This Government Contract opportunity from Department Of Defense was posted on October 12, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Fluid Pressure Regulating Priority Valve Supplier

Closed

Federal

Submission Closed10/23/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332912

New

DIBBS

Supply of Fluid Pressure Regulating ValvesThis subcontract involves the supply of two fluid pressure regulating valves for prime contractors supporting the Defense Logistics Agency. The specific requirement is for NSN 4820002856125, corresponding to Watts Regulator Co part number R-119-02C. All items must be delivered FOB Origin and must adhere to strict packaging and marking standards, specifically ASTM D3951 for packaging and MIL-STD-129 for shipment marking. The procurement falls under NAICS code 332912 and is managed through the Department of Defense. Interested parties must note the response deadline of November 9, 2026, to ensure compliance with the solicitation timeline established by the agency.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Fuel and Oil Servicing Nozzles (NSN 4930-01-574-2434)This subcontract involves the manufacture or sourcing of 12 fuel and oil servicing nozzles, specifically NSN 4930-01-574-2434, for prime contractors delivering to DLA Troop Support. The contractor must ensure all units are produced according to the DLA Master List of Technical and Quality Requirements and adhere to strict marking, labeling, and palletization standards per MIL-STD-129 and RP001. All materials provided under this agreement must comply with the Buy American Act and the Berry Amendment. The performance of this contract is centered in Cherry Point, and the procurement falls under NAICS code 332912 for the Department of Defense.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE7MC-27-T-1315

Solicitation SPE7MC-27-T-1315 is a small business set-aside request for quotations issued by the Defense Logistics Agency Weapons Support Maritime Hardware/Electrical for the procurement of one fluid valve stem, identified by NSN 4820-01-348-4525. The required delivery date is October 22, 2026, with shipping terms set as FOB Destination to the Nuclear Power Training Unit in Goose Creek, South Carolina. Quotations must be submitted by November 9, 2026. The manufacturer's inspection system must comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003, and destination inspection is required. The contract incorporates stringent technical and security requirements, including DLA packaging requirements (RP001), MIL-STD-129 marking, and MIL-STD-2073-1E packaging standards. Due to the nature of the technical data, the item is subject to ITAR or EAR export controls, requiring offerors to possess an approved US/Canada Joint Certification Program (JCP) certification and DLA authorization to access the data. Additionally, the procurement prohibits the use of additive manufacturing processes without prior approval and mandates compliance with DFARS cybersecurity standards, including safeguarding covered defense information and reporting cyber incidents. Payment and invoicing must be processed electronically through the Wide Area WorkFlow (WAWF) system.

Defense Logistics Agency

POSTED

DEADLINE

VALVE, LINEAR, DIRECTION

Solicitation # SPE7M1-27-T-1728

Solicitation SPE7M1-27-T-1728 is a small business set-aside issued by the Defense Logistics Agency Weapons Support Maritime Supply Chain for the procurement of one linear directional control valve. The required item is identified by NSN 4820015666397 and Deere & Company part number AT345515. The contract specifies a delivery timeframe of five days after receipt of order, with an original required delivery date of September 2, 2026. Shipping is established as FOB Origin, with the final destination and inspection point located at the Distribution Management Office at MCBH Kaneohe Bay, Hawaii. The procurement is governed by strict technical and quality standards, including the DLA Master List of Technical and Quality Requirements and MIL-STD-129 for marking. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements under RP001. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The award process may utilize automated award mechanisms and incorporates the HUBZone price evaluation preference. Key regulatory clauses are included, such as DFARS 252.204-7012 for cybersecurity and safeguarding of defense information, as well as the Buy American and Balance of Payments Program.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

VALVE, LINEAR, DIRECT

Solicitation # SPE7L1-27-T-2909

Solicitation SPE7L1-27-T-2909, issued by the DLA Weapons Support Land Supply Chain, is for the procurement of 15 linear direct control valves, identified by NSN 4820011263316 and Astec Industries Inc part number 31F98. The contract specifies a delivery timeframe of 20 days after order, with the destination for inspection and acceptance being the USS Ft Lauderdale (LPD 28) at FPO AE 09595. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS) by November 9, 2026. The procurement is governed by NAICS code 332912 and includes strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. Marking and labeling must comply with MIL-STD-129, and palletization must follow RP001 requirements. Key regulatory clauses include FAR 52.246-1 for destination inspection, DFARS 252.204-7012 for cybersecurity and incident reporting, and various deviations related to sustainable products and human trafficking. Invoicing and receiving reports are to be processed electronically through the Wide Area WorkFlow (WAWF) system.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

VALVE, REGULATING, FLUID

Solicitation # SPE7M1-27-T-1734

Solicitation SPE7M1-27-T-1734 is a small business set-aside issued by the Defense Logistics Agency for the procurement of 15 fluid pressure regulating valves, identified as critical application items. The requirement specifies part numbers 23011063 and DAX31336 from Allison Transmission Inc, under NSN 4820010794802. Delivery is required within five days after receipt of order, with an original required delivery date of October 26, 2026. The items are to be shipped to the Anniston Army Depot in Alabama, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to quality and packaging standards, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with palletization governed by DLA requirement RP001. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with the Buy American Act and Berry Amendment. Additionally, the solicitation prohibits the use of additive manufacturing for the items and requires adherence to NIST SP 800-171 and DFARS cybersecurity standards for safeguarding covered defense information.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

VALVE, REGULATING, FLUID

Solicitation # SPE7MC-27-T-1302

Solicitation SPE7MC-27-T-1302 is a small business set-aside issued by the Defense Logistics Agency for the procurement of two fluid pressure regulating valves, specifically NSN 4820-00-285-6125 and Watts Regulator Co part number R-119-02C. The contract specifies delivery to Soto Cano Air Base in Comayagua, Honduras, with an original required delivery date of October 23, 2026, and a delivery timeline of 20 days after order. Terms are set as FOB Origin, with both inspection and acceptance occurring at the destination. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 for general packaging and MIL-STD-129 for labeling, while palletization must follow DLA requirement RP001. Technical and quality requirements are governed by the DLA Master List, including the removal of government identification from non-accepted supplies. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The contract incorporates various FAR and DFARS clauses covering cybersecurity, domestic sourcing via the Buy American Act, and the prohibition of covered defense telecommunications equipment.

Defense Logistics Agency

POSTED

DEADLINE

HOSE ASSEMBLY, AIR DUCT

Solicitation # SPE8E9-27-T-0297

Solicitation SPE8E9-27-T-0297 is a Request for Quotations issued by the DLA Troop Support Construction and Equipment MRO Service I for the procurement of 41 units of air breathing air duct hose assemblies, identified by NSN 4240-00-770-0268. The contract requires delivery within 115 days, with a need ship date of March 5, 2027, and an original required delivery date of March 14, 2027. Delivery is FOB Origin, with the final destination being the Distribution Depot Puget Sound in Bremerton, Washington. Both inspection and acceptance will occur at the destination. The contractor must adhere to strict technical and quality requirements as specified in the DLA Master List, as well as packaging and marking standards MIL-STD-2073-1E and MIL-STD-129. Special restrictions include a prohibition on the intentional addition of mercury and a ban on items produced via additive manufacturing unless specifically authorized. The procurement is governed by various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and hazardous material identification. Quotations are due by November 9, 2026, and must be submitted to the issuing office in Philadelphia, Pennsylvania.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # N0010427QX073

Solicitation N0010427QX073, issued by NAVSUP Weapon Systems Support Mechanicsburg, is a request for quotation for the repair of aviation components to support Foreign Military Sales cases. The scope of work includes the repair of three pneumatic motors (NSN 2895013833198, P/N 6769111) and one electronic components assembly (NSN 5998015286638, P/N 7635814). Repaired items must meet original manufacturer specifications and operational requirements, with the contractor maintaining the total equipment baseline configuration. Delivery schedules vary by line item, with some estimated by February 26, 2027, and others required within 180 calendar days of award or induction. The contract mandates strict adherence to quality and packaging standards, including ISO 9001 compliance and MIL-STD-2073-1 for military packaging. All shipments must be marked according to MIL-STD-129 and MIL-STD-130, with specific requirements for DLR labels and FMS bar coding. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system. The solicitation is not a small business set-aside and incorporates various DFARS and FAR clauses regarding cybersecurity, supply chain risk, and trade agreements. Proposals must be submitted electronically to the designated point of contact, and quotes limited solely to test and evaluation fees will not be accepted.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Supplier of Pressure Regulating Valve Body Parts KitsThis subcontract through the Department of Defense involves the supply of four pressure regulating valve body parts kits to support DLA Weapons Support Maritime Hardware contracts. The required components must match NSN 4820009686699, specifically Kitco LLC or Meggitt North Hollywood Inc part number 26310009. Performance will take place in Cherry Point, North Carolina, under NAICS code 332912. The contract mandates strict adherence to Critical Application Item quality standards and requires that all parts meet Buy American Act domestic origin requirements. Additionally, the supplier must complete a CMMC Level 2 self-assessment to ensure cybersecurity compliance. Responses for this requirement are due by November 9, 2026.

CHERRY POINT PHANTOM RD BLDG

POSTED

DEADLINE

Manufacture of Fluid Pressure Regulating Valves (NSN 4820014231922)This subcontract involves the manufacture and supply of two fluid pressure regulating valves under NSN 4820014231922 for the Department of Defense, specifically the DDSP New Cumberland Facility. The scope of work includes the precision machining of valve bodies and internal components, followed by assembly and functionality testing using specialized tooling to ensure all technical data specifications are met. The contractor must strictly adhere to DLA Technical and Quality Requirements as well as domestic origin standards. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332912. The response deadline for this requirement is November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Linear Directional Control Valves (NSN 4820-01-438-8375)This subcontract, set aside for total small businesses under NAICS code 332912, requires the manufacture or procurement of 26 Linear Directional Control Valves for prime contractors supporting DLA Weapons Support Maritime Hardware contracts. All supplied valves must strictly adhere to NSN 4820-01-438-8375 and RA001 technical specifications. The contractor is responsible for ensuring full compliance with the Buy American Act and the Balance of Payments Program. Logistical requirements include packaging items according to ASTM D3951 and RP001 standards, with all shipments labeled in accordance with MIL-STD-129. The final delivery of the 26 valves is designated as FOB Destination to the DDSP New Cumberland facility in Pennsylvania. The response deadline for this opportunity is November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 12 days

AI Contract Overview

This subcontract involves the supply of 13 finished fluid pressure regulating priority valves for prime contractors supporting the Department of Defense DLA Weapons Support Fluid Handling Division. The scope of work requires the manufacture or procurement of Worthington Model 13NL45 and Model 20NL30 valves, which must be sourced from either Circor Aerospace or Curtiss-Wright Electro-Mechanical. All deliverables must be mercury-free and compliant with the Berry Amendment. Strict adherence to quality control standard RA001 is required, with packaging and marking following MIL-STD-2073-1E and MIL-STD-129 guidelines. Performance for this contract is centered in Tracy, California.

General Info

Supply 13 mercury-free fluid pressure valves for DoD via approved aerospace manufacturers.

Agency

Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

NAICS

332912 - Fluid Power Valve and Hose Fitting Manufacturing

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M4-27-T-0715.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

VALVE, REGULATING, FLUID

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedOct 12

subcontract

Response DeadlineOct 23

Deadline has passed

Submission Closed

10/23/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Supplies finished fluid pressure regulating priority valves for prime contractors on DLA Weapons Support Fluid Handling Division projects. Manufactures or procures Worthington Model 13NL45 and Model 20NL30 valves sourced from Curtiss-Wright Electro-Mechanical or Circor Aerospace. Uses Berry Amendment compliant, mercury-free materials. Performs quality control per RA001 and packaging per MIL-STD-2073-1E and MIL-STD-129. Delivers 13 regulating valves.