Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

FY27 Tire Repair and Replacement

Active
FL27-01State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled FY27 Tire Repair and Replacement under solicitation number FL27-01 is issued by the Idaho Fleet Services agency and is open to responses from interested parties through a formal solicitation process. Bids must be submitted no later than August 12, 2026, at 9:00 PM Eastern Time, with a mandatory virtual bid opening scheduled via Zoom meeting on the same date, accessible through the provided link, meeting ID, and passcode. The contract is classified under the State, Local, and Education (SLED) organization type and is intended to support tire maintenance needs for state fleet vehicles across Idaho, with performance expected to occur statewide. Primary point of contact for technical and operational inquiries is Joe Shoen, Fleet Manager, reachable via phone or email, while Mike Fagerness, Procurement & Contracting Administrator, serves as the secondary contact for administrative and contracting-related matters. All communications and submissions must adhere to the official procurement portal linked in the posting, and no set-aside provisions are currently designated for this solicitation.

General Info

Idaho Fleet Services seeks tire repair/replacement bids due August 12, 2026, for statewide fleet operations.

Agency

Idaho → Fleet ServicesView Agency

NAICS

811198 - All Other Automotive Repair and MaintenanceView NAICS

Place of Performance

ID, USA

Set-Aside

NONE

Documents

(3)

FY27 Tire Repair and Replacement.pdf

PDF

Specifications_-_MATRIX.xlsx

XLSX

Sample_Agreement.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyIdaho → Fleet Services
Contacts2 people available
OfficeBoise, ID, 83713, US
Organization / Agency
Idaho → Fleet Services
View Agency Profile
Office AddressBoise, ID, 83713, US
Contacts
Mike FagernessProcurement & Contracting Administrator

Full Description

Show more
NOTE: Bid Opening Zoom Meeting Link: Join Zoom Meeting: BID ZOOM MEETING LINK Meeting ID: 853 4920 0922 Passcode: 028768

Similar Contracts

Same NAICS industry code

NAICS: 811198
New
Federal
36 MXG Corrosion Control Repair and Paint ServicesThis contract is a combined synopsis and solicitation for a small business set-aside under FAR 19.5, issued as an indefinite-delivery/indefinite-quantity (IDIQ) firm-fixed-price (FFP) contract for corrosion control repair and paint services on Guam, primarily for Aerospace Ground Equipment (AGE) and Munitions (MUNS) Trailers. The solicitation number is FA524026Q0017, with a five-year ordering period from September 7, 2026, to September 6, 2031, and a maximum contract lifecycle of five years and six months to accommodate orders issued near the end of the ordering period. The total ceiling value is $7,100,000, with individual task orders subject to a minimum order value of $2,500. Work must be performed at the contractor’s facility on Guam, though exceptions may apply as specified in task orders, and all deliveries are FOB destination, with final inspection and acceptance occurring at locations designated in each order, such as Andersen Air Force Base. Contractors are required to remove corrosion, perform surface preparation, apply protective coatings per Technical Orders like TO 1-1-691 and TO 1-1-8, and replace hardware under the micro-purchase threshold, using approved methods such as MIL-DTL-5541 and MIL-PRF-32550 for chemical conversion and zinc-rich priming. Personnel must hold current certifications, use appropriate personal protective equipment, and comply with OSHA standards, while also applying all required markings and stencils in accordance with TO 35-1-3 and TO 35-1-18. The contract includes stringent cybersecurity requirements under 252.204-7012 and 252.204-7008, prohibits hexavalent chromium, mandates adherence to the safeguarding of covered defense information, and bans procurement from the Xinjiang region and business with the Maduro regime. Offerors must submit proposals in three volumes via email to three designated points of contact no later than 11:00 a.m. Chamorro Standard Time on August 21, 2026, with pricing required exclusively in a specified .xlsx format and past performance information limited to a fact sheet and questionnaire. The evaluation is strictly lowest-priced, technically acceptable, requiring full conformance to all mandatory requirements without trade-offs
FA5240 36 Cons Lgc

POSTED

2 days ago

DEADLINE

in 23 days
View Details

More opportunities from Idaho → Fleet Services

Same awarding agency

NAICS: 423120
SLED
FY27 Fleet Maintenance PartsThe solicitation for FY27 Fleet Maintenance Parts, identified as FL27-02, is issued by the Ada County Highway District (ACHD) through its Fleet Services Division in Boise, Idaho, with a response deadline of August 5, 2026, at 3:00 PM Pacific Time. The contract is structured as a Firm-Fixed-Price Purchase Agreement with performance expected to commence immediately upon execution and extend through September 30, 2027. Deliveries are F.O.B. Boise, meaning the vendor assumes all transportation costs and risks until goods reach ACHD’s principal facility. The scope includes supplying a wide range of fleet maintenance parts listed in Line Items 1–47, with quantities specified but unit and extended pricing left blank for vendor submission. Vendors must also address monthly on-site costs and a percentage-based parts markup, with all pricing submitted as fixed and non-adjustable throughout the term. Evaluation of proposals will follow a best-value, trade-off methodology prioritizing cost competitiveness across three primary factors: Proposal Cost (33.9%), Parts Mark-Up Costs (25.4%), and Monthly Operation Costs (16.9%), collectively accounting for 76.2% of the scoring. Non-cost factors include Firm History and Experience (6.8%), Firm Qualifications (6.8%), Project Understanding and Approach (8.5%), and Past Performance with ACHD (1.7%), totaling 23.8%. Technical compliance is mandatory, requiring adherence to industry standards such as JIC, SAE, DOT, and OEM equivalents, with fasteners meeting Grade 5 specifications. Proposers must submit key personnel resumes limited to half a page each, a completed Specifications Matrix, warranty disclosures, and a DBE certification status if applicable. ACHD retains final inspection and acceptance authority and requires strict compliance with delivery and reporting protocols, including mandatory use of work orders, real-time inventory tracking, and monthly reporting deadlines. The contract includes unique administrative conditions such as a 30-day transition window, inventory buyback at original cost upon termination, prohibition of freight markups, no cash discounts during evaluation, and a strict prohibition on alternative submission methods—electronic filing through the ACHD eProcurement Portal is the only accepted method. All submissions must include a signature form and affirm compliance with Idaho-specific anti-boycott, government of China, and discrimination prohibitions under state law. No formal FAR clauses are incorporated; contract terms are defined
Motor Vehicle Supplies and New Parts Merchant Wholesalers

POSTED

8 days ago

DEADLINE

in 8 days
View Details