Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

GAGE, PRESSURE, DIAL

Active
SPE4A5-26-T-326ZFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of six pressure dial gages with NSN 6685015659049 under solicitation SPE4A5-26-T-326Z, with a required delivery date of October 12, 2026, and a delivery window of 171 days. The items must be shipped FOB origin with no quantity variance allowed, and inspections and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA’s packaging requirements, including specific preservation methods and marking per MIL-STD-129 with the special code 05 for delicate instruments. All items must be palletized per DLA guidelines and labeled with the designated parcel post address in Tracy, California. Mercury and mercury compounds are strictly prohibited in the gages, their packaging, preservation, and marking, except for functional uses in specific instruments like sensors or controls as permitted by NAVSEA, which must include a secondary containment. Sampling and inspection follow MIL-STD-1916 or an approved zero-based plan with strict zero non-conformances unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. The contract references the DLA Master List of Technical and Quality Requirements for all technical and quality obligations, and the unit of issue is the each (EA) as defined by DoD standards. The prime point of contact is Steven Oliver, and delivery must be completed no later than January 31, 2027.

General Info

Procure six NSN 6685015659049 pressure dial gages, deliver FOB origin by January 31, 2027, no mercury, comply with MIL-STD packaging and inspection standards.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

334513 - Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process VariablesView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-326Z.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
STEVEN OLIVER
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
GAGE,PRESSURE,DIAL
GAGE,PRESSURE,DIAL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
WEKSLER GLASS THERMOMETER CORP 64467 P/N EA243PYPLWBX
ASHCROFT INC 049X3 P/N EA243PYPLWBX
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A5-26-T-326Z
SECTION B
PR: 7017739630 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017739630 0001 EA 6.000
NSN/MATERIAL:6685015659049
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:05 -05 Delicate instrument
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION, PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:01/31/2027 Original Required Delivery Date:10/12/2026
SPE4A5-26-T-326Z NSN/Part Number: 6685-01-565-9049 Quantity: 6 EA Purchase Request: 7017739630QTY: 6 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334513
New
DIBBS
THERMOMETER, SELF-IN
Solicitation # SPE4A5-26-T-325E
The contract concerns the procurement of six self-injecting thermometers with NSN 6685-01-643-7750 under solicitation SPE4A5-26-T-325E, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required FOB origin within 171 days of award, with a firm delivery deadline of January 31, 2027, and no variance permitted in quantity. All units must comply with DLA’s technical and quality requirements referenced in the DLA Master List, including sampling protocols aligned with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes must be verified at levels VII, IV, and II or corresponding AQLs of 0.1, 1.0, and 4.0. Zero non-conformances are required in sampled lots unless otherwise specified. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129 with the special marking code 05 indicating a delicate instrument, and palletization must conform to DLA packaging standards. The product is labeled as RTEMP INSTRUMENT CORPORATION P/N B4T6QPX2256X-C3TSVB and requires no government identification removal. The shipment must be sent to the specified receiving warehouse in Tracy, California, following DLA transportation notes C19 and C20, and packaging must comply with hazardous materials standards where applicable. The unit price is $6.00 per unit, totaling $36.00, with all terms governing inspection and acceptance occurring at the destination.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334513
New
DIBBS
GAGE, PRESSURE, DIAL IND
Solicitation # SPE4A5-26-T-325S
The contract is for the procurement of 45 units of a dial indicating pressure gauge with NSN 6685-01-621-8231 and part number GPC175, issued under solicitation SPE4A5-26-T-325S by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION. The unit price is $45.00, resulting in a total contract value of $2,025.00, with delivery required within 171 days from the contract award date, and the original delivery deadline is October 29, 2026, with a needed ship date of January 31, 2027. Delivery is FOB origin, inspection and acceptance occur at the destination, and no quantity variance is permitted. Packaging must comply with MIL-STD-2073-1E and DLA’s packaging requirements, including specific preservation methods, packaging materials, and marking in accordance with MIL-STD-129, with a special designation for “Delicate instrument.” Mercury or mercury-containing compounds are strictly prohibited in any component, preservation, packaging, or labeling, except for specific functional items like batteries, lamps, or sensors as defined by NAVSEA, which must include a secondary containment and meet NAVSEA 5100-003D standards. All items must be delivered to the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002, with transportation handled per DLA procedural notes C19 and C20. The contract incorporates technical and quality requirements referenced from the DLA Master List, with the applicable revision determined by the solicitation or award date depending on acquisition size.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334513
New
DIBBS
TRANSDUCER, MOTIONAL
Solicitation # SPE4A5-26-T-329A
The contract pertains to the procurement of a Transducer, Motional Pickup with NSN 6695-01-615-1535 and part number TSD011-020, requiring a single unit to be delivered within five days of contract award under solicitation SPE4A5-26-T-329A. Delivery is FOB destination to a U.S. military facility in Yokosuka, Japan, with no variance allowed in quantity and inspection and acceptance occurring at origin. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, which override any conflicting standards including ASTM D3951. Packaging must adhere to MIL-STD-129 and DLA Packaging Requirements for Procurement, with all items marked per RQ017 and subject to the removal of government identification if rejected. Sampling shall follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs based on criticality. The unit of issue is each, and the procurement is subject to defense information protection under RD002. Delivery must meet the original required date of July 28, 2026, with no ship date provided, and transport details follow DLA procedural notes C19 and C20. Contact for inquiries is Aprile Corley at DLA.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334513
New
DIBBS
INDICATOR, ELECTRICAL T
Solicitation # SPE4A5-26-T-324N
The contract specifies the procurement of an Electrical Tachometer Indicator with NSN 6680-01-503-9443 and part number MR49W040ATVVH, under solicitation SPE4A5-26-T-324N. Four units are required at a unit price of $4.00, for a total price of $16.00, with delivery due in 171 days to the DLA Distribution San Joaquin facility in Tracy, California. All items must comply with DLA packaging requirements per MIL-STD-2073-1E and marking standards per MIL-STD-129, including special delicate instrument labeling. The product is not on a Qualified Products List and must be free from intentional mercury or mercury compounds, except for permitted uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents, with portable mercury-containing devices requiring a secondary containment boundary per NAVSEA 5100-003D. Packaging, preservation, and marking are strictly prohibited from containing mercury or mercury compounds. Sampling and inspection follow zero-defect standards using MIL-STD-1916 or comparable plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. All unspecified attributes are treated as major. The manufacturer may use attribute or variable inspection methods under MIL-STD-1916, and while MIL-STD-105/ASQ Z1.4 may determine sample size, acceptance requires zero non-conformances unless otherwise contracted. The technical and quality requirements are derived from the DLA Master List, and the TDP revision A Gen 1 must align with MIL-DTL-16034B. Delivery is FOB origin with no variance allowed in quantity.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334513
New
DIBBS
THERMOMETER, SELF-IN
Solicitation # SPE4A5-26-T-328R
The contract is for 137 self-indicating bimetallic thermometers, identified by part number 1592-00088 and NSN 6685015050892, classified as a commercial item and designated as a critical application item. The thermometers must comply with stringent technical and quality requirements referenced from the DLA Master List, including specific inspection, packaging, and marking standards such as MIL-STD-129 and MIL-STD-2073-1E, with special marking indicating the item as a delicate instrument. Sampling for acceptance must follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise stated, with unspecified attributes treated as major. The item is subject to tailored higher-level quality requirements and packaging standards, with no requirement for unique item identification per the service customer’s request. All manufacturing and delivery must meet DLA’s procurement packaging requirements, and the product must be shipped FOB origin with a 147-day delivery timeline to DLA Distribution Jacksonville, Florida. The contract is issued under solicitation SPE4A5-26-T-328R, with responses due by August 12, 2026, and the required delivery date set for August 4, 2026. Approved suppliers include Rochester Sensors LLC, Sikorsky Aircraft Corporation, and Triman Industries Inc. The NAICS code is 334513, and the contracting office is under the Department of Defense’s ASC Supplier OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334513
New
DIBBS
GAGE, DIFFERENTIAL, D
Solicitation # SPE4A5-26-T-328N
This contract specifies the procurement of a differential dial indicating gage with part number 19NCXXX0X10E1BXAXX05 and NSN 6685-01-088-0546, for a quantity of four units to be delivered within 33 days from the contract award. Delivery is FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination warehouse in Tracy, California. All items must comply with MIL-STD-2073-1E packaging standards, marked per MIL-STD-129 with the special marking code 05 indicating a delicate instrument, and palletized according to DLA packaging requirements. The gage is designated as a critical application item and must not contain mercury or mercury compounds except under specific exceptions for batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents, with portable devices containing mercury requiring shockproof construction and a secondary containment barrier as per NAVSEA 5100-003D. Sampling and quality verification adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are classified with corresponding verification levels or AQLs. Technical and quality requirements are governed by the DLA Master List, with the revision in effect on the solicitation issue date controlling. Packaging, preservation, and shipping must exclude mercury entirely, and hazardous material shipping follows IP025 and IP056 directives. The contract is issued under solicitation SPE4A5-26-T-328N with a response deadline in August 2026 and an original delivery requirement of November 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334513
New
DIBBS
LINE SENSE
Solicitation # SPE4A5-26-T-324C
The contract pertains to the procurement of one unit of a Commercial Off the Shelf (COTS) item identified as LINE SENSE with NSN 6685015313243 and part number 255D0305-509, supplied by ROHR INC, GE ENGINE SERVICES DISTRIBUTION L.L.C., and GENERAL ELECTRIC COMPANY. The item is to be delivered in a single unit with zero variance in quantity, shipped FOB origin, and inspected and accepted at the destination. Packaging must comply with MIL-STD-2073-1E and marking must adhere to MIL-STD-129 with no special marking requirements, while palletization follows DLA’s RP001 packaging standards. The delivery timeline is set for 171 days from the solicitation date, with the original required delivery date of July 15, 2027, and a need ship date of January 31, 2027. The item will be delivered to DLA Distribution Warner Robins at Robins Air Force Base, Georgia, under contract SPE4A5-26-T-324C. Transportation logistics are governed by DLA procedural notes C19 and C20, and the unit of issue is each (EA). The contract was issued under a federal solicitation by the Department of Defense with a NAICS code of 334513, and the primary point of contact is Donetta Nelson at DLA.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334513
New
DIBBS
COMPARATOR, COLOR
Solicitation # SPE2DH-26-T-5767
The comparator is a color-matching device designed for use with COLILERT QUANTI-TRAY systems to distinguish between borderline positive and negative results through visual comparison of yellow fluorescence thresholds. It is a 51-well tray filled with a proprietary borderline yellow and fluorescing medium to ensure accurate interpretation of test outcomes. The item is identified by NSN 6630-01-506-2252 and is being procured under solicitation SPE2DH-26-T-5767 for a single unit, with delivery required within 20 days of award. The product is subject to strict shelf-life requirements, mandating a non-extendable 12-month lifespan from the date of manufacture, with no more than one month elapsed between manufacturing and government delivery. Labeling must adhere to the latest version of Medical Marking Standard No. 1, including clear indications of manufacture date, expiration date, and contract or lot number, replacing all prior references to MIL-STD-129. Packaging must comply with commercial standards, protect contents from damage, and ensure safe, cost-effective transport to Dover AFB, with all markings and packaging conforming to DLA’s specified medical packaging requirements. The contract incorporates technical and quality requirements from the DLA Master List, includes provisions for handling covered defense information, and follows DLA packaging and removal guidelines for non-accepted supplies.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 4 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334513
New
DIBBS
TRANSMITTER, LIQUID
Solicitation # SPE4A6-26-T-11ZC
This contract pertains to the procurement of six liquid transmitters under NSN 6680015039350 and part number XM-815 from SETRA SYSTEMS, INC., with a total quantity of six units to be delivered FOB origin within 171 days, no later than March 10, 2027. Delivery is required to the designated receiving warehouse in Tracy, California, with inspection and acceptance occurring at the destination. The items must comply with MIL-STD-2073-1E for preservation and packaging, adhere to MIL-STD-129 for marking, and conform to DLA packaging requirements, including palletization standards. No special marking is required, and the packaging must exclude any mercury or mercury compounds in preservation, packaging, or labeling materials. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware or its direct contact, except for specific functional applications such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical reagents explicitly authorized by NAVSEA; in such cases, portable devices must be shock-proof and include a secondary containment barrier per NAVSEA 5100-003D. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and sampling inspections must follow MIL-STD-1916 or an equivalent zero-based plan with verification levels assigned according to attribute criticality, or zero non-conformances if using MIL-STD-105/ASQ Z1.4. The contractor must also meet CMMC Level 2 self-assessment requirements and ensure physical identification of bare items. All units are subject to a zero variance in quantity, and the solicitation was issued under a Women-Owned Small Business set-aside with a NAICS code of 334513.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334513
New
DIBBS
THERMOWELL
Solicitation # SPE4A5-26-T-325K
This contract is for the procurement of 14 thermowells identified by NSN 6685-01-554-6150 and part number 077-09367-000, issued under solicitation SPE4A5-26-T-325K by the Department of Defense through the ASC Supplier Oper OEM Division. The delivery is required within 171 days of award, with FOB origin terms, and must be shipped to the designated receiving warehouse in Tracy, California. The unit price is $14.00 per item, totaling $196.00, with zero variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 standards, including specific preservation, wrapping, and container codes, and must be palletized per DLA packaging requirements. All items must be marked according to the specified guidelines with no special marking required. The contractor is prohibited from intentionally adding mercury or mercury-containing compounds to the thermowells or their contact surfaces, except for approved functional uses such as batteries, instruments, or sensors as defined by NAVSEA, with portable mercury-containing devices requiring shock-proof construction and secondary containment per NAVSEA 5100-003D. Cybersecurity compliance is mandated at CMMC Level 2 through a self-assessment, and technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the contract. The original required delivery date was December 23, 2026, with a need ship date of January 31, 2027.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334513
New
DIBBS
TRANSMITTER, LIQUID
Solicitation # SPE4A5-26-T-323Y
The contract pertains to the procurement of four liquid transmitters identified by NSN 6680014543049 and part number 74-580056-289, sourced from approved manufacturers Simmonds Precision Products Inc and The Boeing Company. The item is classified as a critical application with specific technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I codes, which override any conflicting standards. Cybersecurity compliance at CMMC Level 2 is required, and the item is subject to tailored higher-level quality requirements including configuration change management and variance requests. Item Unique Identification is not mandated per service customer request, with DFARS 252.211-7003(c)(1)(i) applicable. Sampling must follow MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and acceptance requires zero non-conformances unless otherwise specified. Packaging must adhere to ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization meeting DLA packaging standards, while physical identification and bare item marking requirements are enforced. Delivery is FOB origin to DLA San Joaquin in Tracy, California, with a 171-day delivery window, no quantity variance allowed, and inspection and acceptance occurring at destination. The contract specifies a unit price of $4.00 per unit for a total value of $16.00, with a required ship date of January 31, 2027, and original delivery deadline of March 3, 2027. Transportation and shipping logistics are governed by DLAD Proc Notes C19 and C20, and all documentation must comply with DLA procurement protocols.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334513
New
DIBBS
GAGE, PRESSURE, DIAL INDICATING
Solicitation # SPE4A6-26-R-XC31
The contract pertains to the procurement of one pressure dial indicating gauge with NSN 6685-01-165-8961, subject to strict technical and packaging requirements mandated by the Defense Logistics Agency. The item is designated as a critical application component, specifically superseding an earlier part number due to operational failures on CH-47 helicopter hydraulic systems near the APU. All supplies must comply with DLA’s Master List of Technical and Quality Requirements, with sampling and inspection governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances unless otherwise stated; critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, with AQLs of 0.1, 1.0, and 4.0. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, including special marking code 05 for delicate instruments, and palletization must follow DLA’s RP001 packaging guidelines. The item must be delivered FOB destination within 75 days after award, with firm fixed pricing and no quantity variance permitted. Inspection and acceptance occur at destination, and hazardous material shipping must comply with IP025 standards. The solicitation is a total small business set-aside under FAR 19.5, with responses due by August 18, 2026, and the point of contact is Christa Davis of the Department of Defense’s ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 332119
