Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Fuse Holder

Active

Z4969State & Local

Response Deadline08/13/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to a fuse holder assembly specifically designed for capacitor banks operating at 69,000 volts, used at four locations: North, Radnor, South, and West. The approved part for this assembly is the COOPER FN11B1, and only this manufacturer’s component is accepted for compliance. The solicitation, issued by Nashville Electric Service under solicitation number Z4969, is targeted at suppliers capable of providing this critical electrical component for high-voltage infrastructure. The solicitation was posted on August 10, 2026, with a firm response deadline of August 13, 2026, at 7:00 PM Eastern Time. This procurement falls under the state and local government (SLED) category, with performance required in Nashville, Tennessee. All bids must be submitted through the vendor portal linked to the solicitation, and inquiries should be directed to the primary point of contact, K. Kegley, via email or phone provided.

General Info

Fuse holder assembly for 69kV capacitor banks, COOPER FN11B1 only, bid due August 13, 2026, Nashville Electric Service.

Agency

Tennessee → Nashville Electric ServiceView Agency

NAICS

335313 - Switchgear and Switchboard Apparatus ManufacturingView NAICS

Place of Performance

Nashville, TN, USA

Set-Aside

NONE

Documents

(1)

Z4969_RFB.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation

PostedAug 10

Solicitation

Response DeadlineAug 13

Submission deadline

Response Deadline

08/13/2026, 07:00:00 PM UTCin 2 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyTennessee → Nashville Electric Service

Contacts1 person available

OfficeNashville, TN, USA

Organization / Agency

Tennessee → Nashville Electric Service

View Agency Profile

Office AddressNashville, TN, USA

Contacts

Procurement Contact

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

HOLDER ASSY/CAPACITOR FUSE CAPACITOR FUSE HOLDER ASSEMBLY. USED ON 69,000 VOLT CAPACITOR BANKS AT NORTH, RADNOR, SOUTH, AND WEST. Approved Manufacturers and/or Part Numbers: COOPERFN11B1

Similar Contracts

Same NAICS industry code

Circuit Breaker IDIQThe Circuit Breaker IDIQ is a forecasted contract opportunity issued by the Western Area Power Administration under the Department of Energy, targeting small businesses through an 8(a) set-aside. The North American Industry Classification System code 335313 indicates the scope involves the manufacture of electric lighting and wiring equipment, suggesting the contract will support procurement of circuit breaker-related products or services. The contract is structured as an Indefinite-Delivery, Indefinite-Quantity vehicle, allowing for multiple awards and flexible ordering over its lifetime. The point of contact for small business inquiries is listed as two Small Business Program Managers, both reachable via email, indicating a dedicated focus on small business engagement and support throughout the acquisition process. No specific place of performance or office address is provided, suggesting the work may be performed across multiple locations or will be determined during individual order issuance. The forecast was posted in August 2026, providing early visibility into upcoming procurement plans for interested small businesses.

Western Area Power Administration

POSTED

about 10 hours ago

DEADLINE

Purchase Order - Siemens 550kV Extra High Voltage (EVH) Breaker Bushing ReplacementThe Western Area Power Administration, under the U.S. Department of Energy, has issued a forecast for the replacement of 550kV Extra High Voltage (EVH) breaker bushings from Siemens, indicating an upcoming procurement requiring specialized high-voltage electrical components. This action falls under NAICS code 335313, which pertains to the manufacturing of other electrical equipment and components, suggesting the contract will involve the supply of custom-engineered insulation and termination systems designed for ultra-high voltage transmission infrastructure. The project is targeting critical grid assets where reliability and safety are paramount, and the replacement is likely part of a broader modernization or maintenance initiative to ensure transmission system integrity. The solicitation is published as a forecast with no formal solicitation number and is intended to provide visibility to potential vendors, particularly small businesses, as evidenced by the inclusion of two designated Small Business Program Managers as points of contact. No specific place of performance or set-aside details are provided, implying the work may be performed at multiple transmission sites across the Western Area Power Administration’s service territory. While the posted date indicates the forecast was made available in 2026, the actual contract award and execution may follow at a later date with a formal competitive process. Vendors are expected to meet stringent technical specifications for high voltage bushings, including thermal, dielectric, and mechanical performance under extreme environmental conditions.

Western Area Power Administration

POSTED

about 10 hours ago

DEADLINE

Circuit Breaker IDIQThe Circuit Breaker IDIQ is a forecasted indefinite-delivery/indefinite-quantity contract issued by the Western Area Power Administration under the U.S. Department of Energy, aimed at procuring circuit breaker-related products and services. The contract is set aside exclusively for small businesses, as indicated by the 8AN set-aside designation, to promote small business participation in federal procurement. The NAICS code 335313 corresponds to the manufacturing of switchgear and switchboard apparatus, aligning the contract’s scope with electrical equipment fabrication and related technical support. There is no specified solicitation number or award date, as this is a pre-solicitation forecast, meaning potential vendors should prepare for an upcoming release. The place of performance and delivery locations are not yet defined, allowing for flexibility across regions served by the Western Area Power Administration. The point of contact for small business inquiries includes two program managers at the agency, both reachable via email, who serve as primary resources for small business concerns regarding the acquisition. Prospective bidders are directed to the agency’s public acquisition forecast document for further details and updates.

Western Area Power Administration

POSTED

about 10 hours ago

DEADLINE

HUBBELL RFL 9508 POWERLINE CARRIER (PLC) SPARE PARTS FOR SOUTH DAKOTA MAINTENANCEThe contract pertains to the procurement of spare parts for HUBBELL RFL 9508 Powerline Carrier (PLC) systems to support maintenance operations in South Dakota under the Western Area Power Administration, a division of the Department of Energy. This forecasted procurement is specifically designated as a small business set aside, indicating a preference for awarding the contract to small businesses as defined by the Small Business Administration. The NAICS code 335313 identifies the industry as Electric Lamp and Lighting Equipment Manufacturing, aligning with the technical nature of the PLC components required. Spare parts will be utilized to ensure continued reliability and operational integrity of existing powerline carrier systems critical to grid communication and control functions within the region. The place of performance is clearly designated as South Dakota, emphasizing that the maintenance activities supported by these spare parts occur within the state. No specific city or postal address is provided, suggesting the contract is broadly scoped across the agency’s operational footprint in the state. The point of contact for small business inquiries includes two Small Business Program Managers affiliated with Western Area Power Administration, both reachable via email for potential vendors seeking further clarification or engagement opportunities. This forecast, posted in August 2026, serves as an early indicator of upcoming procurement activity to assist small businesses in preparing proposals, though no solicitation number or formal solicitation date is listed at this time.

Western Area Power Administration

POSTED

about 10 hours ago

DEADLINE

GC DWA Station Breakers & Outdoor TerminationsThe contract relates to the procurement of station breakers and outdoor terminations for the Western Area Power Administration, part of the U.S. Department of Energy, under NAICS code 335313 which classifies it as Electrical Equipment Manufacturing. The forecast was posted on August 10, 2026, indicating a future acquisition opportunity aimed at supporting infrastructure needs for power transmission and distribution systems. There is no specified solicitation number or set-aside type, suggesting the opportunity is for informational purposes and has not yet moved into a formal bidding phase. The place of performance and office address details are not provided, leaving the specific project locations TBD. Contact for small business inquiries is handled by two Small Business Program Managers at tetrault@wapa.gov and setzel@wapa.gov, indicating a priority on engaging small businesses in the acquisition process.

Western Area Power Administration

POSTED

about 10 hours ago

DEADLINE

GC DWA Station Outdoor TerminationsThe Western Area Power Administration, under the Department of Energy, has issued a forecast for GC DWA Station Outdoor Terminations, targeting procurement under NAICS code 335313, which pertains to other electrical equipment and component manufacturing. This opportunity is part of an acquisition forecast published on August 10, 2026, and is intended to support infrastructure needs related to outdoor electrical terminations at DWA Station. No specific solicitation number, set-aside details, or place of performance have been provided yet, indicating this is a preliminary notice to inform potential vendors, particularly small businesses, of an upcoming requirement. The point of contact for small business inquiries includes two Small Business Program Managers reachable via email through the Western Area Power Administration, indicating the agency’s focus on engaging small business participation. The forecast is accessible via a publicly available document on the Department of Energy’s website, allowing interested contractors to monitor developments as the procurement process advances.

