Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on July 7, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

FSW26 SIGNAL AND SPECTRUM ANALYZER

Closed
N0016426Q0220Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334515
New
Federal
CMC 500 Essential package
Solicitation # PR504231
Oak Ridge National Laboratory, managed by UT-Battelle, LLC for the Department of Energy, is soliciting firm fixed price quotes for the procurement of two CMC 500 Essential packages and associated components from Omicron Electronics Corporation. The required equipment includes software modules for overcurrent, differential, and pulse ramping, wiring accessory packages, wireless adapters with antennas, transport cases, and three-phase generator cables. This is a combined procurement under NAICS code 334515, and the award will be granted to the lowest priced, technically acceptable proposal. To be eligible, the seller must be an authorized reseller of the products. Proposals are due by November 4, 2026, at 5:00 PM EST and must be submitted via email to the procurement officer. The submission must include a firm fixed price quote, a proposed delivery schedule, and completed abbreviated representations and certifications. The contract incorporates various Federal Acquisition Regulation clauses, including Brand Name or Equal and the Buy American Act. Compliance with cybersecurity standards derived from DOE OERL 205 I D and NIST SP 800-161 is required. Additionally, any personnel delivering items to the Oak Ridge, Tennessee site must be United States citizens or foreign nationals registered in the Foreign Access Central Tracking System.
Ornl Ut-Battelle Llc-Doe Contractor

POSTED

about 9 hours ago

DEADLINE

in 7 days
NAICS: 334515
New
Federal
4 Series Mixed Signal Oscilloscope (MSO44B)
Solicitation # 80NSSC27941006Q
NASA/NSSC is seeking capability statements for the acquisition of a Tektronix MSO44B 4 Series Mixed Signal Oscilloscope and associated accessories to support embedded hardware bring-up, board-level debug, and signal integrity analysis at the NASA Ames Research Center in California. The required equipment must feature four analog input channels, 1 GHz bandwidth, a minimum record length of 31.25 M points per channel, and a perpetual, node-locked ultimate software bundle for advanced analysis. Additional requirements include an 8-channel logic probe, various specialized voltage and current probes using a common interface, a hard transit case, and a five-year calibration service with traceable certification. The government intends to issue a sole source contract to Tektronix under FAR 12.102(a), as they have been determined to be the sole provider of this specific oscilloscope. This procurement is being conducted as an acquisition of commercial items under FAR Part 12, and NASA FAR Supplement Clause 1852.215-84 regarding the Ombudsman is applicable. Interested vendors must submit written capability statements by October 30, 2026, referencing the notice ID. These statements will be used solely to determine if the procurement will be conducted on a competitive basis; formal quotes will not be evaluated at this stage.
National Aeronautics And Space Administration

POSTED

about 9 hours ago

DEADLINE

in 2 days
NAICS: 334515
New
Federal
UH-60L/M Operational Test Program Sets
Solicitation # W912LA27QA002
The California Army National Guard Medical Readiness Detachment is issuing a Sources Sought notice under solicitation number W912LA27QA002 to identify potential vendors capable of providing Military UH-60L/M Black Hawk specific Operational Test Program Sets. This action is a request for information and not a formal solicitation. The primary objective is to procure equipment to test various aircraft electrical components and systems, which is critical for ensuring flight safety and maximizing aircraft readiness. The required items include four specific test program sets: P/N 991-000-00139-02 for Right-Hand Relay Panels, P/N 991-OTP-00014-02 for Blade De-Ice Distributors, P/N 991-OTP-00119-01 for BDI system control panels, and P/N 991-OTP-00120-01 for Left-Hand relay panels. Each set must include test program software on CD-ROM, test adapter cables in storage bags within rugged cases, and applicable test interface assemblies. The place of delivery for these items is 5168 E Dakota Ave, Fresno, California. Interested sources must submit their response, including vendor name, business size, unique entity ID, and a capability statement, to Mr. Manuel Jimenez via email by November 10, 2026. The procurement falls under NAICS code 334515 and currently has no designated set-aside. Because this is a market research effort, specific evaluation factors, contract values, and formal award criteria have not yet been established.
W7MX Uspfo Activity Ca Arng

POSTED

about 9 hours ago

DEADLINE

in 13 days
NAICS: 334515
New
DIBBS
TEST BENCH, DIGITAL,
Solicitation # SPE7M1-27-U-0794
Solicitation SPE7M1-27-U-0794 is a Total Small Business Set-Aside issued by the DLA Weapons Support Maritime Supply Chain for the procurement of digital test benches, specifically Fluke Corp part number 1550C (NSN 6625-01-588-7039). This is a unilateral Simplified Indefinite-Delivery Contract (SIDC) with a maximum value of 350,000.00 USD for a one-year period. The estimated annual quantity is 28 units, with a guaranteed contract minimum of 4 units and a minimum delivery order quantity of 3 units. Delivery is required within 83 days after order, with FOB Origin terms and inspection and acceptance occurring at the destination. The items are identified as Commercial Off-The-Shelf (COTS) and are designated as critical application items. Compliance with several technical and quality standards is mandatory, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and DLA packaging requirements RP001. The contract strictly prohibits the intentional addition of mercury, except in specific functional components, and requires adherence to the Hazard Communication Standard for any hazardous materials. Additionally, the contractor must comply with the Buy American and Balance of Payments Program, CMMC Level 2 self-assessment requirements, and Covered Defense Information protocols. Invoicing and payment are processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 2 days

AI Contract Overview

Show more

The U.S. Navy’s Naval Surface Warfare Center Crane is soliciting a sole-source contract for an FSW26 Signal and Spectrum Analyzer under NAICS code 334515, with the requirement exclusively directed to Rohde & Schwarz USA, Inc. due to their proprietary ownership of the equipment’s specifications and data. The analyzer must include an OCXO for precision frequency stability, a spare SSD, an RF preamplifier, an extension to 8 GB IQ memory, specialized software for pulse measurement and AM/FM/PM modulation, a transient measurement application, a real-time spectrum analyzer with an 800 MHz bandwidth, and a signal analysis bandwidth of up to 2 GHz, accompanied by an accredited calibration certificate. The solicitation is being executed under FAR Part 12 procedures with no set-aside, and while other vendors may submit capability statements, the government retains full discretion to proceed without competition. All offerors must be registered in the System for Award Management, and proposals must be emailed to Jaclyn M. Bailey at [email hidden] no later than 2:00 PM Eastern Time on July 15, 2026. Any amendments to the solicitation will be posted exclusively on sam.gov, and it is the vendor’s responsibility to monitor the site for updates. The contract opportunity was posted on July 7, 2026, and performance will be at Crane, Indiana, with no alternative procurement route anticipated absent extraordinary circumstances.

General Info

Sole-source contract to Rohde & Schwarz for FSW26 analyzer with 2 GHz bandwidth, OCXO, and specialized software, due July 15, 2026.

NAICS

334515 - Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

Place of Performance

Crane, IN, 47522, USA

Set-Aside

NONE

Documents

3

Memorandum to Restrict Competition for FSW26 Signal and Spectrum Analyzer

PDF, High priority: read this firstjustification-and-authorization
High

N00164-26-Q-0220 Sole Source Synopsis for FSW26 Signal and Spectrum Analyzer

PDF, High priority: read this firstsources-sought
High

Solicitation N0016426Q0220 for FSW26 Signal and Spectrum Analyzer

PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Combined Synopsis

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Nswc Crane
Contacts1 person available
OfficeCRANE, IN, 47522-5001, USA
Office AddressCRANE, IN, 47522-5001, USA
Contacts
Jaclyn Bailey

Full Description

Show more

N00164-26-Q-0220 – SOLE SOURCE -FSW26 SIGNAL AND SPECTRUM ANALYZER– FSG 6625 - NAICS 334515 ISSUE DATE 07 JUL 2026 – CLOSING DATE 15 JUL 2026 – 2:00 PM Eastern Time 



ITEM DESCRIPTION- Naval Surface Warfare Center (NSWC) Crane has a requirement for FSW26 Signal and Spectrum Analyzer to include OCXO, precision frequency, Spare SSD, RF preamplifier, Extension to 8 GB IQ Memory, Software, Pulse measurement application, AM/FM/PM Modulation, Transient Measurement Application, Real-time spectrum analyzer 800 MHz; signal analysis bandwidth 2 GHz, and Accredited Calibration Certificate. 



The proposed contract action is for the supplies or services for which the Government intends to solicit and negotiate with one source, ROHDE & SCHWARZ USA,INC. under the authority of FAR 12. This is being sole sourced because the vendor holds all proprietary data and specifications of the equipment. All responsible sources may submit a capability statement, which shall be considered by the agency. However, a determination by the Government not to compete with this proposed contract based upon responses to this solicitation is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement.



Contractors must be properly registered in the System for Award Management (SAM). Offerors may obtain information on SAM registration and annual confirmation requirements by calling +1 (555) 000-0000 or via the internet at https://sam.gov.



This solicitation is being issued pursuant to the procedures at FAR Part 12.  Synopsis exception FAR 5.202(a)(13) applies and Solicitation Number N00164-26-Q-0220 is hereby issued as an attachment hereto.   



Contract Opportunities on https://sam.gov/ has officially replaced FBO.gov 



All changes to the requirement that occur prior to the closing date will be posted to Contract Opportunities on https://sam.gov/.  It is the responsibility of interested vendors to monitor https://sam.gov/ for any amendments, which may be issued to this solicitation.   
For changes made after the closing date, only those offerors that provide a quote will be provided any changes/amendments and considered for future discussions and/or award. 



Offers shall be e-mailed to contact@example.gov.    All required information must be received on or before 15 JUL 2026 2:00 PM EASTERN TIME.  

More opportunities from Department Of Defense → Nswc Crane

Same awarding agency

NAICS: 336510
New
Federal
N0016426RGW20-PROCUREMENT OF DESIGN AND PRODUCTION OF FLAT RAILCARS-PSC 2220- NAICS 336510
Solicitation # N0016426RGW20
Solicitation N0016426RGW20, issued by the NSWC Crane Warfare Center, is an IDIQ contract for the design, testing, and production of NSWC AIM Flatcars. The project has a contract maximum quantity of nine railcars, which must be fully commissioned and approved for rail use by the Association of American Railroads (AAR) in accordance with AAR-M1001 Section C, Part II. Key technical specifications include a lightweight car requirement of 116,000 pounds, truck axle loads not exceeding 60,000 pounds per axle, and adherence to WS20972 and MIL-SPC-810 for load securement. The period of performance is structured over five years from the date of award, with delivery costs to be evaluated across three Strategic Weapons Facility locations. The procurement process has undergone seven amendments, resulting in several extensions of the proposal deadline, with the final closing date set for November 25, 2026, at 2:00 PM EST. Significant modifications include updates to the Statement of Work, a reduction in the number of Contract Data Requirement Lists (CDRLs), and revisions to the System Requirements Document to adjust shipping weights and strikedown loads. The government will evaluate proposals based on delivery pricing and past performance on related railcar design and manufacture contracts, including commercial and non-federal experience. Government Furnished Property, including Active Inert Missiles and shipping fixtures, is designated for support with delivery dates targeted for September 20, 2027.
Railroad Rolling Stock Manufacturing

POSTED

2 days ago

DEADLINE

in 28 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS