Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Forged Steel Gear Blanks Supply

Active

Federal

Response Deadline11/16/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of raw forged steel gear blanks to prime contractors supporting DLA supply contracts for the Department of Defense, specifically under the DLA Weapons Support LSO Combat Vehicles and Armament. The scope of work requires the forging of high-grade alloy steel into near-net shapes using industrial forging presses, followed by necessary heat treatment to ensure all components meet rigorous military and industrial steel standards. To ensure quality and compliance, the provider must furnish comprehensive material certifications and mill test reports for all delivered components. This procurement falls under NAICS code 332111 and was posted on November 3, 2026, with a response deadline of November 16, 2026.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

NAICS

332111 - Iron and Steel Forging

Place of Performance

TWN

Set-Aside

NONE

Documents

This scope was carved out of SPE7L4-27-T-0758.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

GEAR SET, BEVEL, MATCHED

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 3

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 05:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies raw forged steel blanks for prime contractors on DLA supply contracts. Forges steel to near-net shape, performs heat treatment, and provides material certifications and mill test reports. Utilizes industrial forging presses and high-grade alloy steel to meet military/industrial steel standards for forged components. Delivers forged steel gear blanks.

Similar Contracts

Same NAICS industry code

Titanium Alloy UNS R56400 Round Bar SupplyThis subcontract involves the supply of 52 feet of certified titanium alloy UNS R56400 round bars for prime contractors supporting DLA Troop Support procurement projects. The required materials must be round, drawn, or rolled with a diameter of 0.875 inches and lengths ranging between 10 and 12 feet. All bars must be solution treated and aged in strict accordance with SAE AMS6930G, SAE AMS2809B, and QAP 13873 standards. Managed by the Department of Defense in San Diego, the contract mandates that the supplier maintain a QSLD listing and provide a Certificate of Quality Compliance. Interested parties must respond by November 16, 2026, to fulfill the requirements under NAICS code 332111. Performance for this procurement will take place in San Diego, California.

POSTED

about 11 hours ago

DEADLINE

Alloy Steel Forging SupplyThis subcontract opportunity is for the supply of raw alloy steel forging blanks to support prime contractors under the DLA Weapons Support Land Supply Chain. The selected provider must source alloy steel that meets the specific metallurgical requirements for NSN 2540-01-500-0309 and provide Mill Test Reports to certify compliance. All delivered materials must strictly adhere to the Buy American Act and the Berry Amendment. The project is designated as a Total Small Business Set-Aside under NAICS code 332111, with performance taking place in Texarkana, Texas. Interested parties must submit their responses by November 16, 2026, to support the Department of Defense agency.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 11 hours ago

DEADLINE

ANGLE, STRUCTURAL

Solicitation # SPE7M2-27-T-0700

Solicitation SPE7M2-27-T-000 is a small business set-aside for the procurement of 357 feet of structural angles, identified by NSN 9520010239272. The material must be hot rolled steel, Grade AH-36, conforming to MIL-S-22698 and ASTM-A6 Table A2.7 for equal leg L-shapes, with a 0.250 inch flange thickness and 4.000 inches overall width and height. The items must be produced by an approved steel mill and comply with American Bureau of Shipping rules. Delivery is required within 160 days after receipt of order, with a need ship date of April 26, 2027, and a final required delivery date of June 25, 2027. Shipping is FOB Origin to DLA Distribution Warner Robins in Georgia. Eligibility for award is restricted to suppliers listed on the Qualified Suppliers List for Distributors (QSLD) for FSGs 95 and 96. The contract mandates strict marking and packaging requirements, including compliance with MIL-STD-129, MIL-STD-2073-1E, and ASTM A700, with specific requirements for marking each foot of material and identifying secured lifts on each end. Inspection and acceptance will occur at the destination. Payment shall be processed electronically via the Wide Area WorkFlow (WAWF) system. The procurement also incorporates various FAR and DFARS clauses regarding cybersecurity, domestic sourcing under the Buy American Act, and the prohibition of intentionally added mercury.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE8E4-27-T-0212

Solicitation SPE8E4-27-T-0212 is a small business set-aside request for quotations for the procurement of 27 feet of 4140 steel composite metal bar. The material must be hot rolled, flat, and annealed, with a thickness of 1.000 inch, a width of 6.000 inches, and lengths between 8 and 12 feet in whole foot increments. The product must adhere to SAE AMS6382S and SAE AMS2806 standards. Delivery is required by February 22, 2027, with a need ship date of April 26, 2027, to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract is FOB Origin, and inspection and acceptance will occur at the destination. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). A Certificate of Quality Compliance (Mill-Material Certification) is mandatory for every shipment. Strict marking and packaging requirements apply, including compliance with MIL-STD-129 and MIL-STD-2073-1E, with specific mandates for continuous identification markings and waterproof stenciling or stamping. Failure to comply with these marking requirements is grounds for product rejection. The procurement also incorporates the Buy American Act, the Berry Amendment, and requires the use of the Wide Area WorkFlow (WAWF) system for invoicing and receiving reports.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE8E9-27-T-0447

