GAGE, DEPTH, VERNIER

GAGE,DEPTH,VERNIER
GAGE,DEPTH,VERNIER
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CAGE: 19206 US ARMY
PN: 7247996
UI = EA
QUP = 001
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
HIGHER LEVEL CONTRACT QUALITY SYSTEM REQUIREMENT (FAR 52.24611)
APPLIES:
ISO 9001:2008 (TAILORED: DELETE 7.3) OR COMPARABLE SYSTEM.
The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. DI-NDTI-80809
Certificate of Quality Compliance (CoQC) Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If
SPE8E5-27-T-0470
SECTION B
CDRL-COQCCDRLs is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS
FIRST ARTICLE APPROVAL,CONTRACTOR
INSPECTION REQUIRED. FIRST ARTICLE
TESTS AND SAMPLES OF MATERIAL RE
QUIRED FOR TESTS SHALL BE IAW PARA
4.4 AND 4.4.1 OF MIL-I-24768 AND
APPLICABLE SPECIFICATION SHEET (MIL
I-24768, TABLE X, XI, XII FOR FIRST
ARTICLE INSPECTION AND APPLICABLE
SPECIFICATION SHEET FOR REQUIREMENTS
FOR THE ITEM).
52.209-3 FIRST ARTICLE APPROVAL CONTRACTOR TESTING
52.246-2 INSPECTION OF SUPPLIES FIXED-PRICE
252.225-7009 RESTRICTION ON ACQUISITION OF CERTAIN ARTICLES CONTAINING
SPECIALTY METALS (HEAVY-PHOSPHATE / MIL-DTL-16232 / FINISH SERIES 5.3 OF
MIL-STD-171)
PACKAGING IAW SPECIAL PACKAGING INSTRUCTION (SPI)
SPI NUMBER-7247996 DATED # 23 AUG 93, REV A
PRESERVATION: MILITARY
LEVEL OF PACKING: -B-
QUANTITY PER UNIT PACKAGE: -001
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
PALLETIZATION IS REQUIRED IAW DLAI MD00100452 REV B (07/30/2008). HTTP: //WWW.DLA.MIL/LANDANDMARITIME/OFFERS/SERVICES/TECHNICALSUPPORT/LOGISTICS /PACKAGING/PALLETIZATION.ASPX
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
Hazard Communication Standard Notice:
Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities.
SPE8E5-27-T-0470
SECTION B
The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals. As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels.
In accordance with the revised standard after June 1, 2015:
1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government.
2. Suppliers will also be required to submit, to the contracting officer for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government.
3. Finally, suppliers must train their employees on the new safety data sheets, hazardous communication labels, and requirements of 29 C.F.R. 1910.1200.
For more information on SDS, refer to OSHAs website, available at:
https://www.osha.gov/law-regs.html
For information on 29 C.F.R. 1910.1200, refer to the below link:
https://www.osha.gov/dsg/hazcom/index.html
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT DLA DURING "OPEN SOLICITATION ONLY". TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)> FOR EBS SOLICITATIONS USE URL HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
ENGINEERING EXCEPTIONS: THE FOLLOWING ENGINEERING EXCEPTIONS APPLY TO
THIS PROCUREMENT ACTION(S):
1. 7243013: CHANGE MATERIAL BLOCK
FROM: .34C MAX ALLOY STEEL PER ASTM A108
TO: SAE-AISI .34C MAX (4XXX OR 8XXX) ALLOY STEEL BAR PER ASTM A108.
MERCHANT QUALITY AND FREE-MACHINING GRADES NOT ALLOWED.
2. 7243014, 7243162, 7243181, 7243203: CHANGE MATERIAL BLOCK
FROM: STL, CARBON ASTM-A-108
TO: SAE-AISI (10XX) CARBON STEEL BAR PER ASTM A108. MERCHANT QUALITY AND
FREE-MACHINING GRADES ARE NOT ALLOWED.
3. 7243182: NOTE
FROM: MATERIAL TO BE STEEL, CARBON PER ASTM-A-108 OR STEEL, ALLOY PER
ASTM-A-322
TO: MATERIAL: SAE-AISI (10XX) CARBON STEEL BAR PER ASTM A108 OR SAE-AISI
(4XXX OR 8XXX) ALLOY STEEL BAR PER ASTM A322.
4. PD 7247996 CHANGE NSN FROM: 5220-01-259-9104
TO: 5210-01-259-9104
CHANGE METHOD FROM: IA-8(A)
TO: 33
CHANGE STEP 2 FROM: 2
TO: 2(C)
CHANGE STEP 3(B) FROM: MIL-B-117, STYLE 1, TYPE II, CLASS E
TO: MIL-DTL-117, TYPE II, CLASS C
CHANGE STEP 7 FROM: PPP-T-76
TO: ASTM-D1974/D1974M, METHOD B
ADD NOTE C: COMPATIBILITY PROVISIONS OF MIL-I-8574 APPLY.
SPE8E5-27-T-0470
SECTION B
ALL DRAWINGS AND ASSOCIATED DOCUMENTS WITHOUT DISTRIBUTION STATEMENT
<(>,<)>
ADD: DISTRIBUTION STATEMENT A: APPROVED FOR PUBLIC RELEASE; DISTRIBUTION
IS UNLIMITED.
5. DRAWING 7247996
FROM: 19206 ASSY 7247996
MFR 105MM
TO: 19206 ASSY 7247996
CDA-1NUW7
MFR 105MM
6. THE FOLLOWING CLAUSES APPLY TO ALL DOCUMENTS WITHIN THE INSPECTION
DRAWINGS AND DOCUMENTS SECTION OF THE TDPL:
ALL INSPECTION DRAWINGS AND DOCUMENTS ARE DISTRIBUTION A UNLIMITED,
UNLESS OTHERWISE SPECIFIED IN THE TDP.
7. QAP 7309999 REFERENCES WITHIN QAPS
REMOVE QAP 7309999 REFERENCE WITHIN QAPS. QAP 7309999 HAS BEEN
OBSOLETED, DRAWING 7309999 CONTAINS NECESSARY REQUIREMENTS.
8. ADD QAP-APPX-WVA: 19206
TDP Rev B Gen 2 IAW BASIC DRAWING NR 19206 7247996 REVISION NR F DTD 05/14/1980 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 1NUW7 7309998 REVISION NR G DTD 05/16/2017 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE QAP 19206 7243162 REVISION NR B DTD 07/15/1999 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE QAP 19206 7243182 REVISION NR B DTD 07/22/1999 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE QAP 19206 7243013 REVISION NR B DTD 05/08/2008 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19206 7243014 REVISION NR L DTD 06/07/1990 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE QAP 19206 7243014 REVISION NR A DTD 07/15/1999 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE QAP 19206 7243203 REVISION NR A DTD 07/22/1999 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19206 7243013 REVISION NR J DTD 05/08/2008 PART PIECE NUMBER:
SPE8E5-27-T-0470
SECTION B
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19206 7243181 REVISION NR M DTD 06/07/1990 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE QAP 19206 7243181 REVISION NR B DTD 07/22/1999 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE QAP 19206 QAP-APPX-WVA REVISION NR DTD 03/01/2001 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19206 7243202 REVISION NR M DTD 06/07/1990 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE QAP 19206 7243202 REVISION NR A DTD 06/07/1999 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19206 7243165 REVISION NR AF DTD 05/08/2008 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19206 7243182 REVISION NR H DTD 06/07/1990 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19206 7243183 REVISION NR K DTD 06/07/1990 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19206 7243184 REVISION NR M DTD 06/07/1990 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19206 7243203 REVISION NR L DTD 05/30/1975 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19206 7243162 REVISION NR L DTD 06/07/1990 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE QAP 19206 7243165 REVISION NR B DTD 07/15/1999 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19206 7243183 REVISION NR A DTD 07/22/1999 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE QAP 19206 QAP-APPX-WV REVISION NR DTD 06/11/1990 PART PIECE NUMBER:
SPE8E5-27-T-0470
SECTION B
TDP Rev B Gen 2 IAW REFERENCE QAP 19206 7243184 REVISION NR A DTD 07/22/1999 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19206 7243008 REVISION NR J DTD 05/14/1980 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE QAP 19206 7243008 REVISION NR A DTD 07/15/1988 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19206 7243187 REVISION NR J DTD 05/06/1988 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE QAP 19206 7243187 REVISION NR A DTD 07/22/1999 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19206 7243196 REVISION NR R DTD 05/06/1986 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE QAP 19206 7243196 REVISION NR A DTD 07/22/1999 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19206 7247996 REVISION NR A DTD 08/23/1993 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE QAP 19206 7247996 REVISION NR B DTD 07/22/1999 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 19200 7247996 REVISION NR DTD 03/17/2022 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE DRAWING NR 1NUW7 7309999 REVISION NR U DTD 05/16/2017 PART PIECE NUMBER:
TDP Rev B Gen 2 IAW REFERENCE QAP 14153 SQAP-FAT3 REVISION NR DTD 08/26/2025 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE8E5-27-T-0470
SECTION B
PR: 7019095979 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7019095979 0001 EA 27.000
NSN/MATERIAL:5210012599104
DELIVERY (IN DAYS):0286
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:A
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PACKAGING IAW SPECIAL PACKAGING INSTRUCTION (SPI)
SPI NUMBER-7247996 DATED # 23 AUG 93, REV A
PRESERVATION: MILITARY
LEVEL OF PACKING: -B-
QUANTITY PER UNIT PACKAGE: -001
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
SPE8E5-27-T-0470
SECTION B
PR: 7019095979 PRLI: 0001 CONT’D
Need Ship Date:05/09/2027 Original Required Delivery Date:05/11/2027

