strictly conform to MIL-STD-129 with no special marking code applied, and palletization must meet DLA packaging requirements. Inspection and acceptance occur at origin, contingent upon compliance with FAR 52.246-2 and quality systems aligned with SAE AS9003 or ISO 9001 as tailored to AS9003. The contract incorporates numerous FAR and DFARS clauses governing cybersecurity, safety of covered defense information, trafficking in persons, employment eligibility, sustainable products, hazardous material handling, whistleblower rights, subcontracting, and safeguarding government information, including specific compliance with NIST SP 800-171 and DFARS 252.204-7012. Offerors must certify their entity status via Unique Entity ID and CAGE code per DFARS 252.204-7017, disclose any covered defense telecommunications equipment or services, and submit Safety Data Sheets and hazard warning labels for all applicable hazardous materials under 29 CFR 1910.1200 and Federal Standard No. 313, unless exempt under specified federal statutes. Proposals must be submitted electronically via DIBBS by the deadline of July 31, 2026, and all invoicing must follow the WAWF system. The contract does not specify unit prices, total value, or award methodology, and it includes no option quantities
Ball and Roller Bearing Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details