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A5-26-T-328Q
The contract is for the procurement of two BUSHING, SLEEVE items with NSN 5365-01-729-5733 and part number BACB28AP12Z059, issued under solicitation SPE4A5-26-T-328Q. Delivery is required within 127 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and no variance allowed in quantity. The item is classified as a critical application component for Boeing and must comply with stringent technical and quality requirements referenced from the DLA Master List, including configuration change management, supply chain traceability per DLA Procurement Note C03, and FAA-specific provisions such as bare item marking and airworthiness certification. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with preservation methods specified for dry conditioning and no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances mandated unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. The supplier must retain supply chain documentation and ensure all materials meet FAA airworthiness standards, as outlined in DFARS 252.211-7003, despite the absence of unique identification requirements. Transportation and shipping logistics are governed by DLA Procurement Notes C19 and C20, and all documentation must align with the Technical Data Package and associated Contract Data Requirements Lists. The item is subject to the DLA Packaging Requirements and must be delivered on or before December 18, 2026. The contract includes mandatory compliance with quality assurance provisions, and nonconforming supplies must be processed per RQ011 guidelines regarding removal of government identification. All technical specifications referenced are incorporated by link to the DLA eProcurement portal, and the procurement is conducted under the DoD-authorized unit of issue with a unit price and total price specified for the two-piece order.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
SHIM
Solicitation # SPE4A5-26-T-323P
The contract pertains to the procurement of five units of a specific shim identified by NSN 5365-01-493-6230 and part number 212-011-731-101, supplied by BELL TEXTRON INC with CAGE code 97499. Delivery is required FOB origin within 171 days of contract award, with no tolerance for quantity variance. Inspection and acceptance both occur at the destination facility. Packaging must comply with MIL-STD-2073-1E, including specified preservation methods, materials, and unit containers, while marking adheres strictly to MIL-STD-129 and DLA packaging requirements, with no special marking codes applied. Unit identification is not required per customer request under DFARS 252.211-7003(c)(1)(i). Acceptable sampling follows Sikorsky Corporation’s Alternate Sampling Plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the same address used for freight shipping. The required ship date is January 31, 2027, with an original delivery requirement of October 15, 2027. Technical and quality requirements referenced are governed by the DLA Master List, with applicable revisions determined by the solicitation or award date depending on acquisition scale. The contract is issued under solicitation SPE4A5-26-T-323P, with a unit price of $5.00 per piece for a total value of $25.00.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
WIRE ROPE ASSEMBLY,
Solicitation # SPE4A5-26-T-325N
The contract is for the procurement of 20 single-leg wire rope assemblies with NSN 4010-01-611-5048 and part number 6898106-107, supplied by Mazzeolla Lifting Technologies, Inc. Delivery is required FOB origin within 171 days, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, and marking must adhere to MIL-STD-129 without any special codes. Palletization follows DLA standards, and preservation methods are strictly controlled with no mercury or mercury-containing compounds permitted in preservation, packaging, or marking materials. The item must meet all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, applying zero non-conformances unless otherwise stipulated. Mercury is prohibited except in specified exempted applications such as batteries, fluorescent lights, and certain instruments, with portable mercury-containing devices requiring shockproof design and a secondary containment barrier. All deliveries must be sent to the DLA Distribution facility in New Cumberland, PA, and the contract is subject to transportation guidelines outlined in DLAD Proc Notes C19 and C20. The original required delivery date is May 30, 2027, with a needed ship date of January 31, 2027. The solicitation, issued under SPE4A5-26-T-325N, was posted August 4, 2026, with a response deadline of August 12, 2026, and falls under NAICS code 332618 as a federal procurement managed by the Department of Defense’s ASC Supplier Oper OEM Division.
Other Fabricated Wire Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
STAKE, GUY
Solicitation # SPE4A5-26-T-326K
STAKE, GUY is a procurement contract issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION under solicitation number SPE4A5-26-T-326K, requiring delivery of 67 units of item NSN 4030-01-710-7034 with a unit price of $67.00, totaling $4,489. The contract mandates strict adherence to DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, with all items palletized and labeled according to specified guidelines. Inspection and acceptance occur at the destination, with no variance allowed in quantity. Delivery is due within 171 days of award, with an original required delivery date of March 30, 2027, and a needed ship date of January 31, 2027. The item must be delivered FOB origin to the receiving warehouse in Tracy, California, with transportation governed by DLAD PROC NOTES C19 and C20. The contract enforces a zero-defect sampling standard, requiring compliance with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively, and any unspecified attributes are treated as major. Acceptance requires zero non-conformances unless otherwise directed. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment, and all government identification must be removed from non-accepted supplies. The seller is subject to all DLA directives, including unit of issue specifications and packaging standards, with no exceptions permitted. Contract performance is monitored via the point of contact Hien-Van Trinh, and all documentation must reference the authorized DLA unit of issue as defined in official DoD guidelines.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
STAND, COMPRESSED GA
Solicitation # SPE4A5-26-T-325J
The contract is for the procurement of 18 units of a commercial off-the-shelf stand designed for compressed gas cylinders, identified by part number G-600 and NSN 4920-01-587-5435, sourced from First Safety Corporation Inc. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951 packaging standards. Packaging and labeling must follow MIL-STD-129, and palletization must adhere to DLA Packaging Requirements for Procurement (RP001). Delivery is FOB origin with a 171-day lead time, and inspection and acceptance occur at the destination. The quantity is fixed with no variance allowed. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the required ship date set for January 31, 2027, and the original delivery date as July 24, 2027. Each unit is priced at $18.00, totaling $324.00 for the order, under contract SPE4A5-26-T-325J. Transportation details are governed by DLAD Proc Notes C19 and C20, and the unit of issue is each (EA). All government identification must be removed from non-accepted supplies, and compliance with the DLA Master List controls the applicable revision level based on the solicitation or award date.
Other Electronic Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
ADAPTER, GAGE
Solicitation # SPE4A5-26-T-321C
The contract pertains to the procurement of an Adapter, Gage with NSN 6685-00-274-5533 and part number 421371-1, manufactured by Enerpac Tool Group Corp under specification SPE4A5-26-T-321C. Nine units are required at a unit price of $9.00, with delivery due in 171 days FOB origin to DLA Distribution San Diego. The item is classified as a critical application item requiring physical identification and compliance with MIL-STD-129 marking standards. Packaging must adhere to MIL-STD-2073-1E, with specific preservation methods and unit containment codes, and palletization must meet DLA’s packaging requirements. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under sampling plans specified by MIL-STD-1916 or equivalent zero-based systems, unless otherwise designated. Attributes are assigned verification levels or AQLs per defined standards, and unspecied attributes are treated as major. Mercury and mercury-containing compounds are strictly prohibited except in exempted functional components such as batteries or instrument sensors, which must include secondary containment as per NAVSEA 5100-003D. Configuration changes require formal engineering change proposals or variance requests, and government identification must be removed from non-accepted supplies. Covered defense information provisions apply, and the contract explicitly excludes Item Unique Identification per DFARS 252.211-7003(c)(1)(i). The solicitation opened on August 4, 2026, with responses due August 12, 2026, and performance is directed under DLA’s authorized unit of issue system with full alignment to technical and quality requirements referenced from the DLA Master List.
Other Measuring and Controlling Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, PLATE
Solicitation # SPE4A5-26-T-328K
The contract pertains to the procurement of 24 plain plate nuts with NSN 5310-00-241-0092 under solicitation SPE4A5-26-T-328K, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required within 115 days after award, with responses due by August 12, 2026. The item has no shelf life requirement and does not require Unique Item Identification as specified by the Service customer, in accordance with DFARS 252.211-7003(c)(1)(i). Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless superseded by an amendment. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Inspection and acceptance occur at origin, and government identification must be removed from non-accepted supplies. Bare items must be physically marked according to RQ017, and measuring and test equipment used must meet specified standards. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major. Zero non-conformances are required unless otherwise stated. Data supporting this procurement is deemed proprietary or insufficient for competitive bidding. The place of performance is Cherry Point, North Carolina, 28533-5040, with Jaelyn Buford listed as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
BATTERY CHARGER, AIR
Solicitation # SPE4A5-26-T-326V
The contract is for the procurement of six battery chargers, air model, identified by NSN 4920-01-498-2543 and part numbers 4159-MIL and CA 1550 MIL from Lamar Technologies LLC, with delivery required within 171 days under a total small business set-aside. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must comply with MIL-STD-129 and DLA Packaging Requirements, including palletization per RP001. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are classified with verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. The item is designated as a critical application requiring strict configuration control and physical identification, and non-approved sources must obtain source approval from the design control activity with technical data packages submitted with their offer. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. The purchase request number is 7017739882, unit of issue is EA, quantity is fixed at six units with zero variance allowed, and the required delivery date is January 31, 2027, with an original target of January 26, 2027. All markings, labeling, and documentation must adhere to applicable DoD and DLA directives, and transportation follows DLAD procedural notes C19 and C20.
Other Electronic Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334514
New
DIBBS
TRANSMITTER, LIQUID QUA
Solicitation # SPE4A5-26-T-325X
The contract specifies the procurement of four liquid quantity transmitters under solicitation SPE4A5-26-T-325X, with a delivery deadline of 171 days after order. The item, identified by NSN 6680-01-666-8749, is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Packaging, identification, and documentation must comply with specific DLA standards including RP001, RQ011, RQ017, and RC001, while sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated. Configuration changes require formal engineering change proposal procedures, and cybersecurity compliance mandates CMMC Level 2 certification for third-party assessors. Technical data associated with the item is subject to ITAR or EAR export controls, prohibiting unauthorized disclosure to foreign persons regardless of location, with distribution restricted to contractors who hold US/Canada Joint Certification Program status, have completed mandatory DLA training, and received explicit approval. Item Unique Identification is waived per customer request under DFARS 252.211-7003(c)(1)(i). The contract is managed by the Department of Defense’s ASC Supplier Oper OEM Division, with performance located in New Cumberland, Pennsylvania, and primary point of contact Hien-Van Trinh.
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SHEET SPRING
Solicitation # SPE4A5-26-T-323A
This contract is for the procurement of 951 units of a nut, sheet spring, identified as a commercial off-the-shelf item under part number 03A111-3-1 and its alternate variants including 13100009-1 and 132A11144-7-3, sourced from multiple approved suppliers such as Northrop Grumman Systems Corporation, Republic Fastener Mfg. Corp., GE Engine Services Distribution, LLC, STE MRAS, LLC, and The Monadnock Company. The item is classified as a critical application component and is not required to have unique item identification, in accordance with DFARS 252.211-7003(c)(1)(i). The National Stock Number is 5310-01-331-8030, with a unit price of $951.00, resulting in a total contract value based on the agreed quantity. Delivery is required within 171 days, with shipment to be made FOB origin under strict packaging standards including MIL-STD-2073-1E and MIL-STD-129 marking requirements, and palletization per DLA’s RP001 packaging guidelines. The item is designated for delivery to the DLA Distribution Depot in Tinker AFB, Oklahoma, with no tolerance for quantity variance. The contract does not require special marking and mandates that all units be packaged and labeled in full compliance with federal packaging and transportation regulations. The procurement is part of a HUBZone Set-Aside solicitation, with the NAICS code 332722 indicating manufacturing of screw, nut, and bolt products. The ordering activity is the ASC Supplier Oper OEM Division under the Department of Defense, with the solicitation issued under reference SPE4A5-26-T-323A. The original required delivery date is August 16, 2027, with a need ship date of January 31, 2027, and the point of contact for logistics inquiries is Donetta Nelson. Transportation logistics follow DLA Procurement Notes C19 and C20, and all units must be delivered in accordance with the DoD-authorized unit of issue as defined in the official DLA documentation.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
ADAPTER ASSEMBLY, COMPA
Solicitation # SPE4A5-26-T-321S
This contract specifies the procurement of an Adapter Assembly, Comparator, identified by NSN 6685-00-934-8642 and part number 3460-108-0120, with a quantity of four units. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revision control based on the solicitation or award date depending on the acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including marking per MIL-STD-129 with no special markings required. The item is designated as a Critical Application Item, and mercury or mercury-containing compounds are strictly prohibited in any hardware, preservation, packaging, or marking materials except for specific functional applications such as batteries, fluorescent lights, sensors, or chemical reagents as defined by NAVSEA, with portable devices containing mercury requiring shock-proof construction and a secondary containment boundary. Sampling for inspection follows MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and only zero non-conformances are acceptable unless otherwise stated. Delivery is FOB origin, with inspection and acceptance occurring at destination, and the item must be delivered within 171 days from the award date with zero tolerance for quantity variance. The destination is the DLA Distributor San Joaquin warehouse in Tracy, CA, with shipping details and transportation governed by DLAD Proc Notes C19 and C20. The original required delivery date is January 18, 2027, with a need ship date of January 31, 2027, and the contract was solicited under SPE4A5-26-T-321S with a response deadline of August 12, 2026.
Other Measuring and Controlling Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details