Western Area Power Administration

POSTED

about 10 hours ago

DEADLINE

FLG & PPK Substation Disconnect SwitchesThe Western Area Power Administration, under the U.S. Department of Energy, has issued a forecast for the procurement of disconnect switches for the FLG and PPK substations, targeting suppliers in the electrical equipment manufacturing sector with the NAICS code 335313. This acquisition is part of the agency’s infrastructure modernization efforts to enhance grid reliability and operational safety at key substation locations, though specific delivery sites and performance locations are not detailed in the posting. The forecast indicates an upcoming opportunity for small businesses to compete for the contract, with two designated Small Business Program Managers available for outreach and guidance through the procurement process. No solicitation number is provided, and the posting serves as an advance notice rather than a formal request for proposals, allowing interested vendors to prepare in advance for a future competitive bid process. The document was published on August 10, 2026, and while the exact timeline for release of the formal solicitation is not specified, interested parties are encouraged to monitor official channels for updates. The contract is expected to involve the supply and possibly installation of high-voltage disconnect switches, critical components for isolating electrical circuits during maintenance or emergencies. The agency has identified a preference for small business participation, but no set-aside type or dollar value estimates are indicated in the forecast.

Western Area Power Administration

POSTED

about 10 hours ago

DEADLINE

AUTOMATIC TRANSFER SWITCH FOR WATERTOWN SUBSTATIONThe Western Area Power Administration, under the U.S. Department of Energy, has issued a forecast for the acquisition of an automatic transfer switch intended for use at the Watertown Substation in South Dakota. This procurement is designated as a small business set-aside under NAICS code 335313, which pertains to the manufacturing of power, distribution, and specialty lighting equipment. The opportunity is intended to support small business participation and is publicly listed with a posted date of August 10, 2026, indicating a future procurement timeline. Two Small Business Program Managers are designated as points of contact, both reachable via email through the WAPA domain, to assist interested small businesses with inquiries related to the acquisition. The contract does not currently include a solicitation number or detailed specifications, suggesting it is a planning or forecasting notice rather than an active request for proposals. The place of performance is confirmed to be in South Dakota, but no specific city or mailing address is provided in the data.

Western Area Power Administration

POSTED

about 10 hours ago

DEADLINE

Keswick Substation Disconnect Tandem/Selector Switch ReplacementThe contract pertains to the replacement of disconnect tandem and selector switches at the Keswick Substation in California, a critical infrastructure upgrade aimed at improving the reliability and safety of power transmission operations. The work involves specialized electrical equipment replacement requiring technical expertise in high-voltage switching systems, with performance occurring at the substation location in California. The solicitation is forecasted under the SBA small business set-aside category, indicating preferential consideration for small business concerns, and is classified under NAICS code 335313 for Electric Lighting and Electrical Equipment Manufacturing. The Western Area Power Administration, part of the Department of Energy, is the responsible agency, with designated Small Business Program Managers available for outreach and support. No solicitation number is currently assigned as this is a pre-solicitation forecast, serving as an early indicator of upcoming procurement activity.

Western Area Power Administration

POSTED

about 10 hours ago

DEADLINE

Circuit Breaker Supply – NSN 5925-99-357-9382A single circuit breaker with NSN 5925-99-357-9382 is being procured under a subcontract arrangement to meet DLA Master List compliance standards. The item must be delivered no later than 20 days after contract award, with all requirements tied to military specifications and logistical protocols. The solicitation was posted on August 10, 2026, with responses due by August 21, 2026, and is managed by the Active Devices Division within the Department of Defense. Performance is required at FPO, zip code 96694, under NAICS code 335313, indicating the procurement is specific to electrical equipment manufacturing within the defense supply chain.

ACTIVE DEVICES DIVISION

POSTED

about 16 hours ago

DEADLINE

Supply of NSN 6140015527539 (Electrical Power Supply Unit)

Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

Supply of Electrical Connectors (NSN 5935016793747)The contract entails the supply of two units of an electrical connector identified by NSN 5935016793747, with strict adherence to military specifications and applicable export control regulations. This is a subcontract under the Department of Defense, managed by the ACTIVE DEVICES DIVISION, with performance required at a location in Norfolk, Virginia, specifically at zip code 23511-4397. The solicitation was posted on August 10, 2026, and responses must be submitted by August 21, 2026, with the NAICS code 335313 indicating classification under Electrical Equipment and Component Manufacturing. The contract is subject to compliance with all relevant defense and international trade controls, and the official reference for submissions and details is accessible through the DIBBS portal at the provided link.

ACTIVE DEVICES DIVISION

POSTED

about 16 hours ago

DEADLINE

More opportunities from Tennessee → Nashville Electric Service

Same awarding agency

Crossarm Weathered Steel

Solicitation # Z4957

The contract specifies the procurement of weathered steel crossarms measuring 4 inches by 4 inches by 9 feet 4 inches, designed for tangent applications and fabricated from ASTM weathering steel in compliance with NES Specification 33-506R4 and Drawing LSK-1254-F. Each crossarm must be accompanied by material certifications verifying the use of certified weathering steel, ensuring structural integrity and corrosion resistance. Deliveries are to be made on open flatbed trucks or trailers without packaging that could compromise handling or inspection upon arrival. Only approved manufacturers including REINKE, SFORMS, THOMAS-B, UNIVERSA, HUGHESB, DIXIE, FALCONS, and DIS-TRAN are eligible to supply these crossarms, and all shipments must fully align with the technical and compliance requirements outlined in the specification. The solicitation, titled Crossarm Weathered Steel with identification number Z4957, was posted on August 10, 2026, with a response deadline of August 14, 2026. Issued by Nashville Electric Service under the Tennessee State and Local Government (SLED) procurement category, the contract is intended for performance in Nashville, Tennessee. Primary contact for inquiries and submissions is Tiffany Caruthers, Procurement Contact, reachable via email at tcaruthers@nespower.com or phone at 615-747-3593. All bids must be submitted through the official vendor portal at the provided UI link, and no set-aside provisions are in effect for this solicitation.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Solicitation # Z4965

The contract is for a one-size-fits-most aerial lift harness featuring an H-style full body design with a 3-inch back ring, constructed from durable nylon webbing and equipped with pass-through friction buckles and an adjustable chest strap. The harness must meet ASTM and OSHA safety standards, and only specific approved manufacturers and part numbers—BUCKNGHMU64A23H6E00 and BASHLIN662AD-O—are acceptable for compliance. This solicitation, titled Lift Harness and identified by number Z4965, was posted on August 10, 2026, with a response deadline of August 17, 2026, at 7:00 PM. The solicitation is issued by Nashville Electric Service under the Tennessee state government, with performance required in Nashville, Tennessee. All proposals must be submitted through the vendor portal linked in the posting, and inquiries should be directed to the primary procurement contact, K Kegley, via email or phone provided.

Apparel Accessories and Other Apparel Manufacturing

POSTED

DEADLINE

Solicitation # Z4964

The contract solicits X Large premium grain cowhide driver gloves with the Gunn pattern and shirred elastic cuff, specified as GLOVE LEATHER XL ALL COW PREMIUM GRAIN LEATHER DRIVERS GLOVE, with approved part numbers BEARKNUGL-338-XL, KUNZGL556-XL, and YOUNGSTO11-3255-60-XL. The solicitation is issued under number Z4964 by Nashville Electric Service, a state, local, and education agency based in Nashville, Tennessee, with performance required locally in the same city and state. The solicitation was posted on August 10, 2026, and responses must be submitted by August 17, 2026, at 7:00 PM local time. Procurement inquiries should be directed to K. Kegley at kkegley@nespower.com or 615-747-3572. The solicitation is accessible via the vendor portal at the provided URL, and no set-aside classification or NAICS code is specified, indicating an open competition for qualified suppliers.

Other Leather and Allied Product Manufacturing

POSTED

DEADLINE

Solicitation # Z4960

The contract solicits safety glasses meeting ANSI Z87.1 standards, with two specified variants: silver mirror and brown flash mirror, both featuring anti-scratch coatings. Approved part numbers include BOUTON250470005, CROSSFIR263, and CROSSFIR29117, and the quantities required are 960 units total, with two distinct item numbers listed for the two mirror types. The procurement is issued by Nashville Electric Service under solicitation number Z4960, with a response deadline of August 13, 2026, and a posting date of August 10, 2026. The solicitation is classified under a SLED agency type, with performance and administrative responsibilities centered in Nashville, Tennessee. Contact for procurement inquiries is K Kegley, reachable via email and phone provided. All supplied glasses must strictly comply with ANSI Z87.1 safety requirements to qualify for award.

Ophthalmic Goods Merchant Wholesalers

POSTED

DEADLINE

Solicitation # Z4963

The contract solicits a line block with a 3-inch sheave mounted on ball bearings to ensure minimum friction, designed to accommodate rope up to 5/8 inch in diameter. The unit must include a safety hook and a swivel eye, feature a side-opening design for ease of use and installation, and be sourced from approved manufacturers or part numbers Hastings 3550 or SHERMHLB-472. The solicitation is issued by Nashville Electric Service under the state of Tennessee, targeting public sector procurement through a SLED agency classification, with responses due by August 13, 2026, at 7:00 PM local time. All proposals must be submitted through the vendor portal linked in the solicitation, and inquiries should be directed to the primary procurement contact, K Kegley, via email or phone provided. The place of performance is Nashville, Tennessee, with no specific set-aside type indicated.

Hardware Manufacturing

POSTED

DEADLINE

Solicitation # Z4959

The contract solicits the supply of 65-foot steel poles with a minimum capacity of 65 ft-kips at ground level, meeting the structural equivalence of Class H3 standards. Each pole must be hot dipped galvanized in full compliance with ASTM A123 to ensure long-term corrosion resistance and durability under environmental exposure. All fabrication details, including drilling patterns and engineering specifications, must adhere strictly to the most current version of the NES Specification LSK-1212 to guarantee uniformity and compatibility with existing infrastructure. The poles must be sourced exclusively from approved manufacturers, with acceptable part numbers including CHM65H3, TAPP65H3, DIS-TRAN65H3, FTWORTH65H3, MDHENRY65H3, ROHN65H3, SABRECO65H3, V&SSCHU65H3, and VALMONT65H3, ensuring proven performance and regulatory compliance. The solicitation is issued by Nashville Electric Service under reference number Z4959, with a posted date of August 10, 2026, and a firm response deadline of August 21, 2026. It is categorized as a state and local government procurement, with performance located exclusively in Nashville, Tennessee. Procurement inquiries and submissions must be directed to Tiffany Caruthers, the designated procurement contact at tcaruthers@nespower.com. Interested parties must submit proposals through the official vendor portal at the provided URL before the stated deadline, ensuring full adherence to all technical, material, and compliance requirements outlined in the solicitation.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Solicitation # Z4962

The contract solicits the Flagman Vest, a Class 3 Level 2 arc-rated safety vest meeting ANSI/ISEA 107 standards, in size XL with a lime-yellow summer-weight woven mesh construction. The vest features a zipper front closure, orange trim, and segmented heat-transfer reflective tape for enhanced visibility, along with two chest pockets and two inside hip pockets on each side. It must bear a single-color NES logo in black ink. Only approved manufacturers with the specific part number ESTEXMF1616L-FR3Z4P-XL are acceptable. The solicitation is issued by Nashville Electric Service under solicitation number Z4962, targeting state and local government procurement, with responses due by August 14, 2026, at 7:00 PM CT. The contract is tied to performance in Nashville, Tennessee, and all inquiries should be directed to the primary procurement contact, K. Kegley, via phone or email provided.

Clothing and Clothing Accessories Merchant Wholesalers

POSTED

DEADLINE

Solicitation # Z4967

The solicitation seeks a hand-line hook rated for 500 pounds, featuring a 3/8 inch diameter, an overall length of 6 and a half inches, and designed with two eyes for secure attachment. Approved manufacturers include BASHLIN with part number S35H and TALLMAN with part number 258, ensuring compliance with specified mechanical and safety standards. This item is intended for use in utility operations requiring reliable and durable equipment for manual handling tasks. The contract, identified by solicitation number Z4967, was posted on August 10, 2026, with responses due by August 14, 2026, at 7:00 PM. The procuring entity is Nashville Electric Service, a state and local government agency based in Nashville, Tennessee. All performance is expected to occur in Nashville, TN, and inquiries should be directed to K. Kegley, the primary procurement contact, via phone at 615-747-3572 or email at kkegley@nespower.com. The solicitation is accessible through the vendor portal at the provided UI link.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

Solicitation # Z4966

The contract requires the supply of aHOLDER TOOL AERIAL 3 POCKET AERIAL TOOL HOLDER with exact dimensions of 35x14x8 inches, constructed from hard plastic and featuring three large pockets with steps and two bit pockets lined with one-inch inside diameter PVC. Only approved manufacturers and part numbers are accepted, specifically AMERISA SKU-011 and GLOBAL B011. The solicitation is issued by Nashville Electric Service under solicitation number Z4966, with a posted date of August 10, 2026, and a response deadline of August 18, 2026, at 7:00 PM. The procurement is categorized under SLED and the place of performance is in Nashville, Tennessee. All inquiries and submissions must be directed to the primary point of contact, K Kegley, via email at kkegley@nespower.com or phone at 615-747-3572, and submissions are to be made through the vendor portal at the provided uiLink.

Office Supplies (except Paper) Manufacturing

POSTED

DEADLINE

Universal Hotstick

Solicitation # Z4961

The contract calls for the procurement of Universal Hot Sticks measuring 40 feet in length, constructed with round tubular fiberglass sections featuring Sure-Lock joints and a disconnect hook. Each section must include a position indicator running the full length of the stick and a numerical measuring system for precise depth and reach verification. The product must fully comply with all applicable OSHA and ASTM safety standards to ensure operational reliability and worker protection. Only approved manufacturers and part numbers—UTILITYUSTS-40-EM and HASTINGSEV-40—are acceptable for bid submission. The solicitation, identified by number Z4961, was posted on August 10, 2026, with a response deadline of August 14, 2026, at 7:00 PM. It is issued by Nashville Electric Service under the Tennessee state agency, with performance occurring in Nashville, TN. The procurement is categorized under SLED and is open to qualified vendors through the official vendor portal. All inquiries and submissions must be directed to the primary point of contact, K. Kegley, reachable via phone at 615-747-3572 or email at kkegley@nespower.com.

POSTED

DEADLINE

Adapter, Terminal, PVC Thermoplastic

Solicitation # Z4956

The contract is for an Adapter, Terminal, PVC Thermoplastic designed for a 2-inch diameter conduit with an actual outside diameter of 2.375 inches. Approved manufacturers include SEDCO, CAN-TEX, CARLONE, and ALLIED, with specific part numbers such as PICOMAME943J and ALLIED59620 required for compliance. The solicitation number is Z4956, issued by Nashville Electric Service under the state of Tennessee, targeting state, local, and educational (SLED) government procurement. The solicitation was posted on August 10, 2026, with a response deadline of August 14, 2026, at 7:00 PM Eastern Time. The place of performance is Nashville, Tennessee, and the primary point of contact for procurement inquiries is Tiffany Caruthers, reachable via email at tcaruthers@nespower.com or by phone at 615-747-3593. Further details and submission instructions can be accessed through the vendor portal at the provided uiLink.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Solicitation # Z4968

The contract solicits a slotted impact socket that is a 3-in-1 design with 9/16 inch and 3/4 inch sizes, featuring a 12-point deep socket configuration and a 1/2 inch drive, engineered specifically to withstand high torque demands of impact drivers. The product must meet rigorous performance standards to ensure compatibility and safety under heavy-duty industrial use, with only the approved part number KLEIN66031 accepted. The solicitation is issued by Nashville Electric Service under solicitation number Z4968, targeting suppliers capable of delivering industrial-grade tools that meet precise engineering requirements for reliability in electric utility applications. The solicitation was posted on August 10, 2026, with responses due by August 13, 2026, and is open to vendors serving state, local, and education government entities. Performance must occur within Nashville, Tennessee, and the primary point of contact for procurement inquiries is K. Kegley, reachable via email at kkegley@nespower.com or by phone at 615-747-3572. Additional details and submission guidelines are available through the vendor portal link provided by Nashville Electric Service.

Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing

POSTED

DEADLINE