Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Gantry-Based 3D Printing System Design and Integration

Active

SBIR / STTR

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract under the NASA SBIR/STTR Program involves the design, construction, and integration of a custom gantry-based 3D printing system. The primary objective is to enable the conformal deposition of phenolic foam onto non-planar surfaces, requiring the development of specialized motion control, fluid handling systems, and defect monitoring capabilities. The project is designated as a Total Small Business Set-Aside for entities with fewer than 500 employees, falling under NAICS code 333295. Performance of the contract is located in Houston, Texas, and the initiative is managed through the National Aeronautics and Space Administration.

General Info

NASA subcontract for custom 3D printing system for phenolic foam deposition in Houston.

Agency

National Aeronautics and Space Administration → NASA SBIR/STTR ProgramView Agency

NAICS

333295 - Semiconductor Machinery ManufacturingView NAICS

Place of Performance

Houston, TX, 77058, USA

Set-Aside

SBA

Documents

This scope was carved out of T12.05-3097.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

3D Printing of High Temperature Thermoset Foams for Space Vehicular Thermal Protection Systems

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 20

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNational Aeronautics and Space Administration → NASA SBIR/STTR Program

ContactsNo contacts available

OfficeN/A

Organization / Agency

National Aeronautics and Space Administration → NASA SBIR/STTR Program

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Design, build, and integrate a custom gantry-based 3D printing system for conformal deposition of phenolic foam on non-planar surfaces, including motion control, fluid handling, and defect monitoring.

Similar Contracts

Same NAICS industry code

Military-Compliant Packaging and Labeling Services

DDSP NEW CUMBERLAND FACILITY

POSTED

about 13 hours ago

DEADLINE

Thin Film Coating and Annealing EquipmentThe National Energy Technology Lab under the Department of Energy is seeking a subcontractor for the supply and integration of specialized thin film processing equipment. The scope of work includes the procurement of drop casting, spin coating, dip coating, and N2/air drying systems, as well as an 8-stage annealer designed for planar substrates with an operational temperature range between 25 and 500 degrees Celsius. This subcontract opportunity is categorized under NAICS code 333295. The solicitation was posted on August 25, 2026, with a response deadline of September 4, 2026. Interested parties can find further details through the provided FedConnect link.

National Energy Technology Lab

POSTED

DEADLINE

Dental Equipment and Large-Item Supply

Navajo Area Indian Health Svc

POSTED

DEADLINE

Supply of Hassler Core Holders (QTY 3)The National Energy Technology Lab, under the Department of Energy, is seeking a subcontractor for the procurement and delivery of three high-pressure Hassler Core Holders. These specialized devices are required for geomechanical testing of rock samples to simulate downhole conditions. The project falls under NAICS code 333295 and is designated as an SBA set-aside. The solicitation was posted on August 21, 2026, with a response deadline of September 11, 2026, at 5:00 PM. Interested parties can find further details and submission guidelines through the provided FedConnect link.

National Energy Technology Lab

POSTED

DEADLINE

Large-Aperture Optical Polishing Platform Fabrication

NASA SBIR/STTR Program

POSTED

DEADLINE

Commercial Kitchen Equipment Supply and DeliveryThis subcontract involves the supply and delivery of a Robot Coupe mixer for the Cambridge Developmental Center located in Cambridge, Ohio. The equipment is intended for use within a commercial kitchen setting, with the procurement falling under NAICS code 333295. The opportunity was posted on August 14, 2026, by the agency Ddd202000 Cambridge Dc Cadc for the state of Ohio. Interested parties must submit their responses by the deadline of August 31, 2026, at 6:00 PM.

Ddd202000 Cambridge Dc Cadc

POSTED

DEADLINE

in about 12 hours

Supply of Major Dental EquipmentThe North East Regional Health Authority of the Government of Jamaica is seeking a subcontractor for the supply of major dental equipment. This contract encompasses the provision of essential capital assets, including dental chairs, delivery units, X-ray machines, autoclaves, and cabinetry, with the potential scope extending to professional installation and staff training. Classified under NAICS code 333295, the procurement process was initiated on August 12, 2026. Interested parties can find further details and submission guidelines through the official Government of Jamaica electronic public procurement portal.

North East Regional Health Authority

POSTED

DEADLINE

Materials Testing and Characterization Equipment SupplyThe contract calls for the supply of advanced materials testing and characterization equipment tailored for defense-related research, specifically targeting applications in lightweight armor and corrosion resistance. Required equipment includes tensile testers, fatigue machines, nanoindenters, and in-situ SEM testing stages, all of which must meet rigorous performance standards to support precise material analysis under demanding operational conditions. The procurement is structured as a subcontract under the Office of Naval Research, part of the Department of Defense, with the NAICS code 333295 indicating specialization in other industrial machinery manufacturing. All proposals must be submitted by November 6, 2026, following the public posting of the solicitation on July 29, 2026. The equipment must be capable of delivering high-fidelity data in controlled environments to enable accurate evaluation of new material compositions and structural behaviors pertinent to naval defense systems. Performance of the work is not restricted to a specific geographic location, but delivery and integration must ensure compatibility with existing laboratory infrastructure and mission-critical testing protocols. The subcontractor is expected to provide not only hardware but also technical support and documentation to ensure seamless adoption and operation by research personnel.

Office Of Naval Research

POSTED

about 1 month ago

DEADLINE

Precision Additive (3D) Printer SupplyThe contract awards the delivery, configuration, and IUID marking of a single precision industrial 3D printing system under CLIN 0001, targeting advanced manufacturing capabilities for defense applications. The equipment will be furnished and fully set up to meet operational standards, including compliance with Item Unique Identification requirements for traceability and inventory management within the Department of Defense supply chain. This subcontract falls under NAICS code 333295 for other industrial machinery manufacturing and is managed by the Defense Logistics Agency under the broader Department of Defense procurement framework. The award was posted on July 20, 2026, and is linked to a primary contract with the identifier SPE8EZ21D0009, with a specific delivery order of SPE8EJ26F038G. The place of performance and exact location details are not specified, indicating flexibility in deployment, while the procurement type is classified as a subcontract without a defined small business set-aside designation.

Defense Logistics Agency

POSTED

about 1 month ago

DEADLINE

Cannabis Volatile Extraction Equipment SupplyThe contract entails the supply of closed-loop hydrocarbon extraction systems, solvents, chillers, and post-processing equipment essential for cannabis concentrate manufacturing, with all equipment to be delivered and installed at a facility located in Lynwood, California, zip code 90262. The scope of work is structured as a subcontract under the broader regulatory framework of the California Department of Cannabis Control, focusing on the provision of industrial-grade hardware designed to meet strict safety and efficiency standards required for volatile extraction processes. The equipment must support full operational compliance with state regulations governing cannabis processing, ensuring consistent output quality, operator safety, and environmental controls. The procurement is classified under NAICS code 333295, indicating it pertains to other commercial and service industry machinery manufacturing, and is scheduled to proceed with a posted date of June 26, 2026. Although the solicitation number is unspecified and no set-aside provisions are identified, the obligation is tied to a specific geographic performance location and requires adherence to California’s regulatory protocols for cannabis operations. The equipment will be used in a commercial manufacturing environment, necessitating integration with existing production infrastructure and compliance with hazardous material handling standards. All deliverables must be fully functional, certified, and supported by appropriate documentation to ensure operational readiness upon delivery.

California Cannabis Control, Department of

POSTED

DEADLINE

Brewery System Installation and CommissioningThe contract entails the supply, installation, and commissioning of a complete brewing system for a facility in Los Angeles, specifically at a location with the zip code 91303. It includes essential brewing equipment such as mash tuns, fermenters, brite tanks, glycol chillers, and integrated control systems, all of which must be delivered, properly installed, and commissioned to ensure full operational readiness. The work is defined under NAICS code 333295, which corresponds to other commercial and service industry machinery manufacturing, indicating the technical nature of the equipment and its integration into an industrial brewing environment. The contract is structured as a subcontract and was posted on June 24, 2026, with the City of Los Angeles listed as the organizing agency under the California state jurisdiction, though no specific office or point of contact is provided. All work is to be performed at the designated place of performance in Los Angeles, and the project is accessible through a public link tied to the CEQA net system for environmental compliance tracking.

City of Los Angeles

POSTED

DEADLINE

Lavender Processing Facility Fit-Out

POSTED

DEADLINE

More opportunities from National Aeronautics and Space Administration → NASA SBIR/STTR Program

Same awarding agency

Extreme Environment Packaging and IntegrationThe Extreme Environment Packaging and Integration subcontract, managed by the NASA SBIR/STTR Program, focuses on the design and fabrication of hermetic, corrosion-resistant enclosures and mechanical integration solutions. These components are specifically engineered to protect sensors and electronics from the harsh surface conditions of Venus. This opportunity is designated as a Total Small Business Set-Aside under the SBIR/STTR mandate for companies with fewer than 500 employees. The project is associated with NAICS code 332999 and is slated for performance in Cleveland, Ohio.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Sensor Prototyping and Laboratory-Scale TestingThe NASA SBIR/STTR Program is seeking a subcontractor for the Sensor Prototyping and Laboratory-Scale Testing project, which focuses on the development of integrated sensor prototypes. The primary objective is to conduct rigorous performance testing under simulated Venusian conditions, specifically targeting environments characterized by extreme high pressure and high temperature. This opportunity is designated as a Total Small Business Set-Aside, restricted to firms with fewer than 500 employees under the SBIR/STTR mandate. The work is categorized under NAICS code 541380 and is slated for performance in Cleveland, Ohio.

Testing Laboratories and Services

POSTED

DEADLINE

High-Temperature Electronics DevelopmentThe NASA SBIR/STTR Program is seeking a subcontractor to design and develop high-temperature compatible electronics specifically engineered for the extreme surface conditions of Venus. This project focuses on utilizing wide-bandgap semiconductors to ensure effective signal processing and control capabilities in high-heat environments. This opportunity is designated as a Total Small Business Set-Aside under the SBIR/STTR mandate, requiring the recipient to have fewer than 500 employees. The work is associated with NAICS code 334418 and is slated for performance in Cleveland, Ohio.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

High-Temperature Sensor Design and Materials EngineeringThe NASA SBIR/STTR Program is seeking a subcontract for the design and development of specialized materials and sensor architectures engineered to function under the extreme surface conditions of Venus. The primary objective is to create technology capable of withstanding high temperatures, intense pressure, and highly corrosive environments. This opportunity is designated as a Total Small Business Set-Aside, specifically targeting firms with fewer than 500 employees under the SBIR/STTR mandate. The project falls under NAICS code 541715 and is associated with performance activities located in Cleveland, Ohio.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

Halide Raw Material Supply

All Other Basic Inorganic Chemical Manufacturing

POSTED

DEADLINE

Business Case Development & Commercialization Strategy

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Materials Characterization & Performance Analysis

Testing Laboratories and Services

POSTED

DEADLINE

Ground-Based Microgravity Simulation & Testing Services

Testing Laboratories and Services

POSTED

DEADLINE

Microgravity Crystal Growth Hardware Design & Fabrication

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Long-Term Performance and Environmental Testing

Testing Laboratories and Services

POSTED

DEADLINE

Integration with Rapid-Cycle Amine (RCA) System

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Twin-Monolith TCCS Prototype Design and Assembly

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE