Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Gas Regulation System Supply

Active

Federal

Response Deadline08/11/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the supply of a high-purity gas regulation system designed for the controlled delivery of argon and other carrier gases to an ICP-MS system, ensuring precise and contaminant-free gas flow critical for analytical accuracy. The system must meet stringent purity standards to prevent interference with sensitive measurements, and the subcontractor is expected to deliver a fully integrated, reliable solution compatible with existing instrumentation. The project falls under NAICS code 325998, indicating it targets other chemical product and preparation manufacturing, and is managed by the National Energy Technology Lab under the Department of Energy. The solicitation was posted on July 28, 2026, with a firm response deadline of August 11, 2026, at 8:30 PM ET, allowing potential vendors approximately two weeks to submit proposals. The contract type is explicitly labeled as a subcontract, suggesting it supports a larger program or project managed by the DOE’s lab. No set-aside provisions, specific office address, or point of contact are detailed in the provided data, but the place of performance and delivery location are implied to align with the ICP-MS system’s operational site. All submissions must be made through the FedConnect portal linked in the contract notice.

General Info

Supply of high-purity argon gas system for ICP-MS under DOE subcontract, due August 11, 2026.

Agency

Department Of Energy → National Energy Technology LabView Agency

NAICS

325998 - All Other Miscellaneous Chemical Product and Preparation ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 11

Submission deadline

Response Deadline

08/11/2026, 08:30:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Energy → National Energy Technology Lab

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Energy → National Energy Technology Lab

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of a high-purity gas regulation system for controlled delivery of argon and other carrier gases to the ICP-MS system.

Similar Contracts

Same NAICS industry code

LUBRICATOR, AIRLINE

Solicitation # SPE8EE-26-T-2195

The contract is for a single unit of a lubricator, airline, identified by NSN 4930-01-284-6948 and part number P8B-860-M3DA, with a total price of USD 1.000, to be delivered within 20 days to the destination FOB point at USS NEW ORLEANS LPD 18, FPO AP 96673. Delivery is subject to zero variance in quantity, with inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following the DLA Packaging Requirements for Procurement (RP001), and all DLA Master List of Technical and Quality Requirements take precedence over any referenced standards. The unit of issue is EA, and the supply must be properly marked and labeled per DLA directives. The solicitation number is SPE8EE-26-T-2195, issued under a federal acquisition framework, with a required delivery date of July 27, 2026, and a response deadline of August 10, 2026. Transportation and shipment details reference DLAD PROC NOTES C19 and C20, and vendor compliance requires use of the VSM system. The point of contact is Philip Ferrara, and the item falls under NAICS code 325998. Government-specific identifiers and logistics codes are embedded for internal tracking and distribution.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 18 hours ago

DEADLINE

Procurement of Carbon and Kynol Fibers for Aerospace ApplicationsThe contract seeks the supply of 5 denier carbon and Kynol phenolic precursor fibers exclusively for development of thermal protection systems in aerospace applications, requiring strict adherence to aerospace-grade performance and material specifications. All fibers must meet rigorous quality standards, including consistent physical and chemical properties necessary for high-temperature environments, and full traceability of raw materials through every stage of production and delivery is mandatory to ensure compliance with NASA’s aerospace protocols. The subcontract is issued under the NAICS code 325998 for other chemical product and preparation manufacturing and is procured through the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration to support critical TPS research and development initiatives. Responses are due by August 1, 2026, at 1:30 AM, with no set-aside provisions specified, indicating open competition among qualified suppliers capable of fulfilling the technical and documentation demands of the requirement.

NASA Shared Services Center

POSTED

about 23 hours ago

DEADLINE

Custom Reagent and Primer SupplyThe contract entails the supply of custom TaqMan SNP genotyping assays or equivalent reagents targeting ten specific mitochondrial single nucleotide polymorphisms, forming a critical component of a defined genotyping workflow. These reagents must meet precise technical specifications to ensure accurate and reliable SNP detection within the intended laboratory environment, and the supplier is expected to deliver fully validated, ready-to-use products that integrate seamlessly into existing protocols. The work is structured as a subcontract under the National Institutes of Health, Office of Laboratory Animal Welfare, part of the Department of Health and Human Services, with performance expected to support high-throughput genetic analysis objectives. The solicitation was posted on July 29, 2026, with a firm response deadline of August 7, 2026, at 6:00 PM, indicating a tight turnaround for submissions. The North American Industry Classification System code 325998 designates this as a miscellaneous chemical product manufacturing activity, reflecting the specialized nature of the reagents required. There is no set-aside designation specified, meaning any qualified vendor may submit a proposal, though the reagent specifications necessitate demonstrated expertise in molecular diagnostics and SNP assay development. The place of performance and office address details are not provided, suggesting the delivery and technical support may be remote, with shipment and validation documentation forming a key part of compliance.

National Institutes Of Health Olao

POSTED

about 23 hours ago

DEADLINE

Packaging and Labeling Services for Medical/Dental KitsThe contract seeks specialized packaging, labeling, and kitting services for dental chemical products, requiring strict adherence to military and federal regulatory standards to ensure safety, traceability, and compliance. All work must be performed at the designated place of performance in Suffolk, Virginia, with ZIP code 23435-5000, and must align with the NAICS code 325998 for other chemical product manufacturing. The solicitation is issued as a subcontract under the Department of Defense, specifically through the Medical Supply Chain FSH, and is open for responses until August 4, 2026, with the opportunity posted on July 28, 2026. Participation is expected to meet exacting quality control and documentation requirements consistent with defense supply chain protocols, though no specific set-aside criteria are outlined. Interested parties must submit proposals through the DIBBS portal using the provided solicitation link.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Military-Grade Packaging and Kit AssemblyThe contract involves the assembly of adhesive into kits utilizing resealable tubes, along with precise packaging in D3/D4 compliant boxes that include appropriate dunnage to ensure product integrity during transit. All kit assembly and packaging must strictly adhere to the requirements outlined in RP001 and MIL-STD-2073-1E, ensuring standardized military packaging practices are followed. An itemized contents list must be prepared for each kit to accurately reflect the components included, facilitating inventory control and field deployment readiness. The work is scheduled under a subcontract classification issued by the Defense Logistics Agency under the Department of Defense, with the NAICS code 325998 indicating classification under other chemical product and preparation manufacturing. Performance is required at Fort Wainwright, Alaska, with a zip code of 99703-7000. Proposals must be submitted by August 3, 2026, and the solicitation was posted on July 28, 2026. All deliverables must meet exacting military standards for durability, documentation, and traceability under wartime and austere operating conditions.