Solicitation SPE8E9-27-T-0447 is a small business set-aside procurement issued by DLA Troop Support for the supply of 136 feet of metal bar, identified by NSN 9510005004702. The material must be supplied in whole feet lengths only, specifically 10, 11, or 12 feet, and must comply with SAE AMS5659T and AMS2806 standards. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD) for FSGs 95 and 96. The delivery is set for 160 days after order, with a required delivery date of February 9, 2027, and a need ship date of April 26, 2027. The shipment is FOB Origin and will be delivered to the DLA Distribution Depot at Tinker AFB, Oklahoma. Strict quality and marking requirements are mandated, including the provision of a Certificate of Quality Compliance (Mill-Material Certification) with every shipment. Continuous identification markings are required on each unit, including the contract delivery order number, NSN, specification details, manufacturer information, and dimensions. Marking must be performed via stamping or stenciling, though adhesive labels are required for bars under 0.250 inches in nominal OD. Packaging and preservation must adhere to MIL-STD-2073-1E, MIL-STD-163, and ASTM A700. Inspection and acceptance will occur at the destination. Invoicing and payment are to be processed electronically through the Wide Area WorkFlow (WAWF) system.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE8E4-27-T-0215

Solicitation SPE8E4-27-T-0215 is a request for quotations for the procurement of 43 feet of Steel Comp 630 metal bar, specifically hot rolled, round, and centerless ground with a 4.000 inch diameter and a reference weight of 48.06 lb/ft. This critical application item must comply with SAE AMS5643W Revision W and be delivered to the DLA Distribution Depot Oklahoma at Tinker AFB. The procurement requires a Certificate of Quality Compliance (Mill-Material Certification) with every shipment and mandates strict continuous identification markings on each unit of issue, including the contract delivery order number, NSN, and manufacturer details. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD) for FSGs 95 and 96. The contract incorporates various federal regulations, including the Buy American Act and the Berry Amendment, and requires the use of the Wide Area WorkFlow (WAWF) system for invoicing. Packaging and preservation must adhere to ASTM A700 and MIL-STD-2073-1E, with marking following MIL-STD-129. Inspection and acceptance will take place at the destination. Quotations are due by November 16, 2026, via the DLA Internet Bid Board System (DIBBS), with a required delivery date of February 2, 2027.

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE8E4-27-T-0225

Solicitation SPE8E4-27-T-0225 is a small business set-aside request for the procurement of 56 feet of metal bar, specifically Steel Comp 4130, cold drawn, flat, and annealed. The material must measure 1.250 inches wide by 0.500 inches thick, with lengths provided in whole feet between 10 and 12 feet. Delivery is required within 160 days, with a need ship date of April 26, 2027, and a quantity variance of plus or minus 10 percent is permitted. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Compliance with the Qualified Suppliers List for Manufacturers and Distributors (QSLM/QSLD) is mandatory, and a Certificate of Quality Compliance (Mill-Material Certification) must accompany every shipment. Strict marking and packaging requirements apply, including adherence to MIL-STD-129, ASTM A700, and RP001, with specific continuous identification markings required on each unit of issue. Inspection and acceptance will occur at the destination. The procurement incorporates various FAR and DFARS clauses, including those for HUBZone price evaluation preference, the Buy American Act, and safeguarding covered defense information. Quotations are to be submitted via DIBBS by November 16, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE8E4-27-T-0219

Solicitation SPE8E4-27-T-0219 is for the procurement of 83 feet of annealed, cold-finished hexagonal steel bar (Steel Comp 303) with a width of 0.875 inches across flats and lengths between 10 and 12 feet. The material must comply with ASTM A582/A582M and SAE AMS2806 Revision D standards. Delivery is required within 160 days, with an original required delivery date of February 13, 2027, and a need ship date of April 26, 2027. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. A quantity variance of plus or minus 10 percent is permitted. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD). The contractor must provide a Certificate of Quality Compliance (Mill-Material Certification) with every shipment and forward a copy to the DLA Troop Support Contracting Officer. Strict marking and packaging requirements apply, including adherence to MIL-STD-129, ASTM A700, and RP001. Continuous identification markings, including the contract delivery order number, NSN, and manufacturer details, are mandatory; failure to comply with these marking methods will result in the rejection of the product. Inspection and acceptance will take place at the destination. The contract incorporates various FAR and DFARS clauses, including the Buy American Act, Berry Amendment, and NIST SP 800-171 cybersecurity requirements.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE8E4-27-T-0224

Solicitation SPE8E4-27-T-0224 is a small business set-aside request for quotations issued by DLA Troop Support for the procurement of 51 feet of annealed round steel composite 4130 metal bar. The material must have a diameter of 3.000 inches and be supplied in whole feet lengths between 6 and 20 feet, with a reference weight of 24.033 lb/ft. The requirement is designated as NSN 9510-00-529-7315 and is subject to a quantity variance of plus or minus 10 percent. Delivery is required by April 20, 2027, with a need ship date of April 26, 2027, delivered FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. Compliance with the Qualified Suppliers List for Distributors (QSLD) is mandatory for eligibility, and a Certificate of Quality Compliance (Mill-Material Certification) must accompany every shipment. Strict marking and packaging standards apply, including adherence to MIL-STD-129 and ASTM A700, with specific requirements for continuous identification markings such as the contract delivery order number, NSN, and manufacturer details. The procurement incorporates various FAR and DFARS clauses, including the Buy American Act, HUBZone price evaluation preferences, and safeguarding of covered defense information. Inspection and acceptance will occur at the destination, and invoicing must be processed through the Wide Area WorkFlow (WAWF) system.

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE8E9-27-T-0422

This solicitation, SPE8E9-27-T-0422, is a small business set-aside request for quotations issued by DLA Troop Support for the procurement of 245 feet of round, annealed steel CRES metal bar. The material must have a nominal outside diameter of 0.875 inches, a weight of 2.044 pounds per linear foot, and individual lengths between 10 and 12 feet. The procurement adheres to material standards SAE AS4340, SAE AMS2806, and SAE AMS6415V. A critical requirement for this award is that only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) for FSGs 95 and 96 are eligible. Delivery is required within 160 days after the award, with a target ship date of April 26, 2027, and an original required delivery date of March 1, 2027. The shipment is FOB Origin and will be delivered to the DLA Distribution Depot Oklahoma at Tinker AFB. A Certificate of Quality Compliance (Mill-Material Certification) must accompany every shipment. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-163, with specific preservation and packing codes ZZ and Z as defined by ASTM A700. Inspection and acceptance will occur at the destination. Payment processing is required through the Wide Area WorkFlow (WAWF) system.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE8E4-27-T-0221

Solicitation SPE8E4-27-T-0221 is a small business set-aside for the procurement of 2,926 feet of cold drawn round metal bars, specifically steel composition 1018/1020 with a 0.500 inch diameter and lengths between 10 and 12 feet. The material must be supplied in whole feet only. This is a critical application item requiring compliance with ASTM A108, ASTM A29/A29M-20, ASTM A700-14, and SAE AMS2806. A Certificate of Quality Compliance (Mill-Material Certification) is mandatory for every shipment. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award, and the contract includes a price evaluation preference for certified HUBZone small business concerns. The delivery is scheduled for April 2027 with a 160-day delivery window, shipping FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination. Strict marking and packaging requirements apply, including compliance with MIL-STD-129 and ASTM A700 for preservation and packing. Each unit must feature continuous identification markings, including the DLA contract delivery order number, NSN, and manufacturer details; failure to comply with these marking standards is grounds for product rejection. Invoicing must be processed through the Wide Area WorkFlow (WAWF) system. The procurement also adheres to the Buy American and Balance of Payments Program and requires compliance with DFARS cybersecurity and telecommunications restrictions.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE8E4-27-T-0218

Solicitation SPE8E4-27-T-0218 is a small business set-aside for the procurement of 43 feet of hot finish flat metal bar made of Steel Comp XM-13, identified by NSN 9510-00-448-1394. The required material must be 3.000 inches wide and 0.500 inches thick, with lengths provided in whole feet between 10 and 12 feet. This is a critical application item requiring a Certificate of Quality Compliance (Mill-Material Certification) and adherence to technical standards including SAE AMS5629, ASTM A700-14, and SAE AMS2806. Delivery is required within 160 days ADO, with terms set as FOB Origin and inspection and acceptance occurring at the destination. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD) for FSGs 95 and 96. Packaging and preservation must comply with MIL-STD-2073-1E, ASTM A700, and DLA packaging requirement RP001. Marking must follow MIL-STD-129 and include specific continuous identification such as the contract delivery order number, NSN, and manufacturer's heat and lot number, using stamping or stenciling. Invoicing and receiving reports must be processed electronically through Wide Area WorkFlow (WAWF). The procurement also incorporates various FAR and DFARS clauses regarding cybersecurity, domestic sourcing, and the prohibition of covered defense telecommunications equipment.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 11 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

Same awarding agency

Groove Pulley Supplier (NSN 3020-01-647-9009)This subcontract involves the supply of one Groove Pulley, part number SPZ-100X3/1610, for prime contractors supporting DLA Weapons Support projects. The hardware must strictly adhere to NSN 3020-01-647-9009 specifications and comply with the Buy American Act as well as the DLA Master List of Technical and Quality Requirements. Packaging must be completed using heat-sealed barrier bags in accordance with MIL-STD-2073-1E and MIL-STD-129 standards. The final product is to be delivered FOB Destination to the USS MARINETTE (LCS 25). This requirement is managed by the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament, falling under NAICS code 332510. The response deadline for this opportunity is November 16, 2026.

Hardware Manufacturing

POSTED

about 11 hours ago

DEADLINE

Supply of Accessories Stowage Box (NSN 2540016991929)This subcontract involves the procurement and delivery of one Commercial Off-The-Shelf accessories stowage box, specifically part number CSD242416 from Hoffman Engineering Co. with NSN 2540016991929. The hardware is intended for primes delivering DLA supply contracts to the USS INDIANAPOLIS LCS 17. The contract is managed by the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament. The supplier must ensure all packaging and marking adhere to MIL-STD-2073-1E and MIL-STD-129 standards and maintain full compliance with the Buy American Act. Delivery of the item is required FOB Destination to FPO 34087. The response deadline for this requirement is November 16, 2026.

Industrial Supplies Merchant Wholesalers

POSTED

about 11 hours ago

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract for Military-Grade Packaging and Marking Services supports prime contractors on DLA Weapons Support LSO Combat Vehicles and Armament projects. The scope of work involves providing specialized packaging, packing, and labeling for non-hazardous materials. All activities must adhere to strict military and industry standards, specifically ASTM D3951 for packaging and MIL-STD-129 for marking and labeling, utilizing approved MIL-SPEC materials and industrial labeling systems. The final deliverables consist of properly processed shipments ready for transport to New Cumberland, Pennsylvania. This opportunity falls under NAICS code 488510 and is managed through the Department of Defense. Interested parties should note the response deadline of November 13, 2026.

Freight Transportation Arrangement

POSTED

about 11 hours ago

DEADLINE

Precision Machining and Fabrication of Access Door HingesThis subcontract involves the precision machining and fabrication of five custom access door hinges for the DLA Weapons Support LSO Combat Vehicles and Armament. The contractor is required to manufacture the components according to drawings 78286 SS3995 (Rev 01) and 78286 SS9209 (Rev B) using CNC machining, with a strict prohibition on the use of additive manufacturing. The final deliverables are identified by NSN 5340-01-623-8601. To be eligible, the provider must maintain an ISO 9001:2015 quality system and hold US/Canada Joint Certification Program certification. The project falls under NAICS code 332710 and will be performed in New Cumberland. Interested parties must respond by November 13, 2026.

POSTED

about 11 hours ago

DEADLINE

Supply of Groove PulleyThis subcontract involves the procurement of one Groove Pulley for prime contractors supporting DLA Weapons Support supply contracts. The selected provider is responsible for sourcing or manufacturing a pulley that strictly adheres to the technical specifications of NSN 3020011502226, as well as handling the packaging and delivery of the item to a designated government facility in San Diego. To be eligible, contractors must possess a valid UEI and CAGE code and ensure full compliance with restrictions regarding covered defense telecommunications equipment. The opportunity was posted on November 3, 2026, with a response deadline of November 16, 2026, under NAICS code 333249 for the Department of Defense.

Other Industrial Machinery Manufacturing

POSTED

about 11 hours ago

DEADLINE

Supply of Reinforced Vinyl and Mylar Backing MaterialsThis subcontract involves the supply of reinforced vinyl, mylar, and fiberglass materials to prime contractors supporting DLA Weapons Support combat vehicle components. All provided materials must strictly adhere to Drawing NR 19207 12340823 specifications and be certified free of Class I Ozone Depleting Chemicals. Shipments consist of raw materials intended for panel production and must be packaged according to ASTM D3951 or TQ requirement IP025. The contract is managed under the Department of Defense for the DLA Weapons Support LSO Combat Vehicles and Armament, with performance taking place in New Cumberland. The solicitation was posted on November 3, 2026, with a response deadline of November 16, 2026. The procurement falls under NAICS code 326112.

Plastics Packaging Film and Sheet (including Laminated) Manufacturing

POSTED

about 11 hours ago

DEADLINE

Fabrication of Fiberglass Vehicular Insulation PanelsThis subcontract involves the fabrication of 129 fiberglass insulation panels for prime contractors supporting DLA Weapons Support combat vehicle components. The work requires cutting and forming panels according to Basic Drawing NR 19207 12340823 Rev D, utilizing reinforced vinyl and mylar backing. Strict adherence to environmental and quality standards is mandatory, specifically the total prohibition of Class I Ozone Depleting Chemicals and the performance of quality inspections following MIL-STD-105/ASQ Z1.4. The project is managed under the Department of Defense for the DLA Weapons Support LSO Combat Vehicles and Armament, with performance located in New Cumberland. Eligible contractors must hold US/Canada Joint Certification Program certification. The solicitation was posted on November 3, 2026, with a response deadline of November 16, 2026.

All Other Plastics Product Manufacturing

POSTED

about 11 hours ago

DEADLINE

Manufacturing of Upper Booster ShaftsThis subcontract involves the manufacture and supply of six Upper Booster Shafts, identified as Part 7018963543, for the Department of Defense under the DLA Weapons Support combat vehicle and armament projects. The scope of work requires precision CNC machining and fabrication conducted in strict accordance with provided technical specifications. The contractor is responsible for ensuring all containers are marked and labeled according to MIL-STD 129 and the 29 CFR 1910.1200 Hazard Communication Standard. Performance of the contract will take place at Hunter AAF, and the project falls under NAICS code 332710.

POSTED

about 11 hours ago

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract opportunity is for the provision of military-grade packaging and marking services supporting prime contractors for the DLA Weapons Support LSO Combat Vehicles and Armament projects. The selected provider will be responsible for packing items according to MIL-STD-2073-1E standards, specifically utilizing Preservation Method 10, Packing Code A, Level B, and ensuring all markings comply with MIL-STD-129 and RP001 DLA requirements. The final deliverable consists of finished gears that are fully packed and marked for shipment. The project is designated as a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 488410 for the Department of Defense. Interested parties must submit their responses by November 18, 2026.

Motor Vehicle Towing

POSTED

about 11 hours ago

DEADLINE

Specialty Metal Material SupplyThis subcontract opportunity is for the supply of raw specialty metal stock to support prime contractors working on DLA Weapons Support LSO Combat Vehicles and Armament projects. The selected provider will be responsible for sourcing metal alloys that strictly adhere to technical drawing specifications and delivering certified raw material stock. A critical requirement of the contract is the provision of Mill Test Reports to ensure full compliance with DFARS 252.225-7008, 252.225-7009, and 252.225-7010 regulations. The procurement is categorized under NAICS code 331210 and is specifically set aside for Service-Disabled Veteran-Owned Small Businesses. Managed by the Department of Defense, the solicitation was posted on November 3, 2026, with a response deadline of November 18, 2026.

Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 11 hours ago

DEADLINE

Precision Spur Gear Fabrication (NSN 3020-01-579-4032)This subcontract opportunity is for the precision fabrication of spur gears under NSN 3020-01-579-4032 to support DLA Weapons Support LSO Combat Vehicles and Armament projects. The selected contractor will be responsible for the precision cutting and grinding of 31 gears, ensuring all finished products are fully inspected and delivered. This effort is specifically set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 333612. Compliance requirements are stringent, necessitating the implementation of SAE AS9003 or ISO 9001 quality systems and adherence to MIL-STD-1916 sampling standards. Due to the handling of export-controlled data, the contractor must maintain CMMC Level 2 and US/Canada JCP certifications. The solicitation was posted on November 3, 2026, with a response deadline of November 18, 2026.

Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 11 hours ago

DEADLINE

Supply of Elevation Stops (NSN 1005015334091)This subcontract involves the manufacture or procurement of two elevation stops, part number DGMT0014 and NSN 1005015334091, for prime contractors supporting the DLA Weapons Support LSO Combat Vehicles and Armament projects. All deliverables must strictly adhere to the Master List of Technical and Quality Requirements as well as DLA Packaging Requirements RP001. Performance for this contract is designated for Hunter AAF. To be eligible, the provider must maintain ITAR registration with the DDTC and ensure full compliance with DFARS 252.204-7012. Additionally, a CMMC Level 2 self-assessment is required. The solicitation was posted on November 3, 2026, with a response deadline of November 16, 2026, under NAICS code 332994.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 11 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Solicitation # SPE8E9-27-T-0452

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE8E4-27-T-0226

DDSP NEW CUMBERLAND FACILITY

POSTED

about 11 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS