Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

GAGE, COMPOUND PRESSURE

Active
SPE4A0-26-T-4616Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of one compound pressure-vacuum dial indicator gage, identified by NSN 6685-01-438-5089. The item is designated as a critical application item and corresponds to Ashcroft Inc part numbers 25-1009SW-02B-XUC-30/0/15 and 251009SW02BXUC30IMV/15PSI. Delivery is required within five days after order, with the final destination and inspection point located in Sioux Falls, South Dakota. The agreement mandates strict adherence to DLA packaging requirements and technical quality standards, including specific marking and labeling per MIL-STD-129. Quality assurance is governed by zero-based sampling plans such as MIL-STD-1916 or ASQ H1331, with specific verification levels assigned for critical, major, and minor attributes. The material has no shelf life requirement and must be shipped via the fastest traceable means, explicitly prohibiting the use of parcel post.

General Info

Procurement of one critical pressure-vacuum dial indicator gage for delivery to Sioux Falls.

Agency

Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYSView Agency

NAICS

334519 - Other Measuring and Controlling Device ManufacturingView NAICS

Place of Performance

1201 W ALGONQUIN ST BLDG 42, SIOUX FALLS, SD, 57104-0264, USA

Set-Aside

NONE

Documents

(1)

SPE4A0-26-T-4616 RFQ

PDF•18 pages•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS
View Agency Profile
Office AddressUSA
Contacts
THOMAS ANDERSON
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
GAGE,COMPOUND PRESSURE-VACUUM,DIAL INDIC
GAGE,COMPOUND PRESS
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
DRESSER INDUSTRIES INC
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
TECH DATA:
"DLA does not have a bidset available"
SPE4A0-26-T-4616
SECTION B
SAMPLING:
CRITICAL APPLICATION ITEM
ASHCROFT INC 38056 P/N 25-1009SW-02B-XUC-30/0/15
ASHCROFT INC 38056 P/N 251009SW02BXUC30IMV/15PSI
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018016102 0001 EA 1.000
NSN/MATERIAL:6685014385089
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
FB6411
FB6411 114 FW LRS SD ANG
CP 605 988 5917
1201 W ALGONQUIN ST BLDG 42
SIOUX FALLS SD 57104-0264
US
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FB6411
SPE4A0-26-T-4616
SECTION B
PR: 7018016102 PRLI: 0001 CONT’D
FB6411 114 FW LRS SD ANG
CP 605 988 5917
1201 W ALGONQUIN ST BLDG 42
SIOUX FALLS SD 57104
US
M/F: (TCN) FB641162310009
RDD: 777
PROJ: TP 1
SUPP ADD: YAZ680 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: 01 ADV: 2D FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:08/24/2026
SPE4A0-26-T-4616 NSN/Part Number: 6685-01-438-5089 Quantity: 1 EA Purchase Request: 7018016102QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334519
New
DIBBS
TRANSDUCER, MOTIONAL PI
Solicitation # SPE4A6-26-T-22QF
This contract is for the procurement of 46 units of a motional pickup transducer, identified as a commercial off the shelf item from Kulite Semiconductor Products Inc with part number ITQ-R36-1000-100SG and NSN 6695015368287. The agreement specifies a delivery timeframe of 162 days, with a required delivery date of July 31, 2027, and shipping destined for DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to DLA packaging requirements, including ASTM D3951 and MIL-STD-129 for marking and labeling. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero based sampling plan unless otherwise specified. Inspection and acceptance will occur at the destination, and the supplier must follow the DLA Master List of Technical and Quality Requirements for all physical identification and bare item marking.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334519
New
DIBBS
INDICATOR SUBASSEMBLY,
Solicitation # SPE4A5-26-T-402F
This contract is for the procurement of 22 units of a liquid quantity indicator subassembly, identified by NSN 6680-01-537-6403 and associated with Vega Americas Inc part numbers NAP.SFSII and VE206753. The item is designated as a critical application item with no shelf life requirement. Delivery is required within 171 days, with a need ship date of March 1, 2027, and shipment is to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards per ASTM D3951 and MIL-STD-129. Quality assurance will be managed through inspection and acceptance at the origin using sampling methods such as MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions defined by NAVSEA.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
METER, TIME TOTALIZI
Solicitation # SPE4A5-26-T-403Z
This contract is for the procurement of 10 units of a time totalizing meter, identified by NSN 6645-01-534-3148 and part number D16G9F. The agreement is a total small business set-aside issued by the Department of Defense through the ASC Supplier Oper OEM Division. Delivery is required within 20 days after the order, with the final destination being the Naval Surface Warfare Center in Port Hueneme, California. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards under MIL-STD-129 and MIL-STD-2073-1E. Quality assurance will be managed via sampling methods such as MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the point of origin. Additionally, the contract prohibits the intentional use of mercury or mercury-containing compounds in the hardware, preservation, or packaging, except where functionally required by specific systems.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE7M1-26-T-325T
This solicitation from the Department of Defense Maritime Supply Chain is for the procurement of one power distribution panel, identified by part number 0001S00000052. The contract requires delivery within 935 days after the order is placed and is associated with purchase request 7018067569. Performance is designated for Hill AFB, and the solicitation is categorized under NAICS code 334519. The contract imposes strict cybersecurity and regulatory compliance standards, requiring CMMC Level 2 certification through either a third-party assessment or self-assessment. Additionally, the item contains technical data subject to ITAR or EAR export controls, meaning it cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Commerce. Contractors must have an approved US/Canada Joint Certification Program certification and complete specific DLA export-controlled technical data training to access the necessary documentation.
MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334519
New
DIBBS
RECEIVER, LIQUID LEV
Solicitation # SPE4A6-26-T-22PK
This contract is for the procurement of eight liquid level receivers, identified by NSN 6680-01-098-2479 and Setra Systems part number 31320-0100. The items are designated as critical application items and must be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The required delivery date is July 8, 2027, with a need ship date of February 12, 2027, and a delivery window of 162 days. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-2073-1E and MIL-STD-129, with a special marking for delicate instruments. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans, and the contractor must comply with CMMC Level 2 self-assessment and covered defense information regulations. Additionally, the contract strictly prohibits the intentional use of mercury or mercury-containing compounds in the hardware, preservation, or packaging, except where specifically permitted for functional components.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334519
New
DIBBS
TRANSDUCER, MOTIONAL
Solicitation # SPE4A5-26-T-355W
This contract is for the procurement of 20 motional transducers under solicitation SPE4A5-26-T-355W for the Department of Defense. The items are identified by NSN 6695-01-255-3319 and are designated as critical application items, with approved parts from Parker-Hannifin Corporation and Kavlico Corporation. Delivery is required within 136 days, with a required delivery date of August 3, 2026, shipping FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific standards for measuring and test equipment, source approval documentation, and packaging per ASTM D3951 and MIL-STD-129. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans. Additionally, the contractor must comply with Cybersecurity Maturity Model Certification Level 2 self-assessment and covered defense information requirements. Item Unique Identification is not required for this specific order.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334519
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE4A0-26-T-4609
This contract is for the procurement of one dial indicating pressure gage, identified by NSN 6685010466763 and part number SG8NN4HPWRANAG. The item must be manufactured in accordance with basic specification MIL-G-18997E. Delivery is required within 125 days after order, with FOB, inspection, and acceptance all occurring at the origin. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under RP001 and marking guidelines per MIL-STD-129, specifically noting the item as a delicate instrument. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required and compliant with NAVSEA 5100-003D.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 19 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
TRANSMITTER, LIQUID QUA
Solicitation # SPE4A6-26-T-22NC
This contract is for the procurement of three liquid quantity transmitters, identified by NSN 6680-01-214-8194 and Setra Systems part number 42525. The order is managed by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-T-22NC, with a required delivery date of May 22, 2027. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards such as MIL-STD-129 and MIL-STD-2073-1E. Quality assurance will be governed by MIL-STD-1916 or ASQ H1331 sampling plans. Notably, the contract prohibits the intentional addition of mercury or mercury-containing compounds in the hardware and packaging, and it specifies that there is no shelf life requirement for this material.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334519
New
DIBBS
GAGE, PRESSURE, DIAL
Solicitation # SPE4A5-26-T-403C
This contract is for the procurement of three dial indicating pressure gages, identified by NSN 6685-01-058-1576 and part number 80JX788. The items are designated as critical application items and must be sourced from approved manufacturers such as Ametek or Cotta Transmission Co. Delivery is required within 20 days of order, with the final destination being the USS Michael Monsoor DDG 1001. The contractor must adhere to strict quality and packaging standards, including MIL-STD-129 for marking and RP001 for palletization. Each item requires a temporary tag identifying the contract number, NSN, part number, and rated accuracy. Additionally, the contract prohibits the intentional use of mercury or mercury-containing compounds in the hardware or packaging, and sampling must be conducted according to MIL-STD-1916 or ASQ H1331 standards.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
INDICATOR SUBASSEMB
Solicitation # SPE4A5-26-T-402Z
This contract is for the procurement of four indicator subassemblies under solicitation number SPE4A5-26-T-402Z. The items are identified by NSN 6680-01-479-7820 and are associated with part numbers from Badger Meter Inc and Redington Counters Inc. Delivery is required within 10 days, with the shipment destined for Fort Drum, New York. The contract specifies FOB Origin shipping and designates the inspection and acceptance points at the destination. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards such as ASTM D3951 and MIL-STD-129. Quality assurance will be managed through sampling methods aligned with MIL-STD-1916 or ASQ H1331. Notably, the material has no shelf life requirement, and Item Unique Identification is not required. All shipments must be sent via the fastest traceable means, excluding parcel post.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
GAGE ROD-CAP, LIQUID LE
Solicitation # SPE4A6-26-T-26AL
This contract is for the procurement of one liquid level gage rod cap, identified by NSN 6680007808099. The item is classified as a critical application and configuration controlled item, referencing Detroit Diesel Corp drawing SD-1 and part number 5133486. Approved sources include UWD Mfg Inc, Brighton Cromwell LLC, and Rolls-Royce Solutions America Inc. The material has no shelf life requirement, and item unique identification is not required. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards per MIL-STD-129 and MIL-STD-2073-1E. Quality assurance will be conducted using sampling methods aligned with MIL-STD-1916 or ASQ H1331. Delivery is required within 20 days, with FOB origin for both inspection and acceptance. The shipment is destined for the Ordnance Readiness Development Center in Nantou County, Taiwan.
ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
INDICATOR, HUMIDITY, PLU
Solicitation # SPE4A5-26-T-389E
This solicitation, identified as SPE4A5-26-T-389E and issued by the Department of Defense via the DLA Aviation ASC Supplier Operations, is for the procurement of 154 units of humidity indicator plugs under National Stock Number 6685-01-371-6810. The contract falls under NAICS code 334519 and requires delivery within 162 days after the order is placed, with the place of performance located in Tracy, California. The agreement incorporates several critical technical and quality requirements, including DLA packaging standards, configuration change management, and inspection and acceptance at origin. Notably, the item contains technical data subject to export controls under ITAR or EAR regulations, meaning it cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Commerce. Access to this data is restricted to approved contractors with US/Canada Joint Certification Program certification and completed DLA export training. Item Unique Identification is not required for this specific request.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS

Same awarding agency

NAICS: 326122
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE4A0-26-T-4598
This contract is for the procurement of two metal tube assemblies, identified by NSN 4710-01-686-3443 and Sikorsky Aircraft Corporation part number 70306-02122-046. The order is managed under solicitation SPE4A0-26-T-4598 with a required delivery date of August 28, 2026, and a delivery window of five days after the order is placed. The items are to be delivered FOB Origin, with inspection and acceptance occurring at the destination. The shipment is destined for the US Army SSA in Romania at Mihail Kogalniceanu. Compliance with DLA packaging requirements RP001 and marking standard MIL-STD-129 is mandatory. Additionally, the contract strictly prohibits the use of Class I ozone depleting chemicals in the manufacturing or delivery of the items, requiring any substitute chemicals to be submitted for approval.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
TERMINAL, LUG
Solicitation # SPE4A0-26-T-4610
This contract is for the procurement of five lug terminals, identified by NSN 5940-01-663-6594 and part number 82-9133 from Grote Industries Inc. The order is governed by the DLA Master List of Technical and Quality Requirements, specifically referencing standards for packaging, government identification removal, and bare item marking. Quality assurance is managed through certificate of conformance procedures and specific sampling methods based on MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. The delivery is set for five days after the order is received, with the shipping destination being Fort Drum, New York. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization follows the RP001 DLA requirements. The shipment is designated as an NMCS shipment and must be sent via the fastest traceable means, excluding parcel post.
Current-Carrying Wiring Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 327110
New
DIBBS
ADAPTER, ELECTRICAL
Solicitation # SPE4A0-26-T-4607
This contract is for the procurement of one electrical adapter, identified as a commercial off the shelf item from Glenair Inc with part number 712FS277M1010-31 and NSN 5975016814814. The order is managed under solicitation number SPE4A0-26-T-4607 for the Department of Defense Aviation Supply Chain. Delivery is required within five days of order, with a required delivery date of July 6, 2026. The agreement specifies that shipping is FOB Origin with inspection and acceptance occurring at the destination. Packaging must adhere to DLA requirements, specifically RP001 and MIL-STD-129, with hazardous materials following IP025 or non-hazardous items following ASTM D3951. The final destination for the shipment is MCAS Futenma in Okinawa, Japan.
Pottery, Ceramics, and Plumbing Fixture Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
INSULATION SLEEVING, EL
Solicitation # SPE4A0-26-T-4615
This contract is for the procurement of 50 units of electrical insulation sleeving, identified by NSN 5970-01-319-4531 and part number M23053/1-101-0. The material must be supplied in 4-foot lengths and adheres to the SAE AS23053/1 Revision A standard. This is designated as a critical application item with a non-extendable shelf life of 12 months. The agreement mandates strict quality and packaging standards, requiring compliance with MIL-STD-1916 or ASQ H1331 for sampling and MIL-STD-129 for marking. Packaging must follow DLA requirements and MIL-STD-2073-1E. Delivery is required within 5 days after the order, with the inspection and acceptance points set at the point of origin. The contract also specifies that components must align with Qualified Products Lists or Qualified Manufacturers Lists.
Noncurrent-Carrying Wiring Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336611
New
DIBBS
PANEL, ALARM RELAY
Solicitation # SPE4A0-26-T-4596
This contract is for the procurement of one Alarm Relay Panel, identified by NSN 6320-01-448-6265 and Dynalec Corporation part number 004581. The item is designated as a critical application item and must be delivered to the USS Richard M McCool Jr (LPD-29) in Pascagoula, Mississippi. Delivery is required within five days of order, and the shipment must be handled via the fastest traceable means, specifically prohibiting the use of parcel post. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Quality assurance will be conducted via sampling methods according to MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds in the hardware, preservation, or packaging, except where specifically allowed for functional components like batteries or sensors.
Ship Building and Repairing

POSTED

about 19 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CONDUIT ASSEMBLY, AI
Solicitation # SPE4A0-26-T-4613
This contract is for the procurement of one AI Conduit Assembly, identified by NSN 4920015595138 and part number 23A02829-45 from Joslyn Sunbank Company, LLC. The agreement specifies a delivery timeframe of five days and requires the item to be shipped via the fastest traceable means to ASD Oceana in Virginia Beach, Virginia. The order is subject to strict quality and technical requirements, including DLA packaging standards and specific sampling methods such as MIL-STD-1916 or ASQ H1331. Inspection and acceptance will occur at the destination, and all marking and palletization must comply with MIL-STD-129 and RP001. The contract also notes that covered defense information may apply and mandates the removal of government identification from any non-accepted supplies.
Other Electronic Component Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335931
New
DIBBS
COVER, TERMINAL BOARD
Solicitation # SPE4A0-26-T-4595
This contract is for the procurement of one unit of a terminal board cover, identified by NSN 5940010883792 and part number MS18029-2S-8. The item is designated as a critical application item and must be manufactured according to basic specification MS18029E. Delivery is required within five days of order, with the shipping destination located at Camp Humphreys in Pyeongtaek, South Korea. Quality assurance is governed by the DLA Master List of Technical and Quality Requirements, with sampling conducted per MIL-STD-1916 or ASQ H1331. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization follows RP001 requirements. The contract specifies a zero percent quantity variance and designates both inspection and acceptance points at the destination. There is no shelf life requirement for this material.
Current-Carrying Wiring Device Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A0-26-T-4611
This solicitation, issued by the Department of Defense Aviation Supply Chain ESOC Buys, is for the procurement of two machine bolts under National Stock Number 5306-00-843-3273. The contract requires delivery within five days after receipt of order and adheres to specific DLA packaging and quality requirements as outlined in the DLA Master List. The solicitation, identified as SPE4A0-26-T-4611, was posted on September 2, 2026, with a response deadline of September 10, 2026. It falls under NAICS code 332722 and includes specific mandates regarding the removal of government identification from any non-accepted supplies. Primary contact for this requirement is Danita Davis.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
TERMINAL JUNCTION B
Solicitation # SPE4A0-26-T-4597
This contract, identified as SPE4A0-26-T-4597, is for the procurement of one Terminal Junction B, identified by NSN 5940-01-536-2769. The requirement is issued by the Department of Defense Aviation Supply Chain ESOC Buys and is destined for the USS Jason Dunham DDG 109. Delivery is required within five days after order, with an original required delivery date of August 28, 2026. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under MIL-STD-2073-1E and marking per MIL-STD-129. A critical prohibition is placed on the intentional use of mercury or mercury-containing compounds in the hardware, preservation, or packaging. Quality assurance will be managed through sampling methods consistent with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334290
New
DIBBS
PARTS KIT, ELECTRONI
Solicitation # SPE4A0-26-T-4465
Solicitation SPE4A0-26-T-4465, issued by DLA Aviation, is for the procurement of one electronic parts kit, identified by NSN 5895016696374 and associated with Teledyne FLIR Unmanned Ground Systems part number 4466341K-240. The required delivery date is July 30, 2026, with a delivery window of five days after the order. The shipment is destined for the USMC/US Government-SOFA Tariff Act at Robertson Barracks in Palmerston, Australia. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to military standards for packaging and marking, specifically MIL-STD-2073-1 Appendix D for kits and MIL-STD-129 for marking. The kit must be delivered in a single cushioned box containing a detailed contents list of all component NSNs, part numbers, and quantities. Quality assurance will be governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Additionally, the provider must comply with CMMC Level 2 self-assessment requirements, the Buy American Act, and the Berry Amendment. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.
Other Communications Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332996
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A0-26-T-4602
This contract is for the procurement of three machine bolts, identified by NSN 5306012678599 and CNH Industrial America LLC part number L113554. The agreement, under solicitation number SPE4A0-26-T-4602, specifies a delivery timeframe of five days after order and a required delivery date of August 27, 2026. Shipping is set as FOB Origin, with the final destination and inspection point located in Latham, New York. The contract mandates strict adherence to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129, with palletization following RP001 guidelines. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Technical and quality requirements are governed by the DLA Master List, and the shipment must be sent via the fastest traceable means, excluding parcel post.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADED
Solicitation # SPE4A0-26-T-4599
This solicitation, numbered SPE4A0-26-T-4599 and issued by the Department of Defense Aviation Supply Chain, is for the procurement of straight headed pins under NSN 5315016584110. The requirement consists of two line items: one unit for delivery to Fort Hood, Texas, and three units for delivery to the Anniston Army Depot in Alabama. Both items must be delivered within five days and are subject to destination inspection and acceptance. The hardware must be manufactured in accordance with the current revision of the applicable part standard, specifically referencing basic drawing 80205 NASM20392 Revision 1. The contract mandates strict adherence to DLA technical and quality requirements, including physical identification and bare item marking per MIL-STD-130N. Sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA procurement requirements. Shipping must be conducted via the fastest traceable means, and the solicitation falls under NAICS code 332618.
Other Fabricated Wire Product Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 8 days
View Details