Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

FLOSS, WAXED, DENTAL

Active
SPE2DH-26-T-5773Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of dental floss, waxed, nylon, 200 yards per roll, for military use under NSN 6520-01-500-1520, with a unit of issue as each and a requested quantity of 25 units. The product must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition scale. Packaging must adhere to DLA packaging standards, and any non-accepted supplies must have government identification removed prior to return. The solicitation, issued under SPE2DH-26-T-5773, requires bidders to clearly state the source and part number being offered and targets delivery within 84 days ADO to an APO address with ZIP 09227-0000. The purchasing agency is the Department of Defense through the Medical Supply Chain FSH, with Tina Vu as the primary point of contact, and the solicitation closes on August 11, 2026, under NAICS code 325620 for manufacturing of dental appliances and equipment.

General Info

Procure 25 units of waxed nylon dental floss, 200 yards per roll, for DoD, delivery to APO 09227 by 84 days ADO.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

325620 - Toilet Preparation ManufacturingView NAICS

Place of Performance

ATTN CL VIII MED REQ PROCES ACT, APO, AE, 09227-0000, US

Set-Aside

NONE

Documents

(1)

SPE2DH-26-T-5773.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUS
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
FLOSS,WAXED,DENTAL
FLOSS, WAXED, DENTAL
FLOSS DENTAL WAXED 200 YD DENTAL FLOSS; WAXED;
NYLON; ROLL; 200 YARDS; THIS IS FOR MILITARY USE
END ITEM NSN 6520-01-500-1520.
UNIT OF ISSUE: EACH
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
BIDDER: PLEASE SPECIFY SOURCE AND PART
NUMBER BEING SUPPLIED.
ADEQUATE DATA FOR THE NSN/Part Number: 6520-01-520-7333 Quantity: 25 EA Purchase Request: 7017744599QTY: 25 Delivery: 84 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 325620
New
DIBBS
Medical Kit Assembly and Kitting ServicesThe contract seeks a subcontractor to perform the final assembly, sterilization, and packaging of all components into a single sealed obstetric delivery kit that meets rigorous military and medical standards. The work must ensure full compliance with required specifications for use in field and clinical environments, with emphasis on sterility, integrity, and readiness under demanding conditions. All processes, from component integration to final sealing, must be conducted under controlled conditions to maintain quality and safety protocols aligned with defense and healthcare regulations. The contract is issued under the NAICS code 325620 for Pharmaceutical and Medicinal Chemical Manufacturing by the Department of Defense through the Medical Supply Chain MD Surg FSF office. Performance is required to take place in San Antonio, Texas, with a response deadline of August 10, 2026. The work is classified as a subcontract opportunity, and while no specific set-aside status is indicated, the location and nature of the requirement suggest it is intended for qualified suppliers capable of supporting military medical logistics with precision and reliability.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 325620
New
DIBBS
Disposable Medical Kit Component ManufacturingThe contract seeks manufacturers to produce disposable medical components for an obstetric delivery kit, including scalpels, umbilical cord clamps, gauze sponges, towels, drapes, and gloves, all intended for use in clinical birthing environments. The work is classified under NAICS code 325620, indicating specialization in medical and surgical instrument manufacturing, and is structured as a subcontract under the Department of Defense’s Medical Supply Chain division. Performance is required to be completed at a designated location in San Antonio, Texas, with the zip code 78226, though no specific address or point of contact is provided. The solicitation was posted on August 3, 2026, with responses due by August 10, 2026, indicating a tight turnaround for proposals. The contract does not specify any set-aside provisions for small businesses or other categories, and the offering is accessible through the DIBBS procurement portal under reference number SPE2DS26T301H.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 325620
New
DIBBS
Supply of Penrose Surgical DrainsThe contract requires the supply of 1/2 inch by 12 inch Penrose surgical drains with packaging and labeling fully compliant with MIL-STD-129 standards, ensuring uniformity and traceability throughout military logistics. All deliveries must be directed to Camp Lejeune with the specified zip code 28542-0128, and the work falls under NAICS code 325620, categorizing it within medical and surgical device manufacturing. The solicitation is structured as a subcontract under the Department of Defense’s Medical Supply Chain, managed by the MEDICAL SUPPLY CHAIN MD SURG FSF, with a response deadline set for August 10, 2026, and the opportunity posted on August 3, 2026. Compliance with military packaging regulations is mandatory, and contractors must ensure timely, accurate fulfillment to support operational medical readiness at the designated performance location.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 325620
