This Solicitation opportunity from New York was posted on April 17, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Furnish Air1 Helicopter Engine Overhaul

Closed

BID0011216State & Local

Submission Closed05/01/2025

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 488190

New

DIBBS

DLA Compliant Packaging and ShippingThis subcontract for DLA Compliant Packaging and Shipping involves providing specialized packaging and transport services for prime contractors fulfilling DLA supply contracts. The scope of work requires packaging units in strict accordance with RP001 DLA Packaging Requirements for Procurement, specifically mandating the use of non-plastic wrapping, cushioning, and dunnage. Additionally, the contractor is responsible for applying Hazard Warning Labels to hazardous materials as per DFARS 252.223-7001 and ensuring all units are delivered properly packaged and labeled to their final destination. The project is managed under the Department of Defense through DLA DIST SAN JOAQUIN, with the place of performance located in Tracy, California. The solicitation was posted on November 11, 2026, with a response deadline of November 23, 2026. This opportunity falls under NAICS code 488190, focusing on the logistics and delivery of compliant materials.

POSTED

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on projects for the Department of Defense DLA Weapons Support ASC Commodities Division. The scope of work involves providing specialized military-grade packaging, marking, and labeling services. Specifically, the contractor must execute packaging according to MIL-STD-2073-1E Preservation Method 31, shipment markings per MIL-STD-129, and item surface markings per MIL-STD-130N using industrial equipment and MIL-SPEC materials. The final deliverables consist of fully packaged and marked shipments prepared for First Destination Transportation to DLA Distribution in New Cumberland, Pennsylvania. This opportunity falls under NAICS code 488190, with a response deadline of November 19, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Military-Grade Packaging and Freight ServicesThis subcontract for Military-Grade Packaging and Freight Services supports prime contractors on DLA supply contracts through the Department of Defense. The service provider is responsible for specialized packaging, palletizing, and marking shipments in strict accordance with ASTM D3951, RP001, and MIL-STD-129 standards. To ensure full compliance with the DLA Master List of Technical and Quality Requirements, the contractor must utilize MIL-SPEC materials and specialized palletization equipment. The scope of work requires the delivery of properly packaged and labeled shipments to the destination within a 20-day window. Performance will take place in Fort Carson, Colorado, under NAICS code 488190. Interested parties must respond by November 23, 2026, to provide these essential logistics services for the DLA Weapons Support Land Supply Chain.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract for MIL-SPEC Packaging and Palletization Services supports prime contractors on DLA aerospace supply contracts. The scope of work involves providing specialized packaging and labeling services that strictly adhere to MIL-STD-129 and RP001 DLA Packaging Requirements for Procurement. The service provider is required to utilize MIL-SPEC materials and DLA-compliant equipment to ensure all shipments are properly palletized and ready for First Destination Transportation. The contract is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place in New Cumberland. Identified by NAICS code 488190, the opportunity was posted on November 11, 2026, with a response deadline of November 19, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Aerospace Component Packaging and Shipping

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Military-Grade Packaging and Freight Services

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPEFA5-27-T-0201

Solicitation SPEFA5-27-T-0201 is a request for the procurement of five clips, identified by NSN 1560LLNC17221 and part number 65211-09025-105 from Sikorsky Aircraft Corporation. Issued by the DLA Aviation at Cherry Point, NC, Fleet Readiness Center East, the requirement specifies a delivery timeline of six days after order, with a final required delivery date of November 26, 2026. The contract is established as FOB Destination, with both inspection and acceptance occurring at the destination point in Cherry Point, NC. The contractor must adhere to strict quality and packaging standards, including ASTM D3951 and MIL-STD-129 for marking and labeling, while following RP001 for palletization. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Administrative requirements include the use of the Wide Area Workflow (WAWF) system for electronic invoicing and payment. Furthermore, the solicitation incorporates various FAR and DFARS clauses regarding cybersecurity reporting, the Buy American Act, and prohibitions on covered defense telecommunications equipment. All quotes must be submitted via the DIBBS portal by November 19, 2026.

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

AMS5537 .063X12"X24" L

Solicitation # SPEFA3-27-T-0044

Solicitation SPEFA3-27-T-0044 is for the procurement of two cobalt sheets with dimensions of .063" x 12" x 24" and alloy/temper L605, in accordance with SAE AMS5537K Revision K. The material is identified by NSN 9515-LN-003-4325 and is required for delivery to the Fleet Readiness Center Southeast in Jacksonville, Florida, by November 10, 2026. The contract specifies FOB Destination for both inspection and acceptance. Technical requirements include strict adherence to Reference QAP 13873 and the submission of metal certifications via CDRL-METALSCERT-26033. Sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-non-conformance requirement for acceptance under MIL-STD-105/ASQ Z1.4. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must adhere to MIL-STD-129 and MIL-STD-130N(1). Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with DFARS clauses regarding the Buy American program, cybersecurity safeguarding, and the prohibition of covered defense telecommunications equipment.

DLA FLEET READINESS CENTER SOUTHEAST

POSTED

DEADLINE

Solicitation # SPEFA5-27-T-0203

Solicitation SPEFA5-27-T-0203 is a federal procurement issued by the Defense Logistics Agency (DLA) for the supply of three units of an item described as ANGLE, identified by NSN 1560LLNCB4202. The procurement is managed by the DLA Aviation office at Cherry Point, North Carolina, with a required delivery date of December 8, 2026. The contract specifies a delivery timeframe of 11 days after order, with FOB and inspection/acceptance points set to destination. The material has no shelf life requirement and must be packaged according to ASTM D3951 and RP001, with marking and labeling adhering to MIL-STD-129 and MIL-STD-130N(1). Quality assurance requires sampling in accordance with MIL-STD-1916 or ASQ H1331, with specific verification levels for critical, major, and minor attributes. The contract incorporates various FAR and DFARS clauses, including strict cybersecurity requirements under DFARS 252.204-7012 and prohibitions on covered defense telecommunications equipment. Payment and invoicing must be processed electronically through the Wide Area WorkFlow (WAWF) system. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS) by November 19, 2026.

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

AMS5540 .063X12"X24"IN

Solicitation # SPEFA3-27-T-0043

Solicitation SPEFA3-27-T-0043 is a fixed-price request for quotations issued by DLA Aviation in Jacksonville, Florida, for the procurement of two sheets of Inconel 600 Nickel Sheet. The material must adhere to specification SAE AMS5540R with dimensions of .063 inches by 12 inches by 24 inches. Key quality and technical requirements include compliance with Reference QAP 13873 and CDRL-METALSCERT-26033, with metal certification and DD Form 1423s required. Sampling must follow MIL-STD-1916, ASQ H1331 Table 1, or a comparable zero-based sampling plan, and identification marking must comply with MIL-STD-130N(1). Delivery is required within 137 days after order, with an original required delivery date of November 10, 2026. The terms are FOB Destination, with both inspection and acceptance occurring at the destination in Jacksonville, Florida. Packaging must meet ASTM D3951 and MIL-STD-129 standards, though the DLA Master List of Technical and Quality Requirements takes precedence. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The solicitation also incorporates various DFARS and FAR clauses regarding cybersecurity, domestic material restrictions, and a price evaluation preference for certified HUBZone Small Business Concerns.

DLA FLEET READINESS CENTER SOUTHEAST

POSTED

DEADLINE

ASTM A36 C3X5.0LBSX20'

Solicitation # SPEFA3-27-T-0045

Solicitation SPEFA3-27-T-0045 is a procurement by the DLA Fleet Readiness Center Southeast for 12 feet of ASTM A36 channel bar. The material specifications require a 1015-1029 LCS alloy with dimensions of C3X5.0LBS per foot by 20 feet, adhering to ASTM A36/A36M-19 standards. The contract specifies a delivery timeline of 162 days after order, with an original required delivery date of November 10, 2026. Delivery is FOB Destination to the DLA Distribution Jacksonville facility, with a permitted quantity variance of plus or minus 10 percent. Technical compliance is governed by the DLA Master List of Technical and Quality Requirements, with metal certification required via CDRL-METALSCERT-26124 and DD Form 1423s. Quality assurance involves a zero-based sampling plan per MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Packaging must follow ASTM D3951 and RP001, while marking must comply with MIL-STD-129 and MIL-STD-130N(1). The solicitation includes standard FAR and DFARS clauses regarding SAM maintenance, HUBZone price preferences, and cybersecurity requirements under DFARS 252.204-7012.

DLA FLEET READINESS CENTER SOUTHEAST

POSTED

DEADLINE

Solicitation # SPEFA5-27-T-0208

Solicitation SPEFA5-27-T-0208 is a federal procurement issued by the Defense Logistics Agency (DLA) Aviation at Cherry Point, North Carolina, for the acquisition of one sleeve bushing, part number MS14238C03-013, under NSN 5365LN0035907. The contract specifies delivery as FOB Destination to the Fleet Readiness Center East in Cherry Point, NC, with a required delivery date of November 13, 2026. Inspection and acceptance are both set at the destination. The contractor must adhere to strict quality and packaging standards, including ASTM D3951 for packaging and MIL-STD-129 for marking and labeling, with DLA Master List requirements taking precedence. Sampling must follow MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan for acceptance. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment. The contract incorporates several FAR and DFARS clauses, including those regarding the Buy American Act, combating trafficking in persons, and safeguarding covered defense information.

Defense Logistics Agency

POSTED

about 2 hours ago

DEADLINE

in 8 days

General Info

Agency

New York → Onondaga County

NAICS

488190 - Other Support Activities for Air Transportation

Place of Performance

NY, USA

Set-Aside

NONE

Documents

itb

High

AI Contract Breakdown

Uniform Contract Format

Timeline

1 update

PhaseClosed

PostedApr 17

Solicitation

Notice updatedApr 17

Response deadline changed from May 22, 2025 to May 1, 2025. NAICS code added: 488190. The notice description changed.

Response DeadlineMay 1

Deadline has passed

Submission Closed

05/01/2025

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyNew York → Onondaga County

Contacts1 person available

OfficeN/A

Organization / AgencyNew York → Onondaga County

Office AddressN/A

Contacts

Deborah A Magaro-Dolan

Full Description

RFB-0011216 - Provide an overhaul service for the Air-1 Helicopter engine. Location: Onondaga County, New York, United States. Serve to deliver the overhaul for the Air-1 Helicopter engine.