FLUX, SOLDERING
Active
SPE8E6-26-T-4360FederalResponse Deadline
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
AI Contract Overview
Show more
This contract is for the procurement of silver solder RMA paste, identified by NSN 3439013737966 and conforming to ASTM B32 standards. The requirement consists of two separate line items totaling three units of issue, with delivery required within five days after order. The material must be delivered in glass or plastic jars conforming to PPP-C186 and must maintain at least 85 percent of its shelf life upon receipt. Key compliance requirements include the submission of Safety Data Sheets and hazardous communication labels in accordance with OSHA and Federal Standard 313-E. Packaging and marking must adhere to MIL-STD-129 and ASTM-D3951-15, with specific prohibitions against the intentional addition of mercury. Shipments are destined for locations in South Korea and Washington state, requiring strict adherence to DLA packaging and palletization standards.
General Info
Procurement of silver solder RMA paste for delivery to South Korea and Washington.
Agency
Department Of Defense → Defense Logistics AgencyView Agency
NAICS
325998 - All Other Miscellaneous Chemical Product and Preparation ManufacturingView NAICS
Place of Performance
UNIT 2069, APO, AP, 96278-2069, USASet-Aside
NONE
Documents
(1)AI Contract Breakdown
Uniform Contract FormatWhat is UCF?
Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.
Timeline
PhaseSolicitation
Response Deadline
Organization & Contact Information
Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUSA
Office AddressUSA
Contacts
Full Description
Show more
FLUX,SOLDERING
FLUX,SOLDERING,PASTE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CAGE: 81346 ASTM
PN: ASTM B32
Silver Solder, RMA, Paste
UI = BT = 8OZ QUP = 001
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
NOTE: Bidders SHALL Remit SDS to the Primary Contracting Officer (PCO) at the Email in Block 24 of the Solicitation and the Local Admin at the Email in Block 6 of the Solicitation with their Bid. Address any questions to the PCO or Local Admin.
NOTE: Awardees Copy of SDS shall be included with WAWF and each Pallet.
Materiel shall have 85 percent shelf-life (10 Months/03 Quarters) remaining upon receipt from contractor to first government activity.,,
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
SPE8E6-26-T-4360
SECTION B
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
Hazard Communication Standard Notice:
Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities.
The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals. As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels.
In accordance with the revised standard after June 1, 2015:
1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government.
2. Suppliers will also be required to submit, to the contracting officer for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government.
3. Finally, suppliers must train their employees on the new safety data sheets, hazardous communication labels, and requirements of 29 C.F.R. 1910.1200.
For more information on SDS, refer to OSHAs website, available at:
https://www.osha.gov/law-regs.html
For information on 29 C.F.R. 1910.1200, refer to the below link:
https://www.osha.gov/dsg/hazcom/index.html
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL OF A TYPE')
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
DLA DURING "OPEN SOLICITATION ONLY".
TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
RS055: Shelf life requirement RS001 for a TYPE 2 (CODE 4) item with a shelf life of 12 month (extendable) applies to this item.
TDP Rev A Gen 1 IAW BASIC NON GOVT STD ASTM B32 (R 2014) REVISION NR DTD 05/01/2008 PART PIECE NUMBER: RMA PASTE
SPE8E6-26-T-4360
SECTION B
PR: 7018054871 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018054871 0001 BT 2.000
NSN/MATERIAL:3439013737966
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:33 -33 Type II, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
UNIT CONTAINER SHALL BE GLASS OR PLASTIC JAR THAT CONFORMS TO
REQUIREMENTS OF PPP-C186
PACKAGING AND PACKING SHALL BE IAW ASTM-D3951-15. MARKINGS SHALL BE IAW
MIL-STD-129 (INCLUDING BARCODE AND MSL).
MARKINGS PARAGRAPH: WHEN ASTM D3951, COMMERCIAL PACKAGING IS SPECIFIED,
THE FOLLOWING APPLY:
#ALL SECTION #D# PACKAGING AND MARKING CLAUSES TAKE PRECEDENCE OVER ASTM
D3951.
#IN ADDITION TO REQUIREMENTS IN MIL-STD-129, WHEN COMMERCIAL PACKAGING
IS USED, THE METHOD OF PRESERVATION FOR ALL MIL-STD-129 MARKING AND
LABELING SHALL BE #CP# COMMERCIAL PACK.
#THE UNIT OF ISSUE (U/I) AND QUANTITY PER UNIT PACK (QUP) AS SPECIFIED
IN THE CONTRACT TAKE PRECEDENCE OVER QUP IN ASTM D3951.
ALL UNIT PACKAGES, INTERMEDIATE PACKS, EXTERIOR SHIPPING CONTAINERS,
AND, AS APPLICABLE, UNITIZED LOADS SHALL BE MARKED IN ACCORDANCE WITH
MIL-STD-129, INCLUDING BAR CODING AND A MSL LABEL. THE CONTRACTOR IS
RESPONSIBLE FOR APPLICATION OF SPECIAL MARKINGS AS DISCUSSED IN THE
MILITARY STANDARD REGARDLESS OF WHETHER SPECIFIED IN THE CONTRACT OR
NOT. SPECIAL MARKINGS INCLUDE, BUT ARE NOT LIMITED TO, SHELF-LIFE
MARKINGS, STRUCTURAL MARKINGS, AND TRANSPORTATION SPECIAL HANDLING
SPE8E6-26-T-4360
SECTION B
PR: 7018054871 PRLI: 0001 CONT’D
MARKINGS. THE MARKING OF PILFERABLE AND SENSITIVE MATERIEL WILL NOT
IDENTIFY THE NATURE OF THE MATERIEL. PASSIVE RFID TAGGING IS REQUIRED
IN ALL CONTRACTS THAT CONTAIN DFARS CLAUSE 252.211-7006. CONTRACTORS
MUST CHECK THE SOLICITATION AND/OR CONTRACT FOR THIS CLAUSE. FOR
DETAILS AND MOST RECENT INFORMATION, SEE
HTTP://WWW.ACQ.OSD.MIL/LOG/RFID/INDEX.HTM FOR THE CURRENT DOD SUPPLIERS#
PASSIVE RFID INFORMATION GUIDE AND SUPPLIER IMPLEMENTATION PLAN. IF THE
ITEM HAS UNIQUE ITEM IDENTIFIER (UII) MARKINGS THEN THE UII NEEDS TO BE
2D BAR CODED AND APPLIED ON THE UNIT PACKAGE, INTERMEDIATE AND EXTERIOR
CONTAINERS, AND THE PALLETIZED UNIT LOAD.
PALLETIZATION IS REQUIRED IAW DLAI MD00100452 REV B (07/30/2008). HTTP:
//WWW.DLA.MIL/LANDANDMARITIME/OFFERS/SERVICES/TECHNICALSUPPORT/LOGISTICS
/PACKAGING/PALLETIZATION.ASPX
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
PARCEL POST ADDRESS:
FB5294
FB5294 51 LRS LGRDDC
UNIT 2069
APO AP 96278-2069
US
RDD 777 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
FB5294
FB5294 51 LRS LGRDDC
CP 011 82 505 784 5085
OSAN AB BLDG 824 SINJANG DONG
PYEONGTAEK CITY 17759
KR
M/F: (TCN) FB529462350021
RDD: 777
PROJ: TP 1
SUPP ADD: YAZ155 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A01 DIST: 01 ADV: 3G FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:08/27/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE8E6-26-T-4360
SECTION B
PR: 7018037933 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7018037933 0001 BT 1.000
NSN/MATERIAL:3439013737966
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:33 -33 Type II, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
UNIT CONTAINER SHALL BE GLASS OR PLASTIC JAR THAT CONFORMS TO
REQUIREMENTS OF PPP-C186
PACKAGING AND PACKING SHALL BE IAW ASTM-D3951-15. MARKINGS SHALL BE IAW
MIL-STD-129 (INCLUDING BARCODE AND MSL).
MARKINGS PARAGRAPH: WHEN ASTM D3951, COMMERCIAL PACKAGING IS SPECIFIED,
THE FOLLOWING APPLY:
#ALL SECTION #D# PACKAGING AND MARKING CLAUSES TAKE PRECEDENCE OVER ASTM
D3951.
#IN ADDITION TO REQUIREMENTS IN MIL-STD-129, WHEN COMMERCIAL PACKAGING
IS USED, THE METHOD OF PRESERVATION FOR ALL MIL-STD-129 MARKING AND
LABELING SHALL BE #CP# COMMERCIAL PACK.
#THE UNIT OF ISSUE (U/I) AND QUANTITY PER UNIT PACK (QUP) AS SPECIFIED
IN THE CONTRACT TAKE PRECEDENCE OVER QUP IN ASTM D3951.
ALL UNIT PACKAGES, INTERMEDIATE PACKS, EXTERIOR SHIPPING CONTAINERS,
AND, AS APPLICABLE, UNITIZED LOADS SHALL BE MARKED IN ACCORDANCE WITH
MIL-STD-129, INCLUDING BAR CODING AND A MSL LABEL. THE CONTRACTOR IS
RESPONSIBLE FOR APPLICATION OF SPECIAL MARKINGS AS DISCUSSED IN THE
MILITARY STANDARD REGARDLESS OF WHETHER SPECIFIED IN THE CONTRACT OR
NOT. SPECIAL MARKINGS INCLUDE, BUT ARE NOT LIMITED TO, SHELF-LIFE
MARKINGS, STRUCTURAL MARKINGS, AND TRANSPORTATION SPECIAL HANDLING
MARKINGS. THE MARKING OF PILFERABLE AND SENSITIVE MATERIEL WILL NOT
IDENTIFY THE NATURE OF THE MATERIEL. PASSIVE RFID TAGGING IS REQUIRED
IN ALL CONTRACTS THAT CONTAIN DFARS CLAUSE 252.211-7006. CONTRACTORS
MUST CHECK THE SOLICITATION AND/OR CONTRACT FOR THIS CLAUSE. FOR
DETAILS AND MOST RECENT INFORMATION, SEE
HTTP://WWW.ACQ.OSD.MIL/LOG/RFID/INDEX.HTM FOR THE CURRENT DOD SUPPLIERS#
PASSIVE RFID INFORMATION GUIDE AND SUPPLIER IMPLEMENTATION PLAN. IF THE
SPE8E6-26-T-4360
SECTION B
PR: 7018037933 PRLI: 0001 CONT’D
ITEM HAS UNIQUE ITEM IDENTIFIER (UII) MARKINGS THEN THE UII NEEDS TO BE
2D BAR CODED AND APPLIED ON THE UNIT PACKAGE, INTERMEDIATE AND EXTERIOR
CONTAINERS, AND THE PALLETIZED UNIT LOAD.
PALLETIZATION IS REQUIRED IAW DLAI MD00100452 REV B (07/30/2008). HTTP:
//WWW.DLA.MIL/LANDANDMARITIME/OFFERS/SERVICES/TECHNICALSUPPORT/LOGISTICS
/PACKAGING/PALLETIZATION.ASPX
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0 UNIT CONT:10 OPI:M INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:33 -33 Type II, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
UNIT CONTAINER SHALL BE GLASS OR PLASTIC JAR THAT CONFORMS TO
REQUIREMENTS OF PPP-C186
PACKAGING AND PACKING SHALL BE IAW ASTM-D3951-15. MARKINGS SHALL BE IAW
MIL-STD-129 (INCLUDING BARCODE AND MSL).
MARKINGS PARAGRAPH: WHEN ASTM D3951, COMMERCIAL PACKAGING IS SPECIFIED,
THE FOLLOWING APPLY:
#ALL SECTION #D# PACKAGING AND MARKING CLAUSES TAKE PRECEDENCE OVER ASTM
D3951.
#IN ADDITION TO REQUIREMENTS IN MIL-STD-129, WHEN COMMERCIAL PACKAGING
IS USED, THE METHOD OF PRESERVATION FOR ALL MIL-STD-129 MARKING AND
LABELING SHALL BE #CP# COMMERCIAL PACK.
#THE UNIT OF ISSUE (U/I) AND QUANTITY PER UNIT PACK (QUP) AS SPECIFIED
IN THE CONTRACT TAKE PRECEDENCE OVER QUP IN ASTM D3951.
ALL UNIT PACKAGES, INTERMEDIATE PACKS, EXTERIOR SHIPPING CONTAINERS,
AND, AS APPLICABLE, UNITIZED LOADS SHALL BE MARKED IN ACCORDANCE WITH
MIL-STD-129, INCLUDING BAR CODING AND A MSL LABEL. THE CONTRACTOR IS
RESPONSIBLE FOR APPLICATION OF SPECIAL MARKINGS AS DISCUSSED IN THE
MILITARY STANDARD REGARDLESS OF WHETHER SPECIFIED IN THE CONTRACT OR
NOT. SPECIAL MARKINGS INCLUDE, BUT ARE NOT LIMITED TO, SHELF-LIFE
MARKINGS, STRUCTURAL MARKINGS, AND TRANSPORTATION SPECIAL HANDLING
MARKINGS. THE MARKING OF PILFERABLE AND SENSITIVE MATERIEL WILL NOT
IDENTIFY THE NATURE OF THE MATERIEL. PASSIVE RFID TAGGING IS REQUIRED
IN ALL CONTRACTS THAT CONTAIN DFARS CLAUSE 252.211-7006. CONTRACTORS
MUST CHECK THE SOLICITATION AND/OR CONTRACT FOR THIS CLAUSE. FOR
DETAILS AND MOST RECENT INFORMATION, SEE
HTTP://WWW.ACQ.OSD.MIL/LOG/RFID/INDEX.HTM FOR THE CURRENT DOD SUPPLIERS#
PASSIVE RFID INFORMATION GUIDE AND SUPPLIER IMPLEMENTATION PLAN. IF THE
ITEM HAS UNIQUE ITEM IDENTIFIER (UII) MARKINGS THEN THE UII NEEDS TO BE
2D BAR CODED AND APPLIED ON THE UNIT PACKAGE, INTERMEDIATE AND EXTERIOR
CONTAINERS, AND THE PALLETIZED UNIT LOAD.
PALLETIZATION IS REQUIRED IAW DLAI MD00100452 REV B (07/30/2008). HTTP:
//WWW.DLA.MIL/LANDANDMARITIME/OFFERS/SERVICES/TECHNICALSUPPORT/LOGISTICS
/PACKAGING/PALLETIZATION.ASPX
SPE8E6-26-T-4360
SECTION B
PR: 7018037933 PRLI: 0001 CONT’D
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
BULK BREAK POINT:
W8005Q
W6YX USALRCTR JB LEWIS M
HMCC SARSS 1
PERRY AVE BLDG 9669
JOINT BASE LEWIS MCCH WA 98433-5000
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W8005Q
W6YX USALRCTR JB LEWIS M
HMCC SARSS 1
PERRY AVE BLDG 9669
JOINT BASE LEWIS MCCH WA 98433-5000
US
MARKFOR
W8005Q
W6YX USALRCTR JB LEWIS M
HMCC SARSS 1
PERRY AVE BLDG 9669
JOINT BASE LEWIS MCCH WA 98433-5000
US
M/F: (TCN) FP447962300305
RDD: 230
PROJ: TP 2
SUPP ADD: W8005Q SIG: J
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A3A DIST: ADV: FC: 68
Need Ship Date:00/00/0000 Original Required Delivery Date:08/24/2026
SPE8E6-26-T-4360 NSN/Part Number: 3439-01-373-7966 Quantity: 2 BT Purchase Request: 7018037933QTY: 1 Delivery: 5 days ADO
FLUX,SOLDERING,PASTE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CAGE: 81346 ASTM
PN: ASTM B32
Silver Solder, RMA, Paste
UI = BT = 8OZ QUP = 001
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
NOTE: Bidders SHALL Remit SDS to the Primary Contracting Officer (PCO) at the Email in Block 24 of the Solicitation and the Local Admin at the Email in Block 6 of the Solicitation with their Bid. Address any questions to the PCO or Local Admin.
NOTE: Awardees Copy of SDS shall be included with WAWF and each Pallet.
Materiel shall have 85 percent shelf-life (10 Months/03 Quarters) remaining upon receipt from contractor to first government activity.,,
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
SPE8E6-26-T-4360
SECTION B
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
Hazard Communication Standard Notice:
Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities.
The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals. As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels.
In accordance with the revised standard after June 1, 2015:
1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government.
2. Suppliers will also be required to submit, to the contracting officer for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government.
3. Finally, suppliers must train their employees on the new safety data sheets, hazardous communication labels, and requirements of 29 C.F.R. 1910.1200.
For more information on SDS, refer to OSHAs website, available at:
https://www.osha.gov/law-regs.html
For information on 29 C.F.R. 1910.1200, refer to the below link:
https://www.osha.gov/dsg/hazcom/index.html
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL OF A TYPE')
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
DLA DURING "OPEN SOLICITATION ONLY".
TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
RS055: Shelf life requirement RS001 for a TYPE 2 (CODE 4) item with a shelf life of 12 month (extendable) applies to this item.
TDP Rev A Gen 1 IAW BASIC NON GOVT STD ASTM B32 (R 2014) REVISION NR DTD 05/01/2008 PART PIECE NUMBER: RMA PASTE
SPE8E6-26-T-4360
SECTION B
PR: 7018054871 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018054871 0001 BT 2.000
NSN/MATERIAL:3439013737966
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:33 -33 Type II, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
UNIT CONTAINER SHALL BE GLASS OR PLASTIC JAR THAT CONFORMS TO
REQUIREMENTS OF PPP-C186
PACKAGING AND PACKING SHALL BE IAW ASTM-D3951-15. MARKINGS SHALL BE IAW
MIL-STD-129 (INCLUDING BARCODE AND MSL).
MARKINGS PARAGRAPH: WHEN ASTM D3951, COMMERCIAL PACKAGING IS SPECIFIED,
THE FOLLOWING APPLY:
#ALL SECTION #D# PACKAGING AND MARKING CLAUSES TAKE PRECEDENCE OVER ASTM
D3951.
#IN ADDITION TO REQUIREMENTS IN MIL-STD-129, WHEN COMMERCIAL PACKAGING
IS USED, THE METHOD OF PRESERVATION FOR ALL MIL-STD-129 MARKING AND
LABELING SHALL BE #CP# COMMERCIAL PACK.
#THE UNIT OF ISSUE (U/I) AND QUANTITY PER UNIT PACK (QUP) AS SPECIFIED
IN THE CONTRACT TAKE PRECEDENCE OVER QUP IN ASTM D3951.
ALL UNIT PACKAGES, INTERMEDIATE PACKS, EXTERIOR SHIPPING CONTAINERS,
AND, AS APPLICABLE, UNITIZED LOADS SHALL BE MARKED IN ACCORDANCE WITH
MIL-STD-129, INCLUDING BAR CODING AND A MSL LABEL. THE CONTRACTOR IS
RESPONSIBLE FOR APPLICATION OF SPECIAL MARKINGS AS DISCUSSED IN THE
MILITARY STANDARD REGARDLESS OF WHETHER SPECIFIED IN THE CONTRACT OR
NOT. SPECIAL MARKINGS INCLUDE, BUT ARE NOT LIMITED TO, SHELF-LIFE
MARKINGS, STRUCTURAL MARKINGS, AND TRANSPORTATION SPECIAL HANDLING
SPE8E6-26-T-4360
SECTION B
PR: 7018054871 PRLI: 0001 CONT’D
MARKINGS. THE MARKING OF PILFERABLE AND SENSITIVE MATERIEL WILL NOT
IDENTIFY THE NATURE OF THE MATERIEL. PASSIVE RFID TAGGING IS REQUIRED
IN ALL CONTRACTS THAT CONTAIN DFARS CLAUSE 252.211-7006. CONTRACTORS
MUST CHECK THE SOLICITATION AND/OR CONTRACT FOR THIS CLAUSE. FOR
DETAILS AND MOST RECENT INFORMATION, SEE
HTTP://WWW.ACQ.OSD.MIL/LOG/RFID/INDEX.HTM FOR THE CURRENT DOD SUPPLIERS#
PASSIVE RFID INFORMATION GUIDE AND SUPPLIER IMPLEMENTATION PLAN. IF THE
ITEM HAS UNIQUE ITEM IDENTIFIER (UII) MARKINGS THEN THE UII NEEDS TO BE
2D BAR CODED AND APPLIED ON THE UNIT PACKAGE, INTERMEDIATE AND EXTERIOR
CONTAINERS, AND THE PALLETIZED UNIT LOAD.
PALLETIZATION IS REQUIRED IAW DLAI MD00100452 REV B (07/30/2008). HTTP:
//WWW.DLA.MIL/LANDANDMARITIME/OFFERS/SERVICES/TECHNICALSUPPORT/LOGISTICS
/PACKAGING/PALLETIZATION.ASPX
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
PARCEL POST ADDRESS:
FB5294
FB5294 51 LRS LGRDDC
UNIT 2069
APO AP 96278-2069
US
RDD 777 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
FB5294
FB5294 51 LRS LGRDDC
CP 011 82 505 784 5085
OSAN AB BLDG 824 SINJANG DONG
PYEONGTAEK CITY 17759
KR
M/F: (TCN) FB529462350021
RDD: 777
PROJ: TP 1
SUPP ADD: YAZ155 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A01 DIST: 01 ADV: 3G FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:08/27/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE8E6-26-T-4360
SECTION B
PR: 7018037933 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7018037933 0001 BT 1.000
NSN/MATERIAL:3439013737966
DELIVERY (IN DAYS):0005
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:Q PACKING LEVEL: B
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:33 -33 Type II, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
UNIT CONTAINER SHALL BE GLASS OR PLASTIC JAR THAT CONFORMS TO
REQUIREMENTS OF PPP-C186
PACKAGING AND PACKING SHALL BE IAW ASTM-D3951-15. MARKINGS SHALL BE IAW
MIL-STD-129 (INCLUDING BARCODE AND MSL).
MARKINGS PARAGRAPH: WHEN ASTM D3951, COMMERCIAL PACKAGING IS SPECIFIED,
THE FOLLOWING APPLY:
#ALL SECTION #D# PACKAGING AND MARKING CLAUSES TAKE PRECEDENCE OVER ASTM
D3951.
#IN ADDITION TO REQUIREMENTS IN MIL-STD-129, WHEN COMMERCIAL PACKAGING
IS USED, THE METHOD OF PRESERVATION FOR ALL MIL-STD-129 MARKING AND
LABELING SHALL BE #CP# COMMERCIAL PACK.
#THE UNIT OF ISSUE (U/I) AND QUANTITY PER UNIT PACK (QUP) AS SPECIFIED
IN THE CONTRACT TAKE PRECEDENCE OVER QUP IN ASTM D3951.
ALL UNIT PACKAGES, INTERMEDIATE PACKS, EXTERIOR SHIPPING CONTAINERS,
AND, AS APPLICABLE, UNITIZED LOADS SHALL BE MARKED IN ACCORDANCE WITH
MIL-STD-129, INCLUDING BAR CODING AND A MSL LABEL. THE CONTRACTOR IS
RESPONSIBLE FOR APPLICATION OF SPECIAL MARKINGS AS DISCUSSED IN THE
MILITARY STANDARD REGARDLESS OF WHETHER SPECIFIED IN THE CONTRACT OR
NOT. SPECIAL MARKINGS INCLUDE, BUT ARE NOT LIMITED TO, SHELF-LIFE
MARKINGS, STRUCTURAL MARKINGS, AND TRANSPORTATION SPECIAL HANDLING
MARKINGS. THE MARKING OF PILFERABLE AND SENSITIVE MATERIEL WILL NOT
IDENTIFY THE NATURE OF THE MATERIEL. PASSIVE RFID TAGGING IS REQUIRED
IN ALL CONTRACTS THAT CONTAIN DFARS CLAUSE 252.211-7006. CONTRACTORS
MUST CHECK THE SOLICITATION AND/OR CONTRACT FOR THIS CLAUSE. FOR
DETAILS AND MOST RECENT INFORMATION, SEE
HTTP://WWW.ACQ.OSD.MIL/LOG/RFID/INDEX.HTM FOR THE CURRENT DOD SUPPLIERS#
PASSIVE RFID INFORMATION GUIDE AND SUPPLIER IMPLEMENTATION PLAN. IF THE
SPE8E6-26-T-4360
SECTION B
PR: 7018037933 PRLI: 0001 CONT’D
ITEM HAS UNIQUE ITEM IDENTIFIER (UII) MARKINGS THEN THE UII NEEDS TO BE
2D BAR CODED AND APPLIED ON THE UNIT PACKAGE, INTERMEDIATE AND EXTERIOR
CONTAINERS, AND THE PALLETIZED UNIT LOAD.
PALLETIZATION IS REQUIRED IAW DLAI MD00100452 REV B (07/30/2008). HTTP:
//WWW.DLA.MIL/LANDANDMARITIME/OFFERS/SERVICES/TECHNICALSUPPORT/LOGISTICS
/PACKAGING/PALLETIZATION.ASPX
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:HM CLNG/DRY:1 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0 UNIT CONT:10 OPI:M INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:33 -33 Type II, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
UNIT CONTAINER SHALL BE GLASS OR PLASTIC JAR THAT CONFORMS TO
REQUIREMENTS OF PPP-C186
PACKAGING AND PACKING SHALL BE IAW ASTM-D3951-15. MARKINGS SHALL BE IAW
MIL-STD-129 (INCLUDING BARCODE AND MSL).
MARKINGS PARAGRAPH: WHEN ASTM D3951, COMMERCIAL PACKAGING IS SPECIFIED,
THE FOLLOWING APPLY:
#ALL SECTION #D# PACKAGING AND MARKING CLAUSES TAKE PRECEDENCE OVER ASTM
D3951.
#IN ADDITION TO REQUIREMENTS IN MIL-STD-129, WHEN COMMERCIAL PACKAGING
IS USED, THE METHOD OF PRESERVATION FOR ALL MIL-STD-129 MARKING AND
LABELING SHALL BE #CP# COMMERCIAL PACK.
#THE UNIT OF ISSUE (U/I) AND QUANTITY PER UNIT PACK (QUP) AS SPECIFIED
IN THE CONTRACT TAKE PRECEDENCE OVER QUP IN ASTM D3951.
ALL UNIT PACKAGES, INTERMEDIATE PACKS, EXTERIOR SHIPPING CONTAINERS,
AND, AS APPLICABLE, UNITIZED LOADS SHALL BE MARKED IN ACCORDANCE WITH
MIL-STD-129, INCLUDING BAR CODING AND A MSL LABEL. THE CONTRACTOR IS
RESPONSIBLE FOR APPLICATION OF SPECIAL MARKINGS AS DISCUSSED IN THE
MILITARY STANDARD REGARDLESS OF WHETHER SPECIFIED IN THE CONTRACT OR
NOT. SPECIAL MARKINGS INCLUDE, BUT ARE NOT LIMITED TO, SHELF-LIFE
MARKINGS, STRUCTURAL MARKINGS, AND TRANSPORTATION SPECIAL HANDLING
MARKINGS. THE MARKING OF PILFERABLE AND SENSITIVE MATERIEL WILL NOT
IDENTIFY THE NATURE OF THE MATERIEL. PASSIVE RFID TAGGING IS REQUIRED
IN ALL CONTRACTS THAT CONTAIN DFARS CLAUSE 252.211-7006. CONTRACTORS
MUST CHECK THE SOLICITATION AND/OR CONTRACT FOR THIS CLAUSE. FOR
DETAILS AND MOST RECENT INFORMATION, SEE
HTTP://WWW.ACQ.OSD.MIL/LOG/RFID/INDEX.HTM FOR THE CURRENT DOD SUPPLIERS#
PASSIVE RFID INFORMATION GUIDE AND SUPPLIER IMPLEMENTATION PLAN. IF THE
ITEM HAS UNIQUE ITEM IDENTIFIER (UII) MARKINGS THEN THE UII NEEDS TO BE
2D BAR CODED AND APPLIED ON THE UNIT PACKAGE, INTERMEDIATE AND EXTERIOR
CONTAINERS, AND THE PALLETIZED UNIT LOAD.
PALLETIZATION IS REQUIRED IAW DLAI MD00100452 REV B (07/30/2008). HTTP:
//WWW.DLA.MIL/LANDANDMARITIME/OFFERS/SERVICES/TECHNICALSUPPORT/LOGISTICS
/PACKAGING/PALLETIZATION.ASPX
SPE8E6-26-T-4360
SECTION B
PR: 7018037933 PRLI: 0001 CONT’D
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
BULK BREAK POINT:
W8005Q
W6YX USALRCTR JB LEWIS M
HMCC SARSS 1
PERRY AVE BLDG 9669
JOINT BASE LEWIS MCCH WA 98433-5000
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W8005Q
W6YX USALRCTR JB LEWIS M
HMCC SARSS 1
PERRY AVE BLDG 9669
JOINT BASE LEWIS MCCH WA 98433-5000
US
MARKFOR
W8005Q
W6YX USALRCTR JB LEWIS M
HMCC SARSS 1
PERRY AVE BLDG 9669
JOINT BASE LEWIS MCCH WA 98433-5000
US
M/F: (TCN) FP447962300305
RDD: 230
PROJ: TP 2
SUPP ADD: W8005Q SIG: J
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A3A DIST: ADV: FC: 68
Need Ship Date:00/00/0000 Original Required Delivery Date:08/24/2026
SPE8E6-26-T-4360 NSN/Part Number: 3439-01-373-7966 Quantity: 2 BT Purchase Request: 7018037933QTY: 1 Delivery: 5 days ADO
Similar Contracts
Same NAICS industry code
More opportunities from Department Of Defense → Defense Logistics Agency
Same awarding agency