New
DIBBS
Supply of Disposable Pediatric Pharyngeal Airway Devices (Berman Type, 60mm)
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 325620
New
DIBBS
Supply of OP-SITE Permeable Wound DressingsThe contract seeks the supply of two boxes of OP-SITE Permeable wound dressings, each containing 50 units measuring 10cm x 14cm, for use by the Department of Defense. These are commercial off-the-shelf sterile medical devices intended for battlefield or clinical wound care applications, and the delivery must meet military-grade standards for sterility, packaging, and readiness. The order is placed under a subcontract and is specifically designated for performance at Camp Lejeune, North Carolina, with the zip code 28542-0128 as the point of delivery. The solicitation was posted on August 3, 2026, and responses are due by August 10, 2026, with the NAICS code 325620 indicating classification under Medical Equipment and Supplies Manufacturing. No set-aside provisions are specified, and the agency responsible is the Medical Supply Chain MD Surg FSF within the Department of Defense, which manages procurement for frontline medical logistics.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 325620
New
DIBBS
Supply of Sealing Compound (NSN 8030007535003)The contract entails the procurement, packaging, and delivery of a commercial off-the-shelf sealing compound identified by NSN 8030007535003, meeting stringent military specifications for use by the Defense Logistics Agency. The work falls under NAICS code 325620, indicating classification within the chemical manufacturing sector, and is structured as a subcontract under the Department of Defense. Delivery must align with DLA’s operational requirements, ensuring the sealing compound is properly packaged and transported to meet readiness and logistical standards across military channels. The contract was posted on August 3, 2026, and is associated with the award number SPE8ES24D0005 and delivery order SPE8ES26F73PJ, reflecting established procurement tracking identifiers used by DLA for accountability and fulfillment.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 325620
New
DIBBS
Hypoallergenic Medical-Grade Ear Plug Supply
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 325620
New
DIBBS
Disposable Supraglottic Airway Device ManufacturingThe contract seeks the manufacture of disposable, single-patient use supraglottic airway devices equipped with an integrated gastric access channel, designed to support ventilation, oxygenation, and anesthesia delivery in clinical settings. These devices must meet stringent medical performance and safety standards for use in emergency and surgical applications, ensuring reliable airway management while minimizing contamination risks through single-use design. The work is intended for a subcontract arrangement under the Department of Defense’s Medical Supply Chain, with production and delivery anticipated to support military medical operations. The solicitation, issued under NAICS code 325620 for pharmaceutical and medical manufacturing, requires responses by August 10, 2026, and performance must be executed at Fort Hood, Texas, with a zip code of 76544. The contract is part of a broader effort to secure reliable, high-quality medical equipment for defense healthcare systems, emphasizing supply chain resilience and operational readiness. All vendors must comply with relevant federal medical device regulations and be prepared to meet volume, quality control, and logistics requirements aligned with DoD procurement protocols.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 325620
New
Federal
Skin Care and Hygiene SuppliesThe contract is for the supply of fragrance-free emollient, antiperspirant, and antibacterial soap specifically intended for gym hygiene use, targeting requirements within a Department of Defense facility located in Madison, Wisconsin, with a ZIP code of 53704. The solicitation is classified as a subcontract under a Small Business Set Aside, total, meaning only eligible small businesses can bid, and it falls under the NAICS code 325620, indicating it is related to the manufacturing of soap and cleaning compounds. The opportunity was posted on August 3, 2026, with a firm deadline for responses set for August 24, 2026, at 9:30 p.m. Eastern Time. All products must be free of fragrance to meet hygiene and health standards in shared gym environments, ensuring safety and comfort for users with sensitivities. The contracting activity is listed as W7N8 Uspfo Activity Wiang 115, indicating the procurement is managed by a specialized defense unit, though no point of contact or specific office address has been provided publicly.
W7N8 Uspfo Activity Wiang 115

POSTED

1 day ago

DEADLINE

in 20 days
View Details
NAICS: 325620
New
Federal
Blood Collection Tube and Specimen SupplyThe contract is for the provision of sterile blood collection tubes and specimen handling supplies specifically designed to be compatible with QuantiFERON TB testing procedures. It is issued as a subcontract under the Department of Veterans Affairs through the 257-NETWORK Contract Office 17, with the North American Industry Classification System code 325620 indicating the industry as pharmaceutical and medicine manufacturing. Performance of the work is required in Dallas, Texas, with a zip code of 75216. The solicitation was posted on August 3, 2026, and responses must be submitted no later than August 10, 2026, at 3:00 PM. All supplies must meet stringent compatibility standards to ensure accurate and reliable diagnostic results for tuberculosis testing within VA healthcare operations. No set-aside provisions or specific organizational eligibility criteria are specified, and the point of contact details are not provided in the published data.
257-NETWORK Contract Office 17 (36C257)

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 325620
New
DIBBS
Commercial Off-the-Shelf (COTS) Baby Shampoo SupplyThe contract seeks the supply of commercially available baby shampoo in 7 oz bottles, each case containing 24 bottles, and requires full compliance with federal medical item marking and packaging standards to ensure proper handling, tracking, and use within healthcare settings. The product must meet established commercial off-the-shelf criteria with no customization, adhering to established quality and safety benchmarks for pediatric use. The solicitation falls under NAICS code 325620, indicating classification within the soap and cleaning compound manufacturing sector, and is structured as a subcontract under the Department of Defense's Medical Supply Chain. Performance is required at the designated location in Raleigh, North Carolina, with a zip code of 27607-0000, and all deliveries must align with federal medical logistics protocols. The opportunity was posted on August 2, 2026, with responses due by August 10, 2026, and is accessible via the DIBBS platform under solicitation number SPE2DS26T297G. Only vendors capable of meeting federal medical packaging and labeling requirements will be considered, and the supply must support the consistent procurement needs of military healthcare facilities without interruption or deviation from established specifications.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 325620
New
DIBBS
Manufacture and Supply of Sterile Nasopharyngeal Airway DevicesThe contract requires the manufacture, sterilization, packaging, and delivery of flexible, latex-free, sterile nasopharyngeal airways with an outer diameter of 127mm and a size of 30FR, all conforming to DLA specifications. The products must meet stringent quality and safety standards to ensure they are suitable for medical use in operational and clinical settings. The work is to be performed under a subcontract arrangement governed by Department of Defense procurement protocols, with the place of performance designated as APO 96264-2022, indicating potential logistics and distribution focus for military use. All units must be delivered in a fully sterilized and properly packaged condition to preserve sterility until point of use. The solicitation, issued under NAICS code 325620 for Medical Equipment and Supplies Manufacturing, was posted on August 2, 2026, with a response deadline of August 10, 2026. The contracting activity is managed by the Medical Supply Chain MD Surg FSF, underscoring its relevance to military medical readiness. While no set-aside type or point of contact is specified, the contract is open for competitive submission through the DIBBS platform, and qualified manufacturers must demonstrate their ability to produce, sterilize, and deliver the devices in compliance with all technical and regulatory requirements. Deliveries will be timed to support DoD medical supply needs, requiring precise adherence to volume, timeline, and conditioning specifications.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

2 days ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 333248
New
DIBBS
SCOOP, LABORATORY
Solicitation # SPE2DH-26-T-5776
The contract specifies the procurement of sterile, disposable, individually sealed laboratory scoops manufactured from polystyrene plastic, intended for retrieving samples from larger sources. The product is white in color and supplied in boxes of ten units each, with a total order quantity of three boxes. The items are classified under NSN 6640-01-722-5866 and must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the type of acquisition. Packaging must adhere to DLA packaging standards, and any non-accepted supplies must have government identification removed prior to return. Delivery is required within twenty days after issuance, and performance will occur at APO 96278-2060. The solicitation, issued under SPE2DH-26-T-5776, was posted on August 4, 2026, with responses due by August 11, 2026. The contracting authority is the Department of Defense through the Medical Supply Chain FSH, with Tina Vu listed as the primary point of contact.
All Other Industrial Machinery Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
PANEL, MODULAR, HANGING
Solicitation # SPE2DH-26-T-5768
The contract is for a single unit of a modular hanging trauma panel designated by NSN 6530-01-515-7651, intended for rapid deployment in combat trauma care during CASEVAC operations. Constructed of black Cordura nylon, the panel is MOLLE compatible and designed to integrate seamlessly with military aircraft, ground vehicles, and fixed or temporary facilities. It features a comprehensive internal layout including four full-width storage pockets, one half-panel bellos pocket, and a total of ten modular pockets—six small, two medium, one long, and one flat—each labeled with removable low-light visibility markings to ensure quick identification under low-visibility conditions. The panel itself is marked internally and externally with low-light readable "TRAUMA" identifiers and supports immediate access to essential medical supplies, enabling effective "tail gate" medical response anywhere on the battlefield. The procurement falls under DLA packaging requirements and incorporates technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date or award date depending on acquisition size. The solicitation number is SPE2DH-26-T-5768, issued on August 4, 2026, with bids due by August 11, 2026. Delivery is required within 20 days of award to Fort Bliss, Texas, 79918-2527. The contract is managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu listed as the primary point of contact. Bidders must clearly identify the source and part number of the supplied item, and the purchase request number is 7017716143, with the unit of issue being each.
Surgical Appliance and Supplies Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 453998
New
DIBBS
STUDY CARD
Solicitation # SPE2DH-26-T-5772
The study card is a paper-based item measuring 5 inches by 4 inches, intended for use with the Explosive Ordnance Disposal Tool Kit identified by NSN 1385-01-565-1626. It is supplied as a single unit and is specifically tied to the part number 6910-01-612-6510 with a required quantity of one. The item is subject to technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which must be accessed online, and compliance is governed by the revision of the master document in effect at the time of solicitation or award depending on the acquisition size. The contract includes a requirement for the removal of government identification from non-accepted supplies. This solicitation, identified by SPE2DH-26-T-5772, was posted on August 4, 2026, with a response deadline of August 11, 2026. The purchase request number is 7017726970, and delivery is expected within 20 days after order placement. The contract is managed by the Medical Supply Chain FSH under the Department of Defense, with performance required at Camp Lejeune, North Carolina, 28542. All inquiries should be directed to Tina Vu at the provided contact information. The NAICS code for this procurement is 453998, and the full solicitation details are accessible through the DIBBS portal.
All Other Miscellaneous Store Retailers (except Tobacco Stores)

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334513
New
DIBBS
COMPARATOR, COLOR
Solicitation # SPE2DH-26-T-5767
The comparator is a color-matching device designed for use with COLILERT QUANTI-TRAY systems to distinguish between borderline positive and negative results through visual comparison of yellow fluorescence thresholds. It is a 51-well tray filled with a proprietary borderline yellow and fluorescing medium to ensure accurate interpretation of test outcomes. The item is identified by NSN 6630-01-506-2252 and is being procured under solicitation SPE2DH-26-T-5767 for a single unit, with delivery required within 20 days of award. The product is subject to strict shelf-life requirements, mandating a non-extendable 12-month lifespan from the date of manufacture, with no more than one month elapsed between manufacturing and government delivery. Labeling must adhere to the latest version of Medical Marking Standard No. 1, including clear indications of manufacture date, expiration date, and contract or lot number, replacing all prior references to MIL-STD-129. Packaging must comply with commercial standards, protect contents from damage, and ensure safe, cost-effective transport to Dover AFB, with all markings and packaging conforming to DLA’s specified medical packaging requirements. The contract incorporates technical and quality requirements from the DLA Master List, includes provisions for handling covered defense information, and follows DLA packaging and removal guidelines for non-accepted supplies.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
MOUTH BARRIER, MANIKIN,
Solicitation # SPE2DH-26-T-5774
The contract solicits a single package of fifty disposable adult-sized mouth barrier and lung bag combinations designed exclusively for CPR training purposes, compatible with the Prestan adult CPR training manikin. The item is identified by NSN 6910-01-708-2080 and must comply with DLA packaging and technical quality requirements as outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The unit of issue is a package containing fifty units, with a total order quantity of five packages requested to be delivered within five days of award. The procurement is governed under the federal solicitation SPE2DH-26-T-5774, issued by the Department of Defense’s Medical Supply Chain FSH, with a response deadline of August 11, 2026, and a posted date of August 4, 2026. Delivery must be made to an FPO address with ZIP 96693, and all supplies must meet the requirement for removal of government identification if not accepted. Primary point of contact is Tina Vu, reachable via email and phone provided.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333248
New
DIBBS
LITMUS PAPER
Solicitation # SPE2DH-26-T-5777
LITMUS PAPER, ACS, 30’S, identified by NSN 6640-01-485-6075, is procured under solicitation SPE2DH-26-T-5777 with a requirement for one package containing thirty individual units, each individually sealed in foil packets with a printed color chart for pH indication. All packaging must comply with commercial standards as specified in the procurement document, ensuring each unit is protected from damage and that exterior shipping containers are suitable for safe transport at the lowest cost to the designated delivery point in APO, 96278-2060. The product must adhere to Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and each label must include the NSN, manufacturer and CAGE code, date of manufacture, expiration or retest date, and contract or lot number. The shelf life is strictly limited to eighteen months, with no more than three months having passed from the date of manufacture to the date of government delivery. Bidders must clearly state the source and part number being offered. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Additionally, the contract incorporates provisions for the removal of government identification from non-accepted supplies and confirms that covered defense information may apply. The solicitation closes on August 11, 2026, and delivery is required within twenty days of award.
All Other Industrial Machinery Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335910
New
DIBBS
BATTERY, DEFIBRILLATOR
Solicitation # SPE2DH-26-T-5775
A 12VDC lithium battery with approximately 9.2 grams of lithium content is specified for use with Cardiac Science PowerHEART G5 AEDs, sold in units of each. The battery must be stored between 20°C and 30°C to maintain integrity and performance. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition scale. Packaging must comply with DLA procurement standards, and non-accepted supplies must have government identification removed. Covered defense information provisions may apply. The item is identified by NSN 6135-01-652-9622 with a quantity of four units required under purchase request 7017720173, and delivery is due within 20 days after award. The solicitation number is SPE2DH-26-T-5775, posted on August 4, 2026, with responses due by August 11, 2026. The contract is managed by the Department of Defense’s Medical Supply Chain FSH through the DLA, with performance located in San Diego, California, and primary point of contact being Tina Vu at tina.vu@dla.mil.
Battery Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
DRAPE, SURGICAL
Solicitation # SPE2DH-26-T-5770
The contract is for the procurement of 4 packages of surgical drapes, each containing 40 disposable, sterile, antimicrobial adhesive drapes measuring 35 inches by 23 inches and impregnated with IOBAN. The item is identified by NSN 6530-01-181-8247 and must be delivered within 20 days of award. All units must be sealed in individual containers that protect against damage and packed in commercial shipping containers suitable for safe transport at the lowest cost to the delivery point at Fort Hood, Texas. Packaging and marking must comply with Medical Marking Standard No. 1, which replaces all references to MIL-STD-129, and copies of this standard are available through DLA Troop Support. The procurement falls under the NAICS code 423450 and is managed by the Department of Defense’s Medical Supply Chain FSH. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Government identification must be removed from non-accepted supplies, and all data provided must be adequate to support compliance with federal procurement standards. The solicitation number is SPE2DH-26-T-5770, with a response deadline of August 11, 2026, and primary point of contact is Tina Vu.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
DRAPE, SURGICAL
Solicitation # SPE2DH-26-T-5764
The contract specifies the procurement of surgical drapes, specifically an adhesive U-drape measuring 47 inches by 51 inches with a U-slot opening of 20 by 6.375 inches, designed to be impervious for sterile surgical use. Each unit is packaged in a sealed container to prevent damage or contamination, with 40 units per package, and a total of two packages are ordered. The product must maintain a 36-month shelf life from the date of manufacture, with no more than six months elapsed between manufacturing and delivery to the government. Packaging and marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and all units must be shipped in commercial exterior containers suitable for safe transit by common carriers at the lowest rate to the designated delivery point at Fort Hood, Texas. The material must be marked per DLA’s medical marking guidelines, and all packaging requirements align with DLA’s RP001 standards. The NSN is 6530-01-150-3925, with a solicitation number SPE2DH-26-T-5764 issued on August 4, 2026, and responses due by August 11, 2026. Delivery is required within 20 days of award. The contracting authority is the Department of Defense under the Medical Supply Chain FSH, and the primary point of contact is Tina Vu.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
TEST PAPER, CHLORINE DE
Solicitation # SPE2DH-26-T-5766
The contract specifies the procurement of chlorine determination test paper, designed for accurate chlorine level measurement with a color chart ranging from 10 to 200 ppm, supplied in two 15-foot rolls of 5/32 inch width, sufficient for 200 tests. Each package contains ten units, with a total order of four packages. The product is governed by the procurement document SPE2DH-26-T-5766 and must comply with the DLA Master List of Technical and Quality Requirements, including packaging standards under RP001, removal of government identification from non-accepted supplies under RQ011, and medical marking requirements per Medical Marking Standard No. 1, which supersedes MIL-STD-129. All units must be sealed in commercial-quality containers and packed in exterior shipping containers suitable for safe, cost-effective transport to the delivery point at Arcadia, ZIP 34266-8836. The item has a non-extendable shelf life of 36 months, with no more than five months allowed to have passed from the date of manufacture to the date of government delivery. Labeling must include the date of manufacture, expiration or retest date, and the contract number or lot number, following the latest revision of MMS1C. The NSN is 6630-01-012-4093, and delivery is required within 20 days of award. The solicitation, issued on August 4, 2026, with a response deadline of August 11, 2026, is managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu as the primary point of contact. Covered defense information provisions and applicable DLA packaging requirements must be fully adhered to, ensuring compliance with federal procurement standards.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 314910
New
DIBBS
PANEL, MODULAR, MEDIC
Solicitation # SPE2DH-26-T-5769
The contract calls for two modular medical panels designed for primary care operations in field environments, each constructed from black Cordura nylon with MOLLE compatibility to allow seamless integration with existing military equipment systems. These panels provide organized, immediate-access storage for medical supplies and equipment used to manage sick call patients in operational settings, ensuring efficient triage and treatment capabilities in both fixed and temporary facilities. The item is identified by NSN 6530-01-518-0118, with a requirement for delivery within 20 days of award, and must fully comply with technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, including packaging and government identification removal standards. Bidders must clearly specify the source and part number being submitted, as this solicitation is issued under contract number SPE2DH-26-T-5769 by the Department of Defense’s Medical Supply Chain FSH, with performance located at Fort Bliss, Texas. The solicitation was posted on August 4, 2026, and responses are due by August 11, 2026, under NAICS code 314910 for other textile product mills. Tina Vu of DLA serves as the primary point of contact for inquiries, and all submissions must adhere to DLA procurement and packaging directives applicable to the solicitation issue date, with no set-aside provisions specified.
Textile Bag and Canvas Mills

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
PAD, HEAT TREATMENT
Solicitation # SPE2DH-26-T-5778
The product is a single-use, disposable heat therapy pad designed for instant and consistent pain relief through simple activation by squeezing and kneading. Made with food-grade sodium acetate and non-toxic materials free of DEHP and natural rubber latex, it is safe for direct skin application and meets strict safety standards. Measuring 6 by 9 inches, each case contains 16 pads and requires storage at room temperature. The item is identified by NSN 6530-01-724-0439 with a procurement quantity of four cases under Purchase Request 7017729834, with delivery expected within 20 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with packaging and supply handling subject to DLA regulations including removal of government identification from non-accepted supplies. The solicitation, issued under SPE2DH-26-T-5778 on August 4, 2026, with a response deadline of August 11, 2026, is managed by the Department of Defense's Medical Supply Chain FSH, with performance at Hurlburt Field, Florida, and primary point of contact Tina Vu at DLA.
Surgical Appliance and Supplies Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details