Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Solicitation opportunity from Utah was posted on September 16, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Flight Type Dish Machine

Closed
KL25-16State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333248
New
DIBBS
Supply of Hub and Pin Assemblies (NSN 6930-01-131-7216)This subcontract involves the manufacture or sourcing of 10 Hub and Pin Assemblies under NSN 6930-01-131-7216 for prime contractors supporting Defense Logistics Agency supply contracts. The selected provider must ensure all assemblies meet strict technical specifications and DLA quality and inspection standards. Additionally, the contractor is responsible for packaging and labeling items in accordance with DFARS 252.223-7001 and coordinating delivery through the First Destination Transportation program. The opportunity is categorized under NAICS code 333248 and requires the contractor to have a CMMC Level 2 Self-Assessment. Interested parties must submit their responses by November 9, 2026, to support the Department of Defense requirements.
Defense Logistics Agency

POSTED

about 13 hours ago

DEADLINE

in 11 days
NAICS: 333248
New
DIBBS
Supply of Hand-Operated Drum WinchesThis subcontract involves the procurement of 16 hand-operated drum winches to support prime contractors fulfilling Department of Defense supply contracts. The required equipment must strictly adhere to NSN 3950-01-595-4485 and part number DL1602A specifications. Additionally, the supplier is responsible for ensuring full compliance with the DLA Master List of Technical and Quality Requirements and providing all necessary EPA-approved Consumer Information Sheets. The final delivery of the 16 units is designated for DLA Distribution DDSP located in New Cumberland, Pennsylvania. This opportunity falls under NAICS code 333248 and is managed through the Department of Defense. Interested parties must meet the specified technical standards to ensure the equipment is suitable for its intended military supply application.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 13 hours ago

DEADLINE

in 11 days
NAICS: 333248
New
DIBBS
Borosilicate Microscope Cover Glass SupplyThis subcontract involves the supply of borosilicate microscope slide cover glass to prime contractors supporting the Department of Defense Medical Supply Chain FSH. The required glass must be optically clear, colorless, and non-fogging, measuring 22mm by 22mm with a thickness of number one in accordance with DLA RA001 requirements. The order consists of four packages, each containing ten 1oz containers, which must be packaged and labeled according to MIL-STD-2073-1E and Medical Marking Standard No. 1. Delivery is specified as FOB Destination to Fort Bragg, North Carolina. The procurement falls under NAICS code 333248.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 13 hours ago

DEADLINE

in 6 days
NAICS: 333248
New
DIBBS
TEST KIT, LEAD DETERMIN
Solicitation # SPE2DH-27-T-0302
Solicitation SPE2DH-27-T-0302, issued by the DLA Troop Support Medical Supply Chain FSH, is for the procurement of one package of lead determination test kits (NSN 6640-01-455-9311). Each package must contain 100 ion-specific test strips capable of 100 determinations within a range of 20 to 500 PPM. The items must have a shelf life of 24 months, with a strict requirement that no more than three months have elapsed from the date of manufacture to the date of delivery to the government. Delivery is required within 20 days after receipt of order (ADO) to Eglin AFB, Florida, under FOB Destination terms. The contractor must adhere to rigorous labeling and packaging standards, including Medical Marking Standard No. 1 and MIL-STD-2073-1E. Labels must clearly display the NSN, manufacturer, CAGE code, contract or lot number, and relevant manufacture or expiration dates. Because the items may be classified as hazardous materials, packaging must comply with 49 CFR, ICAO, and IMDG regulations, with certifications provided on the DD Form 250. The contract incorporates various FAR and DFARS clauses, including the Buy American Act, NIST SP 800-171 cybersecurity requirements, and destination inspection per FAR 52.246-2. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 13 hours ago

DEADLINE

in 6 days
NAICS: 333248
New
DIBBS
CUVETTE, BLOOD SAMPLE
Solicitation # SPE2DH-27-T-0314
This solicitation, issued by the Department of Defense Medical Supply Chain FSH, is for the procurement of two boxes of HB 201 microcuvettes (NSN 6640-01-671-4541) for use with the HemoCue HB 201 Plus Analyzer for hemoglobin point-of-care testing. Each box contains 200 units. The items must have a shelf life of 24 months, and no more than three months may have elapsed from the date of manufacture to the date of delivery to the government. Storage requirements are strictly set between 15 to 30 degrees Celsius (59 to 86 degrees Fahrenheit). Delivery is required within 85 days after receipt of order, with the destination point located in Germany and the United States. The contract requires adherence to Medical Marking Standard No. 1, and labels must include the NSN, manufacturer CAGE code, date of manufacture, expiration or retest date, and the contract or lot number. Packaging must be commercial and compliant with MIL-STD-2073-1E. Bidders must specify the source and part number being supplied, and any alternate offers require a complete data package for evaluation. The procurement is subject to various FAR and DFARS clauses, including those regarding the Buy American Act, safeguarding covered defense information, and the prohibition of covered defense telecommunications equipment. Invoicing and payment must be processed through the Wide Area WorkFlow system.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 13 hours ago

DEADLINE

in 6 days
NAICS: 333248
New
DIBBS
WINCH, DRUM, HAND OPERAT
Solicitation # SPE8EE-27-T-0335
Solicitation SPE8EE-27-T-0335, issued by the DLA Troop Support Construction and Equipment Manufacturing and Contracting office, is for the procurement of 16 hand-operated drum winches (NSN 3950-01-595-4485). The contract specifies a delivery period of 167 days after order, with an original required delivery date of March 21, 2027, and a need ship date of April 26, 2027. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, while ensuring that DLA Master List technical and quality requirements take precedence. Each shipment must include an EPA-approved Consumer Information Sheet. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The procurement is governed by various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and prohibitions on certain telecommunications equipment. The assigned NAICS code for this effort is 333248.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 13 hours ago

DEADLINE

in 11 days
NAICS: 333248
New
DIBBS
BRAKE STOP
Solicitation # SPE8EE-27-T-0317
Solicitation SPE8EE-27-T-0317 is a request for quotations from the Defense Logistics Agency for the procurement of 122 units of Brake Stop hardware, identified by NSN 3950015491037. The requirement is governed by NAICS code 333248 and specifies a delivery lead time of 167 days after order, with an original required delivery date of February 2, 2027. Delivery is to be made to DLA Distribution San Joaquin in Tracy, California, with both inspection and acceptance occurring at the destination. The contractor must adhere to strict quality and packaging standards, including ASTM D3951 and MIL-STD-129, while ensuring compliance with DLA Master List requirements and RP001 for palletization. Special technical constraints include the prohibition of intentionally added mercury and the requirement to remove government identification from non-accepted supplies. Administratively, the contract utilizes the Wide Area WorkFlow system for electronic invoicing and incorporates various FAR and DFARS clauses covering cybersecurity, the Buy American Act, and safeguarding of covered defense information. Quotations are due by November 9, 2026, and may be submitted via the DIBBS portal.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 13 hours ago

DEADLINE

in 11 days
NAICS: 333248
New
DIBBS
HOIST, HOOK
Solicitation # SPE8EE-27-T-0334
Solicitation SPE8EE-27-T-0334 is a request for quotations issued by the Department of Defense, specifically DLA Troop Support Construction and Equipment Manu and Con, for the procurement of six units of hook hoists under NSN 3950-01-609-4265. The requirement specifies that only new, unused, and non-refurbished material will be accepted. The delivery is required within 167 days after order, with a need ship date of April 26, 2027, and a final required delivery date of April 30, 2027. The items are to be delivered FOB Origin to the DLA Distribution San Joaquin facility in Tracy, California, where both inspection and acceptance will take place. The contract incorporates strict technical and quality requirements, including adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Palletization must follow RP001 standards, specifically requiring the use of government or wing tip pallets, as non-government cannery pallets are prohibited. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. This procurement is not a small business set-aside and requires compliance with the Buy American Act, the Berry Amendment, and various DFARS clauses regarding cybersecurity, the prohibition of covered defense telecommunications equipment, and the safeguarding of covered defense information.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 13 hours ago

DEADLINE

in 11 days
NAICS: 333248
New
DIBBS
CAPTURE FRAME, BRACKET
Solicitation # SPE8EE-27-T-0326
Solicitation SPE8EE-27-T-0326 is a Request for Quotations issued by the Department of Defense, specifically DLA Troop Support, Construction and Equipment Manu and Con, for the procurement of six capture frame brackets under NSN 3950-01-573-7388. The items are to be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with a delivery schedule of 167 days after order. The procurement is conducted under the First Destination Transportation program with FOB Origin terms. The contract is governed by NAICS code 333248 and includes stringent technical and quality requirements as defined in the DLA Master List, with specific packaging and marking standards including ASTM D3951 and MIL-STD-129. Compliance with the Buy American Act and Berry Amendment is required. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and adherence to various FAR and DFARS clauses regarding cybersecurity, safeguarding covered defense information, and the prohibition of covered defense telecommunications equipment. Inspection and acceptance will occur at the destination.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 13 hours ago

DEADLINE

in 11 days
NAICS: 333248
New
DIBBS
MOLD RELEASE AGENT
Solicitation # SPE8ES-27-T-0208
Solicitation SPE8ES-27-T-0208 is a request for quotations from the Defense Logistics Agency for the procurement of one 5-gallon can of mold release agent, identified by NSN 8030-01-233-1265. The requirement specifies a non-extendable shelf life of 12 months and requires storage temperatures between 60 and 80 degrees Fahrenheit. Delivery is required within five days after order, with a required delivery date of October 29, 2026, shipped FOB Destination to locations in Illinois and the US APO AE. The contractor must adhere to strict hazardous materials protocols, including the submission of Safety Data Sheets and labels compliant with 29 CFR 1910.1200 for review prior to award. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with specific palletization requirements under RP001. Inspection and acceptance will occur at the destination. Invoicing must be processed electronically through the Wide Area WorkFlow system. This procurement is subject to various federal regulations, including the Buy American Act, Berry Amendment, and safeguarding requirements for covered defense information. Quotations must be submitted via the DIBBS portal by November 3, 2026.
Defense Logistics Agency

POSTED

about 13 hours ago

DEADLINE

in 5 days
NAICS: 333248
New
DIBBS
COVER GLASS, MICROSCOPE
Solicitation # SPE2DH-27-T-0307
Solicitation SPE2DH-27-T-0307 is a small business set-aside request for quotations issued by the DLA Troop Support Medical Supply Chain FSH for the procurement of microscope slide cover glass, identified by NSN 6640-01-718-7221. The requirement is for four packages, with each package containing ten 1oz containers of high-quality, non-fogging, and non-corrosive borosilicate glass. The cover glass must be optically clear, colorless, and exhibit low auto-fluorescence, with dimensions of 22mm x 22mm and a thickness of #1 (0.13mm to 0.17mm). Delivery is required within 20 days after the order is placed, with a destination of Fort Bragg, North Carolina, under FOB Destination terms. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and Medical Marking Standard No. 1 for labeling. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements (RA001). Administrative requirements include electronic invoicing via the Wide Area WorkFlow (WAWF) system and compliance with the Buy American Act and DFARS domestic material restrictions. Inspection and acceptance will occur at the destination per FAR 52.246-2. Quotations must be submitted by November 4, 2026, to the issuing office in Philadelphia, Pennsylvania.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 13 hours ago

DEADLINE

in 6 days
NAICS: 333248
New
Federal
Goo Grinder Overhead Reservoir Metering SystemThis subcontract opportunity is for the provision of Goo Grinder Overhead Reservoir Metering Systems to support prime contractors on W6QM Micc-Ft Drum industrial equipment projects for the Department of Defense. The required systems must be manufactured using gear pumps and chain drives capable of metering non-abrasive materials with viscosities ranging from 300 to 50,000 cps. Technical specifications require an output of up to 1.5 quarts per minute and adjustable ratios between 1:1 and 6:1 via drive sprockets, ensuring full compliance with Michael Engineering Part GG-OH specifications. The contract is designated as a total Small Business Set Aside under NAICS code 333248. The selected provider is responsible for delivering fully assembled and tested metering systems to the place of performance in zip code 74501. Interested parties should note the response deadline of October 30, 2026.
W6QM Micc-Ft Drum

POSTED

about 18 hours ago

DEADLINE

in 1 day

General Info

Agency

Utah

NAICS

333248 - All Other Industrial Machinery Manufacturing

Place of Performance

UT, USA

Set-Aside

NONE

Documents

1

KL25-16 Flight Type Dish Machine

PDF, High priority: read this firstifb
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

1 update
PhaseClosed
Posted

Solicitation

Deadline changed

Response deadline changed from Oct 7, 2024 to Oct 22, 2024.

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyUtah
Contacts1 person available
OfficeN/A
Organization / AgencyUtah
Office AddressN/A
Contacts
Kevin Lucus
contact@example.gov

Full Description

Show more
The Central Utah Correctional Facility is in need of a flight type dish machine.

More opportunities from Utah

Same awarding agency

NAICS: 237310
New
SLED
Underground Utilities (Wet/Dry)This subcontract for underground utilities focuses on the Salem Kinder Expansion school project in Utah. The scope of work involves providing comprehensive wet and dry utility installation, including the trenching, laying, and connecting of sanitary sewers, storm drains, and electrical conduits. The selected contractor is responsible for delivering fully installed and tested underground utility lines to the prime contractor. The opportunity is categorized under NAICS code 237310 and was posted on October 26, 2026. Interested parties must submit their responses by the deadline of November 5, 2026. All project coordination and submissions are managed through the Utah Bonfire hub.
Highway, Street, and Bridge Construction

POSTED

2 days ago

DEADLINE

in 7 days
View Details
NAICS: 327320
New
SLED
Ready-Mix Concrete SupplyThis subcontract agreement concerns the supply of ready-mix concrete for prime contractors working on Utah school expansion projects, with a specific focus on the Salem Kinder Expansion. The selected provider will be responsible for manufacturing and delivering concrete mixes that adhere to project strength specifications, utilizing mixer trucks to transport the required volume of material directly to the project site. The opportunity is categorized under NAICS code 327320 and was posted by the state of Utah. Interested parties must submit their responses by the deadline of November 5, 2026.
Ready-Mix Concrete Manufacturing

POSTED

2 days ago

DEADLINE

in 7 days
View Details
NAICS: 238110
New
SLED
Concrete Foundations and FootingsThis subcontract for Concrete Foundations and Footings involves the installation of structural foundation systems for the Salem Kinder Expansion school project in Utah. The scope of work requires the contractor to perform formwork installation as well as the placing and finishing of concrete for foundation walls, slabs-on-grade, and footings to deliver a completed structural concrete foundation. The opportunity is categorized under NAICS code 238110 and was posted on October 26, 2026. Interested parties must submit their responses by the deadline of November 5, 2026.
Poured Concrete Foundation and Structure Contractors

POSTED

2 days ago

DEADLINE

in 7 days
View Details
NAICS: 238910
New
SLED
Site Work and EarthmovingThis subcontract for Site Work and Earthmoving involves comprehensive site preparation for the Salem Kinder Expansion school project in Utah. The scope of work includes clearing and grubbing, rough and fine grading, excavation for foundations, and the hauling of spoils to ensure the site is fully prepared for foundation installation. The opportunity was posted on October 26, 2026, with a response deadline of November 5, 2026. Classified under NAICS code 238910, the contract is managed through the state of Utah and requires the selected subcontractor to deliver a graded site ready for subsequent construction phases.
Site Preparation Contractors

POSTED

2 days ago

DEADLINE

in 7 days
View Details
New
SLED
COURTESY POSTING: Subcontractor Bidding for Salem Kinder Expansion (BMC)
Solicitation # 26-Sal-HSEXP-BMC
BMC is soliciting bids for subcontractors to support the Salem Kinder Expansion project in Utah under solicitation number 26-Sal-HSEXP-BMC. This is a courtesy posting, and the procurement is being conducted directly by BMC rather than the Division of Purchasing. Interested parties must submit their bids on company letterhead via Procore or email to [email hidden] by the response deadline of November 5, 2026. All inquiries and bid submissions should be directed to the BMC estimating department. Bidders are explicitly instructed not to submit responses through the Bonfire portal. Because this is a courtesy advertisement, the final contract award will not be posted on the public website, and vendors must coordinate directly with the designated BMC office to determine the outcome of the solicitation.

POSTED

2 days ago

DEADLINE

in 7 days
View Details
New
SLED
Final Design Services - 1800 South Trail
Solicitation # 26-299
Weber County Corporation is soliciting proposals from qualified firms or teams to provide professional land surveying and final design services for a pedestrian trail project located along 1800 South and 3500 West in Utah. The selected consultant will be responsible for the technical design and surveying necessary to complete the trail, with the county evaluating submissions based on specific qualification criteria to ensure the most capable team is chosen. This solicitation, identified as number 26-299, was posted on October 26, 2026, and requires all responses to be submitted by the deadline of November 19, 2026. Interested parties must adhere to the evaluation criteria outlined in the official request for proposals to be considered for the contract.

POSTED

2 days ago

DEADLINE

in 22 days
View Details
NAICS: 541340
New
SLED
Landscape Architecture & Irrigation DesignThis subcontract for Landscape Architecture and Irrigation Design involves performing landscape redesign for prime contractors on Sandy City facility projects. The scope of work specifically targets the north hillside, southwest corner, and west stair and ramp areas, requiring the execution of plant selection, hillside stabilization, and irrigation system design. All work must be completed in accordance with Sandy City Division 7 Landscaping and Irrigation requirements. The selected contractor is responsible for delivering signed and sealed landscape and irrigation design documents. This opportunity is categorized under NAICS code 541340 and is associated with the state of Utah. Interested parties must adhere to the response deadline of November 6, 2026.
Drafting Services

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 541330
New
SLED
Electrical Engineering DesignThis electrical engineering design subcontract involves providing specialized design services for prime contractors working on facility projects within Sandy City, Utah. The scope of work focuses on the development of exterior lighting, power supply systems for hydronic snowmelt, and various electrical site improvements specifically for landscape areas, ramps, and stairs. The selected contractor is responsible for delivering comprehensive technical specifications and construction drawings that are both signed and sealed. This opportunity falls under NAICS code 541330, with a response deadline set for November 6, 2026.
Engineering Services

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 541330
New
SLED
Mechanical Engineering (Hydronic Snowmelt Systems)This subcontract for Mechanical Engineering focuses on the design of hydronic snowmelt systems for Sandy City facility projects in Utah. The selected contractor will be responsible for creating systems that prevent ice and snow accumulation on ramps and stairs by designing detailed piping layouts, specifying heat sources, and developing control systems that integrate seamlessly with existing building utilities. The primary deliverables for this engagement include the provision of signed and sealed construction drawings, mechanical design documents, and comprehensive technical specifications. Interested parties must adhere to the response deadline of November 6, 2026, for this project categorized under NAICS code 541330.
Engineering Services

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 541330
New
SLED
Civil Engineering DesignThis subcontract opportunity is for civil engineering design services to support prime contractors on facility projects within Sandy City, Utah. The selected provider will be responsible for conducting detailed site analyses and developing grading and drainage plans specifically designed to integrate ADA-compliant ramps and stairs into the existing site topography. The primary deliverables for this engagement include the provision of signed and sealed construction drawings, civil design documents, and comprehensive technical specifications. Interested parties should note that the response deadline for this opportunity is November 6, 2026.
Engineering Services

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 541330
New
SLED
Structural Engineering DesignThis structural engineering design subcontract involves providing specialized analysis and design services for prime contractors working on Sandy City facility projects in Utah. The scope of work specifically focuses on the replacement of the City Hall west stair and the installation of an ADA-compliant pedestrian ramp. The selected contractor is responsible for developing all necessary structural calculations, detailed drawings, and technical specifications to ensure full compliance with applicable building codes. The primary deliverables for this engagement are signed and sealed construction drawings and comprehensive structural design documents. This project falls under NAICS code 541330, with a response deadline set for November 6, 2026.
Engineering Services

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 541310
New
SLED
Sandy City - Architectural Design for City Hall Stairs, Ramp, and Landscape
Solicitation # GJ27-124
Sandy City is soliciting proposals for professional architectural design services under solicitation GJ27-124 to improve Sandy City Hall, located at 10000 South Centennial Parkway, Utah. The scope of work involves the replacement of the west stairs, the construction of an ADA-compliant pedestrian ramp, and a comprehensive landscape redesign of the north hillside and southwest corner. Key technical requirements include the design of a complete hydronic snowmelt system with a new boiler integrated into the City's Alerton building automation system, as well as landscaping that adheres to Waterwise design principles and Sandy City's Division 7 Landscaping and Irrigation standards. The selected architect will be responsible for providing preliminary concepts, 60% and 90% design submissions, and final bid-ready construction documents, along with cost estimates at each milestone. The project operates on a strict timeline, with 100% complete construction documents due by February 1, 2027, and a final project completion goal of June 30, 2027. The architect is also required to participate in a warranty walk approximately 10 months after substantial completion. Proposals must be submitted as a fixed, lump-sum fee via the sandycity.ionwave.net portal. The deadline for submitting written questions is November 4, 2026, at 11:30 AM MT, and the final closing date for bid submissions is November 6, 2026, at 11:30 AM MT. Evaluation will be based on a 100-point criteria system, and the design must ensure continued safe public access and building egress as City Hall will remain operational throughout the construction process.
Architectural Services

POSTED

2 days ago

DEADLINE

in 9 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS