Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

GAGE, PRESSURE, DIAL IND

Active
SPE4A5-26-T-338CFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 20 pressure dial indicating gages with NSN 6685-01-463-2970 under solicitation SPE4A5-26-T-338C, with delivery required within 86 days of award. The item is subject to stringent quality and technical requirements referenced from the DLA Master List, including tailored higher-level quality provisions applicable to both manufacturers and non-manufacturers, and mandates sampling in accordance with MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified. Attributes are classified with verification levels or AQLs of VII, IV, and II for critical, major, and minor characteristics respectively, with unspecified attributes treated as major. Inspection and acceptance must occur at the origin, and all technical data associated with the item is controlled under export regulations, either ITAR or EAR, restricting disclosure to foreign persons regardless of location. Compliance with DFARS 252.225-7048 is required, and only contractors with approved US/Canada Joint Certification Program status, completion of DOD export control training, and DLA authorization may access the controlled technical data. Cybersecurity requirements mandate CMMC Level 2 certification for third-party assessors, and physical identification and marking of the item must conform to RQ017 standards. Government identification must be removed from non-accepted supplies per RQ011, and covered defense information is governed by RD002. The place of performance is Tracy, California, and the primary point of contact is Jalon Lynch with the Department of Defense.

General Info

Procure 20 pressure gages, NSN 6685-01-463-2970, deliver in 86 days, zero-defect sampling, ITAR/EAR controlled, CMMC Level 2, Tracy, CA.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

334512 - Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance UseView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A5-26-T-338C for DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
Jalon Lynch
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
GAGE,PRESSURE,DIAL INDICATING
GAGE,PRESSURE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
SPE4A5-26-T-338C
SECTION B
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 6685-01-463-2970 Quantity: 20 EA Purchase Request: 7017409321QTY: 20 Delivery: 86 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334512
New
DIBBS
TESTER, DIFFERENTIAL
Solicitation # SPE4A6-26-T-14TA
The contract specifies the procurement of one unit of a Differential Pressure Tester with NSN 6685-00-408-1386 and part number 09ABXXX0400A1AXXXX02, sourced from Cameron Energy Services, CAGE code 05991. Delivery is required FOB origin within 242 days of contract award, with no variance allowed in quantity, and both inspection and acceptance occur at the manufacturer’s origin. The item must comply with stringent quality and technical requirements referenced from the DLA Master List, including MIL-STD-1916 or ASQ H1331 sampling plans with zero non-conformances expected unless otherwise stated, and attributes are to be classified with verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization must follow DLA packaging guidelines. Mercury or mercury-containing compounds are strictly prohibited in the product, its preservation, packaging, and marking, except for functional uses such as in batteries, fluorescent lamps, sensors, or instruments specified by NAVSEA, which must be shockproof with secondary containment. The unit of issue is each, and the delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania. The solicitation was issued on August 10, 2026, with responses due by August 18, 2026, under NAICS code 334512, and the primary point of contact is Briana Covington.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334512
New
DIBBS
COTS Transmitter Supply and ComplianceThe contract requires the supply, packaging, labeling, and delivery of a commercial off-the-shelf transmitter unit identified by Deutz Corp part number 4213210 and NSN 6685016811442, ensuring full compliance with the DLA Master List and all federal standards for packaging, inspection, and hazard communication. The item must be provided in accordance with military and federal regulatory requirements, with no deviations permitted in packaging or labeling procedures to maintain interoperability and safety across defense logistics systems. Delivery is to be made to Fort Hood, Texas, and the contractor must adhere to all applicable federal specifications governing the handling and transportation of electronic equipment. This subcontract is solicited under NAICS code 334512, indicating it pertains to the manufacturing of communications equipment, and is issued by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense. The solicitation was posted on August 9, 2026, with responses due by August 17, 2026. Participation is open without set-aside restrictions, and interested parties must respond through the DIBBS portal using the provided reference number SPE4A526T336Z. All units must be fully functional, properly documented, and ready for immediate integration into existing defense supply chains upon delivery.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
DIBBS
Manufacturing of Thermostatic Switch (NSN: 5930002009325)
ELECTRICAL DEVICES DIV

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 334512
New
DIBBS
CALIBRATOR, TEMPERAT
Solicitation # SPE4A5-26-T-336J
The contract pertains to the procurement of one unit of a Fluke Electronics Corp temperature calibrator, identified by part number 9142-A-156 and NSN 6685-01-718-0114, under solicitation SPE4A5-26-T-336J. Delivery is required within 20 days after delivery order, with FOB origin terms placing responsibility on the contractor to deliver the item to the designated origin point, though inspection and acceptance are to occur at the destination location: USNS HECTOR A CAFFERATA (ESB-8) at 8511 Kerns Street, Dock 5, San Diego, CA 92154. The item must be shipped by traceable means, explicitly prohibiting parcel post. Packaging must conform to MIL-STD-2073-1E, with unit and intermediate containers designated as E5, preservation method CLNG/DRY:1, packaging code U, and no special preservation or wrap materials required. Marking and labeling are governed by MIL-STD-129, requiring a 2D Data Matrix barcode for item identification, with no special marking code applied. Physical identification of the bare item must comply with RQ017, and hazardous materials must be labeled per 29 CFR 1910.1200. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required in the sample lot unless otherwise specified; attributes not defined in drawings are treated as major with an AQL of 1.0. The contract includes numerous FAR and DFARS clauses covering equal opportunity, trafficking prevention, employment eligibility, sustainable products, hazardous material safety, cybersecurity safeguards, changes, default, subcontracting, inspection, payment processing via WAWF, electronic submission requirements, and prohibitions on certain materials such as hexavalent chromium and items from Communist Chinese military companies. Pricing is not explicitly listed in the solicitation, but historical data indicates a unit cost of $7,225. The contract is a fixed-price type, with no option quantities or ranges specified, and award is contingent on technical acceptability and compliance with all quality, packaging, marking, and regulatory requirements. Offerors must submit electronically through DIBBS, and all compliance documentation, including representations of small business status, UEI and CAGE codes
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
DIBBS
TRANSMITTER, TEMPERA
Solicitation # SPE4A5-26-T-336Z
The contract pertains to the procurement of one unit of a Transmitter, Tempera, identified by NSN 6685-01-681-1442 and manufacturer part number 4213210 from Deutz Corporation, classified as a commercial off the shelf item. Delivery is required within five days of award, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at the origin, and the item is designated as a critical application item, subject to tailored higher-level quality requirements and specific documentation protocols for source approval. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required; palletization follows DLA packaging standards, and the unit must be shipped by the fastest traceable means, excluding parcel post. The delivery destination is the Logistics Supply Warehouse at Fort Hood, Texas, with identical shipping and mark-for addresses. The contract is issued under solicitation SPE4A5-26-T-336Z with a required delivery date of August 3, 2026, and references compliance with DLA’s Master List of Technical and Quality Requirements, incorporating specific R and I numbers that define performance and quality criteria. The unit of issue is each, and the price is listed but not detailed in the provided data. Technical and quality specifications are governed by the DLA Master List revision in effect on the solicitation issue date, and all documentation and testing must align with RT001 and RQ001 requirements, including the use of calibrated measuring and test equipment. The point of contact for the solicitation is Jamie Bonda of the ASC Supplier Operations OEM Division, and the contract falls under NAICS code 334512 for electronic component and product manufacturing. Government-identified controls and internal tracking codes are included for administrative and logistics purposes only.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE4A6-26-T-14NX
This contract specifies the procurement of a dial pressure gauge identified by NSN 6685010908880 and piece part number SG4NN60PWCANA, with a requirement for 38 units to be delivered within 265 days FOB origin. The item is classified as a critical application and must comply with MIL-G-18997E and associated technical data package revisions, with first article testing required from the contractor. Packaging must conform to MIL-STD-2073-1E and DLA-specific requirements including special marking code 05 for delicate instruments and MIL-STD-129 for labeling, with no tolerance for quantity variance. Inspection and acceptance occur at origin, and all items must be packaged and palletized per DLA guidelines with unit packaging details including E5 containers and no cushioning material. The contract incorporates a comprehensive set of DLA technical and quality requirements identified by R and I numbers, including zero-defect sampling under MIL-STD-1916 or equivalent, with critical, major, and minor attributes assigned strict verification levels or AQLs. Mercury and mercury-containing compounds are strictly prohibited except in specified exempted applications such as functional batteries, fluorescent lights, weapon systems, or naval-referenced reagents, and any exempted mercury-containing portable items must include a secondary containment and be shockproof per NAVSEA 5100-003D. Measuring and test equipment must be calibrated and compliant, and government identification must be removed from non-accepted supplies. The solicitation is a total small business set-aside under NAICS 334512, with performance managed by the Department of Defense’s ASC Commodities Division and point of contact John Schaefer.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
DIBBS
SWITCH, THERMOSTATIC
Solicitation # SPE7M8-26-T-5918
The contract is for the procurement of 29 thermostatic switches with NSN 5930-00-200-9325 and part number M24236/15-450, governed by military specifications MIL-PRF-24236E and MIL-PRF-24236/15L, with a required delivery in 165 days under FOB origin terms. The item is classified as a critical application and is listed on a Qualified Products List, mandating compliance with all referenced technical and quality standards from the DLA Master List, which supersedes commercial packaging standards like ASTM D3951. Packaging must follow MIL-STD-129 labeling and RP001 DLA packaging requirements, with hazardous material handling governed by FED-STD-313 and TQ requirement IP025 if applicable. Use of ozone-depleting substances is strictly prohibited unless written approval from the contracting officer is obtained, and this prohibition overrides any conflicting specification but does not reduce product performance expectations. Cybersecurity requirements include CMMC Level 2 self-assessment compliance and adherence to covered defense information protocols. The item must be delivered to the specified DLA warehouse in Tracy, CA, with no variance allowed in quantity. The contract is issued under solicitation SPE7M8-26-T-5918, with a response deadline in August 2026 and a required ship date of February 2, 2027, and original delivery due by January 26, 2029. All deliveries must align with DLA’s authorized unit of issue and transportation guidelines, and contact for inquiries is Dondiego Boler at the Department of Defense’s Electrical Devices Division.
ELECTRICAL DEVICES DIV

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 334512
New
Federal
Assorted Mass Flow Controllers
Solicitation # RP481134
Brookhaven Science Associates (BSA), operating under the U.S. Department of Energy, is soliciting quotations for assorted mass flow controllers under solicitation number RP481134, with a response deadline of August 20, 2026. The required items include specific models of EL-FLOW Prestige FG-201CS mass flow controllers in various gas configurations—helium, nitrogen, and carbon dioxide—as well as auxiliary components like RS485 accessory kits and cable T-part shut-off valves. Offerors must provide a detailed quotation including applicable lead times, itemized pricing with all available discounts applied to secure the best possible rate for BSA, and must comply with strict pricing requirements: all costs—including freight, tariffs, packaging, handling, and incidental charges—must be embedded within the unit price, as the resulting firm fixed price purchase order will not contain separate line items for additional fees. For items under 150 lbs, international shipping may be facilitated via BSA’s FedEx account, with weight disclosed; for heavier items or when all-inclusive pricing is unattainable, Brookhaven National Laboratory must be named as the Importer of Record under DAP Incoterms, using BSA’s designated freight forwarder. Quotations must include the ECCN and HTS code for each item, the country of origin, the Unique Entity Identifier (UEI), and a published price list if available. Award will follow a lowest price technically acceptable (LPTA) approach, prioritizing the lowest evaluated price from responsive and responsible offerors who meet all technical and administrative criteria. Pricing must remain valid for at least 60 days post-deadline, and submissions are to be made via an electronic portal; late proposals will be considered only if determined to be in BSA’s best interest. The contract enforces strict compliance with numerous Federal Acquisition Regulation (FAR) clauses, including restrictions on gratuities, contingent fees, and subcontractor sales to the government, as well as requirements for employment eligibility verification, whistleblower protections, and cyber security adherence under NIST SP 800-171. Additional obligations include compliance with export controls, prohibitions on equipment from certain foreign entities like Huawei and Kaspersky, adherence to the Framework for Nucleic Acid Synthesis Screening, and mandatory reporting of suspect or counterfeit items. All deliveries are to be made to Brookhaven National Laboratory in Upton, New York, with acceptance occurring at the destination, and payment terms are
Brookhaven National Labor -Doe Contractor

POSTED

3 days ago

DEADLINE

in 10 days
View Details
NAICS: 334512
New
Federal
Ruggedized RF and EW Detection/Tracking Subsystem Supply
W6QK Acc- Dta

POSTED

4 days ago

DEADLINE

in 9 days
View Details
NAICS: 334512
New
Federal
59--SWITCH,THERMOSTATIC
Solicitation # SPE7M526T380S
The contract solicitation seeks the procurement of 19 thermostatic switches with NSN 5930015457596, to be delivered to the DLA Distribution Depot Hill no later than 168 days after award. The only approved source for this item is vendor 82647 with part number 21545-3-28-8. This is a full and open competition under an RFQ, with no hard copies available; all submissions must be made electronically through the online solicitation portal. No specifications, plans, or drawings are provided, and all responsible sources are invited to submit quotes as long as they are received before the deadline. The solicitation, numbered SPE7M526T380S, was posted on August 6, 2026, with responses due by August 17, 2026. The contracting activity falls under the Department of Defense, specifically DLA Land and Maritime, with the office located in Columbus, Ohio. Technical and procedural inquiries must be directed via email to the designated buyer listed in the solicitation's block 5 or through the provided DIBBS website link.
DLA Land And Maritime

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
Federal
59--SWITCH,THERMOSTATIC
Solicitation # SPE7M826T5751
The contract involves the procurement of 22 units of NSN 5930010934994 SWITCH THERMOSTATIC, to be delivered to W1A8 DLA DISTRIBUTION within 207 days after award. Only approved sources, specifically 09049 607T475S and 830Q4 W123292, are eligible to respond. The solicitation is issued as an RFQ under number SPE7M826T5751 and is exclusively available online via the provided SAM.gov link; no hard copies will be distributed, and no specifications, plans, or drawings are provided. All responsible suppliers may submit electronic quotes, provided they are received by the deadline of August 17, 2026. The procurement falls under NAICS code 334512 and is managed by the Department of Defense through DLA Land and Maritime, with the office located in Columbus, Ohio. Inquiries must be directed via email to DibbsBSM@dla.mil, with additional guidance available through the solicitation’s Additional Information link or by searching the solicitation number on the DIBBS website.
DLA Land And Maritime

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
Federal
59--SWITCH,THERMOSTATIC
Solicitation # SPE7M126U5067
The contract seeks the procurement of 54 thermostatic switches with NSN 5930006151177 under a solicitation that may lead to an automated indefinite delivery contract with a one-year term or until aggregate orders reach $350,000, whichever comes first. The guaranteed minimum order quantity is eight units, with an estimated two orders per year. Items are to be delivered to multiple DLA depots across CONUS and OCONUS regions via consolidated and containerized shipping points. Only approved sources—0YFP0 975-0116-001, 25583 975-0116-001, and 25583 G1-1Q—are eligible to respond. The solicitation is issued as an RFQ with no hard copies available; all submissions must be made electronically through the provided SAM.gov link. Technical specifications, plans, or drawings are not provided, and any responsible source may submit a quote if received by the deadline. The solicitation number is SPE7M126U5067, posted on August 6, 2026, with responses due by August 21, 2026, under NAICS code 334512, managed by the DLA Land and Maritime office in Columbus, Ohio. Questions must be directed via email to the designated point of contact.
DLA Land And Maritime

POSTED

4 days ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

New
DIBBS
PARTS KIT, CONTROL SURF
Solicitation # SPE4A5-26-Q-0574
The contract requires the supply of 18 units of a Parts Kit, Control Surface, Aircraft with NSN 1560-01-560-9901 and part number CA64527-001, manufactured by ONTIC ENGINEERING & MANUFACTURING, INC. Delivery is mandated within 552 days after award, with FOB origin, inspection and acceptance occurring at the destination. The item is designated as a Critical Application Item and must comply with stringent packaging standards per MIL-STD-2073-1E, including preservation, cushioning, and marking in accordance with MIL-STD-129. Each kit must be contained in a single box with a detailed contents list, barcoded per specifications, and palletized per DLA Packaging Requirements. The U.S. government’s unit of issue is specified, and Item Unique Identification is not required per customer request, though DFARS 252.211-7003(c)(1)(i) remains applicable. Sampling and quality assurance follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes must be verified at levels VII, IV, and II respectively. Cybersecurity compliance at CMMC Level 2 is self-assessed, and Covered Defense Information provisions apply. The contract enforces removal of government identification from non-accepted items and incorporates technical requirements from the DLA Master List. All materials must be shipped to DLA Distribution Depot Hill, Hill AFB, UT, with transportation governed by DLAD procedural notes C19 and C20. The procurement number is SPE4A5-26-Q-0574, with a purchase request ID of 7016227462 and a required ship date of November 25, 2028.

