This Solicitation opportunity from Department Of Defense was posted on May 10, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
FLAG, ROTC, JUNIOR
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
This contract covers the procurement of a single ROTC Junior High School flag, measuring 3 feet by 4 feet, manufactured in accordance with specific military drawings and detailed specifications, including MIL-DTL-2692K and related standards. The item is to meet stringent quality and technical requirements established by the Defense Logistics Agency (DLA), incorporating multiple layered standards such as MIL-STD-129 for marking and packaging, as well as DLA’s packaging requirements. First Article Testing is mandatory, with two samples required for visual, dimensional, and shade examination, followed by an evaluation period of up to thirty days. Acceptance and inspection will be conducted at the destination in accordance with FAR 52.246-2 Standard Inspection, with removal of government identification from any non-accepted supplies required. Delivery is expected within 20 days to the specified DLA Troop Support location in Philadelphia, and shipment must be traceable and exclude parcel post services. Packaging must adhere to ASTM D3951 while giving precedence to DLA’s Master List of Technical and Quality Requirements. The contract is a simplified acquisition with a single unit ordered (1 EA), and it mandates compliance with cybersecurity self-assessment at CMMC Level 2. The contract is managed by the Department of Defense under NAICS code 314999, with a primary contact provided for coordination. All technical references, amendments, and revisions are controlled by the dates and conditions stated, ensuring thorough adherence to DoD standards.
General Info
Agency
NAICS
Place of Performance
USSet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
FLAG, ROTC, JUNIOR, HIGH SCHOOL
3FT X 4FT.
MADE IAW DRAWING 5-9-1 AND 5-9-1A
MADE IAW SPECIFICATION MIL-DTL-2692
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
IT IS RECOMMENDED THAT TWO EACH FIRST ARTICLE SAMPLES OF THE END ITEM(S)
BE SUBMITTED TO THIS CENTER FOR VISUAL, DIMENSIONAL AND SHADE
EXAMINATIONS. THIRTY DAYS WILL BE REQUIRED TO EXAMINE AND EVALUATE THE
SAMPLES AND TO FURNISH THE RESULTS AND DIRECTIONS REGARDING PRODUCTION
TO THE CONTRACTOR.
INSPECTION OF SUPPLIES SHALL BE IN ACCORDANCE WITH FAR PART 52.246-2
STANDARD INSPECTION.
ADDITIONAL INFORMATION FOR MIL-STD-105E:
MIL-STD-105E, dated 10 May 1989, is hereby canceled.
Future acquisitions may refer to: MIL-STD-1916, "DoD Preferred Methods for Acceptance of Product," or ANSI/ASQ Z1.4, "Sampling Procedures and Tables for Inspection by Attributes."
Users are cautioned to evaluate these documents for their particular application before citing it as a replacement document.
(Copies of MIL-STD-1916 are available online at http://assist.daps.dla.mil http://assist.daps.dla.mil or from the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
(Copies of ANSI/ASQ Z1.4 are available online at http://www.asq.org http://www.asq.org or ASQ Distribution Center, 5131 S. Third Street, Milwaukee, Wisconsin 53207-6028.)
ADDITIONAL INFORMATION FOR ANSI/ASQC Z1.4: NOTE: THE MOST RECENT VERSION OF THIS DOCUMENT SHOULD BE USED. APPLICATION FOR COPIES SHOULD BE ADDRESSED TO: AMERICAN SOCIETY FOR QUALITY 600 NORTH PLANKINTON AVENUE MILWAUKEE, WISCONSIN 53203
SPE1C1-26-T-1111
SECTION B
(Ref. T0795 May 17, 2006) Two (2) First Article samples are required. First Article Testing shall be performed and the contractor will be notified in writing within thirty (30) calendar days after Contracting Officer's receipt of First Article samples.
RD002, COVERED DEFENSE INFORMATION APPLIES
01 DELIVER ASAP
02 FLAG – ROTC, JUNIOR, HIGH SCHOOL
03 USE DOC NO. FOR W5040B
04 W5040B61190001
05 AYC
IAW BASIC SPEC NR MIL-DTL-2692K
REVISION NR K DTD 07/12/2024
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 22571 5-9-1A
REVISION NR C DTD 05/22/2009
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 22751 5-9-1
REVISION NR DTD
PART PIECE NUMBER:
IAW REFERENCE SPEC NR MIL-PRF-20696G
REVISION NR G DTD 09/21/2022
PART PIECE NUMBER:
IAW REFERENCE SPEC NR MIL-DTL-15011K(2) NOT 1
REVISION NR 2 DTD 04/29/2025
PART PIECE NUMBER:
IAW REFERENCE SPEC NR MIL-DTL-32075A
REVISION NR A DTD 10/01/2020
PART PIECE NUMBER:
IAW REFERENCE STD NR MIL-STD-129R(3)
REVISION NR R DTD 02/25/2023
PART PIECE NUMBER:
IAW REFERENCE STD NR MIL-STD-147F NOT 1
REVISION NR F DTD 09/05/2024
PART PIECE NUMBER:
IAW REFERENCE STD NR MIL-STD-1916 NOT 2
REVISION NR DTD 06/05/2014
PART PIECE NUMBER:
IAW REFERENCE CID A-A-52094B NOT 1
REVISION NR B DTD 02/29/2024
PART PIECE NUMBER:
IAW REFERENCE CID A-A-59709
REVISION NR DTD 09/13/2021
PART PIECE NUMBER:
IAW REFERENCE UNK NN-P-71C(1) NOT 1
REVISION NR 1 DTD 12/20/1973
PART PIECE NUMBER:
IAW REFERENCE UNK FED-STD-191A(6) NOT 7
REVISION NR A DTD 08/09/2000
PART PIECE NUMBER:
IAW REFERENCE NON GOVT STD ANSI/ASQC Z1.4-2003
SPE1C1-26-T-1111
SECTION B
REVISION NR DTD 01/01/2003
PART PIECE NUMBER:
IAW REFERENCE NON GOVT STD ASTM D5118/D5118M
REVISION NR DTD 01/01/2025
PART PIECE NUMBER:
IAW REFERENCE NON GOVT STD ASTM D6193-16
REVISION NR DTD 01/01/2016
PART PIECE NUMBER:
IAW REFERENCE NON GOVT STD NASM16491
REVISION NR 2 DTD 02/29/2016
PART PIECE NUMBER:
IAW REFERENCE CID A-A-59826A NOT 1
REVISION NR A DTD 09/20/2022
PART PIECE NUMBER:
IAW REFERENCE NON GOVT STD ASTM D1974/D1974M
REVISION NR DTD 05/01/2022
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016699177 0001 EA 1.000
NSN/MATERIAL:8345015902312
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IN THE CLEAR:
DLA TROOP SUPPORT
700 ROBBINS AVE.
SPE1C1-26-T-1111
SECTION B
PR: 7016699177 PRLI: 0001 CONT’D
ATTN: JOHN FRICKER, 3-B-5128
PHILADELPHIA PA 19111
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) W5040B61190001
RDD:
PROJ: TP 3
SUPP ADD: W5040B SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A0E DIST: N/A ADV: FC: ZZ
Need Ship Date:00/00/0000 Original Required Delivery Date:05/12/2026
SPE1C1-26-T-1111 NSN/Part Number: 8345-01-590-2312 Quantity: 1 EA Purchase Request: 7016699177QTY: 1 Delivery: 20 days ADO
