Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

FLOOR, AIRCRAFT

Active
SPE4A7-26-T-580SFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of a single aircraft floor component, identified by part number 141T5954-148 and NSN 1560016558368, for delivery to Travis Air Force Base, California. The item is designated as a critical application part and must comply with stringent technical and quality specifications referenced from the DLA Master List of Technical and Quality Requirements, which governs compliance for both simplified and large acquisitions depending on timing of solicitation and award. The contractor is required to adhere to DLA packaging standards per MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking codes applied, and must follow the DLA Packaging Requirements for Procurement for palletization. Supply chain traceability documentation must be retained by the contractor as mandated by DLAD Procurement Note C03, and while Item Unique Identification is not required, the product must meet FAA Bare Item Marking Requirements and obtain Federal Aviation Administration Airworthiness Approval as specified in RQ019. Sampling procedures must conform to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless explicitly permitted otherwise. The item must be delivered within 20 days from the contract award, FOB origin, with inspection and acceptance occurring at destination. Delivery is to occur by the fastest traceable means—parcel post is explicitly prohibited. The unit of issue is each, with a fixed quantity of one, and no variance in quantity is allowed. The contract references a Certificate of Airworthiness and Conformance for FAA Certified Parts and imposes configuration change management through engineering change proposal and variance request processes. Technical data and compliance documentation are governed by the Technical Data Package associated with solicitation SPE4A7-26-T-580S, and compliance with Cybersecurity Maturity Model Certification Level 2 is required through a contractor self-assessment. Coverage extends to Covered Defense Information, and the contractor must ensure all documentation adheres to federal aviation and defense procurement standards, with delivery directed to Travis AFB under the designated freight and parcel addresses, and must meet the original required delivery date of July 1, 2026.

General Info

One aircraft floor component, part 141T5954-148, to Travis AFB by July 1, 2026, FAA-approved, DLA-compliant, CMMC Level 2, zero defects.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

PR: 7017379586 PRLI: 0001 CONT’D, TRAVIS AFB, CA, 94535-2918, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A7-26-T-580S DLA Aviation Jul 20 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Lacresha Ellis
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
FLOOR,AIRCRAFT
FLOOR,AIRCRAFT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RP003: PRESERVATION, PACKAGING, PACKING AND MARKING REQUIREMENTS FOR
FEDERAL AVIATION ADMINISTRATION COMMERICAL MATERIAL
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION
(AUG 2016)
This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply Chain Traceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ046: FAA Bare Item Marking Requirements
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for
SPE4A7-26-T-580S
SECTION B
additional information.
Certificate of Airworthiness and Conformance for FAA Certified Parts and Commercial Derivative Aircraft Part
RQ019: Federal Aviation Administration (FAA) Airworthiness Approval
The Product Specialist should add note “Refer to Proc Note L32 for higher level quality requirements” to the POT in lieu of any high er-level quality STO.
CRITICAL APPLICATION ITEM
THE BOEING COMPANY 81205 P/N 141T5954-148
IAW REFERENCE REVISION NR DTD PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017379586 0001 EA 1.000
NSN/MATERIAL:1560016558368
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
FB4427
FB4427 60 APS TRC
CP 707 424 5480
90 RAGSDALE ST BLDG 977
SPE4A7-26-T-580S
SECTION B
PR: 7017379586 PRLI: 0001 CONT’D
TRAVIS AFB CA 94535-2918
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FB4427
FB4427 60 APS TRC
CP 707 424 5480
90 RAGSDALE ST BLDG 977
TRAVIS AFB CA 94535
US
M/F: (TCN) FB442761770019
RDD: 207
PROJ: TP 2
SUPP ADD: YBQ323 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A0A DIST: 01 ADV: 2D FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:07/01/2026
SPE4A7-26-T-580S NSN/Part Number: 1560-01-655-8368 Quantity: 1 EA Purchase Request: 7017379586QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
Government First Article Testing (FAI) ServicesThe contract requires comprehensive First Article Inspection services for 43 structural components, encompassing detailed documentation, conformance reporting, and close coordination with government inspectors to ensure all requirements are met. The work is performed under a subcontract in support of the Defense Logistics Agency, a component of the Department of Defense, and falls under the NAICS code 336413, which relates to aerospace product and parts manufacturing. The services involve verifying that each component conforms to engineering specifications and quality standards before full-scale production begins, with all findings formally recorded and submitted for government review. Performance is expected to be completed in alignment with federal defense procurement protocols, though specific location details are not provided, and the task is tied to the contract SPE4AX26F278E.
Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

N/A
View Details
NAICS: 336413
New
DIBBS
Structural Support Component ManufacturingThe contract entails the manufacture and delivery of a single structural support component designed for use on the C-130 aircraft, with strict adherence to military engineering drawings and technical specifications to ensure full operational compatibility and safety. The work is classified as a subcontract under NAICS code 336413, indicating the specialized nature of aerospace component production, and is being managed by the Defense Logistics Agency on behalf of the Department of Defense. Delivery must meet all required military standards, though specific delivery timelines, payment terms, or quality assurance protocols are not detailed in the available data. The place of performance and point of contact information are unspecified, and the solicitation does not indicate any set-aside provisions for small or disadvantaged businesses. The contract award reference is linked through the DIBBS system under the identifiers SPE4AX26DP001 and SPE4AX26F278E, with the posting date recorded as July 20, 2026.
Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

N/A
View Details
NAICS: 336413
New
DIBBS
Aerospace Parts Supplier for Knobs, Switches, and Panel ComponentsThe contract awards a subcontract for the manufacture or sourcing of aerospace components including control knobs and switches, such as the part number MSC486-AV1B2, to meet military specifications. All items must be produced and packaged in full compliance with MIL-STD-129 for military packaging standards and labeled with USSC-128 barcoding to ensure traceability and logistical readiness. The work falls under NAICS code 336413, which pertains to aerospace product and parts manufacturing, and is procured by the Defense Logistics Agency under the Department of Defense. The contract was posted on July 20, 2026, with performance expected to support defense supply chain requirements. The place of performance and specific delivery details are not defined in the provided data, but the award is linked to the DIBBS system under contract number SPE4AX26DP002 with delivery order SPE4AX26F292U.
Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

