Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Flooring Assembly Supply

Active

Federal

Response Deadline08/12/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks the supply of 100 square feet of slip-resistant, flame-retardant flooring assembly with part number C3C3C3, specifically intended for installation in lavatory or cabin areas aboard naval aircraft. The material must meet stringent safety and performance standards suitable for high-risk maritime aviation environments, ensuring durability under harsh conditions and compliance with fire safety regulations. This is a subcontract opportunity under NAICS code 326199, classified under the Department of Defense with the contracting office managed by Navsup Flt Logistics Ctr Puget Sound. The solicitation was posted on July 31, 2026, and responses are due by August 12, 2026, at 5:00 PM, indicating a tight turnaround for qualified suppliers to submit proposals. The place of performance and point of contact details are not specified, but the flooring will be delivered and installed in support of naval aircraft operations.

General Info

Supply 100 sq ft slip-resistant, flame-retardant flooring C3C3C3 for naval aircraft lavatories, due August 12, 2026.

Agency

Department Of Defense → Navsup Flt Logistics Ctr Puget SoundView Agency

NAICS

326199 - All Other Plastics Product ManufacturingView NAICS

Place of Performance

WA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 31

subcontract

Response DeadlineAug 12

Submission deadline

Response Deadline

08/12/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Flt Logistics Ctr Puget Sound

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Navsup Flt Logistics Ctr Puget Sound

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of 100 sq ft of slip-resistant, flame-retardant flooring assembly (part no. C3C3C3) for use in lavatory or cabin areas in naval aircraft.

Similar Contracts

Same NAICS industry code

CIPP Liner Materials SupplyThe contract requires the supply of resin-saturated felt or fiberglass liners designed for cured-in-place pipe (CIPP) installation, specifically for the rehabilitation of storm sewer systems. The liners must be custom fabricated to meet precise project specifications, ensuring compatibility with varying pipe diameters, lengths, and environmental conditions. Technical support is a critical component of the agreement, demanding close collaboration with installation teams to ensure proper handling, placement, and curing of the liners to achieve long-term structural integrity and wastewater containment. The contract is classified as a subcontract under NAICS code 326199, issued by the Mississippi Department of Finance and Administration through its MPTAP program. Bid responses are due by August 27, 2026, with the solicitation made public on July 30, 2026. The work must be performed in Mississippi, and all materials and services must comply with state infrastructure standards, with no set-aside provisions indicated. Successful vendors are expected to deliver not only high-quality, ready-to-install liners but also experienced personnel who can assist during field operations to maximize efficiency and compliance with rehabilitation protocols.

POSTED

DEADLINE

Military-Compliant Packaging of Defense ComponentsThe contract requires the packaging of gaskets and defense-related components in accordance with MIL-DTL-117 standards, using opaque, waterproof, and greaseproof bags to safeguard against contamination and environmental exposure during transit. The packaging must ensure complete protection of sensitive military hardware, maintaining integrity through all phases of shipment and handling. Compliance with this military specification is mandatory, emphasizing the need for materials and methods that meet rigorous defense sector requirements for durability and environmental resilience. This subcontract, issued by the Department of Defense under the agency name LAND SUPPLIER OPNS VEHICLE SPT, has a NAICS code of 326199 and specifies NEW CUMBERLAND, PA, with ZIP code 17070-5002 as the place of performance. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026. The procurement is not subject to a specific set-aside designation, and the contract opportunity is accessible through the DIBBS portal using the provided URL. Participation requires strict adherence to the specified packaging standards and delivery timelines to ensure readiness and reliability of defense assets.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Domestic Component & Material SupplyThe contract requires the supply of U.S.-sourced components and raw materials specifically compliant with the Berry Amendment and the Buy American Act for integration into the production of Survival Kit Containers. All materials must originate domestically to meet federal procurement integrity standards ensuring that military-grade equipment is built with strictly American-made inputs. The performance of this contract is focused at a designated facility in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the work falls under NAICS code 326199, which pertains to other plastic product manufacturing. As a subcontract, this agreement is part of a broader Department of Defense supply chain initiative managed by the ASC SUPPLIER OPER AE AND AF DIV, emphasizing full compliance with domestic sourcing mandates critical to national security logistics. Responses are due by August 7, 2026, following a posting date of July 30, 2026, providing a limited window for qualified suppliers to submit proposals. The requirement is not open to set-asides for small businesses or other categories as no set-aside type is designated, implying it is open to all eligible domestic manufacturers capable of meeting the stringent compliance criteria. Suppliers must demonstrate proven capacity to deliver materials that satisfy both the Berry Amendment’s restrictions on foreign content and the Buy American Act’s preference for domestically produced goods. The contract is accessible publicly via the DIBBS platform under solicitation number SPE4A726T601G, and interested parties are expected to verify all regulatory obligations and production capabilities prior to submission.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Electrical Insulation Sleeving (NSN: 5970011082994)The contract is for the procurement and delivery of 16,750 linear gallons of electrical insulation sleeving identified by NSN 5970011082994, which must fully comply with applicable military specifications regarding materials, labeling, packaging, and hazardous communication standards. The requirement is part of a subcontract under the Department of Defense’s Aviation Supply Chain, with performance to be conducted at Tinker Air Force Base, Oklahoma, 73145-8000. All delivered goods must meet technical and regulatory criteria to ensure operational safety and compatibility with military systems. The solicitation was posted on July 30, 2026, with a response deadline of August 7, 2026, and is categorized under NAICS code 326199, which pertains to other plastic product manufacturing. The contract does not specify a set-aside type or point of contact, and the details are accessible via the DIBBS portal. Suppliers must ensure adherence to all federal and military compliance requirements related to hazardous materials communication and packaging to qualify for award.

AVIATION SUPPLY CHAIN

POSTED

DEADLINE

Polymer Insert Molding and SupplyThe contract titled Polymer Insert Molding and Supply seeks a small business to provide traceable polymer inserts with preserved OEM markings, ensuring full compatibility with military-grade assembly and packaging standards. These inserts must meet stringent quality and traceability requirements to support critical applications within the Nuclear Reactor Program under the Department of Defense. The work is to be performed at a designated location in New Cumberland, Pennsylvania, with zip code 17070-5002, and all deliverables must adhere to defense-sector specifications for durability, precision, and identification. This is a total small business set-aside under SBA regulations, restricted exclusively to small business concerns as defined by the Small Business Administration and classified under NAICS code 326199. The solicitation was posted on July 30, 2026, with a response deadline of August 8, 2026, providing vendors a nine-day window to submit proposals. The contract is structured as a subcontract and is accessible through the DIBBS procurement portal, where interested parties can obtain further details. Compliance with traceability protocols and OEM marking integrity is non-negotiable, and bidders must demonstrate proven capability in high-reliability polymer molding for defense applications.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Supply of Corrugated Loom Tubing (NSN 5975-01-544-1766)The contract requires the supply and delivery of 3 feet of military-spec corrugated plastic loom tubing, identified by NSN 5975-01-544-1766, in continuous length and packaged in strict compliance with MIL-STD-2073-1E and MIL-STD-129 standards for documentation, labeling, and packing. Delivery must be completed within five business days after receipt of order to Marine Corps Base Hawaii at Kāneʻohe Bay, with the zip code 96863-3063 as the place of performance. The item falls under NAICS code 326199, indicating it is part of other plastic product manufacturing, and is solicited as a subcontract under the Department of Defense’s Aviation Supply Chain ESOC Buys division. The solicitation was posted on July 30, 2026, with a response deadline of August 7, 2026, and bidders must adhere to all military packaging and identification requirements to ensure compliance and timely acceptance.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Defense-Compliant Packaging and PreservationThis contract requires the provision of military-standard packaging and preservation services for tires in strict compliance with MIL-STD-2073-1E and MIL-DTL-4 specifications, ensuring long-term shelf life, environmental protection, and readiness for military use. The work must meet rigorous defense logistics requirements for durability, moisture resistance, and tamper-proof sealing to safeguard tires during storage and transport under extreme conditions. The contract is structured as a subcontract with no set-aside designation, and it is being managed by the Defense Logistics Agency under the Department of Defense, specifically through the McAlester Army Ammunition Plant facility in Oklahoma. The packaging must be engineered to maintain tire integrity for extended periods without degradation, and all materials and processes must adhere to federal military standards without exception. The solicitation was posted on July 30, 2026, with responses due by August 9, 2026, and the place of performance is designated at the McAlester Army Ammunition Plant installation supply account located at 1C Tree Road, Building 8, McAlester, Oklahoma, 74501-5000. The NAICS code 326199 indicates this effort falls under other rubber product manufacturing, reflecting the specialized nature of defense-grade tire packaging not covered by standard consumer or commercial rubber product classifications. All parties must ensure that packaging systems are fully traceable, documented, and compliant with DoD preservation protocols to guarantee operational readiness and compliance with supply chain logistics requirements under military control.

Defense Logistics Agency

POSTED

DEADLINE

Medical Product Packaging and ContainerizationThe contract entails the design and execution of commercial packaging solutions specifically engineered to safeguard blood collection tubes during transit, with critical requirements including robust shock absorption to prevent damage from impacts, effective moisture resistance to maintain sample integrity, and strict adherence to government-mandated labeling standards for compliance and traceability. The packaging must be engineered to meet the rigorous demands of medical logistics while ensuring the safety and usability of sensitive biological samples throughout the supply chain. This subcontract is issued under the NAICS code 326199 for other plastic product manufacturing, with the performance location identified as Barksdale Air Force Base, zip code 71110-2425. The opportunity was posted on July 30, 2026, with a response deadline of August 6, 2026, and is managed by the Department of Defense through the Medical Supply Chain FSH entity. While no specific set-aside designation or point of contact is provided, the contract requires precise technical execution aligned with federal regulations governing the transport of medical specimens, emphasizing reliability, regulatory compliance, and operational readiness.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Precision Molding of Molded Track Pad AssembliesThe contract calls for the manufacture of 15,000 molded rubber or polymer cushioning pad assemblies meeting strict military specifications, encompassing all stages from material sourcing and precision molding to rigorous quality control and secure packaging. This subcontract falls under NAICS code 326199 and is administered by the Department of Defense under the LAND SUPPLY CHAIN organization, with a deadline for responses set for August 13, 2026. The assemblies are critical components requiring adherence to technical and performance standards expected in defense applications, with no set-aside designation specified, indicating open competition. All work is expected to be performed in accordance with federal defense supply chain protocols, and the offering is posted on the DIBBS platform for eligible contractors to respond.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Vehicular Insulation (NSN 2540014911445)The contract obligates the contractor to manufacture, package, label, and deliver vehicular insulation conforming to military specifications and Defense Logistics Agency requirements, triggered only upon issuance of a task order. The product is identified by National Stock Number 2540014911445 and falls under NAICS code 326199, which encompasses other plastic product manufacturing. Performance is governed by U.S. Department of Defense standards, with the Strategic Acquisition Program Directorate as the overseeing agency. The invitation for submission was posted on July 30, 2026, with responses due no later than August 14, 2026, and the contract is structured as a subcontract. Place of performance and point of contact details are not specified in the provided data.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Supply of Nonmetallic Grommet (CLIN 0001)The contract calls for the manufacture or supply of two nonmetallic grommets that must fully comply with military specifications covering material composition, packaging standards, and labeling requirements. Each unit must meet rigorous defense-grade criteria to ensure performance and durability under operational conditions. Delivery of the completed items is mandated no later than December 13, 2026, with the place of performance specified as Tinker Air Force Base, Oklahoma, zip code 73145-8000. This is a subcontract under NAICS code 326199, managed by the ASC Commodities Division within the Department of Defense, and the solicitation was posted on July 30, 2026, with responses due by August 7, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Waterproof, Greaseproof Opaque Packing Material (MIL-DTL-117, Type II, Class C, Style 1)The contract seeks the manufacture and supply of medium-duty plastic bags designed to meet MIL-DTL-117, Type II, Class C, Style 1 specifications, requiring them to be waterproof, greaseproof, and opaque for use in packaging UV-sensitive defense materials. These bags must provide durable protection against environmental hazards and maintain integrity under demanding military storage and transit conditions. The materials are intended for critical defense applications where exposure to light, moisture, or oils could compromise the integrity or functionality of the contents. The solicitation is classified as a subcontract under NAICS code 326199, with a response deadline of August 10, 2026, and a posted date of July 30, 2026. Performance is required at Tracy, California, with a ZIP code of 95304-5000. The contracting office is under the Department of Defense, specifically the Land Supplier Operations Vehicle Support division, though no specific point of contact or set-aside designation is provided. Interested parties must submit proposals through the DIBBS portal using the provided link, and compliance with the military specification is mandatory without exception.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

