This Solicitation opportunity from Department Of Defense was posted on July 27, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

GASKET

Closed

SPE7L1-26-T-880BFederal

Submission Closed08/07/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE4A7-26-R-0778

Solicitation SPE4A7-26-R-0778 is a request for an Indefinite Quantity Contract (IQC) issued by DLA Aviation for the procurement of flexible couplings, identified as NSN 1660-00-560-4009. The contract features a three-year base period with a guaranteed minimum quantity of 42 units and an estimated annual quantity of 120 units. This item is designated as a Critical Application Item, with approved part numbers from The Boeing Company, Arrowhead Products Corp, and Flexible Technologies Inc. The required delivery schedule is 365 days after receipt of order, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including source approval requests and tailored higher-level quality requirements. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization follows RP001. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Additionally, the contractor must complete a CMMC Level 2 self-assessment and comply with DFARS regulations regarding covered defense information and the Buy American program. Item Unique Identification is not required per the service customer's request. Payment and receiving reports must be processed electronically through the Wide Area Workflow system.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE7L3-26-T-237G

This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of 407 units of preformed packing under NSN 5330-00-922-5947. The contract is open for full and open competition with a delivery requirement of 46 days after the order is placed. The items must be completely free of asbestos, and any alternative materials must be approved according to specific regulatory clauses. The procurement is subject to several technical and quality requirements, including DLA packaging standards and configuration change management protocols. Notably, the items are classified as Type I (Code Y) with a non-extendable shelf life of 180 months. All suppliers must adhere to the DLA Master List of Technical and Quality Requirements and comply with regulations regarding covered defense information and the removal of government identification from non-accepted supplies.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Solicitation # 7017777381

This sources-sought notice issued by DLA Land and Maritime is for a Seal Assembly Kit under NSN 5330-014629466. The current approved source is Curtiss-Wright Electro-Mechanical Corp. Due to the AMC/AMSC designation of 3D, the item is typically procured from the actual manufacturer because the technical data required for competitive solicitation is not economically available or physically accessible. The agency is seeking additional qualified sources capable of manufacturing these items. Interested companies may submit information to Contract Specialist Amber Rohly by the response deadline of September 19, 2026. To become an approved source, applicants must submit a Source Approval Request package through the DLA Land and Maritime program to demonstrate that their product meets or exceeds the quality of the original equipment manufacturer.

DLA Land And Maritime

POSTED

DEADLINE

53--PARTS KIT,SEAL REPLACE

Solicitation # SPE7L3-26-T-248P

Solicitation SPE7L3-26-T-248P is a request for quotations issued by the Department of Defense, specifically DLA Land and Maritime, for the procurement of three seal replacement parts kits for mechanical equipment, identified by NSN 5330015981569. This is a fixed-price contract designated as a total small business set-aside under NAICS code 339991. The approved source is listed as 0B9E8 70J600-5. Quotes must be submitted electronically via the DIBBS system by the deadline of September 21, 2026. The required delivery date is November 11, 2027, with a need ship date of March 9, 2027, and a delivery period of 168 days. Delivery is FOB Destination to DLA Distribution San Joaquin in Tracy, California. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific requirements for UV-sensitive items to be sealed in opaque bags per MIL-DTL-117. The contract incorporates various FAR and DFARS clauses, including the Buy American Act and Berry Amendment restrictions. Invoicing and receiving reports must be processed through the Wide Area WorkFlow system. Award may be determined via an automated process, and a HUBZone price evaluation preference may be applied.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Solicitation # SPE7L3-26-T-247F

Solicitation SPE7L3-26-T-247F is a Request for Quotations issued by the Department of Defense, specifically DLA Land and Maritime, for the procurement of 11 inflatable seals identified by NSN 5330002252287. This procurement is set aside exclusively for SBA-certified Women-Owned Small Business (WOSB) concerns. The solicitation was posted on September 11, 2026, with a response deadline of September 21, 2026. Quotes must be submitted electronically via the DIBBS system. The required delivery date is April 11, 2027, with a need ship date of January 22, 2027, and shipping terms are FOB Destination to the DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality standards, including MIL-STD-129 for marking and MIL-STD-130N for identification. Due to the nature of the items, they must be packaged in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117 and comply with MIL-STD-2073-1E and RP001 for palletization. All supplied items must be free of asbestos. Offerors must comply with the Buy American Act and the Berry Amendment, providing full disclosure if non-domestic materials are used. Payment and invoicing will be processed electronically through the Wide Area WorkFlow (WAWF) system. The award may be processed as an automated award, and offerors are encouraged to provide quantity ranges in their quotes.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-10U5

Solicitation SPE7L1-26-T-10U5 is a Request for Quotations issued by the Department of Defense, DLA Land and Maritime, for the procurement of 14 units of O-rings under NSN 5331014745530. This is designated as a critical application item under NAICS code 339991. The procurement is managed by the Land Supply Chain office in Columbus, Ohio, with a response deadline of September 21, 2026. Quotes must be submitted electronically via the DIBBS system. The approved source for this item is 0AZ22 V24509-20-07-18. The delivery requirement is set for 147 days after order, with a need ship date of February 16, 2027, and delivery to DLA Distribution San Joaquin in Tracy, California. The contract specifies FOB Origin terms, while inspection and acceptance will occur at the destination per FAR 52.246-1. Packaging must adhere to MIL-STD-2073-1E and marking must comply with MIL-STD-129. Invoicing and payment processing are required through the Wide Area WorkFlow system. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. The solicitation incorporates several FAR and DFARS clauses, including those regarding equal opportunity for workers with disabilities, combating trafficking in persons, and sustainable products. Offerors are assumed to provide supplies of domestic origin unless otherwise indicated.

POSTED

DEADLINE

Solicitation # SPE7LX-26-U-002P

Solicitation SPE7LX-26-U-002P is a request for quotations from the Department of Defense, specifically the Strategic Acquisition Program Directorate under DLA Land and Maritime, for the procurement of gaskets identified by NSN 5330150110674. This procurement may result in a unilateral Indefinite Delivery Contract with a one-year term or until the aggregate total of orders reaches a maximum value of 350,000.00 dollars. The estimated annual demand is 157 units, with a guaranteed minimum quantity of 23 and an expected average of 12 orders per year. Delivery is required within 97 days of order, with shipments directed to various CONUS and OCONUS DLA Depots. The contract requires strict adherence to packaging and marking standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and MIL-DTL-117 for the use of medium duty, waterproof, greaseproof, opaque bags to prevent UV deterioration. All quotes must be submitted electronically via the DIBBS portal by September 25, 2026. Award evaluation will be based on the price quoted for the estimated annual demand. Additionally, contractors must comply with domestic material restrictions, including the Buy American Act and the Berry Amendment, and utilize the Wide Area Workflow system for all invoicing and receiving reports. Inspection and acceptance will occur at the destination.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

SEAL,AIR,NONAIRCRAF — 2835014700838 — SPRMM126QHE54

Solicitation # SPRMM126QHE54

This solicitation, issued by DLA Mechanicsburg under FAR Part 12 and FAR Part 18 Emergency Acquisition Flexibilities, seeks quotes for the manufacture of non-aircraft air seals. Award evaluations will be based on the Lowest Price Technically Acceptable criteria. The contract requires strict adherence to item unique identification and marking standards per MIL-STD-130, and packaging must comply with MIL-STD 2073. Contractors must provide the Original Equipment Manufacturer details if they are not the manufacturer and must submit invoices and receiving reports electronically via PIEE-WAWF. The agreement includes specific protocols for design changes, requiring a coded notification system for any substitutions. Additionally, the contract mandates that production facility changes be approved in writing by the Contracting Officer and may require a price reduction to cover administrative costs.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Specialized Gasketing & Sealing Materials Supply

Procurement-Goods & Services

POSTED

DEADLINE

O-Ring Supply (NSN 5331002639540)

POSTED

DEADLINE

Supply of Critical Application Gaskets

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Gaskets (NSN 5330017193193)

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

1 day ago

DEADLINE

in 10 days

AI Contract Overview

The contract specifies the procurement of a gasket with NSN 5330-01-344-9582 and part number MM432136, quantity one unit, to be delivered within five days to Fort Bliss, Texas, under solicitation SPE7L1-26-T-880B. Delivery is FOB origin, with zero variance permitted in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including use of a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117 Type II Class C Style 1 for UV-sensitive items, with no asbestos permitted. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The item must be marked in accordance with MIL-STD-130N and palletized per DLA packaging requirements. Shipments are to be made via traceable freight, not parcel post, to the specified Fort Bliss address, with the federal supply classification and unit of issue governed by DLA standards. The contract references the DLA Master List of Technical and Quality Requirements for all technical and quality clauses identified by R or I numbers, with revisions controlled by the solicitation issue date. The designated point of contact is Kristina Derry, and the required delivery date is July 24, 2026.

General Info

One gasket NSN 5330-01-344-9582 delivered FOB origin to Fort Bliss by July 24, 2026, per strict military packaging and inspection standards.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

BLDG 2527 CHAFFEE RD, FORT BLISS, TX, 79916-6844, USA

Set-Aside

NONE

Documents

(1)

Request for Quotations SPE7L1-26-T-880B

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJul 27

Solicitation

Response DeadlineAug 7

Deadline has passed

Submission Closed

08/07/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → LAND SUPPLY CHAIN

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → LAND SUPPLY CHAIN

View Agency Profile

Office AddressUSA

Contacts

Kristina Derry

contact@example.gov

+1 (555) 000-0000

Full Description

GASKET
GASKET
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
NO ASBESTOS AS DEFINED IN FED-STD-313 IS PERMITTED IN THIS ITEM
MULTIQUIP INC. 0NH46 P/N MM432136
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017622997 0001 EA 1.000
NSN/MATERIAL:5330013449582
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
SPE7L1-26-T-880B
SECTION B
PR: 7017622997 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:EA CUSH/DUNN MAT:HB CUSH/DUNN THKNESS:A
UNIT CONT:BE OPI:M
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS
(NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
BULK BREAK POINT:
W45QQ9
W6YP USALRCTR FT BLISS
BLDG 2527 CHAFFEE ROAD
FORT BLISS TX 79916-2527
US
RDD(3-POS RDD)/NMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W91X2C
W6YP USALRCTR FT BLISS
BLDG 2527 CHAFFEE RD
FORT BLISS TX 79916-6844
US
MARKFOR
W91X2C
W6YP USALRCTR FT BLISS
BLDG 2527 CHAFFEE RD
FORT BLISS TX 79916-6844
US
SPE7L1-26-T-880B
SECTION B
PR: 7017622997 PRLI: 0001 CONT’D
M/F: (TCN) W91X2C61970004
RDD: N
PROJ: 0D1 TP 1
SUPP ADD: W45NSU SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A3A DIST: ADV: FC: 61
Need Ship Date:00/00/0000 Original Required Delivery Date:07/24/2026
SPE7L1-26-T-880B NSN/Part Number: 5330-01-344-9582 Quantity: 1 EA Purchase Request: 7017622997QTY: 1 Delivery: 5 days ADO