Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

N0038326PR0R698_FMS

Active
N0038326QN117Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This procurement is a sole-source Foreign Military Sales (FMS) repair action for two units of the SYNTHESIZER, ELECTR (NSN: 7R5821002527995, Part Number: 609-1044-001) under FMS Case TW-P-MCS, intended for delivery to Cedar Rapids, Iowa. The Department of Defense, through NAVSUP Weapon Systems Support in Philadelphia, Pennsylvania, is the contracting activity, and the requirement is exclusively allocated to ROCKWELL COLLINS, INC (CAGE 13499) based on authority under 10 U.S.C. 2304(c)(1) and FAR 6.302-1. Source approval is a mandatory pass/fail gate for award, requiring any firm not already approved to submit a Source Approval Request (SAR); however, the procurement will proceed without delay even if SAR approval is pending. Buy American Clauses will apply and are expected to be included in the formal solicitation, though specific packaging, marking, inspection, and acceptance criteria are not yet defined. Unique Item Identification (UID) requirements do not apply due to the FMS nature of the requirement. This action is not set aside for small businesses, and interested parties must submit proposals via email to the designated contract specialist by the proposed deadline of August 20, 2026, with proposals received within 15 days of the synopsis posting also eligible for consideration. Contract value, performance period, delivery schedule, and formal evaluation factors remain unspecified at this pre-solicitation stage.

General Info

Presolicitation for electrical repair services in Cedar Rapids, Iowa, open to all, due July 16, 2026.

Agency

Department Of Defense → Navsup Weapon Systems SupportView Agency

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component ManufacturingView NAICS

Place of Performance

PA

Set-Aside

NONE

Documents

(2)

RFQ Synopsis N0038326PR0R698 for Synthesizer Repair

PDFsources-sought

Solicitation+-+N0038326QN117.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Presolicitation

Type Changed

Presolicitation → Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support
Contacts2 people available
OfficePHILADELPHIA, PA, 19111-5098, USA
Organization / Agency
Department Of Defense → Navsup Weapon Systems Support
View Agency Profile
Office AddressPHILADELPHIA, PA, 19111-5098, USA
Contacts
DINA WOJCIECHOWSKI
DINA WOJCIECHOWSKI

Full Description

Show more
NSN --002527995-, TDP VER 001, PN 609-1044-001 , QTY 2 , DELIVERY FOB Origin (Shipping Point)

Similar Contracts

Same NAICS industry code

NAICS: 335999
New
DIBBS
SLEEVING, TEXTILE, ELThe contract specifies the procurement of textile electrical sleeving with the NSN 5970-01-496-9406 and part number AA59301-8, quantity of 2,314 linear feet, to be delivered FOB origin within 171 days after order award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over any commercial standards such as ASTM D3951. Sampling and inspection protocols require compliance with MIL-STD-1916 or ASQ H1331, Table 1, using zero-defect acceptance unless otherwise specified; critical attributes are verified at level VII with an AQL of 0.1, major at level IV with an AQL of 1.0, and minor at level II with an AQL of 4.0. The product is classified as a critical application item and must be physically marked in accordance with RQ017. Packaging must adhere to MIL-STD-129 for labeling and marking, and palletization must meet DLA’s RP001 requirements, with hazardous material packaged under TQ IP025 and non-hazardous material under ASTM D3951 only if not superseded by DLA standards. Inspection and acceptance occur at the destination point, with a permissible quantity variance of plus or minus 10 percent. Delivery must be shipped to DLA Distribution Cherry Point in North Carolina, with a required ship date of January 17, 2027, and the original delivery deadline was November 13, 2026. The contract falls under solicitation SPE4A6-26-T-08DU, issued by the Department of Defense’s ASC Commodities Division, with Angela Boyce as the point of contact, and is classified under NAICS code 335999.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
INSULATION BLANKET, ELEThe contract specifies the procurement of an electrical insulation blanket identified by NSN 5970-00-089-7607 and part number WSA900E, with a quantity of nine units to be delivered within 171 days under contract SPE4A6-26-T-08HK. The unit price is $9.00 per unit, totaling $81.00, and delivery must be FOB origin with no variance allowed in quantity. The inspection and acceptance points are both set at the destination, and the material must be shipped by the required ship date of January 17, 2027, with an original required delivery date of December 21, 2026. Packaging must comply with DLA’s RP001 requirements and MIL-STD-129 for marking and labeling, and if non-hazardous, must meet ASTM D3951, though DLA Master List requirements override any conflicting commercial standards. Hazardous material, if applicable, must adhere to TQ requirement IP025 as defined in FED-STD-313. The shipment must be palletized per RP001 and sent to the designated federal receiving facility in Tracy, California, with transportation rules outlined in DLAD PROC NOTES C19 and C20. Sampling and quality verification must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances unless otherwise stated, and critical, major, and minor attributes must be assigned verification levels VII, IV, and II, or AQLs of 0.1, 1.0, and 4.0. All technical and quality specifications referenced via R or I numbers are controlled by the DLA Master List of Technical and Quality Requirements in effect at the solicitation or award date.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
CABLE ASSEMBLY, SPECThis contract outlines the procurement of a special-purpose electrical cable assembly identified by NSN 5995-01-572-0145 and part number BTA-70413-760, with a firm fixed price and a strict quantity of thirty units requiring zero variance in delivery. The delivery must be completed within 177 days after the award date, with FOB origin terms and inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and be marked and labeled per MIL-STD-129, with palletization adhering to DLA’s RP001 packaging requirements, while all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements take precedence. The contract prohibits the intentional use of mercury or mercury-containing compounds in materials, with exceptions limited to specific functional applications such as batteries, fluorescent lights, and Navy-specified instruments, which must include secondary containment for safety. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are to be classified with defined verification levels or AQLs. The supplier must comply with CMMC Level 2 cybersecurity self-assessment requirements and physically mark items as mandated. The procurement is a total small business set-aside under FAR 19.5, and the contract references specific DLA procedural notes for transportation and shipping. The point of contact for inquiries is Kymberley Ferguson of the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335999
New
DIBBS
INSULATION SLEEVING, ELThis contract specifies the procurement of electrical insulation sleeving identified by part number M23053/8-009-C and NSN 5970002238318, with a unit of issue defined as one length (LG) equaling four feet. The total quantity ordered is four lengths, with a delivery requirement of 81 days FOB origin and zero variance allowed in quantity. The item is classified as a critical application item with a shelf life of 60 months, extendable, and must be marked in accordance with MIL-STD-129 using special marking code 33 for Type II shelf life identification. Packaging must conform to MIL-STD-2073-1E and DLA’s packaging requirements, with palletization and intermediate containment following specified codes and standards. The product is subject to strict compliance with technical and quality requirements referenced through R-numbers, including cybersecurity maturity model certification Level 2 self-assessment, and must not contain intentionally added mercury or mercury compounds except under narrow exemptions for specific functional uses, with secondary containment required for any permitted exceptions. The item is governed by industry standards including SAE AS23053/8 Revision A and requires adherence to qualified products list (QPL) or qualified manufacturers list (QML) qualifications as defined in procurement note H02. Sampling and inspection protocols follow MIL-STD-1916 or comparable zero-based plans with verification levels or AQLs assigned to critical, major, and minor attributes, where unspecified attributes are treated as major. Acceptance is conditioned on zero non-conformances unless otherwise stated, and inspection and acceptance occur at the destination. The contract mandates compliance with all DLA master-listed technical and quality requirements, and while hazardous material indicators show no hazard classification, a safety data sheet review is not required. The solicitation, issued under SPE4A6-26-T-08HJ by the Department of Defense’s ASC Commodities Division, was posted on July 21, 2026, with responses due by July 29, 2026, and performance location specified at Hill AFB, Utah.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELECTRThis contract specifies the procurement of electrical insulation tape, identified by NSN 5970014646819 and part number SCOTCHRAP50,1.00INWDX0.010THK, supplied by 3M Company through its Minnesota Mining and Manufacturing division. The item is designated as a critical application with sole source authorization, requiring written concurrence from the cognizant technical or quality office for any deviation from the original equipment manufacturer. The tape must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including zero non-conformances in sampling under MIL-STD-1916 or equivalent zero-based plans, and adherence to specified verification levels for attributes. Mercury or mercury-containing compounds are strictly prohibited unless explicitly exempted for functional components like batteries or instruments, and any portable devices containing mercury must include shock protection and a secondary containment barrier per NAVSEA requirements. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129 for labeling and marking, with no special marking required. The unit of issue is one roll equaling 100 feet, with a contracted quantity of 139 rolls, and delivery is f.o.b. origin with inspection and acceptance occurring at destination. The delivery schedule requires fulfillment within 171 days, with an original required delivery date of August 1, 2027, and a needed ship date of January 17, 2027. The item is to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, and shipping must comply with DLA procedural notes for transportation. A Certificate of Conformance is not permitted unless explicitly approved by the End-Item Support Activity. Packaging and shipping of hazardous materials must follow IP025 guidelines, and all documentation must satisfy source approval and inspection requirements, including origin inspection as mandatory.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
STUFFING TUBEThe contract is for the procurement of 48 stuffing tubes under solicitation SPE4A7-26-T-588M with a delivery deadline of 171 days after award. The item is identified by NSN 5975-01-408-3021 and falls under NAICS code 335999. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. Inspection and acceptance occur at the manufacturer’s origin. The product must be free of intentional mercury or mercury compounds except in specific exempted uses such as batteries, fluorescent lamps, instruments, or sensors, with portable devices containing mercury requiring shock-proof construction and secondary containment per NAVSEA 5100-003D. Technical data associated with this item is subject to ITAR or EAR export controls, restricting disclosure to foreign persons even within the U.S., and DFARS 252.225-7048 applies. Access to this controlled data is limited to DLA contractors with approved JCP certification, completed training on handling DOD export-controlled technical data, and formal authorization from the DLA controlling authority. The contracting office is the ASC Supplier Oper AE and AF Division of the Department of Defense, with performance location in New Cumberland, PA, and primary point of contact at Dedrick Benson.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
RING ASSEMBLY, ELECTThe contract pertains to the procurement of a Ring Assembly, Electrical Contact with part number 9706D67G01 and NSN 5977-01-120-5419, supplied by Curtis-Wright Electro-Mechanical Corp, CAGE 04808. The item is classified as a critical application component and must comply with a suite of stringent technical, quality, and packaging requirements derived from the DLA Master List of Technical and Quality Requirements, including specific provisions for configuration change management, verification levels, and inspection standards. Sampling and acceptance criteria mandate zero non-conformances under MIL-STD-1916 or ASQ H1331 unless otherwise specified, with attributes designated as critical, major, or minor assigned corresponding verification levels or AQLs. The item is subject to strict mercury restrictions, prohibiting intentional addition or direct contact with mercury or its compounds except in limited exceptions such as functional batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or specified chemical reagents, with portable mercury-containing devices requiring shock-proof design and secondary containment per NAVSEA 5100-003D. All packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129, with palletization aligned to DLA packaging standards and no special marking required. Delivery is FOB origin, with inspection and acceptance occurring at destination, and no quantity variance is permitted. The required delivery date is set for 171 days after award, with the original required delivery date noted as November 28, 2028, and the need ship date specified as January 17, 2027. The contract awards two units at a unit price of $2.00 for a total value of $4.00, with shipping directed to the DLA Distribution Depot in Bremerton, WA, under DLA transportation provisions C19 and C20.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → Navsup Weapon Systems Support