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333995
New
DIBBS
ROD AND PISTON, ACTU
Solicitation # SPE4A5-26-R-0270
The contract pertains to the procurement of 266 Rod & Piston, ACTU units with NSN 2915-012187655 and part number 2665806, classified as a Critical Safety item requiring a higher-level quality system. Delivery is mandated 167 days after receipt of order to a designated location, with FOB at origin and inspection and acceptance occurring at the destination. The solicitation is issued under an unrestricted solicitation using other than full and open competition and is anticipated to be awarded against the OEM’s Basic Ordering Agreement, with the RFP scheduled for release on or about August 12, 2026, and responses due by September 12, 2026. Offers exceeding $900,000 require a subcontracting plan, while those over $10,000,000 must include certified cost and pricing data in addition to a subcontracting plan. All offerors must be registered in the System for Award Management (SAM) to be eligible for award. Alternate offerors must submit a Source Approval Request package along with a completed solicitation copy to be considered; failure to submit sufficient documentation in time will result in exclusion from this procurement, though approval may qualify them for future opportunities. Award decisions will be based on price, past performance, and other factors assessed through the Supplier Performance Risk System. The procuring activity is DLA Aviation, with primary point of contact Jason Balsiger, and performance will occur in Richmond, Virginia.
Fluid Power Cylinder and Actuator Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334514
New
DIBBS
INDICATOR, SIGHT, LIQ
Solicitation # SPE4A5-26-T-337Z
The contract pertains to the procurement of one unit of an Indicator, Sight, Liquid, identified by NSN 6680-01-170-0724, with a delivery requirement of 20 days from contract award. Delivery is FOB destination, with inspection and acceptance also occurring at the destination. The item must be packaged in strict compliance with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and container codes, and marked according to MIL-STD-129 with the special marking code 05 indicating it is a delicate instrument. Palletization must adhere to DLA packaging requirements, and mercury or mercury-containing compounds are strictly prohibited in preservation, packaging, and marking unless explicitly exempted for functional components such as batteries or sensors specified by NAVSEA, with those exempted items requiring shock-proof construction and a secondary containment layer. Sampling and quality assurance follow MIL-STD-1916 or an equivalent zero-based plan, with acceptance criteria mandating zero non-conformances unless otherwise stated. The contract incorporates technical and quality requirements from the DLA Master List, and the applicable revision is controlled by the solicitation issue date. The item is to be delivered to USS ASHLAND LSD 48, FPO AP 96660, with shipping required via the fastest traceable means, explicitly excluding parcel post. The original required delivery date is August 4, 2026, and the contract is issued under solicitation SPE4A5-26-T-337Z by the Department of Defense, with Hien-Van Trinh as the point of contact.
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333611
New
DIBBS
SEAL, AIR, AIRCRAFT G
Solicitation # SPE4A5-26-T-338E
This contract pertains to the procurement of a SEAL, AIR, AIRCRAFT G component identified by NSN 2840017297710 and part number 315T4100-11, with a quantity of seven units required for delivery within 124 days. The item is classified as a Critical Application Item and must comply with stringent technical and quality requirements referenced from the DLA Master List, including adherence to MIL-STD-1916 or ASQ H1331 sampling standards with zero non-conformances allowed in the sample lot. The component is subject to FAA airworthiness approval requirements, though unique identification is waived per customer request, and must meet FAA Bare Item Marking Requirements and preservation, packaging, and marking standards outlined in MIL-STD-2073-1E and MIL-STD-129 without special marking. Supply chain traceability documentation must be retained by the contractor per DLA Directive Procurement Note C03, and cybersecurity maturity must be assessed at CMMC Level 2 via self-certification. The product must be delivered FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with packaging and palletization conforming to DLA-specific requirements. Delivery is scheduled for May 3, 2026, with a contractual deadline of November 28, 2026, and inspection and acceptance occur at the destination. All technical and quality specifications are controlled by the version of the DLA Master List in effect on the contract award date.
Turbine and Turbine Generator Set Units Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332996
New
DIBBS
TUBE ASSEMBLY, METAL
Solicitation # SPE4A5-26-T-338B
The contract is for a single unit of a metal tube assembly, part number 68A691949-1001, with NSN 4710014480994, supplied to the U.S. Department of Defense under solicitation SPE4A5-26-T-338B. Delivery is required within five days to Robins Air Force Base, Georgia, with FOB origin terms and no quantity variance allowed. Inspection and acceptance occur at the destination. The item is designated as a critical application, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization adhering to DLA-specific packaging guidelines, and the use of parcel post is strictly prohibited. All shipments must be sent via the fastest traceable means. The manufacturer must meet non-tailored ISO 9001:2015 quality requirements and follow configuration change management and variance request protocols. Sampling adheres to MIL-STD-1916 or approved zero-based plans, with acceptance criteria requiring zero non-conformances unless otherwise specified. Unit identification is not required per the service customer's request. The contract includes specific documentation, packaging, labeling, and shipping instructions, with the point of contact being Annette Pruett. The original delivery date is August 3, 2026.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
SHAFT ASSEMBLY, FLEX
Solicitation # SPE4A5-26-T-338D
The contract is for the procurement of 17 units of a flexible shaft assembly, identified by NSN 6680-00-798-3059 and part number M10215-1F112, manufactured in compliance with MIL-DTL-10215P Revision P dated June 3, 2025. The item must adhere to all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with components subject to Qualified Products List or Qualified Manufacturers List qualifications. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1, or a comparable zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. Zero non-conformances are required in sample lots unless otherwise specified. Packaging must conform to MIL-STD-2073-1E with preservative method 10, and marking must align with MIL-STD-129, without special markings. Palletization follows DLA packaging requirements. Delivery is FOB origin, with inspection and acceptance occurring at destination. The required delivery date is February 26, 2027, with a 191-day lead time from contract award. The unit of issue is each, with no quantity variance permitted. The shipping destination is the DLA Distribution facility in New Cumberland, Pennsylvania. The contract solicitation number is SPE4A5-26-T-338D, issued on August 10, 2026, with proposals due by August 18, 2026, under NAICS code 334519, and is managed by the Department of Defense’s ASC Supplier Oper OEM Division.
Other Measuring and Controlling Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332996
New
DIBBS
RETAINER, COUPLING
Solicitation # SPE4A5-26-T-338G
The contract pertains to the procurement of a Retainer, Coupling, identified by part number 555-3115-501 and NSN 4730-01-559-0320, with a total quantity of 216 units to be delivered FOB origin within 405 days. The item is classified as a Commercial Off the Shelf (COTS) product, and while Item Unique Identification is not required, the supplier must comply with all applicable DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must meet DLA’s RP001 packaging requirements. The delivery destination is DLA Distribution Warner Robins at Robins Air Force Base, Georgia, with inspection and acceptance occurring at the destination. The supplier must also complete a Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment and comply with requirements for Covered Defense Information under RD002. The purchase request number is 7014383879, the unit price is $216.00 totaling $46,656, and the original required delivery date is October 26, 2027, with a needed ship date of May 3, 2026. The solicitation number is SPE4A5-26-T-338G, issued by the Department of Defense, with Cynthia Duval as the primary point of contact.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
TRANSMITTER, LIQUID
Solicitation # SPE4A5-26-T-338F
The item is a liquid transmitter identified as a commercial item, sourced under solicitation SPE4A5-26-T-338F with a quantity of four units, and a delivery deadline of 165 days after award. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. The contractor must comply with DLA packaging specifications, cybersecurity maturity model certification level 2 requirements through a certified third-party assessment organization, and configuration change management protocols requiring formal engineering change proposals for any deviations. Export control restrictions apply due to the presence of technical data subject to ITAR or EAR, mandating prior government authorization for any export or disclosure to foreign nationals, even within the United States, and limiting access only to DLA-approved contractors holding JCP certification, who have completed required training and questionnaire approvals. Physical marking of the item is required per RQ017, though unique identification is waived per customer request under DFARS 252.211-7003. Covered defense information protocols and removal of government identification from non-accepted supplies are also mandated. The point of contact is Francis Polakiewicz, with performance located at Robins AFB, Georgia, and responses due by August 18, 2026.
Other Measuring and Controlling Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
AXLE, LANDING GEAR
Solicitation # SPE4A5-26-T-338H
Offerors bidding on this solicitation must comply with strict domestic sourcing requirements, including the Berry Amendment and Buy American Act, with a lowered threshold of $150,000, and must disclose any non-domestic materials used in their proposal. The use of covered telecommunications equipment or services is prohibited under FAR and DFARS clauses, and all offers must affirm they will not supply such items. Small business joint ventures must submit specific representations for eligibility categories including small business, service-disabled veteran-owned, women-owned, economically disadvantaged women-owned, and HUBZone status. Vendors must provide quantity ranges in their quotes due to fluctuating demand, as manual evaluation allows for flexible adjustments without resolicitation, though this does not apply to Auto IDC. Submission of a “No Bid” on DIBBS is strongly encouraged for those anticipating delayed or non-participation to avoid assumptions of non-responsiveness. All contractors must register through DLA’s new AMPS system within two months to maintain access to the Vendor Shipment Module and continue shipping to DLA; VSM WebServices users must also update their internal schema to avoid disruption. Additive manufacturing is prohibited unless specifically approved, and any proposal including AM-produced items will be disqualified. The solicitation pertains to an AXLE, LANDING GEAR with NSN 1620-01-158-5930, quantity of 40 units, delivery required within 202 days ADO, and response is due by August 18, 2026. Fast Pay is not applicable, and APEX Accelerators are available at no cost to assist businesses with government contracting support.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE4A5-26-Q-0677
The contract is for the procurement of 77 units of a safety relief valve identified by NSN 4820-01-313-1011 and part number 39E14-1 from Honeywell International Inc. This is a commercial item designated as a Navy-critical safety item, requiring strict compliance with technical and quality specifications referenced from the DLA Master List, including mandatory adherence to MIL-STD-1916 or ASQ H1331 for sampling, with zero non-conformances expected unless otherwise specified. The item must be manufactured and tested using limited rights data accessible only to approved vendors, and source approval documentation is required for any new supplier. All units must meet critical characteristics including material compatibility with MIL-L-7808, passage of rated flow and proof pressure tests per drawing notes, and be marked in accordance with MIL-STD-129 including lot and serial numbers, manufacturer’s CAGE code, and part number. Packaging must conform to MIL-STD-2073-1E and DLA packaging requirements, with no special marking beyond standard requirements. The contract specifies a firm fixed price with no variance allowed in quantity, inspection and acceptance at origin, and delivery within 141 days after award. The item is subject to cybersecurity maturity model certification level 2 self-assessment and controlled under provisions for covered defense information. Measuring and test equipment must comply with RT001 standards, and non-conforming items must have government identification removed. The valve is source-controlled and requires traceability to approved sources; vendors without access to the technical data package or without existing approval must submit a source approval request. Delivery is FOB origin to the specified DLA warehouse in Tracy, California, with transportation handled per DLA procedural notes. The purchase request is 7015248083, and delivery is scheduled for November 21, 2026. The solicitation was posted August 10, 2026, with responses due by August 14, 2026.
Industrial Valve Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332999
New
DIBBS
SHACKLE
Solicitation # SPE4A5-26-T-338A
The contract solicitation titled SHACKLE with solicitation number SPE4A5-26-T-338A seeks the procurement of 24 units of a commercial off the shelf item identified by NSN 4030-01-495-8547 under purchase request 7017761250. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment updates the requirements. The delivered items must conform to DLA packaging requirements and government identification must be removed from any non-accepted supplies. The delivery deadline is set at 20 days after delivery order issuance, with the place of performance located at Fort Eustis, Virginia, zip code 23604-5577. The solicitation was posted on August 10, 2026, with responses due by August 18, 2026, and is classified under NAICS code 332999. Primary point of contact for inquiries is Hien-Van Trinh, reachable via email or phone provided by the ASC Supplier OEM Division within the Department of Defense.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
HINGE, BUTT
Solicitation # SPE4A5-26-Q-0678
The contract is for the procurement of 29 units of a hinge, butt component identified by NSN 5340-01-483-4203, with a delivery requirement of 167 days after award. The solicitation number is SPE4A5-26-Q-0678, with a response deadline of August 21, 2026, and was posted on August 10, 2026. Technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the acquisition type and timing of amendments. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Government identification must be removed from rejected supplies, and bare items must be physically marked per specification. Item Unique Identification is not required per the Service customer’s request. Technical data associated with this item is subject to export control under ITAR or EAR, with disclosure to foreign persons—whether in the U.S. or abroad—requiring prior authorization. Access to this controlled data is restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and the DLA questionnaire, and have been formally approved by DLA. The contract is managed by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, with Sarah Cave as the primary point of contact.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details