FLAG, SIGNAL

"FLAG, SIGNAL, ALPHABETIC INTERNATIONAL CODE " "ACRYLIC BUNTING, SIZE 4, LETTER U " "4 FT. 4 1/2 IN. HOIST, 4 FT.4 1/2 IN FLY " "TYPE I, CLASS 1A HEADING " MADE IAW SPEC MIL-DTL-269 MADE IAW DRAWING 16696-7A RP001:DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BYAN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THEWEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER INEFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ONTHE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATECONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATIONCHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ006: QUALITY CONFORMANCE INSPECTIONREQUIREMENTS
INSPECTION AND ACCEPTANCE AT DESTINATION.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTEDSUPPLIES
RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION (AUG 2016) This item requires supply chaintraceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply ChainTraceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
INSPECTION OF SUPPLIES SHALL BE IN ACCORDANCE WITH FAR PART 52.246-2 STANDARD INSPECTION.
ADDITIONAL INFORMATION FOR MIL-STD-105E:
MIL-STD-105E, dated 10 May 1989, is herebycanceled.
Future acquisitions may refer to: MIL-STD-1916, "DoD Preferred Methods for Acceptance of Product," or ANSI/ASQZ1.4, "Sampling Procedures and Tables for Inspection by Attributes."
Users are cautioned to evaluate these documents for theirparticular application before citing it as a replacement document.
(Copies of MIL-STD-1916 are available onlineat http://assist.daps.dla.mil http://assist.daps.dla.mil or from the Standardization Document Order
SPE1C1-26-Q-0484
SECTION B
SUPPLY/SERVICE: PGC: 31566 CONT'D
Desk, 700 Robbins Avenue, Building 4D, Philadelphia,PA 19111-5094.)
(Copies of ANSI/ASQ Z1.4 are available online at http://www.asq.org http://www.asq.org or ASQ Distribution Center, 5131 S. Third Street,Milwaukee, Wisconsin 53207-6028.)
ADDITIONAL INFORMATION FOR ANSI/ASQC Z1.4: NOTE: THE MOST RECENT VERSION OF THIS DOCUMENT SHOULD BE USED. APPLICATION FOR COPIES SHOULD BE ADDRESSED TO: AMERICAN SOCIETY FOR QUALITY 600 NORTH PLANKINTON AVENUE MILWAUKEE,WISCONSIN 53203
(Ref. T0795 May 17, 2006) Two (2) First Article samples are required. First Article Testing shall be performedand the contractor will be notified in writing within thirty (30) calendar days after Contracting Officer's receipt of First Article samples.
RD002, COVERED DEFENSE INFORMATION APPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDEDTO<(>,<)> OR COME IN DIRECT CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONALMERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSISREAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF ANDCONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
IT IS RECOMMENDED THAT TWOEACH FIRST ARTICLE SAMPLES OF THE END ITEM(S) BE SUBMITTED TO THIS CENTER FOR VISUAL, DIMENSIONAL AND SHADE EXAMINATIONS. THIRTYDAYS WILL BE REQUIRED TO EXAMINE AND EVALUATE THE SAMPLES AND TO FURNISH THE RESULTS AND DIRECTIONS REGARDING PRODUCTION TO THECONTRACTOR.
CRITICAL APPLICATION ITEM
IAW BASIC SPEC NR MIL-DTL-2692K REVISION NR K DTD 07/12/2024 PART PIECE NUMBER:
IAWREFERENCE DRAWING NR 22571 16696-7A REVISION NR G DTD 06/18/1971 PART PIECE NUMBER:
IAW REFERENCE SPEC NR MIL-PRF-20696G REVISION NR G DTD 09/21/2022 PART PIECE NUMBER:
IAW REFERENCE SPEC NR MIL-DTL-226G NOT 2 REVISION NR G DTD 01/04/2024 PART PIECENUMBER:
IAW REFERENCE SPEC NR MIL-DTL-713F(1) NOT 1 REVISION NR 1 DTD 04/03/2023 PART PIECE NUMBER:
IAW REFERENCE SPEC NRMIL-DTL-15011K(1) NOT 1 REVISION NR 1 DTD 02/24/2023 PART PIECE NUMBER:
IAW REFERENCE SPEC NR MIL-DTL-15021B NOT 1 REVISION NR B DTD 09/12/2019 PART PIECE NUMBER:
IAW REFERENCE SPEC NR MIL-PRF-17343E NOT 1 REVISION NR E DTD 11/07/2022 PART PIECENUMBER:
SPE1C1-26-Q-0484
SECTION B
SUPPLY/SERVICE: PGC: 31566 CONT'D
IAW REFERENCE SPEC NR MIL-DTL-22775E REVISION NR E DTD 05/16/2023 PART PIECE NUMBER:
IAW REFERENCE SPEC NR MIL-DTL-32072 NOT 1 REVISION NR DTD 03/02/2017 PART PIECE NUMBER:
IAW REFERENCE SPEC NR MIL-DTL-32075A REVISION NR A DTD 10/01/2020 PARTPIECE NUMBER:
IAW REFERENCE STD NR MIL-STD-105E NOT 3 REVISION NR E DTD 02/06/2008 PART PIECE NUMBER:
IAW REFERENCE STD NRMIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER:
IAW REFERENCE STD NR MIL-STD-147E(3) REVISION NR E DTD09/05/2024 PART PIECE NUMBER:
IAW REFERENCE STD NR MIL-STD-1916 NOT 2 REVISION NR DTD 06/05/2014 PART PIECE NUMBER:
IAWREFERENCE CID A-A-52094B NOT 1 REVISION NR B DTD 02/29/2024 PART PIECE NUMBER:
IAW REFERENCE UNK NN-P-71C(1) NOT 1 REVISION NR 1 DTD 04/30/1976 PART PIECE NUMBER:
IAW REFERENCE UNK CCC-C-419G NOT 1 REVISION NR G DTD 05/23/2000 PART PIECE NUMBER:
IAWREFERENCE UNK PPP-B-636J(4) NOT 1 REVISION NR 4 DTD 03/01/1994 PART PIECE NUMBER:
IAW REFERENCE UNK FED-STD-191A(6) NOT7 REVISION NR A DTD 08/09/2000 PART PIECE NUMBER:
IAW REFERENCE UNK FED-STD-751A(1)(1) NOT 2 REVISION NR 1 DTD 09/14/1999 PARTPIECE NUMBER:
IAW REFERENCE NON GOVT STD ANSI/ASQC Z1.4-2003 REVISION NR DTD 01/01/2003 PART PIECE NUMBER:
IAW REFERENCE NONGOVT STD ASTM D-6193 REVISION NR DTD 01/01/2011 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT. 0001 8345-00-926-9985 2,000.000 EA $ _______________ $ ______________ FLAG,SIGNAL
SPE1C1-26-Q-0484
SECTION B
SUPPLY/SERVICE: PGC: 31566 CONT'D
PRICING TERMS: Firm Fixed Price
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: DESTINATION DELIVERY DATE: 120 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:ZZ WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNNTHKNESS:C UNIT CONT:ZZ OPI:O INTRMDTE CONT:ZZ INTRMDTE CONT QTY:XXX PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITHMIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking
PRES/PACK LEVELS SHALL BE A/C IN ACCORDANCE WITH MIL-F-2692. SHIPPING CONTAINER QTY 12 SHALL BE IN ACCORDANCE WITH MIL-F-2692. .
PARCEL POST ADDRESS:
UY8615
ARIZONA INDUSTRIES FOR THE BLIND 515 N 51ST AVENUE NUMBER 130 DOCK 1 PHOENIX AZ 85043 US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
UY8615
ARIZONA INDUSTRIES FOR THE BLIND 515 N 51ST AVENUE NUMBER 130 DOCK 1 PHOENIX AZ 85043 US
GOVT USE External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0001 7017946772 0001 N/A N/A N/A 01/19/2027

SPE1C1-26-Q-0484 NSN/Part Number: 8345-00-926-9985 Quantity: 2,000 EA Purchase Request: 7017946772QTY: 2000 Delivery: 120 days ADO