N/A
View Details
NAICS: 336413
New
DIBBS
Aerospace Parts Kit Manufacturing and AssemblyThe contract requires the manufacture and assembly of a graphite-labeled parts kit identified by NSN 1560-01-246-6384, with strict adherence to all technical specifications, configuration control standards, and end-to-end supply chain traceability. All components must be produced and assembled to meet exacting aerospace industry requirements, ensuring full compliance with defense-grade quality and documentation protocols. The work is classified as a subcontract under NAICS code 336413, indicating specialization in aerospace product and parts manufacturing, and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on July 20, 2026, with a response deadline of July 27, 2026, leaving a limited window for qualified vendors to submit proposals. The place of performance and point of contact details are not specified, but the contractual obligations demand full transparency in materials sourcing, manufacturing processes, and final inspection documentation. The project is tied to critical defense systems, necessitating rigorous control over part authenticity, material provenance, and adherence to authorized suppliers to maintain the integrity of the national supply chain.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
CROSSHEAD, AMMUNITIOThe contract pertains to the procurement of one unit of a CROSSHEAD, AMMUNITION TRAILER with NSN 1730-01-256-2370 under solicitation SPE8EF-26-T-1472, with a response deadline of July 31, 2026, and a required delivery within 20 days after award. The acquisition falls under NAICS code 336413 and is managed by the Department of Defense through the Construction & Equipment Manu & Con agency, with performance location at Holloman AFB, zip 88330-7706. The contractor must comply with DLA packaging requirements, incorporate all technical and quality specifications listed in the DLA Master List of Technical and Quality Requirements, and adhere to the requirements for Covered Defense Information. Compliance with Cybersecurity Maturity Model Certification Level 2 is mandatory, requiring a self-assessment. The contractor must also remove government identification from any non-accepted supplies and provide a complete data package including details for both the approved and alternate parts, as no sampling data is available. The point of contact is Russell Keiser, reachable via email and phone, and the solicitation is posted on the DIBBS platform.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
STRUT, AIRCRAFTThe contract is for the procurement of 430 aircraft struts, identified by NSN 1560-01-602-7772 and part number 70305-02105-045, under solicitation SPE4A6-26-Q-1170. The items are to be delivered in four shipments to multiple DLA distribution centers across the U.S., with a firm fixed price and zero variance tolerance on quantity. Delivery is required within 340 days after contract award, and all units must meet origin inspection and acceptance criteria. The contractor must comply with stringent DLA technical and quality requirements, including CMMC Level 2 cybersecurity self-assessment, ISO 9001:2015 quality management, supply chain traceability per DLAD Procurement Note C03, and adherence to MIL-STD-129 for packaging and labeling. Packaging must follow RP001 DLA packaging standards and ASTM D3951 unless materials are hazardous, in which case IP025 applies. Item Unique Identification is waived per customer request, but configuration change management and documentation retention for deviations are mandatory. Sampling follows Sikorsky’s approved alternate plan meeting ASQ H1331 or MIL-STD-1916 standards. The item is designated a critical application item, and all requirements from the DLA Master List of Technical and Quality Requirements take precedence over commercial standards.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336413
New
DIBBS
CLAMP, BANDThe contract pertains to the procurement of five units of a CLAMP, BAND, ACTUATOR MAIN LANDING GEAR with NSN 1620-01-463-5961 and part number 55083-750, supplied by EATON AEROQUIP LLC. Delivery is required within 125 days from the contract award, with shipment to be made FOB origin and inspection and acceptance occurring at the destination. The item is classified as a commercial item and is subject to stringent DLA technical and quality requirements referenced from the DLA Master List, which override any other standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, and palletization must follow specified procedures. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and critical attributes require a verification level of VII or an AQL of 0.1. All markings and labeling must adhere to military standards, and the unit of issue is EA with no quantity variance permitted. The required delivery date is August 6, 2025, with a need ship date of May 13, 2025. The contract is issued under solicitation number SPE7M4-26-T-270R, and delivery must be made to DLA Distribution Depot Hill at Hill AFB, Utah, with transportation governed by DLAD procedural notes C19 and C20.
FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
DOOR, FAIRING ASSEMBLYThe contract pertains to the procurement of 26 units of the DOOR, FAIRING ASSEMBLY, identified by part number 70215-42410-056 and NSN 1560-01-411-9797, with technical data governed by export control regulations under either ITAR or EAR. Unauthorized export, including disclosure to foreign nationals regardless of location, is strictly prohibited, and compliance with DFARS 252.225-7048 is mandatory. Access to the controlled technical data is restricted to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed required DLA training and questionnaire, and have received formal approval from the DLA controlling authority. The item is associated with drawing 70215-42410 revision AU dated 8JUL15 and the procurement package revision C dated 4JAN12, and must adhere to DLA packaging requirements. The solicitation, identified as SPE4A7-26-T-582M, is a total small business set-aside under NAICS code 336413, issued by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV, with responses due by July 28, 2026, and a delivery requirement of 532 days after order. Place of performance is Jacksonville, Florida, 32212-0103, and primary point of contact is Theresa Sharper at theresa.sharper@dla.mil.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
HEAT SHIELD, WHEEL, AIRCThe contract pertains to the procurement of 1,988 aircraft wheel heat shields identified by NSN 1630011069711 and part number 2606606, supplied by Honeywell International Inc. and Boeing Distribution Services X, Inc. The item is classified as a commercial of a type, exempting it from unique item identification requirements per DFARS 252.211-7003(c)(1)(i). Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, which supersedes all other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 and DLA packaging guidelines, with hazardous materials subject to FED-STD-313 and TQ requirement IP025, while non-hazardous items require commercial packaging compliant with ASTM D3951 unless overridden by DLA standards. Sampling protocols follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria, with attribute verification levels set at VII for critical, IV for major, and II for minor characteristics. The contract mandates CMMC Level 2 self-assessment compliance and applies Covered Defense Information requirements. Delivery is FOB origin with a strict 0% variance allowance, inspection and acceptance occur at destination, and the item must be delivered within 161 days from the contract award date with a required delivery target of December 18, 2026 and a needed ship date of January 6, 2027. All shipments must be palletized as per RP001 and addressed to the receiving warehouse in Tracy, California, with transportation details governed by DLAD procedural notes C19 and C20.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
BRAKE SHOE SETThe contract is for a Brake Shoe Set with NSN/Part Number 2530-01-046-8316, quantity of 12 units, under solicitation SPE7M2-26-Q-0648, with a response deadline of July 26, 2026, and a delivery requirement of 151 days after award. This is a total small business set-aside under FAR 19.5, issued by the Department of Defense’s Nuclear Reactor Program with performance located in Tracy, California. The supply must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. All items must meet NAVAIR aircraft launch and recovery equipment traceability requirements, with bare parts marked with the contract number, NAWC CAGE, and part number unless the associated drawing specifies otherwise. Mercury and mercury-containing compounds are prohibited from intentional addition or direct contact with the hardware, except in specified functional applications such as batteries, fluorescent lights, sensors, weapon systems, or NAVSEA-approved chemical reagents, with portable mercury-containing devices requiring shockproof construction and a secondary containment boundary as per NAVSEA 5100-003D. Class I ozone-depleting chemicals are strictly forbidden, and any substitute chemicals require prior approval unless explicitly authorized by the specification. Technical data associated with this item is subject to ITAR or EAR export controls, requiring prior authorization from the Department of State or Commerce for any disclosure to foreign persons, including foreign nationals within the U.S.; access is restricted to DLA contractors with approved JCP certification, completion of required DOD export control training, and DLA approval.
NUCLEAR REACTOR PROGRAM

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336413
New
DIBBS
COLLAR ASSEMBLY, DRIVEThe contract is for the procurement of 29 units of the Collar Assembly, Drive, identified by NSN 1615-01-622-6850 and Boeing part number 145R3438-7, classified as a Critical Safety Item for the U.S. Army. The item must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including cybersecurity compliance at CMMC Level 2, adherence to MIL-STD-129 for marking, and packaging per MIL-STD-2073-1E with specific preservation methods. Inspection and acceptance occur at origin, and the contract enforces zero-defect sampling under MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned specific verification levels and AQLs. The contractor must also perform a first article test and comply with all DLA packaging and marking requirements, including inclusion of lot and serial numbers, contractor and manufacturer CAGE codes, and part numbers on each unit. No item unique identification is required per customer request, though DFARS 252.211-7003(c)(1)(i) governs. All deviations or waivers must be submitted to the DSC Contracting Officer for approval. The delivery is due in 571 days after date of award, with firm fixed pricing and no tolerance for quantity variance. A separate line item requires one unit for First Article Testing, and another for Production Lot Testing by the Government, with inspection and acceptance at destination for the latter. The item is to be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, using approved transportation procedures. The contract is issued under solicitation SPE4A6-26-Q-1166, with the prime contractor obligated to meet SAE AS9100 quality requirements and all applicable defense regulations. The procurement is part of a larger DoD acquisition, and pricing, unit of measure, and logistics data are aligned with DoD standards, including reference to the ANSI X12 unit of issue guide. The scheduled delivery date is February 7, 2028, reflecting the long lead timeline for critical defense components.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336413
New
DIBBS
ROPE, WIREThis contract specifies the procurement of 5 units of rope and wire with NSN 4010-01-274-2973 under solicitation SPE4A6-26-T-07VZ, requiring delivery within five days to Tinker Air Force Base, Oklahoma, under FOB origin terms with zero tolerance for quantity variance. All items must comply with the DLA Master List of Technical and Quality Requirements, which governs all technical, quality, and packaging specifications and take precedence over other standards such as ASTM D3951. Packaging must follow MIL-STD-129 for marking and labeling, while palletization adheres to DLA packaging requirements, and all supplies must be shipped using traceable freight methods without parcel post. Sampling and inspection protocols require zero non-conformances in the sample lot under MIL-STD-1916 or comparable zero-based plans, with critical attributes assigned verification levels or AQLs as specified, and the manufacturer may choose between attribute or variable inspection unless the contract dictates otherwise. The item is designated as a critical application item, subject to stringent quality controls tied to the referenced technical data package and drawings, and acceptance is to occur at destination. All documentation must reflect the DLA authorized unit of issue, and the supplier must ensure compliance with government identification removal standards, bare item marking, and specific packaging data per the contract’s Unit of Issue and Quantity per Unit Pack. The required delivery date is March 5, 2026, and the contract is managed by the Department of Defense under the ASC Commodities Division with Katisha Carter as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 531020
New
DIBBS
Packaging, Marking, and Logistics (MIL-STD-129 & MIL-STD-2073-1E Compliance)The contract requires full compliance with military packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, ensuring all items are properly enclosed, protected, and labeled for defense logistics. Each package must include NSN labeling, the contractor’s CAGE code, lot traceability information, and be prepared for direct delivery to a designated U.S. government facility under FOB destination terms. The work is subcontracted as a total small business set-aside under NAICS code 531020, restricted exclusively to small businesses as defined by SBA regulations. The solicitation was posted on July 20, 2026, with proposals due by July 31, 2026, and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, though specific performance location and contact details are not provided.

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332812
New
DIBBS
Specialty Coating and Surface Treatment (QQ-C-533 Compliance)This contract requires the application of chemical conversion coatings in accordance with QQ-C-533 specifications to copper alloy washers, ensuring enhanced corrosion resistance and maintained electrical conductivity for military-grade components. The work demands strict adherence to documented processes and full traceability throughout production to meet federal defense compliance standards, with all steps thoroughly recorded to support quality assurance and audit readiness. The coating process must consistently deliver performance characteristics aligned with military requirements, and all materials, procedures, and inspections must be verifiable from start to finish. The contract is structured as a small business set-aside under the SBA program, designated for total small business participation, and falls under NAICS code 332812 for metal coating, engraving, and related services. It is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of July 31, 2026, and was posted on July 20, 2026. While no specific point of contact or place of performance is listed, bidders must be prepared to fulfill all requirements from a certified small business entity capable of delivering military-compliant surface treatments with full documentation and quality control measures in place.
Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) and Quality Certification ServicesThe contract award is for Independent Testing and Certification Services to verify that the first production unit meets all specified material, dimensional, coating, and performance requirements. This effort, known as First Article Testing, is critical to confirming that the product conforms to the technical standards before full-scale production begins. The successful bidder will be responsible for conducting the required tests, documenting results, and submitting the official DI-NDTI-80809B report, which serves as the formal certification of compliance. The work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small business concerns are eligible to compete. The solicitation falls under NAICS code 541380, which covers other scientific and technical consulting services, and is managed by the Department of Defense's ASC SUPPLIER OPER AE AND AF DIV. Responses must be submitted by July 31, 2026, with the opportunity posted on July 20, 2026, and all performance activities are tied to the defense supply chain through this procurement channel.
Testing Laboratories and Services

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
Precision Machining and Fabrication of Washer (NSN 5310-01-175-9192)A precision copper alloy washer manufactured to NSN 5310-01-175-9192 must conform strictly to engineering drawing 81755-16Z001 and meet the material and coating standards specified by ASTM B194 and QQ-C-533. The contract requires full compliance with all technical specifications including first article testing to verify dimensional accuracy, material properties, and coating adherence prior to production. Packaging and marking must align with military and federal guidelines to ensure traceability and handling integrity. The vendor is obligated to complete all manufacturing, inspection, and delivery activities within 716 days after award, with no flexibility in the timeline. The opportunity is issued as a subcontract under a Total Small Business Set-Aside as defined by FAR 19.5, exclusively available to small businesses classified under NAICS code 332722 for stamping and pressing operations. The U.S. Department of Defense, through the ASC SUPPLIER OPER AE AND AF DIV, is managing the solicitation with a response deadline of July 31, 2026, and the contract will be executed through the DLA Dibbs platform.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541512
New
DIBBS
NIST SP 800-171 Compliance and CUI Protection ServicesThe contract entails the implementation and evaluation of cybersecurity controls designed to safeguard Controlled Unclassified Information in alignment with NIST Special Publication 800-171 and Defense Federal Acquisition Regulation Supplement requirements. The work focuses on establishing, documenting, and testing technical and administrative safeguards to ensure compliance with federal standards for protecting sensitive but unclassified data handled by defense contractors. This subcontract is part of a broader effort by the Department of Defense to enforce stringent information security practices across its supply chain, ensuring that all entities handling CUI meet mandated protective measures. The solicitation is open for responses until July 27, 2026, and is classified under NAICS code 541512, indicating it relates to computer systems design services. The performing organization is the ASC SUPPLIER OPER AE AND AF DIV, operating under the Department of Defense. Although no specific location is provided for performance or point of contact, the work is expected to be carried out in environments where CUI is processed, stored, or transmitted. Compliance with NIST SP 800-171 will require a thorough gap assessment, remediation of identified weaknesses, and ongoing monitoring to maintain continuous adherence to the standard throughout the contract period.
Computer Systems Design Services

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541330
New
DIBBS
Technical Data Package (TDP) Development and Engineering SupportThe contract seeks the development of a comprehensive Technical Data Package (TDP) to support a government procurement effort, focusing on detailed technical documentation for design, materials, performance characteristics, and interchangeability requirements. This deliverable is critical to enabling a competitive contract offer and ensuring compliance with all applicable Department of Defense specifications and standards. The work involves engineering support to produce accurate, complete, and government-ready data that facilitates evaluation, manufacturing, and lifecycle management of the system or component under consideration. Submission is required by July 27, 2026, and the opportunity is structured as a subcontract under NAICS code 541330 for engineering services. The contracting activity is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, and while no set-aside designation or specific performance location is provided, the documentation must meet federal contractual and technical expectations. Interested parties must respond through the DIBBS portal by the deadline to be considered for award.
Engineering Services

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 493130
New
DIBBS
Packaging, Marking, and Shipment Preparation ServicesThe contract calls for comprehensive packaging, marking, and shipment preparation services aligned with MIL-STD-129 specifications to ensure all military shipments and storage containers are properly labeled and documented for seamless logistics reception by the Defense Logistics Agency. All work must adhere to F.O.B. Origin delivery terms, meaning the contractor is responsible for preparing and loading goods at the point of origin, with ownership and risk transferring to the government upon loading. The services are critical to maintaining compliance with DoD logistics standards, ensuring traceability, accuracy, and operational readiness during the movement of materiel. The contract is classified as a subcontract under NAICS code 493130, which corresponds to freight transportation arrangement, and is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation opened on July 20, 2026, with responses due by July 27, 2026. There is no specified set-aside status, and performance location details are not provided, implying the work may occur at any facility owned or operated by the contractor as long as delivery is F.O.B. Origin. Interested parties must submit proposals through the DIBBS portal at the provided UI link to be considered for award.
Farm Product Warehousing and Storage

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and Labeling ServicesThe contract seeks services for the development and validation of hazard warning labels for non-exempt hazardous materials, ensuring full alignment with OSHA’s Hazard Communication Standard and the Globally Harmonized System of Classification and Labelling of Chemicals. The work requires precise technical expertise in chemical hazard classification, standardized pictograms, signal words, hazard statements, and precautionary language to produce compliant, durable, and universally understandable labels. The contractor must validate that all labeling accurately reflects the chemical risks and meets regulatory expectations through documented testing, review, and quality control. This is a subcontract issued under the NAICS code 541690 for other scientific and technical consulting services by the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on July 20, 2026, with a response deadline of July 27, 2026, and is accessible via the DIBBS platform. The place of performance and point of contact details are not specified, indicating flexibility in execution but requiring proposers to clarify logistical and operational requirements in their submissions. All offerings must demonstrate proven capability in regulatory compliance and label design within the defense or industrial sector.
Other Scientific and Technical Consulting Services

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332999
New
DIBBS
Manufacture and Supply of Industrial/Defense CommoditiesThe contract entails the manufacture and supply of industrial or defense-related commodities, potentially involving hazardous materials, under strict compliance with military standards for marking, warranty, inspection, and interchangeability. All items must meet rigorous technical and safety specifications to ensure consistent performance and compatibility within military systems, with no tolerance for deviation in quality or documentation. The work is classified as a subcontract and falls under NAICS code 332999, indicating non-specified industrial machinery and equipment manufacturing, with performance obligations tied to Department of Defense requirements. The solicitation was posted on July 20, 2026, with a response deadline of July 27, 2026, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. No set-aside designation or specific place of performance has been identified, leaving flexibility for the subcontractor’s operational locations. The contract does not include a point of contact, and all inquiries must be directed through the official DIBBS portal linked in the posting. Participation requires full adherence to defense procurement regulations, including handling, labeling, and tracking protocols for any materials classified as hazardous, and bidders must be prepared to demonstrate capability in meeting military-grade quality assurance and logistical standards.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Labeling, and Palletization ServicesThe contract requires the provision of military-compliant packaging, labeling, barcoding, and palletization services for hazardous absorbent pillows, strictly adhering to DLA and MIL-STD-129 standards to ensure full operational and regulatory alignment with Department of Defense requirements. All work must meet rigorous specifications for handling, identification, and logistics readiness, with an emphasis on safety, traceability, and interoperability within military supply chains. The solicitation is designated as a Total Small Business Set-Aside under FAR 19.5, indicating that only small businesses certified by the SBA are eligible to bid, promoting equitable opportunity within the defense contracting landscape. This subcontract opportunity, classified under NAICS code 493190, is managed by the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense and is open for responses until August 3, 2026. The place of performance and official office location details are not specified, but performance is expected to align with the logistical needs of the DLA. Interested parties must submit their proposals through the DIBBS portal prior to the deadline to be considered, and compliance with all technical, administrative, and regulatory requirements is mandatory for award eligibility.
Other Warehousing and Storage

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance & Documentation ServicesThe contract titled Hazardous Materials Compliance & Documentation Services is a Small Business Set-Aside subcontract under NAICS code 541620, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. It seeks comprehensive regulatory compliance support centered on hazardous materials, requiring full adherence to OSHA, DLA, and other federal standards. Key deliverables include the preparation of Safety Data Sheets, accurate hazard labeling in compliance with global and domestic regulations, and thorough documentation review to ensure all materials are properly classified, declared, and documented throughout their lifecycle. Responses are due by August 3, 2026, and the contract is open exclusively to small businesses as defined by the SBA. Performance location details are unspecified, but the work will support defense supply chain operations requiring strict environmental, health, and safety compliance. This subcontract emphasizes precision in documentation and labeling to mitigate regulatory risk and ensure seamless integration into federal logistics and handling protocols. The solicitation is posted on DIBBS, and eligible firms must demonstrate proven experience in hazardous materials compliance, SDS development, and federal regulatory frameworks.
Environmental Consulting Services

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
NAICS: 326220
New
DIBBS
Absorbent Hazardous Material Pillow SupplyThe contract calls for the supply of absorbent pillows specifically engineered to contain hazardous materials, with all products required to fully comply with federal and military performance standards for absorption efficiency, durability, and safety. Each unit must be packaged and labeled according to strict regulatory guidelines to ensure proper identification, handling, and deployment in sensitive defense and emergency response scenarios. The solicitation is designated as a total small business set-aside under SBA guidelines, meaning only eligible small businesses can compete, and it falls under NAICS code 326220 for plastic product manufacturing. Responses are due by August 3, 2026, and the contract is structured as a subcontract under the Department of Defense, administered by the ASC Supplier Operations AE and AF Division. All work must meet the required specifications for use in military and defense applications, with performance and compliance as primary evaluation criteria.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details