Same awarding agency

NAICS: 336413
New
Federal
16--DRIVE UNIT,ANGLE, IN REPAIR/MODIFICATION OFThe U.S. Navy, through NAVSUP Weapon Systems Support in Philadelphia, intends to procure two Drive Units, Angle with NSN 7R-1680-016954767-H5 and part number 06381-05000-042 solely from Sikorsky Aircraft Corp, the original equipment manufacturer and the only identified source capable of providing this critical component. No technical data, drawings, or design rights are owned by the government, eliminating the possibility of sourcing from alternate suppliers. This sole-source action is authorized under 10 U.S.C. 2304(c)(1) and FAR 6.302, and any entity not already approved to manufacture this part must submit a Source Approval Request, though the procurement will proceed without delay for pending SAR approvals. The transaction will be conducted under FAR Part 15 procedures, excluding FAR Part 12 commercial item acquisition policies, and will not be set aside for small businesses. Deliveries are FOB origin, with an anticipated award date in December 2026. All submissions must be sent electronically by email to the designated point of contact, with no hard copies or telephone inquiries accepted. The solicitation will be posted to NECO, and while this is not a formal request for proposals, responses received within 35 days of the posting will be evaluated to determine the necessity of competitive sourcing.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 29 days
View Details
NAICS: 333998
New
Federal
CABLE ASSEMBLYThe contract pertains to the procurement of a cable assembly under solicitation number N0038326QQB37, issued by the Naval Supply Systems Command Weapon Systems Support, with performance to be managed through the Department of Defense. The requirement is designated as AOG, indicating an urgent need for expedited delivery, and is associated with BUNO number 166815. All markings must comply with MIL-STD-130, and packaging must adhere to MIL-STD-2073 as stipulated elsewhere in the schedule. The contract mandates the use of Workflow Pro’s Assist Module and designates Jessica Harpel as the point of contact for coordination, with her email and phone number provided for communication. Payment processing requires submission of combined invoice and receiving reports, with final acceptance occurring at the inspection site tied to the contract number N00383. The contract incorporates numerous federal clauses and certifications, including mandatory compliance with Buy American provisions under the Free Trade Agreements and Balance of Payments Program, a one-year warranty on noncomplex supplies beginning at the date of delivery, with defects reportable within 45 days of discovery. It enforces limitations on pass-through charges, prohibits security-related exclusions, and requires adherence to equal opportunity standards for workers with disabilities. A priority rating notice is active for national defense purposes, and the offeror must comply with the Navy’s release of information requirements under the AbilityOne program. All representations and certifications must be current under the deviation effective February 2026, and the response deadline for submissions is August 20, 2026. The solicitation is not subject to specific set-asides, and applicable documents and quality assurance provisions are deemed not applicable.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 29 days
View Details
NAICS: 334290
New
Federal
N0038326PR0R690_FMSThe contract pertains to a sole source procurement by the Naval Supply Systems Command Weapon Systems Support for the repair of one unit of an antenna designated as ANTENNA, COMMON AVOI with National Stock Number 7R 5895 014744520 and part number 12-437-13P15. The procurement is conducted under a Foreign Military Sales (FMS) case identified as KU-P-GHR, indicating the item is intended for a foreign government customer. The solicitation, issued under number N0038326PR0R690, was posted on July 20, 2026, with proposals due by August 19, 2026, and is directed exclusively to ROCKWELL COLLINS, INC., the only eligible contractor. The requirement specifies FMS repair status, which exempts the item from Unique Identifier (UID) marking requirements, and incorporates Buy American clauses, though the total contract value is not disclosed. Delivery is to be made FOB origin with performance occurring in Cedar Rapids, Iowa, 52498. The procurement is not subject to any small business set-aside and falls under NAICS code 334290. Offerors not already approved to manufacture the item must submit a Source Approval Request, but the government has explicitly stated it will not delay the procurement should approval be pending. Proposals must be submitted electronically via email to Dina Wojciechowski of NAVSUP WSS N7, and electronic procedures will govern the entire solicitation process. Packaging, inspection criteria, payment details, and formal evaluation factors are not specified in the available documentation, reflecting the pre-solicitation nature of the synopsis.
Other Communications Equipment Manufacturing

POSTED

2 days ago

DEADLINE

in 28 days
View Details
NAICS: 336413
New
Federal
NRP,FLAT PANEL DISPThe contract solicits repair services for the NRP, FLAT PANEL DISP item, identified by NSN 1730-01-628-1418 and part numbers ARD17-LH-001 or 1001408-101, with a quantity of two units. All repairs must comply with strict technical specifications, including adherence to drawing 3429AS4208 Revision NA and applicable repair manuals, and require engineering source approval from Naval Air Systems Command. Only pre-approved vendors are eligible for award, and unapproved offerors must submit comprehensive source approval documentation—including configuration drawings, process sheets, production history, and comparative analysis—by the solicitation deadline. The contract mandates a 125-day repair turnaround time measured from physical receipt at the contractor’s facility, as recorded in the Commercial Asset Visibility system, with a throughput requirement to be specified by the contractor post-award. Induction eligibility expires 365 days after contract award, and repairs beyond this date require bilateral agreement. Repair processes must follow detailed, government-approved procedures with no deviations without formal waiver approval via Form 1694. Critical components, including plating, hardness, and non-destructive testing, require 100% inspection, while other features are subject to AQL sampling per ANSI Z1.4 standards. The contractor must maintain an ISO 9001/SAE AS9100-compliant quality system, implement rigorous parts control, and ensure all materials are new unless specially authorized. Configuration management, calibration standards, and traceability of parts are strictly enforced, and all records must be retained for seven years. Repair efforts deemed Beyond Economical Repair, Missing on Induction, or Over and Above must be documented and approved in writing by DCMA and the Procuring Contracting Officer prior to work initiation. Final inspection requires 14 days’ notice to NAWC Lakehurst and DCMA representatives, who retain authority to reject non-compliant units. Items must be marked per MIL-STD-130, packaged per MIL-STD-2073, and stored in controlled environments. All proposals must be submitted via email to dana.n.knittel.civ@us.navy.mil by August 14, 2026, and must include full source approval data to be considered.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

2 days ago

DEADLINE

in 23 days
View Details
NAICS: 336413
New
Federal
16--VALVE ASSEMBLY,ENVI, IN REPAIR/MODIFICATION OFThis contract pertains to the repair and modification of Valve Assembly, Envi, with National Stock Number 1660-016884617, under solicitation N0038326QNA46, issued by the Naval Supply Systems Command Weapon Systems Support. The contractor is required to overhaul, repair, and test up to seven initial units within a 365-day induction period, extendable by an additional year at the Government’s discretion, with unused induction slots carrying forward. The contract includes options for up to 15 total units over its duration, with separate pricing required for the second year if rates change. The contractor must perform all work at the designated facility in Windsor Locks, Connecticut, using approved technical manuals and drawings, and must comply with strict configuration management, quality assurance, and parts control standards including ISO 9001 and SAE AS9100. The use of MIL-W-81381 wire is prohibited; SAE-AS22759 series wire must be used instead, and all parts must be new unless otherwise approved in writing. Any repairs classified as Beyond Economical Repair, Beyond Repair, Missing on Induction, or Over and Above Repair require prior written concurrence from the Defense Contract Management Agency and final approval from the Procuring Contracting Officer before work may proceed. The contractor is responsible for providing all tooling, test equipment, and facilities necessary to complete the work, with no Government-furnished items unless explicitly stated. Parts cannibalization is strictly prohibited without written approval from NAVSUP WSS and the BDE. The contractor must maintain rigorous documentation of all repair procedures, inspection results, and material certifications, and ensure full traceability of all components. Compliance with Buy American, Equal Opportunity, and Security Prohibition clauses is mandatory, and all personnel performing repair tasks must be certified per IPC/EIAJ-STD-001C. Any deviation from approved specifications, drawings, or repair sources requires prior Government authorization, and unauthorized changes invalidate the work at the contractor’s sole risk. The total contract value is based on the highest proposed unit price multiplied by the maximum allowable units, and pricing must reflect comprehensive cost coverage without relying on replacement values for Beyond Economical Repair determinations. All repairs must result in a Ready for Issue condition, and the contractor must adhere to MIL-STD-2073 packaging standards and secure, climate-controlled storage for all items throughout the lifecycle of the contract.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

2 days ago

DEADLINE

in 26 days
View Details
NAICS: 334111
New
Federal
70--COMPUTER,DIGITAL, IN REPAIR/MODIFICATION OFThis solicitation, issued by the Navy Supply Systems Command Weapon Systems Support (NAVSUP WSS), is a sole-source requirement for the repair and modification of digital computer systems under contract number N0038326RLA89. The contract mandates that all repairs be performed to Return for Issue (RFI) standards using approved manuals and drawings, with strict prohibitions against the use of MIL-W-81381 wire, which must be replaced with SAE-AS22759 series wire. Contractors are responsible for providing all tooling, test equipment, and facilities necessary to complete repairs, as no Government-furnished property will be provided unless explicitly stated. The scope includes overhaul, repair, and potential upgrades of the specified digital computer unit, with detailed procedures governing configuration management, quality assurance, and parts control based on ISO 9001/SAE AS9100 standards. Contractors must adhere to stringent requirements concerning source approval, as only pre-authorized vendors may bid, and submissions lacking the required NAVSUP WSS Source Approval Brochure documentation will be disqualified. All repairs must occur at the designated facility in Saint Louis, Missouri, with any changes to repair processes, facilities, or sourcing requiring written approval from the Procuring Contracting Officer. The contract enforces strict controls over Beyond Economical Repair (BER), Missing on Induction (MOI), and Over and Above Repair (OAR) determinations, all of which require formal DCMA concurrence and Government instruction before proceeding. Purchased materials must be new unless otherwise approved, cannibalization is prohibited without explicit authorization, and all inspection records must be maintained for government audit. Proposals are valid for 120 days, and submissions must be made by August 17, 2026, with all contractual documents deemed issued upon electronic transmission by the Government.
Electronic Computer Manufacturing

POSTED

2 days ago

DEADLINE

in 26 days
View Details
NAICS: 333998
New
Federal
99--DATA DISTRIBUTION S, IN REPAIR/MODIFICATION OFThis contract pertains to the repair, overhaul, and modification of defense-related components under solicitation N0038326QNA45, issued by the Naval Supply Systems Command Weapon Systems Support. The primary focus is on the service and restoration of specific equipment identified by part number 5895-LLZ98S384 and NSN 6m0j3-060000, with all work required to be performed in strict compliance with OEM technical manuals and approved repair procedures. The contractor must operate from a designated facility in Scottsdale, Arizona, and is responsible for providing all necessary tools, materials, and labor unless otherwise specified as Government Furnished Property. Work must result in items being returned to a Ready for Issue condition, with no deviations from approved procedures without formal Government authorization through designated channels. The contract imposes stringent quality, configuration, and compliance requirements, mandating adherence to ISO 9001/SAE AS9100 quality standards and ANSI/NCSL Z540.3 calibration protocols. All repairs are subject to configuration management controls under NAVSUP WSS clause NAVICPIA18, and any changes to drawings, specifications, or repair sources require explicit approval from the Procuring Contracting Officer. The contractor must also navigate complex provisions governing Beyond Economical Repair and Missing on Induction determinations, which require DCMA concurrence and formal Government direction before proceeding. Additionally, the contract enforces Buy American requirements, restrictions on pass-through charges, and security exclusions, while prohibiting unauthorized cannibalization of parts without Navy SUP WSS and Basic Design Engineer approval. The warranty period is one year from delivery, with defects to be corrected within 45 days of discovery, and all work must be conducted under a fully documented quality system with inspection and testing procedures available for Government audit.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

2 days ago

DEADLINE

in 26 days
View Details
NAICS: 336413
New
Federal
NIIN: 012422066/ NOMEN: ACTUATOR,ELECTRO-MECHANICAL,ROTARYThis solicitation seeks a single unit of the electro-mechanical rotary actuator identified by NSN 7R 1680 012422066 for Foreign Military Sales repair purposes, with the requirement exempt from Small Business coordination under updated guidelines. The induction period for the initial unit is 365 calendar days from contract award, with the government retaining the option to extend this period by an additional 365 days, allowing unused time from the first year to roll over into the second. Contractors must submit pricing for up to ten total units over the entire contract period, including the initial unit, and must provide distinct pricing for the second year if costs differ. The government may award the initial order for any quantity up to the maximum, and the total contract value for evaluation purposes is based on the highest proposed unit price multiplied by the full ten-unit maximum. Source approval from the Navy Supply Systems Command is mandatory prior to award, and proposers not already approved must include all documentation specified in the NAVSUP WSS Source Approval Brochure; failure to do so will result in disqualification. The solicitation closes on August 20, 2026, and the award may be issued upon electronic submission or mailing, with contract formation effective upon the government's acceptance of the proposal. All inquiries must be directed to the designated point of contact.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

2 days ago

DEADLINE

in 29 days
View Details