More opportunities from Department Of Defense → Navsup Flt Logistics Ctr Puget Sound

Same awarding agency

Emergency Lighting Strip SupplyThe contract is for the supply of ten emergency lighting strips with part number S1S1S1, designed for low-voltage, long-duration operation to ensure cabin safety in marine or aerospace environments. These lighting units are critical for maintaining visibility and safety during power outages or emergency scenarios, meeting stringent operational requirements for durability and reliability under extreme conditions. The contract is classified as a subcontract under NAICS code 335129, indicating it falls within the broader category of electrical lighting equipment manufacturing. It was posted on July 31, 2026, with a response deadline of August 12, 2026, at 5:00 PM, giving potential suppliers a limited window to submit proposals. The agency responsible is the Navsup Fleet Logistics Center Puget Sound, operating under the Department of Defense, which underscores the sensitive and mission-critical nature of the equipment. Although specific location details for performance or delivery are not provided, the intent is for the lighting strips to support operations in demanding environments where standard lighting systems would be insufficient. All submissions must comply with technical and performance specifications tied to the part number and intended use without room for substitution or deviation.

Other Lighting Equipment Manufacturing

POSTED

DEADLINE

Fire Detection Sensor SupplyThe contract pertains to the supply of fire detection sensors with part number J1J1J1, required to meet stringent aerospace and marine safety standards including MIL-STD-810, ensuring robust performance under extreme environmental conditions. This subcontract is solicited by the Naval Supply Systems Command Fleet Logistics Center Puget Sound, an agency under the Department of Defense, and is specifically intended for providers capable of delivering certified components compliant with military-grade specifications. The solicitation was posted on July 31, 2026, with a deadline for responses set for August 12, 2026, at 5:00 PM, offering a limited window for qualified vendors to submit proposals. The North American Industry Classification System code 334511 indicates the focus on manufacturing other electronic components, aligning the requirement with specialized sensor production expertise. Performance is expected to support defense operations without specific location constraints, allowing flexible logistics planning while maintaining strict adherence to technical and compliance benchmarks.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Data Network Switch SupplyThe contract solicits the supply of four ruggedized data network switches, part number I9I9I9, designed to meet naval EMI/EMC standards for reliable onboard connectivity in military environments. These switches are intended for use in demanding maritime conditions where electromagnetic interference protection and durable construction are critical for mission-critical communications. The solicitation is issued as a subcontract under NAICS code 334511, which corresponds to the manufacturing of communications equipment, and is managed by the Naval Supply Systems Command Fleet Logistics Center Puget Sound under the Department of Defense. The opportunity was posted on July 31, 2026, with a mandatory response deadline of August 12, 2026, at 5:00 PM, leaving a limited window for qualified vendors to submit proposals. Performance location and point of contact details are not specified, but the equipment must be delivered to support naval operations, and compliance with strict military-grade electromagnetic compatibility requirements is non-negotiable.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Electrical Harness SupplyThe contract pertains to the supply of a main electrical harness with part number H8H8H8, specifically designed for integration into lavatory units and requiring full EMI/RFI shielding to ensure electromagnetic compatibility in sensitive environments. The harness must meet all applicable MIL-SPEC standards to guarantee durability, performance, and reliability under demanding operational conditions typical of military and defense applications. The work is being procured as a subcontract under the NAICS code 335931, which classifies it within the electrical component and accessory manufacturing sector. The solicitation was posted on July 31, 2026, with a firm response deadline of August 12, 2026, at 5:00 PM. The contracting entity is the Naval Supply Systems Command Fleet Logistics Center Puget Sound, acting on behalf of the Department of Defense, indicating this is a defense-related requirement. While specific performance locations and point of contact details are not provided, the nature of the procurement and the agency involved confirm the project’s alignment with U.S. military equipment integration standards and timelines. Bidders must ensure compliance with all technical, quality, and delivery requirements to be considered for award.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

Water Pump Assembly SupplyThe contract is for the supply of a water pump assembly with part number G7G7G7 specifically designed for integration into aircraft lavatory systems, with stringent requirements for marine or aerospace durability to ensure reliable operation under extreme environmental conditions. The item must meet high-performance standards suitable for aviation use, emphasizing longevity, corrosion resistance, and operational stability in high-vibration, high-humidity settings typical of aircraft environments. This is a subcontract under the NAICS code 333911, indicating manufacturing of other commercial and service industry machinery, and is administered by the Naval Supply Systems Command Fleet Logistics Center Puget Sound under the U.S. Department of Defense. The solicitation was posted on July 31, 2026, with a firm deadline for responses set for August 12, 2026, at 5:00 p.m. The contract does not specify a set-aside classification or reserved status for small businesses, and no point of contact details are provided within the data. Performance location and office address information are incomplete, but the end-use context and governing agency confirm the work is directly tied to military aviation support systems. Interested parties must submit compliant proposals by the deadline to qualify for award, with the expectation that the delivered assemblies will undergo rigorous quality verification before integration into naval aircraft systems.

Pump and Pumping Equipment Manufacturing

POSTED

DEADLINE

Waste Holding Tank SupplyThe contract calls for the supply of a corrosion-resistant, sealed waste holding tank designated by part number F6F6F6, specifically designed for integration into marine sanitation systems. The material and construction must meet strict durability standards to withstand prolonged exposure to saltwater, humidity, and harsh marine environments while maintaining complete seal integrity to prevent leaks or contamination. The item is classified under NAICS code 332439, indicating it falls within the category of other fabricated metal product manufacturing, and is beingprocured as a subcontract under the Department of Defense through the Naval Supply Systems Command Fleet Logistics Center Puget Sound. The solicitation was posted on July 31, 2026, with responses due by August 12, 2026, at 5:00 PM, leaving a limited window for qualified suppliers to submit proposals. Performance location details are not specified, but the nature of the component implies delivery to naval vessels or shore-based marine sanitation facilities operated by the U.S. Navy. All submissions must adhere to technical specifications ensuring compatibility, safety, and long-term operational reliability under demanding maritime conditions.

Other Metal Container Manufacturing

POSTED

DEADLINE

Seating Module SupplyThe contract seeks the supply of a passenger seating module designed for integration into naval aircraft or vessel interiors, classified as a commercial or custom item under NAICS code 336320. The work is scoped as a subcontract under the Department of Defense, specifically managed by the Naval Supply Systems Command Fleet Logistics Center Puget Sound, with a response deadline set for August 12, 2026, at 5:00 p.m. Eastern Time. The module must meet stringent military standards for durability, safety, and compatibility with existing naval platforms, ensuring seamless installation and long-term operational reliability in demanding environments. All deliverables are expected to align with defense-specific requirements for space utilization, weight constraints, and environmental resilience, including resistance to saltwater, extreme temperatures, and high vibration. While no set-aside designation or point of contact is specified, the solicitation is open to qualified vendors capable of fulfilling defense logistics needs with either commercial-off-the-shelf solutions or customized designs. The seating module must support passenger comfort and crew ergonomics without compromising structural integrity or mission-critical space allocations aboard naval assets. Performance is anticipated to occur across naval facilities managed by the Department of Defense, with the exact location undetermined. Interested parties must submit proposals prior to the deadline through the official SAM.gov portal, ensuring full compliance with technical specifications, quality assurance protocols, and delivery timelines required for military integration.

Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

DEADLINE

Cabinet Assembly FabricationThe contract titled Cabinet Assembly Fabrication pertains to the manufacture and delivery of a custom cabinet assembly identified by part number 333333, to be produced in full compliance with specification 444444. The work requires precise fabrication with specific attention to preservation methods and traceability marking to ensure quality control and lineage throughout the supply chain. This is a subcontract awarded under the NAICS code 337127, indicating classification within the manufacturing of wood kitchen and bathroom cabinets. The opportunity was posted on July 31, 2026, with a firm response deadline of August 12, 2026, at 5:00 PM. Performance will be conducted under the oversight of the Navsup Flt Logistics Ctr Puget Sound, a unit within the Department of Defense, though no specific place of performance or point of contact details are provided. The contract is not designated under any specific set-aside category and is accessible through the SAM.gov platform for interested subcontractors.

Institutional Furniture Manufacturing

POSTED

DEADLINE

Lavatory Unit Manufacturing and AssemblyThe contract requires the full fabrication, assembly, and delivery of a lavatory unit as specified in technical drawing 222222 and part number 111111, encompassing all necessary production steps from raw material processing to final assembly. The scope includes proper packaging and preservation measures to ensure the unit remains in optimal condition during transit and storage, along with strict adherence to UUI/IUID standards for full traceability and compliance with federal asset tracking requirements. This subcontract is issued under NAICS code 332999, indicating it falls under other miscellaneous fabrication, and is managed by the Naval Supply Systems Command Fleet Logistics Center Puget Sound under the Department of Defense. The opportunity was posted on July 31, 2026, with a firm response deadline of August 12, 2026, at 5:00 PM, and performance will be carried out at an unspecified location within the U.S. All submitted units must meet exact technical specifications and documentation requirements to qualify for acceptance.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Supply of Oil Burner Sprayer Plates (Drawing D-42042)The contract involves the supply and delivery of ten precision-machined Sprayer Plates, Oil BU, designated as Item No. 2 of Drawing D-42042, specifically engineered to meet the technical requirements for defense oil burner systems. These components are critical to the operational integrity of naval oil burner equipment and must be manufactured to exacting standards to ensure compatibility, durability, and performance under demanding conditions. The work is classified under NAICS code 332721, indicating it pertains to machine shops and related manufacturing services. This is a Small Business Set Aside contract, meaning only eligible small businesses may compete for award, and it is issued as a subcontract under the Department of Defense through Navsup Fleet Logistics Center Puget Sound. The solicitation was posted on July 31, 2026, with a firm response deadline of August 10, 2026, at 9:00 PM Eastern Time. The place of performance and specific delivery location are not detailed, but the requirement is tied to defense systems, implying fulfillment will support military readiness. Access to the full solicitation details is available through the SAM.gov portal.

Precision Turned Product Manufacturing

POSTED

DEADLINE

Supply of Atomizer Assemblies (Todd Combustion BRONW 2.500IN)The contract entails the supply and delivery of three units of Atomizer Assemblies, specifically model BRONW 2.500IN Jacket Tube with NSN 4530-01-119-9501, manufactured to meet original equipment manufacturer specifications for integration into defense systems. The requirement is structured as a subcontract under a Small Business Set Aside - Total designation, exclusively reserved for small businesses, with the NAICS code 333414 indicating classification within the Industrial Machinery and Equipment Manufacturing sector. The solicitation was posted on July 31, 2026, with a response deadline set for August 10, 2026, at 9:00 PM Eastern Time, leaving potential bidders a limited window to submit proposals. The procuring activity is the Naval Supply Systems Command Fleet Logistics Center Puget Sound, operating under the Department of Defense, and the performance location is not explicitly defined but is expected to align with defense logistics requirements. All delivered units must conform strictly to OEM standards to ensure compatibility and reliability within critical military applications.

Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

DEADLINE

Solicitation # N0040626Q0446

The U.S. Navy’s Fleet Logistics Center Puget Sound is soliciting quotations for Lavatory Units under solicitation number N0040626Q0446, with a response deadline of August 12, 2026, and an anticipated award date in August 2026. All responsible sources are invited to submit proposals, and evaluations will be conducted based on technical factors including delivery date, price, and past performance, with no single factor prioritized over the others. The Government will determine offeror responsibility by assessing price reasonableness and past performance in accordance with RFO 12.203. Technical drawings, references, and technical guidance information are not included in the solicitation due to distribution restrictions; eligible quoters registered with the Joint Certification Program must request these materials directly using their CAGE code and DD Form 2345 from their data custodian. Interested parties must register for JCP through the DLA website to gain access. All correspondence must include the solicitation number in the subject line. The point of contact is Contracting Officer Sara Robinson at sara.e.robinson19.civ@us.navy.mil, and the procurement falls under NAICS code 332999 with no set-aside designation.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE