Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

GASKET

Active
SPE7L3-26-T-125XFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 313 gaskets with part number 1-16717 and NSN 5330-00-406-5278, issued under solicitation SPE7L3-26-T-125X by the Department of Defense through the Land Supplier Operations Vehicle Support office. Delivery is required within 67 days after delivery order issuance, with responses due by August 3, 2026. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and the applicable revision is controlled by the solicitation issue date. The gasket must contain no asbestos as defined in Fed-Std-313 and must not have any intentional addition of mercury or mercury-containing compounds, with limited exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or specifically designated chemical reagents. Any portable fluorescent lamps or instruments containing mercury must be shock-proof and include a secondary containment boundary as specified by NAVSEA 5100-003D. All supplies must be free of government identification if not accepted. The place of performance is New Cumberland, PA 17070-5002, and primary point of contact is Susan Diamond at DLA, reachable via email and phone.

General Info

Procure 313 asbestos-free, mercury-restricted gaskets with delivery in 67 days to New Cumberland, PA by August 3, 2026.

Agency

Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPTView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE7L3-26-T-125X.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT
View Agency Profile
Office AddressUS
Contacts
Susan Diamond
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
GASKET
GASKET
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
HATCO CORP 20087
MILWAUKEE WIS
PN 1-16717
NO ASBESTOS AS DEFINED IN FED-STD-313 IS
PERMITTED IN THIS ITEM
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
ADEQUATE DATA FOR NSN/Part Number: 5330-00-406-5278 Quantity: 313 EA Purchase Request: 7017602269QTY: 313 Delivery: 67 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
DIBBS
GASKETThis contract is for the procurement of a gasket, identified by NSN 5330-01-258-2599 and part number 962M, with a quantity of 115 units, to be delivered FOB origin within 110 days of contract award. The item is designated as a critical application component and must comply strictly with DLA packaging and technical requirements, including adherence to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for procurement packaging standards. The supply must be sealed in a medium-duty, waterproof, greaseproof, opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, especially for direct vendor deliveries, foreign military sales, and stock shipments. The contract prohibits intentional addition of mercury or mercury-containing compounds except in specific functional applications like batteries, fluorescent lamps, sensors, and weapon systems, with additional containment and shock-proof requirements for portable items, as defined by NAVSEA 5100-003D. Asbestos is strictly forbidden under FED-STD-313 definitions. Delivery must be made to the DLA Distribution center in New Cumberland, Pennsylvania, following all hazardous material shipping protocols outlined in DLAD Proc Note C19 and C20. The unit price is $115.00 per unit, totaling $13,225.00, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and all packaging must include the specified packing methods and containment codes. The solicitation number is SPE7L3-26-T-127E, with a response deadline of August 3, 2026, and a need ship date of November 22, 2026, and original delivery completion by December 31, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in RA001.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
GASKET, SPIRAL WOUNDThe contract is for eight spiral wound gaskets with part number I-1-1-1 and NSN 5330-01-379-4346, supplied by Bird-Johnson Co. of Walpole, MA, under solicitation SPE7L3-26-T-128A. Delivery is required within 168 days of award, and the item must comply with DLA packaging requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements, which governs compliance based on the solicitation or award date depending on acquisition size. The gasket must contain no asbestos as defined in FED-STD-313, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact with the hardware, except for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents. Any portable fluorescent lamps or instruments containing mercury must be shock-proof and feature a secondary containment boundary per NAVSEA 5100-003D. The contract falls under NAICS code 339991, is managed by the Department of Defense’s Land Supplier Operations Vehicle Support, with performance occurring in Tracy, CA, and inquiries should be directed to Susan Diamond at DLA.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
GASKETThe contract pertains to the procurement of a gasket with NSN 5330-01-479-9408 and part number 032757, requiring a quantity of 28 units to be delivered FOB origin within 106 days, with no variance allowed in quantity. Delivery must be made to the DLA Distribution facility in New Cumberland, Pennsylvania, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-DTL-117, Type II, Class C, Style 1, ensuring the item is sealed in a medium-duty, waterproof, greaseproof, and opaque bag to protect against UV exposure. Marking follows MIL-STD-129 with the special instruction “Do not bend,” and palletization adheres to DLA packaging standards. The item is designated as a critical application item, and all technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Transportation instructions are governed by DLAD Proc Notes C19 and C20. The contract is issued under solicitation SPE7L3-26-T-125S, with a response deadline of August 3, 2026, and the required ship date is November 18, 2026, for an original delivery requirement of December 20, 2026. Unit of issue is each, priced at $28.00 per unit, with a total contract value of $784. The point of contact is Susan Diamond, reachable at DLA email and phone provided.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN ENCASEDThe contract pertains to the procurement of 33 units of SEAL, PLAIN ENCASED with NSN 5330-01-096-9861 under solicitation SPE7L3-26-T-129U, issued by the Department of Defense’s Land Supplier Operations Vehicle Support office. The requirement is a total small business set-aside under FAR 19.5, with responses due by August 3, 2026, and delivery expected within 134 days after order placement. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date. Packaging must comply with DLA procurement standards, and non-accepted supplies must have all government identification removed prior to return. The item includes technical data subject to export controls under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons without prior authorization from the Department of State or Commerce. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, who have completed mandatory DLA training and completed the export-controlled data questionnaire. The place of performance is Cherry Point, NC, with primary point of contact Susan Diamond at DLA.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
RUBBER ROUND SECTIOThe contract pertains to the procurement of four rubber round sections identified by NSN 5330-01-508-6021, with a delivery deadline of 168 days after award. The item falls under Federal Supply Classifications 5330/5331 and must be packaged in a medium duty, waterproof, greaseproof, opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1 to protect against ultraviolet degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. The item has a non-extendable shelf life of 60 months, and at the time of delivery to the government depot, at least 85 percent of that shelf life must remain. The product must be free of asbestos, and any substitute materials require formal approval under Clause L30 and Provision 4 conditions. Mercury and mercury-containing compounds are strictly prohibited unless used in approved functional applications such as batteries, fluorescent lights, sensors, weapon systems, or NAVSEA-specified reagents; portable fluorescent lamps and instruments containing mercury must include shock-proof construction and a secondary containment barrier as per NAVSEA 5100-003D. Class I ozone-depleting chemicals are entirely banned, and any alternative chemicals must be submitted for approval unless explicitly authorized by the specifications. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation issuance or award date depending on acquisition size. This solicitation is issued under contract number SPE7L3-26-T-131Y, with responses due by August 3, 2026, and the point of contact is Susan Diamond at DLA.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
GASKETThis contract pertains to the supply of a gasket with part number 2260023 and NSN 5330-01-450-7576, procured by the Defense Logistics Agency for a quantity of 12 units at a unit price of $12.00, totaling $144.00. The item must be delivered FOB origin within 168 days, with inspection and acceptance occurring at the destination under MIL-STD-2073-1E packaging standards, using a medium-duty, waterproof, greaseproof, and opaque bag compliant with MIL-DTL-117 Type II Class C Style 1 due to the material’s sensitivity to ultraviolet exposure. Packaging and marking must adhere to MIL-STD-129 with no special marking required. The supplier, Barnes John S Corp, is prohibited from intentionally adding mercury or mercury-containing compounds to the gasket or allowing direct contact, except for functional uses in batteries, fluorescent lights, sensors, weapon systems, or chemical reagents specified by NAVSEA; portable devices containing mercury must include shock-proof construction and a secondary containment boundary in accordance with NAVSEA 5100-003D. Delivery is to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of January 19, 2027. All technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue or award date depending on acquisition size. The contract uses the DoD authorized unit of issue, and transportation guidelines are governed by DLAD Proc Note C19 and C20.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
RETAINER, PACKINGThis contract pertains to the procurement of 12,428 units of RETAINER, PACKING with NSN 5330-00-808-2337 under solicitation SPE7M4-26-T-277F, issued by the Department of Defense’s Fluid Handling Division. The item is classified as a commercial item and must comply with applicable military or consensus non-government part standards, with manufacturing after the solicitation date required to adhere to the current revision of the governing standard; prior revisions remain acceptable for hardware previously produced. Strict prohibitions are in place against the intentional addition of mercury or mercury-containing compounds, except for specific functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents; portable mercury-containing devices must be shock-proof and include a secondary containment boundary as per NAVSEA 5100-003D. Asbestos as defined in FED-STD-313 is explicitly forbidden. The item is excluded from the First Destination Packaging Program and is not eligible for standard commercial packaging, with packaging requirements governed by the DLA Master List of Technical and Quality Requirements referenced in the solicitation, using the revision in effect on the solicitation issuance date. Full and open competition applies, with no set-aside classification, and delivery is required within 193 days of award. All hardware must meet technical and quality criteria incorporated by reference from the DLA Master List, identifiable by R or I numbers, and must comply with applicable defense information handling protocols under RD003. The contract is governed by the Defense Logistics Agency’s acquisition framework, with the point of contact being Blake Tushar, and performance located in Jacksonville, FL, with a response deadline of August 3, 2026. The solicitation was posted on July 23, 2026, and is accessible via the DIBBS portal, with the NSN and quantity tied to purchase request 7017604661. The NAICS code 339991 indicates classification under other miscellaneous manufacturing.
FLUID HANDLING DIVISION

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
GASKETThis contract is for the procurement of gaskets identified by NSN 5330014666498 and part number 8C3089 from Caterpillar Inc and 4KK336 from Oshkosh Defense LLC, with a total quantity of 141 units split across two line items: 67 units at $74.00 each and 74 units at $67.00 each. All items must comply with strict packaging standards per MIL-STD-2073-1E, requiring medium duty, waterproof, greaseproof, opaque bags conforming to MIL-DTL-117, Type II, Class C, Style 1, and must be marked per MIL-STD-129 with no special marking codes. The items are classified as critical application items and are prohibited from containing asbestos as defined by FED-STD-313. Packaging and shipping must adhere to hazardous materials protocols, and delivery is FOB origin with no tolerance for quantity variance. Inspection and acceptance occur at the destination. Two delivery points are specified: Barstow, CA for 67 units with a need ship date of January 11, 2027, and New Cumberland, PA for 74 units with a need ship date of July 8, 2026, both with a required delivery date of October 22, 2026. The contract is governed by DLA packaging and quality requirements referenced from their Master List, and all units of issue follow DoD standards. The solicitation number is SPE7L3-26-T-128Z, issued under NAICS code 339991, with responses due by August 3, 2026.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC SPECIThe contract pertains to a nonmetallic, specially shaped seal with NSN 5330016101826 and part number 6023737, required in a quantity of one unit for delivery within ten days from the date of award. Delivery is FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and container types, with marking adhering strictly to MIL-STD-129 and no special marking required. The seal is intended for use by Am General LLC and must meet all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. The shipment is directed to Camp Humphreys, Building P6953 in Pyeongtaek, South Korea, under a RDD/ANMCS shipment designation with freight and marking instructions explicitly defined. Transportation and shipping procedures follow DLAD Proc Notes C19 and C20, and the supply is linked to procurement request 7017584285 and contract SPE7L4-26-T-5742. The original required delivery date is July 24, 2026, with solicitation response deadlines and posting dates aligned to ensure timely procurement under the Department of Defense’s acquisition framework, governed by DoD unit of issue standards and federal procurement protocols.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
O-RINGThe contract is for the procurement of 70 O-Rings identified by NSN 5331-01-016-0457, under solicitation SPE7L1-26-T-865Q, with a delivery requirement of 168 days from award. All supplies must comply with DLA Packaging Requirements for Procurement and incorporate technical and quality standards referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item must be free of asbestos as defined in FED-STD-313 and must not contain mercury or mercury-containing compounds except in specific exempted applications such as functional batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical analysis reagents specified by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shock-proof and include a secondary containment boundary in accordance with NAVSEA 5100-003D. Government identification must be removed from any non-accepted supplies. The contract is managed by the Department of Defense’s Land Supply Chain with performance located in Tracy, California, 95304-5000, and primary point of contact is George Mitchell at george.mitchell@dla.mil or 614-908-5374. The solicitation was posted on July 23, 2026, with response deadline set for August 3, 2026, under NAICS code 339991.
LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
PACKING ASSORTMENT, PREThis contract specifies the procurement of a packing assortment, preformed, under the Department of Defense’s Defense Logistics Agency with the solicitation number SPE7LX-26-U-8978 and NSN 5330-01-236-0626. The item is identified by part number 75191-09P from Parker-Hannifin Corporation and is subject to DLA’s packaging requirements, including compliance with MIL-STD-2073-1E for prepare for delivery, MIL-STD-129 for marking, and MIL-DTL-117, Type II, Class C, Style 1 for a medium duty, waterproof, greaseproof, opaque bag — a requirement that applies to direct vendor delivery, foreign military sales, and stock shipments. The contract mandates zero tolerance for asbestos per FED-STD-313 and requires all packaging and palletization to adhere strictly to DLA standards. Delivery is to be made FOB origin within 60 days, with no variance allowed in quantity, and inspection and acceptance occur at destination. The contract includes a unit price of $94.00 per AT for a total quantity of 94 units, with the total price reflected accordingly. Packaging details specify the use of internal container D3, packing code U, and no special marking. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revision control tied to the solicitation issue date for simplified acquisitions and RFP issue date for large acquisitions unless amended. The procurement falls under Federal Supply Class 5330/5331 and NAICS code 339991, with delivery subject to the DoD authorized unit of issue. The primary point of contact is Theodore Misiolek, and the solicitation response deadline is August 7, 2026, with an estimated quantity that may not be fully purchased by the IDC.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
SEAL, MOTOR PUMPThe contract pertains to the procurement of nine motor pump seals with part number 55764 and NSN 5330-00-996-7425, issued under solicitation SPE7L3-26-T-126P by the Department of Defense through Land Supplier Operations Vehicle Support. The item must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, with the applicable revision controlled by the solicitation issue or award date depending on the acquisition size. Strict prohibition exists against the use of asbestos as defined in Fed-Std-313, and any non-accepted supplies must have all government identification removed prior to return. The manufacturer is Crane Co. based in Burbank, CA, and the delivery location is Cherry Point, NC, with a delivery timeline of 168 days after order. The solicitation was posted on July 23, 2026, with responses due by August 3, 2026, and is classified under NAICS code 339991 for other miscellaneous manufacturing. Primary point of contact is Susan Diamond, reachable via email and phone provided.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS VEHICLE SPT

Same awarding agency

NAICS: 336330
New
DIBBS
VALVE, RELAY, AIR PRESSUThis contract specifies the procurement of 87 units of a valve, relay, air pressure, identified by NSN 2530-01-692-5359, under solicitation SPE7L3-26-T-133E, with a response deadline of August 3, 2026, and a delivery requirement of 258 days after award. The acquisition is a total small business set-aside under NAICS code 336330, managed by the Department of Defense’s Land Supplier Operations Vehicle Support agency, with performance located in New Cumberland, Pennsylvania. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition type. Packaging must comply with DLA standards, and any proposed changes to configuration require formal engineering change proposals or variance requests. The item includes technical data subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including U.S. subsidiaries and foreign nationals, even within the United States. Access to this controlled data is restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed DLA-mandated export control training, and have received formal approval from the DLA controlling authority. DFARS 252.225-7048 governs compliance with these restrictions, and removal of government identification from non-accepted items is also prohibited.
Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336992
New
DIBBS
SUPPORT, RETRACTABLE, TRThe contract is for the procurement of 27 retractable trailer supports identified by NSN 2590-01-490-4398 under solicitation SPE7L3-26-T-129C, issued by the Department of Defense through the Defense Logistics Agency. The requirement is structured in two line items: three units to be delivered to the DLA Distribution Puget Sound facility in Bremerton, Washington, and twenty-four units to be delivered to the DLA Distribution New Cumberland facility in New Cumberland, Pennsylvania. Both deliveries are governed by a 100-day delivery window, with FOB origin terms meaning the supplier assumes responsibility for packaging and transport costs until the point of origin. The quantity is fixed with zero variance allowed and inspection and acceptance occur at the point of origin. Packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with palletization following DLA’s RP001 standards. Special marking is not required. The items are to be shipped in finished goods containers with dry cushioning and dunnage materials, and all documentation must align with the approved DLA packaging protocols. The original required delivery date is January 13, 2027, with need-by dates of July 23, 2026, for Bremerton and November 19, 2026, for New Cumberland. The solicitation was set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 336992, with Matthew Curry as the primary point of contact.
Military Armored Vehicle, Tank, and Tank Component Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333310
New
DIBBS
RETAINER ASSEMBLY, QUICThe contract pertains to the procurement of a right-hand retainer assembly, specifically designed for use on the Oshkosh Wrecker Model M984E1, with a total quantity of 39 units. The item is identified by NSN 2590-01-222-5436 and is subject to a delivery requirement of 112 days after award. The solicitation number is SPE7L3-26-T-127A, issued by the Department of Defense under the Land Supplier Operations Vehicle Support organization, with performance to occur in New Cumberland, Pennsylvania. Full and open competition is permitted, and technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue or award date depending on acquisition size. The contracting entity must comply with stringent cybersecurity standards, including CMMC Level 2 certification as a certified third-party assessment organization, and packaging must adhere to DLA procurement requirements. Configuration changes require formal engineering change proposals and variance requests per established protocols. The item incorporates export-controlled technical data governed by ITAR or EAR, restricting access and dissemination to only those contractors approved under the US/Canada Joint Certification Program who have completed mandatory DOD export control training and been formally authorized by DLA. Government identification must be removed from any non-accepted supplies, and inspection and acceptance are to occur at the manufacturer’s origin. The point of contact for inquiries is Matthew Curry, with a response deadline of August 3, 2026.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339991
New
DIBBS
PARTS KIT, SEAL REPLThis contract is for a Parts Kit, Seal Replacement, designated by the NSN 5330-99-290-7134 and part number set 10300 from Advanced Component Technology Ltd, with a quantity of six units required. The item is classified under Federal Supply Classifications 5330/5331 and must be packaged in accordance with MIL-DTL-117, Type II, Class C, Style 1, using a medium duty, waterproof, greaseproof, opaque bag to protect against UV deterioration. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must follow DLA Packaging Requirements. The item is excluded from the First Destination Packaging Program and is not eligible for standard commercial packaging. Delivery is FOB Origin, with a required delivery date of December 19, 2026, and a ship date of January 19, 2027, allowing for a 168-day lead time. The sole point of delivery is the DLA Distribution San Joaquin warehouse in Tracy, CA, and the unit price is $6.00 per unit for a total of $36.00. All technical and quality requirements are governed by the DLA Master List, and inspection and acceptance occur at the destination. The contract is issued under solicitation SPE7L3-26-T-129L with a NAICS code of 339991 and is managed by the Department of Defense, with Susan Diamond as the point of contact.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details