Defense Logistics Agency

POSTED

DEADLINE

Medical-Grade Packaging and Labeling (MMS No. 1 Compliant)The contract requires the packaging of plasma control into standardized 15-vial packages, each containing four sleeves, with strict adherence to Medical Marking Standard No. 1 to ensure regulatory compliance. All packaging must incorporate secure labeling, accurate barcoding, and maintain cold chain integrity throughout handling and transport to preserve product viability. The work is to be performed at the designated location in APO, 09898, under the oversight of the Department of Defense's Medical Supply Chain MD Surg FSF, with the NAICS code 325998 indicating it falls under other miscellaneous medical and dental equipment manufacturing. The solicitation was posted on July 28, 2026, and responses are due by August 3, 2026, with the contract structured as a subcontract opportunity within the broader defense medical logistics framework.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Supply of Silver Solder Paste (RMA Type, ASTM B32 Compliant)The contract calls for the supply of 8-ounce units of silver solder paste meeting RMA type specifications and full compliance with ASTM B32 standards and Defense Logistics Agency technical requirements. The product must be packaged and labeled according to stringent military logistics protocols to ensure compatibility with DoD supply chain procedures. All units must adhere to the specified formulation and quality benchmarks to guarantee performance in defense-related applications. The solicitation is issued as a subcontract under the NAICS code 325998 by the Defense Logistics Agency, a department of the Department of Defense. The response deadline is August 10, 2026, with the posting date listed as July 28, 2026. The place of performance is designated as FPO with ZIP code 96643, indicating a military postal address. The contract does not specify any set-aside requirements or point of contact information, and interested parties must reference the official DIBBS portal link to access detailed submission instructions and requirements.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Non-Exempt Hazardous MaterialsThe contract pertains to the manufacture or supply of hazardous materials that are not exempt under statutory exceptions, requiring full submission of Safety Data Sheets and strict adherence to GHS-compliant labeling standards. All materials must meet regulatory safety and communication requirements to ensure proper handling, storage, and transport. The contract is structured as a subcontract under a Total Small Business Set-Aside designation, reserved exclusively for small businesses as defined by the SBA, with a NAICS code of 325998 indicating classification under other chemical product and preparation manufacturing. The solicitation was posted on July 28, 2026, with a response deadline of August 10, 2026, and is managed by the Department of Defense through its Land Supply Chain office. Performance location and specific point of contact details are not provided, but the opportunity is accessible via the DIBBS portal for qualified small business vendors to submit responses.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Additive Manufacturing Material SupplyThe contract seeks the supply and delivery of defense-grade additive manufacturing filament designated by NSN 9330027128722, exclusively for use in military and defense applications. The material must meet stringent federal and military standards for packaging, labeling, and handling of hazardous materials, ensuring full compliance with safety and regulatory protocols throughout the supply chain. Delivery is required to a specified performance location in San Diego, California, with the zip code 92136, and all submissions must align with the technical and logistical expectations set by the Defense Logistics Agency under the Department of Defense. This subcontract opportunity, posted on July 28, 2026, has a response deadline of August 10, 2026, and is classified under NAICS code 325998 for other chemical product and preparation manufacturing. The procurement is managed by the Defense Logistics Agency and is intended to support critical defense manufacturing capabilities. Bidders must be prepared to demonstrate adherence to defense-grade material specifications, secure handling procedures for regulated substances, and reliable delivery timelines to meet operational readiness requirements. The contract’s focus on compliance, quality, and secure logistics underscores its importance to national defense infrastructure.

Defense Logistics Agency

POSTED

DEADLINE

Decal Manufacturing and SupplyThe contract requires the manufacture and delivery of 64 units of a Type I shelf-life decal identified by NSN 7690-01-617-0384 and Part Number EP-0010909, adhering strictly to military specifications for chemical durability, adhesion performance, and resistance to environmental conditions. Each decal must have a defined and non-extendable shelf life of exactly 24 months from the date of manufacture, ensuring long-term usability without degradation under operational storage conditions. The requirement is part of a subcontract under the NAICS code 325998, with performance to be conducted at Tracy, California, 95304-5000, under the oversight of the DLA Dist San Joaquin, a division of the Department of Defense. The solicitation was posted on July 28, 2026, with a firm response deadline of August 10, 2026, offering no flexibility for extensions or modifications. There is no set-aside designation, meaning the opportunity is open to all qualified subcontractors regardless of business size or status. The contract is part of a broader effort to maintain standardized, high-performance labeling systems for military logistics and inventory control, and compliance with exacting technical standards is mandatory to ensure compatibility and reliability across defense supply chains. Submissions must align fully with the referenced specifications and delivery timelines to be considered for award.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Supply of Laboratory Borosilicate Glass Cylinders (600 mL)The contract entails the procurement and delivery of ungraduated 600 mL borosilicate glass cylinders, specified as a commercial item, with all deliveries bound for the designated destination and subject to formal acceptance. These glass cylinders are intended for laboratory use and must meet precise dimensional requirements to ensure compatibility and functionality in scientific environments. The solicitation is issued under a subcontract structure through the Department of Defense’s Medical Supply Chain FSH, with the NAICS code 325998 reflecting its classification under Other Miscellaneous Chemical Product and Preparation Manufacturing. Performance of the contract is required at a military postal address in FPO with the zip code 96632, indicating delivery to a U.S. military installation overseas or in a remote location. The opportunity was posted on July 28, 2026, and responses must be submitted by August 4, 2026, providing a seven-day window for offerors to prepare and submit their proposals. The requirement is not subject to any set-aside provisions, and all interested vendors must comply with the technical and logistical specifications outlined in the solicitation linked through the DIBBS platform.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Supplier of Class I Ozone-Depleting Chemical SubstitutesThe contract calls for the supply of environmentally compliant chemical substitutes to replace Class I ozone-depleting chemicals, which are prohibited under federal regulations. Suppliers must ensure their products meet stringent environmental standards and are approved by the appropriate government authorities before delivery. The solicitation is issued under the NAICS code 325998 for other chemical product and preparation manufacturing and is structured as a subcontract opportunity managed by the Department of Defense through its LAND SUPPLY CHAIN division. Performance of the contract is required to take place at a designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. Interested parties must submit their responses no later than August 10, 2026, with the solicitation initially posted on July 28, 2026. All submissions must align with federal environmental compliance requirements and demonstrate technical and regulatory suitability for use in defense-related applications.

LAND SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Energy → National Energy Technology Lab

Same awarding agency

Onsite Project Management and Technical CoordinationThe contract seeks a qualified project manager or technical lead to provide onsite support for the coordination and implementation of a project under the National Energy Technology Laboratory, part of the Department of Energy. The primary responsibility involves managing stakeholder communications, aligning project activities with NETL’s IT and security protocols, and ensuring seamless integration of technical solutions within existing infrastructure. The role demands close collaboration with internal teams to maintain compliance, mitigate risks, and drive project milestones forward in a secure and efficient manner. This is a subcontract opportunity classified under NAICS code 541611, set aside for Small Business Administration participation, with a response deadline of August 11, 2026. The work is expected to be performed on-site, though specific location details are not provided. Interested parties must submit their proposals by the specified deadline to be considered, with the opportunity posted on FedConnect under the DOE’s solicitation. The position requires demonstrated experience in technical leadership, project coordination, and familiarity with federal laboratory environments and cybersecurity standards.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

ServiceNow SecOps Integration and Workflow AutomationThe contract seeks development of integrated cross-module workflows within the ServiceNow platform to link the Configuration Management Database, Vulnerability Repository, and Service Incident Records for enhanced federal cybersecurity operations. The work requires ensuring data consistency across these systems, automating notifications for critical security events, and building real-time dashboards that support compliance with federal cybersecurity reporting requirements. The solution must enable seamless information flow between modules to improve incident response, reduce manual intervention, and provide actionable insights for security teams. This is a subcontract under the SBA set-aside program with a NAICS code of 541519, indicating it is categorized under Other Computer Related Services. It was posted by the National Energy Technology Laboratory, a division of the Department of Energy, and requires proposals to be submitted by August 11, 2026. The project aims to strengthen cybersecurity posture through automation and data unification, focusing on operational efficiency and regulatory reporting for federal missions. Performance location details are not specified, but work is expected to support federal cybersecurity initiatives under the DOE’s oversight.

Other Computer Related Services

POSTED

DEADLINE

ServiceNow Security Incident Response (SIR) Module ImplementationThe contract seeks implementation of the ServiceNow Security Incident Response (SIR) module to enhance the detection, triage, escalation, and resolution of security incidents across the organization’s infrastructure. This project requires seamless integration with existing SIEM tools and alignment with SOC operational workflows to ensure real-time threat response, automated incident handling, and improved visibility into security events. The solution must support scalable incident management workflows, enable role-based access controls, and facilitate audit-ready documentation throughout the incident lifecycle. The work is structured as a subcontract under the SBA set-aside program, targeting small business participation, with a NAICS code of 541511 reflecting IT consulting and related services. The opportunity was posted on July 28, 2026, with a response deadline of August 11, 2026, and is managed by the National Energy Technology Lab under the Department of Energy. While specific performance location details are not provided, the implementation must meet federal cybersecurity standards and support the lab’s mission-critical environments. Contractors are expected to deliver a fully functional, tested, and documented SIR system aligned with institutional operational requirements and integration protocols.

Custom Computer Programming Services

POSTED

DEADLINE

ServiceNow Vulnerability Response (VR) Module DeploymentThe contract entails the configuration and deployment of the ServiceNow Vulnerability Response module to automate the ingestion of vulnerability data, streamline the prioritization of remediation efforts, and seamlessly integrate with existing patch management systems. The goal is to enhance the organization’s cybersecurity posture by reducing response times, improving accuracy in vulnerability assessment, and enabling a coordinated approach to remediation across enterprise systems. The solution must be tailored to align with the National Energy Technology Lab’s operational environment and security requirements, ensuring scalability and compatibility with current IT infrastructure. This is a subcontract under the SBA set-aside program, classified under NAICS code 541511 for custom computer programming services. The solicitation was posted on July 28, 2026, with a response deadline of August 11, 2026, and is sponsored by the Department of Energy through the National Energy Technology Lab. Performance of the work is expected to support federal cybersecurity objectives, though no specific location is designated for performance. All deliverables must be completed in accordance with federal standards for information security and systems integration, with the successful contractor responsible for end-to-end implementation including testing, documentation, and stakeholder training.

Custom Computer Programming Services

POSTED

DEADLINE

ServiceNow CMDB Maturation and ConfigurationThe contract seeks to mature and configure the ServiceNow CMDB by defining and implementing a robust structure that includes classification of configuration items, their lifecycles, and seamless integration with asset and vulnerability data sources to ensure accurate, real-time tracking across the enterprise. The work involves establishing CI classes that align with operational needs, defining state transitions and ownership rules for each class, and connecting the CMDB to existing systems to synchronize asset inventories and security vulnerability information, thereby enhancing decision-making and compliance reporting. This subcontract is issued under the SBA set-aside program with a NAICS code of 541512, indicating it supports computer systems design services, and is managed by the National Energy Technology Lab under the Department of Energy. The solicitation was posted on July 28, 2026, with a response deadline of August 11, 2026, and performance is expected to occur at an unspecified location, consistent with federal contract practices for remote or decentralized technical work. The focus is on delivering a scalable, integrated CMDB that enables improved IT operations, risk management, and audit readiness through reliable data governance and automated synchronization across systems.

Computer Systems Design Services

POSTED

DEADLINE

Onsite Operator TrainingThe contract is for comprehensive onsite training for up to four operators on the operation, maintenance, and safety procedures of an LA-ICP-MS system, with training to be delivered directly at the customer's location. The training is intended to ensure personnel are fully capable of safely and effectively managing the system’s day-to-day functions and long-term upkeep. The solicitation is classified as a subcontract under NAICS code 611430, which pertains to professional and management development training, and is managed by the National Energy Technology Laboratory under the Department of Energy. Interested parties must submit proposals by August 11, 2026, at 8:30 PM, following the posting date of July 28, 2026. The place of performance and organizational details are unspecified, but all training activities must occur onsite, and the contract does not indicate any set-aside provisions for small businesses or other categories.

Professional and Management Development Training

POSTED

DEADLINE

Installation and IQ/OQ ServicesThe contract requires the onsite installation, calibration, and performance qualification of a laser ablation inductively coupled plasma mass spectrometry system at the National Energy Technology Laboratory in Pittsburgh. This includes full delivery, setup, and commissioning of the equipment, along with execution of installation qualification and operational qualification procedures to ensure the system meets all technical specifications and regulatory standards. The scope encompasses all activities necessary to bring the LA-ICP-MS system into full operational readiness, including testing, documentation, and formal certification of performance. The work must be performed at the NETL facility, with the contractor responsible for managing logistics, safety, and compliance throughout the project lifecycle. The solicitation is open for response until August 11, 2026, under a subcontract structure tied to NAICS code 811212 for scientific and technical services, and is managed by the Department of Energy through its National Energy Technology Laboratory.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Scientific Software and Control SystemsThe contract involves the supply and integration of specialized control software for an ICP-MS and laser ablation system, encompassing comprehensive data acquisition, analysis, and reporting functionalities. This subcontract is focused on delivering a unified software solution that ensures seamless operation of the analytical instruments, enabling precise instrumental control and reliable data output for scientific research applications. The software must be fully compatible with existing hardware and capable of streamlining workflows from sample input through result generation. This solicitation is issued by the National Energy Technology Laboratory under the U.S. Department of Energy, with a NAICS code of 511210 indicating software publishing and related services. It is posted for bid on July 28, 2026, and responses are due by August 11, 2026. The place of performance and specific location details are not provided, and no set-aside provisions apply. All work is expected to align with the lab’s technical requirements for high-precision analytical instrumentation, requiring vendors to demonstrate proven capability in scientific software development and system integration.

Software Publishers

POSTED

DEADLINE

Recirculating Chiller and Power Conditioning Unit SupplyThe contract calls for the supply of a recirculating chiller and power conditioning system specifically engineered to maintain stable operating conditions for an ICP-MS and laser ablation system, ensuring precise and reliable analytical performance. The equipment must meet stringent technical requirements to manage thermal loads and mitigate power fluctuations that could compromise data accuracy or damage sensitive instrumentation. The procurement is structured as a subcontract under the National Energy Technology Lab, part of the Department of Energy, and falls under NAICS code 333415 for industrial machinery manufacturing. All proposals must be submitted by 8:30 PM Eastern Time on August 11, 2026, with the solicitation having been posted on July 28, 2026. No specific place of performance or set-aside provisions are detailed, and the contract does not indicate any small business set-asides or geographic restrictions, leaving full eligibility open to qualified vendors capable of delivering certified, high-precision systems compliant with laboratory-grade operational standards.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

Sample Introduction and Autosampler Kit SupplyThe contract solicits the supply of a specialized geological sample introduction kit constructed from hydrofluoric acid resistant materials, designed for use in high-throughput inductively coupled plasma mass spectrometry applications. This kit will enable safe and efficient handling of samples containing highly corrosive substances, ensuring durability and analytical accuracy. Alongside the introduction kit, a dual-rinse autosampler is required to automate sample loading with minimal cross-contamination, supporting increased operational efficiency and precision in repetitive analytical workflows. Both components must meet stringent performance standards for compatibility with ICP-MS instrumentation and must withstand prolonged exposure to aggressive chemical environments without degradation. This subcontract is issued by the National Energy Technology Laboratory under the Department of Energy and falls under the NAICS code 339112, indicating classification within the other scientific and manufacturing industries. The solicitation was posted on July 28, 2026, with a firm response deadline of August 11, 2026, at 8:30 PM Eastern Time. While no specific place of performance or point of contact is detailed, the work will likely involve delivery and integration within DOE-operated laboratories or facilities conducting geological analytical research. The contract aims to upgrade critical analytical infrastructure by enabling reliable, high-volume sample processing under chemically extreme conditions.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

Femtosecond Laser Ablation Unit SupplyThe contract seeks the supply of a femtosecond laser ablation unit designed for seamless integration with an ICP-MS system to enable high-precision sample introduction, depth profiling, and spatial mapping capabilities. The system must deliver exceptional analytical resolution and reproducibility for applications requiring micro-scale elemental analysis, with emphasis on stability, minimal thermal impact, and compatibility with existing ICP-MS hardware. The subcontract is issued under NAICS code 333318 by the National Energy Technology Laboratory, a division of the Department of Energy, and the performance location is not specified. Bidders must submit responses by August 11, 2026, at 8:30 p.m. Eastern Time, with no set-aside provisions indicated. The contract does not specify a point of contact, and all relevant information is accessible via the provided FedConnect link.

Other Commercial and Service Industry Machinery Manufacturing

POSTED

DEADLINE

ICP-MS Instrument SupplyThe contract pertains to the supply of a new high-performance Inductively Coupled Plasma Mass Spectrometer designed for advanced multi-element analysis, depth profiling, and spatial mapping of geological and solid samples. The instrument must meet rigorous technical specifications to enable precise detection and quantification of trace elements across diverse sample matrices, supporting cutting-edge research in earth sciences and materials characterization. Performance criteria will emphasize sensitivity, resolution, stability, and compatibility with laser ablation and other sampling techniques for high-resolution spatial data acquisition. This is a subcontract issued by the National Energy Technology Laboratory under the U.S. Department of Energy, with a solicitation posted on July 28, 2026, and a response deadline of August 11, 2026. The NAICS code 334516 identifies the procurement as related to laboratory analytical instrument manufacturing. The place of performance and point of contact details are unspecified, and no set-aside provisions are indicated, meaning the contract is open to all qualified respondents. The technical deliverable must be fully commissioned and operational upon delivery, with any required training, calibration, and documentation provided to ensure seamless integration into existing laboratory workflows.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE