FY26 Navy Brig Computer Numerical Control (CNC) Machine

SOURCES SOUGHT:  THIS IS NOT A NOTICE OF REQUEST FOR QUOTATION BUT INFORMATION AND PLANNING PURPOSES ONLY!  This notice does not constitute a commitment by the Government.  All information submitted in response to this announcement is voluntary and the Government will not pay for information requested nor will it compensate any respondent for any cost incurred in developing information provided to the Government.

The Notice ID number is N4561026RX00011 and shall be used to reference any written responses to this source sought.

The requirement is to provide: 

628 Contracting Squadron and NAVCONBRIG  at Joint Base Lindsey Graham  anticipates a requirement to acquire one (1)  CNC machine to support various programming interfaces and accommodate diverse materials expanding the shop's capabilities beyond traditional woodworking to include projects such as aluminum signs, brass hardware, or plastic industrial
components. Machine is required for PathPilot, and interfaced based on the industrial-standard LinuxCNC.      

Salient Characteristics:

Machine Requirements:
l) Travels
2) X-Axis: 24.75 in. (625 mm)
3) Y-Axis: 55.75 in. (1415 mm)
4) Z-Axis: 6.70 in. (170 mm)
5) Spindle Power: 2 hp / 1.5 kW
6) Spindle Type: Electrospindle
7) Minimum Speed: 10,000 RPM
8) Maximum Speed: 24,000 RPM
9) Cooling; Water-Cooled (Chiller Included)
10) Spindle Taper: Stock - ER20 / With ATC - IS020
11) Thread Machining: Thread Mill
12) CNC Router: Single-Phase 115 Vac, 50/60 Hz, 15A breaker
13) Storm Vacuum Pump: Single-Phase 220-240 Vac / 20A breaker
14) Machine Specs
15) Table Type: Integrated Vacuum Table
16) Table Size: 26.5 in. x 65 in. (680 mm x 1650 mm)
17) Gantry Clearance: 6 in. ( 154 mm)
18) Machine Footprint: 72 in. x 39 in. (1.8 m x I m)
19) Overall System Height: 76.5 in. (1 .9 m)
20) Typical System Weight: 900 lb. ( 408 kg)
21) Linear Motion
22) Axis Motion: Ballscrew and Stepper Driver
23) Guideways: Precision Linear Guideway
24) Maximum Feed Rate: 200 1PM (5.0 m/min)
25) Construction
26) Stand: Welded Steel (Included)
27) Machine Base: Cast Iron
28) Gantry: Aluminum
29) Resolution & Accuracy
30) Resolution: 0.00025 in. (0.006 mm)
31) Ball Screw Positional Accuracy: ±0.002 in.i'ft. (±0.167 mm/m)
32) Repeatability: ±0.001 in. (±0.02 mm)
33) Certificate oflnspection: Download Example Here
34) Easy to learn, touch screen friendly user interface
35) Support for up to four axis continuous machining
36) Built-in recommended speeds and feeds calculator
37) 80GB program memory
38) On Site Installation
39) On Site training
40) 24R CNC Router
4 I) PathPilot Software
42) High Speed Machining
43) 64GB Memory
44) Coordinate Rotation
45) Conversational Programming
46) Software Updates
4 7) Leveling Caster Kit, I 000kg
48) Grease, Hiwin G-05, 400g
49) 1 HP Dust Collector with 30-micron bag filter
50) Dust Collection Hose, 4" ID x 5m Long - For Use With ATC
51) Printed Manual
52) PathPilot Controller
53) PathPilot Controller Vesa Mount
54) Touch Screen Kit
55) Waterproof Mouse
56) Waterproof Mini-Keyboard
57) Jog Shuttle Controller
58) Controller Arm
59) Electronic Tool Setter
60) Automatic Tool Changer
61) Machine Assembly
62) Canister Filter for Storm Vacuum System - 3in
63) Storm Vacuum Adapter Kit - 3in
64) Gasket, 5/16 in. Vacuum Neoprene Foam, 20 Feet
65) Spring-Loaded CNC Drag Knife
66) 24R Starter Cutting Tool Kit by Amana Tools
67) 1 .5 in. Spoilboard Surfacing Tool
68) ER20 Collet Set (30 Pcs.) - Inch
69) Huot ER20 Collet Rack
70) 1SO20 CNC Operator Set (Inch)
71) ISO20 Tool Holder, ER16A, 30mm Gauge Length
72) ISO20 Tool Holder, ER20A, 30mm Gauge Length
73) ISO20 Tool Holder Wrench
74) Tool Tightening Fixture, 1SO20
75) IP54 OriginCal Absolute Digital Calipers Oto 6 in.
76) USB M-Code 1/0 Interface Kit
77) Aspire Software
78) PathPilot Keyboard Shortcuts Mousepad