CONTRACTOR FIRST ARTICLE TEST THE NUMBER OF UNITS SHOWN SIGNIFIES THE
TEST REQUIREMENT. SEE FAR CLAUSE 52.209-3 CITED IN SECTION A OF THIS
SOLICITATION FOR THE ACTUAL QUANTITY REQUIRED.
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 0000000000 EA 1.000
NSN/MATERIAL:0001S00000053
DELIVERY (IN DAYS):0090
THIS LINE ITEM SIGNIFIES THE FIRST ARTICLE TEST REQUIREMENT (FAT). SEE
CLAUSES FOR INFORMATION CONCERNING THE FAT REQUIREMENT. OFFERS THAT DO
NOT CITE A PRICE FOR THIS LINE ITEM SHALL BE EVALUATED UNDER THE
ASSUMPTION THAT THERE IS NO SEPARATE CHARGE FOR THE FAT. IN THE EVENT
THE FAT REQUIREMENT IS WAIVED, NO AWARD WILL BE MADE FOR THIS LINE ITEM.
THE NUMBER OF UNITS SHOWN APPEARS AS “1 EA”. THIS QUANTITY SIGNIFIES
THE TEST REQUIREMENT. OFFERORS WILL FIND THE ACTUAL QUANTITY REQUIRED
BY THE GOVERNMENT FOR THE FAT LINE ITEM PER FAR 52.209-3 OR 52.209-4 IN
SECTION A OF THIS SOLICITATION.
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
Need Ship Date:00/00/0000 Original Required Delivery Date:00/00/0000

SPE8E5-27-T-0470 NSN/Part Number: 5210-01-259-9104 Quantity: 27 EA Purchase Request: 7019095979QTY: 27 Delivery: 286 days ADO