Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

GASKET

Active
SPE7L1-26-T-888UFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the supply of a single gasket identified by NSN 5330-01-674-1415, with delivery required within 20 days of award. The solicitation, issued under SPE7L1-26-T-888U, has a response deadline of August 10, 2026, and falls under NAICS code 339991 for other miscellaneous fabrication. Technical and quality requirements are defined by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, using a medium duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, applicable to all delivery types including direct vendor delivery, foreign military sales, and stock shipments. The item must be free of asbestos, and any alternative materials require approval under Clause L30 and Provision 4 conditions. Mercury or mercury-containing compounds are strictly prohibited unless part of functional components such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or approved chemical reagents specified by NAVSEA; portable devices containing mercury must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. The gasket is classified as a Type 2 (Code X) item with a shelf life of one month, extendable under RS001. Government identification must be removed from non-accepted supplies, and all packaging must adhere to DLA packaging standards.

General Info

Supply of one NSN 5330-01-674-1415 gasket, delivery in 20 days, no asbestos or mercury, MIL-DTL-117 packaging, Type 2 shelf life.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Kristina Derry
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
GASKET
GASKET
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS
(NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
RS049: Shelf life requirement RS001 for a TYPE 2 (CODE X) item with a shelf life of 1 month (extendable) applies to this item.
"ITEMS SUPPLIED MUST BE FREE OF ASBESTOS.
LISTED CODE AND PART NUMBERS CONTAINING ASBESTOS
ARE NO LONGER ACCEPTABLE, AND ANY ALTERNATIVE
ITEM/MATERIAL MUST BE APPROVED IN ACCORDANCE
WITH CLAUSE L30 AND PROVISION 4 CONDITIONS
FOR NSN/Part Number: 5330-01-674-1415 Quantity: 1 EA Purchase Request: 7017659166QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC ROUND
Solicitation # SPE7L4-26-T-5859
The contract specifies the procurement of a nonmetallic round seal with NSN 5330-01-717-7130 and part number 4380969-2, requiring a quantity of 31 units delivered FOB origin within 147 days, with no variance allowed in quantity. The product must be packaged and sealed in a medium-duty, waterproof, greaseproof, opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, applicable to direct vendor delivery, foreign military sales, and stock shipments. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must follow DLA packaging standards. Technical and quality requirements are governed by the DLA Master List, with revisions controlled based on acquisition type and solicitation amendments. The item falls under Federal Supply Classification 5330/5331 and is subject to hazardous material shipping regulations as defined by IP025. Delivery must be made to the DLA Distribution facility in New Cumberland, PA, with a need ship date of January 5, 2027, and the original required delivery date set for March 5, 2027. The contract is issued under solicitation SPE7L4-26-T-5859, with a unit price of $31.00 per unit and a total value of $961.00, and the point of contact for inquiries is Anna-Rachelle Betts at DLA.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-888K
The contract pertains to the procurement of a gasket identified by NSN 5330-01-266-4931, with a quantity of one unit, under solicitation number SPE7L1-26-T-888K. Delivery is required within 20 days after date of award, and responses must be submitted by August 10, 2026. The acquisition is governed by DLA packaging and technical requirements referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issue date or award date depending on the scale of the acquisition. The gasket must comply with strict material restrictions, including a complete prohibition on the intentional addition of mercury or mercury-containing compounds in direct contact with the item, except for specific exempted applications such as functional mercury in batteries, fluorescent lamps, sensors, weapon systems, or chemical reagents approved by NAVSEA. Portable fluorescent lamps or instruments containing mercury must include shock-proof design and a secondary containment barrier as mandated by NAVSEA 5100-003D. Additionally, the item must be entirely free of asbestos, with any previously approved asbestos-containing codes or part numbers now rejected unless replaced by an approved alternative under Clause L30 and Provision 4 conditions. The contract is administered by the Department of Defense’s Land Supply Chain through the DLA, with primary point of contact Kristina Derry, and performance location is designated as FPO with ZIP 09566.
LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
BACK-UP RING, PREFOR
Solicitation # SPE7L3-26-T-137N
This contract specifies the procurement of three back-up rings, preformed, with the national stock number 5330-01-706-2343 and part numbers 18-20418-12R1, 20140-ITEM-1.2, and 20421-ITEM-2 from RIX INDUSTRIES. The items must be delivered within 20 days to the USS HYMAN G RICKOVER (SSN 795) at FPO AE 09591 under FOB destination terms, with no variance allowed in quantity. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, using a medium duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, and all marking must adhere to MIL-STD-129. The end item is subject to stringent material restrictions, including a complete prohibition on intentional addition or direct contact with mercury or mercury-containing compounds, except for specific functional applications like batteries, fluorescent lights, sensors, weapon systems, or chemical reagents authorized by NAVSEA; portable devices containing mercury must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Asbestos is strictly prohibited per FED-STD-313. Packaging, marking, and shipping of hazardous materials must follow IP025 requirements, and all shipments must use traceable transport methods—parcel post is forbidden. The contract incorporates technical and quality requirements from the DLA Master List, and documentation for source approval must be submitted per RC001. All items are subject to inspection and acceptance at the delivery point, and the supplier is required to follow DLA packaging standards and military identification protocols per MIL-STD-130N.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
PACKING WITH RETAIN
Solicitation # SPE7L1-26-T-890D
The contract specifies the procurement of four units of a commercial item identified by NSN 5330-15-056-5578 under solicitation SPE7L1-26-T-890D, with a required delivery within five days of award. Packaging must adhere strictly to MIL-DTL-117, Type II, Class C, Style 1, requiring medium-duty, waterproof, greaseproof, and opaque bags to protect against UV degradation, as the item falls under Federal Supply Classifications 5330/5331 susceptible to UV damage. This packaging requirement applies uniformly across direct vendor deliveries, foreign military sales, and stock shipments. All items must be free of asbestos, with any alternative materials subject to approval under Clause L30 and Provision 4 conditions. The item must be identified per MIL-STD-130N, and any government markings on non-accepted supplies must be removed. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revision control based on solicitation or award date depending on acquisition size. The contract is managed by the Department of Defense’s Land Supply Chain, with Mariel Pugh as the primary point of contact, and responses are due by August 10, 2026.
LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
RUBBER SHEET, SOLID
Solicitation # SPE8E9-26-T-3270
The contract specifies the procurement of a solid rubber sheet measuring 36 inches square and 0.063 inch thick, with a Shore durometer range of 45.0 minimum to 55.0 maximum, and smooth surfaces on both sides. The material must be synthetic rubber, free of asbestos as defined in FED-STD-313, and cannot contain mercury or mercury-containing compounds except in limited functional applications such as batteries, fluorescent lights, sensors, controls, weapon systems, or specified chemical reagents approved by NAVSEA; portable devices containing mercury must be shock-proof with a secondary containment boundary. The item is classified as a Type I shelf-life product with a 12-month lifespan, requiring at least 85% of that life to remain at delivery, with cure and expiration dates marked per MIL-STD-129 in calendar quarter and year format. All shipments must comply with DLA packaging requirements and the technical and quality standards listed in the DLA Master List, with sampling performed in accordance with MIL-STD-1916, ASQ H1331, or a comparable zero-based plan, where acceptance requires zero non-conformances unless otherwise stated. The rubber sheet must be marked every three feet with the specification number, revision letter, type, class, and cure or manufacture date in quarter and year, with markings meeting MIL-STD-190 for performance, legibility, color, and environmental resistance. The contractor must certify understanding of bare item marking requirements prior to award. The NSN 9320-00-641-3051 is procured competitively under a federal specification, with one unit required for delivery within 20 days of award under solicitation SPE8E9-26-T-3270, issued by the Department of Defense’s Construction & Equipment MRO Service I, with primary point of contact Matthew Kruc.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
RETAINER, PACKING
Solicitation # SPE7L3-26-Q-1229
The contract pertains to the procurement of 43 retainer, packing units under solicitation SPE7L3-26-Q-1229, with a NSN of 5330-01-092-4889 and a purchase request number of 7016688602. Delivery is required within 90 days of award, and responses must be submitted by August 5, 2026. The item falls under the Federal Supply Classification 5330/5331, which includes stock numbers susceptible to degradation under ultraviolet exposure, necessitating packaging in a medium-duty, waterproof, greaseproof, and opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1. This packaging requirement applies to direct vendor delivery, foreign military sales, and stock shipments. All items must be free of asbestos, with any alternatives requiring approval under Clause L30 and Provision 4 conditions. The contract incorporates technical and quality standards identified by R or I numbers from the DLA Master List of Technical and Quality Requirements, and MIL-STD-130N governs the identification marking of military property. Covered defense information protocols are also in effect. The place of performance is New Cumberland, PA, 17070-5002, with Susan Diamond at DLA serving as the primary point of contact.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 16 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339991
New
DIBBS
RUBBER STRIP
Solicitation # SPE7L1-26-T-889W
The contract is for the procurement of rubber strip under the National Stock Number 5330-01-651-7290, with a unit of issue of one roll equaling fifty feet. The total quantity required is one roll, against purchase request 7017664656, with delivery mandated within twenty days after award. All items must be free of asbestos, and any prior materials containing asbestos are strictly prohibited; alternate materials require formal approval under Clause L30 and Provision 4 conditions. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, specifying a medium-duty, waterproof, greaseproof, opaque bag to protect against ultraviolet degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. The contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision controlled by the solicitation issue date or award date depending on acquisition size. Identification marking must adhere to MIL-STD-130N, and covered defense information provisions may apply. The solicitation is issued under SPE7L1-26-T-889W, posted on July 29, 2026, with responses due by August 10, 2026, and falls under NAICS code 339991. Performance is to be directed to FPO, 09556, with Kristina Derry of the Department of Defense’s Land Supply Chain as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7M4-26-T-291M
Offerors must comply with strict requirements regarding telecommunications equipment and domestic sourcing, including adherence to the Berry Amendment, Buy American Act, and DFARS clauses that restrict foreign-sourced materials, with a reduced threshold of $150,000 requiring full disclosure for non-domestic content. Submission of quantity ranges is strongly encouraged due to fluctuating demands, allowing buyers to consolidate or adjust orders without re-solicitation, though this does not apply to Auto IDC. All offerors must represent they will not provide covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016. Small business joint ventures must submit certifications for eligibility under specific small business categories as outlined in FAR provisions. Access to the Vendor Shipment Module is transitioning to require registration via the Account Management & Provisioning System, with mandatory schema updates for WebServices users to maintain shipping capabilities. Additive manufacturing is prohibited unless specifically approved by the contracting officer, and any offer including AM-produced items will be deemed ineligible. Offerors unable to quote by the closing date must submit a “No Bid” on DIBBS with an anticipated quote date or explanation to avoid assumption of non-responsiveness. The solicitation is for 309 O-rings under NSN 5331-00-800-8390, with a delivery requirement of 256 days ADO, and responses are due by August 10, 2026. APEX Accelerators offer free support for businesses seeking to enter government contracting.
FLUID HANDLING DIVISION

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
SEAL RING, METAL
Solicitation # SPE7L3-26-T-137U
The item is a metal seal ring with NSN 5330-01-074-4995, requested in a quantity of 18 units under purchase request 7017601986, with a delivery deadline of 161 days after contract award. The procurement is governed by Defense Logistics Agency packaging requirements and is subject to strict export control regulations under either ITAR or EAR, meaning any technical data associated with the item cannot be disclosed to foreign persons, including foreign nationals within the United States or overseas, without prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 applies to the handling of this controlled data, and only DLA contractors with an approved US/Canada Joint Certification Program certification, completed mandatory training on handling DOD export-controlled technical data, and approved by DLA authority may access such information. The solicitation number is SPE7L3-26-T-137U, posted on July 29, 2026, with responses due by August 10, 2026. The NAICS code is 339991, the contracting agency is the Department of Defense under Land Supplier Operations Vehicle Support, and the place of performance is Tracy, California, 95304-5000. Primary point of contact is Susan Diamond via email dla.flbb1prs@dla.mil and phone 6146925625.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN ENCASED
Solicitation # SPE7L3-26-T-137P
The contract pertains to the supply of two SEAL, PLAIN ENCASED items identified by NSN 5330-99-503-4788, with a delivery requirement of 20 days after award. The items must be packaged in a medium-duty, waterproof, greaseproof, and opaque bag compliant with MIL-DTL-117, Type II, Class C, Style 1, due to the sensitivity of the Federal Supply Classifications 5330/5331 to ultraviolet degradation. All supplied materials must be free of asbestos, and any previously approved asbestos-containing parts are no longer acceptable unless formally approved under Clause L30 and Provision 4 conditions. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition type. The contract enforces MIL-STD-130N for identification marking of U.S. military property and mandates removal of government identification from non-accepted supplies. Covered Defense Information provisions may apply, and packaging must adhere to DLA packaging requirements. The solicitation, issued under SPE7L3-26-T-137P, has a response deadline of August 10, 2026, and is managed by the Department of Defense’s Land Supplier Operations Vehicle Support, with Susan Diamond as the primary point of contact.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
DIBBS
SEAL, NONMETALLIC RO
Solicitation # SPE7L3-26-T-137S
The contract is for the procurement of 168 nonmetallic seals with NSN 5330-01-362-3392, solicited under SPE7L3-26-T-137S by the Department of Defense through the Land Supplier Operations Vehicle Support agency. The seals must comply with DLA packaging requirements and incorporate technical and quality standards referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date for simplified acquisitions. The item is strictly prohibited from containing asbestos as defined in Fed-Std-313, and all non-accepted supplies must have government identification removed prior to return. Performance is required at New Cumberland, PA, 17070-5002, with delivery due 119 days after order award. The solicitation was posted on July 29, 2026, and responses are due by August 10, 2026, with Stephen Weaver listed as the primary point of contact. The NAICS code 339991 identifies this as an other miscellaneous manufacturing activity, and the procurement is open to federal contractors without set-aside designation.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 339991
New
International
WATERTIGHT CONNECTOR & H AND C CRIMPS (M9-7)
Solicitation # 1017555
Saskatchewan Power Corporation is seeking bids for the purchase and delivery of watertight connectors and H and C crimps under solicitation number 1017555, titled WATERTIGHT CONNECTOR & H AND C CRIMPS M9-7. The tender was posted on MERX on July 28, 2026, with a response deadline of August 18, 2026, at 2:00 PM Central Time. All bid submissions must comply with the requirements outlined in the Invitation to Tender document, which is accessible through MERX. Any amendments, clarifications, or addenda will be posted exclusively on MERX, and in the event of inconsistencies between documents, the PDF version of the Invitation to Tender shall govern. A downloadable Word version is available for reference, though it is not binding. The goods are to be delivered to locations within Saskatchewan, and primary point of contact for inquiries is Mayur Parmar, reachable at 306-566-2769. Bidders are advised to review all documentation carefully and monitor MERX for updates prior to submission.
Saskatchewan Power Corporation

POSTED

1 day ago

DEADLINE

in 19 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 541512
New
DIBBS
Cybersecurity Compliance and CUI SafeguardingThe contract requires the implementation and ongoing maintenance of NIST SP 800-171 Revision 2 controls to safeguard Controlled Unclassified Information within the contractor’s systems and environments. This includes establishing technical, administrative, and physical safeguards to ensure the confidentiality, integrity, and availability of CUI in alignment with federal cybersecurity standards. The contractor must also comply with incident reporting requirements mandated by DFARS 252.204-7012, ensuring timely notification and remediation of any cybersecurity events affecting CUI. All activities must be performed under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the SBA, and the work is classified under NAICS code 541512 for Computer Systems Design Services. The contract is structured as a subcontract and is associated with the Department of Defense’s Land Supply Chain organization. Responses must be submitted by the deadline of August 28, 2026, with the expectation that performance will occur within the defense supply chain environment.
Computer Systems Design Services

POSTED

about 16 hours ago

DEADLINE

in 29 days
View Details
NAICS: 541380
New
DIBBS
Quality Inspection and Testing ServicesThe contract requires independent inspection and testing of heater assemblies and components to ensure full compliance with specified technical drawings, MIL-STD-1916 standards, and a zero non-conformance mandate. All work must be performed with rigorous attention to quality control, ensuring that every part meets exacting military specifications without deviation. The services are critical to maintaining the integrity and reliability of defense-related heating systems. This is a total small business set-aside subcontract under NAICS code 541380, exclusively available to small business concerns as defined by the SBA. The solicitation was posted on July 29, 2026, with a response deadline of August 28, 2026. The contracting activity stems from the Department of Defense through the Land Supply Chain office, and performance is expected to support U.S. military operations. All proposals must demonstrate proven capability to deliver defect-free inspection and testing outcomes in alignment with stringent defense quality requirements.
Testing Laboratories and Services

POSTED

about 16 hours ago

DEADLINE

in 29 days
View Details
NAICS: 561910
New
DIBBS
Packaging, Preservation, and Corrosion ControlThe contract requires comprehensive military-compliant packaging, corrosion prevention, and moisture control measures for a heater parts kit, ensuring all components are protected during storage and transit under demanding operational conditions. All packaging must meet strict defense standards with proper labeling and full documentation to guarantee traceability, readiness, and compliance with military logistics protocols. The scope encompasses every step from initial preservation techniques to final packaging and recordkeeping, with an emphasis on long-term durability and environmental resilience. This is a total small business set-aside subcontract under NAICS code 561910, issued by the Department of Defense’s Land Supply Chain, and is open for response until August 28, 2026. The solicitation is exclusively available to small businesses as defined by the Small Business Administration, and the place of performance and exact delivery location are not specified in the provided details. All work must align with federal acquisition regulations and military-grade specifications, with no flexibility in adherence to preservation and packaging standards.
Packaging and Labeling Services

POSTED

about 16 hours ago

DEADLINE

in 29 days
View Details
NAICS: 335999
New
DIBBS
Component Supply for Heater AssemblyThe contract seeks the supply of critical components including heating elements, thermostats, housings, and electrical connectors specifically designed to meet military specifications and stringent quality standards for integration into heater assemblies. All materials must adhere to defined technical requirements and undergo rigorous testing to ensure reliability under demanding operational conditions. The procurement is structured as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the Small Business Administration, with the NAICS code 335999 designating it under Other Electrical Equipment and Component Manufacturing. The solicitation was posted on July 29, 2026, and responses are due by August 28, 2026, with performance expected to support the Department of Defense’s Land Supply Chain through undisclosed but mission-critical locations. Compliance with federal acquisition regulations and defense-specific quality protocols is mandatory, and all suppliers must be certified to handle sensitive military-grade components under controlled manufacturing practices.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 29 days
View Details
NAICS: 333414
New
DIBBS
Manufacture of Vehicular Compartment Heater Parts KitThe contract requires full manufacturing, assembly, testing, and packaging of the vehicular compartment heater parts kit designated by NSN 2540-01-096-5023, strictly in accordance with military specifications and source control drawings. All work must be performed to meet rigorous defense standards, ensuring the component’s reliability and performance under operational conditions. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond, reinforcing the Department of Defense’s commitment to supporting small business participation in defense supply chains. The project falls under NAICS code 333414, which classifies it within the heating equipment manufacturing sector, and is managed by the Land Supply Chain division of the Department of Defense. The opportunity was posted on July 29, 2026, with a response deadline of August 28, 2026, providing potential bidders a four-week window to prepare and submit proposals. The place of performance and point of contact details are not specified, but the primary location of work is expected to align with the contractor’s facility capable of meeting military-grade production requirements. All submissions must be made through the official DIBBS platform, and compliance with all technical, quality, and regulatory standards is mandatory for award consideration.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 29 days
View Details
NAICS: 333999
New
DIBBS
Small Business Subcontracting Participation (Socioeconomic Support)Small businesses are invited to participate in subcontracting opportunities to support a prime contractor’s socioeconomic evaluation score under a Department of Defense solicitation tied to NAICS code 333999. This subcontracting initiative is designed to enhance the prime contractor’s standing in federal socioeconomic assessments by integrating qualified small businesses into the supply chain, though no specific set-aside designation is applied. The opportunity was posted on July 29, 2026, with responses required by August 27, 2026, and is managed by the Land Supply Chain organization under the Office of the Secretary of Defense. While no place of performance or point of contact details are specified, interested small businesses must engage directly through the provided DIBBS portal to pursue participation and align with the prime contractor’s subcontracting goals. The effort does not involve a formal contract award but rather enables small firms to contribute to a larger bid’s compliance and competitiveness through verified subcontracting commitments.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 28 days
View Details
NAICS: 484220
New
DIBBS
Logistics and Domestic Freight Shipping (FOB Origin)The contract pertains to the arrangement and execution of domestic freight shipping services from various points of origin within the United States to DLA Distribution New Cumberland, Pennsylvania, under FOB origin terms, meaning the responsibility for the shipment transfers to the buyer upon delivery to the carrier at the origin. This is a subcontract solicitation under the NAICS code 484220, which categorizes it within the truck transportation sector, specifically for general freight and local hauling. The opportunity is posted by the Department of Defense through its Land Supply Chain office, indicating that the work supports military logistics and supply chain operations. The response deadline is set for August 27, 2026, and the solicitation is available via a public portal for interested parties to review and submit proposals. There is no specific set-aside designation listed, suggesting the contract is open to all qualified contractors, regardless of business size or certification status. Performance is required solely within the U.S., with the final destination fixed at New Cumberland, PA, and no additional point of contact details are provided in the posting.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 16 hours ago

DEADLINE

in 28 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Preservation, and Marking ServicesThe contract requires the provision of packaging, preservation, and marking services for cylinder assemblies in full compliance with DLA RP001, MIL-STD-2073-1E, and MIL-STD-129 standards, ensuring all components meet rigorous military specification for handling, storage, and transportation. All work must adhere strictly to these technical guidelines to guarantee the integrity and traceability of the assemblies throughout the supply chain, with particular attention to labeling, protective materials, environmental preservation, and unit identification. This is a subcontract opportunity issued by the Department of Defense under the LAND SUPPLY CHAIN organization, with a solicitation posted on July 29, 2026, and a mandatory response deadline of August 27, 2026. The North American Industry Classification System code 493190 indicates the focus on warehousing and storage services, though the specific scope centers on specialized military packaging activities. The place of performance and point of contact details are unspecified, but the contract is accessible via the DIBBS platform for interested parties to review full requirements and submit proposals.
Other Warehousing and Storage

POSTED

about 16 hours ago

DEADLINE

in 28 days
View Details
NAICS: 333999
New
DIBBS
Supply of Cylinder Assembly, Actuating, Linear (NSN 3040-01-642-5340)The contract seeks the procurement and delivery of 154 new, unused Cylinder Assembly, Actuating, Linear units identified by NSN 3040-01-642-5340, with the potential to expand to a maximum of 308 units if required. All units must fully comply with military specifications and meet stringent packaging standards to ensure readiness for deployment. The solicitation is issued under the NAICS code 333999 and is structured as a subcontract within the Department of Defense’s Land Supply Chain. Responses are due by August 27, 2026, with the opportunity formally posted on July 29, 2026. The place of performance and specific delivery location are not detailed in the available data, and no set-aside provisions or small business preferences are indicated. The contract is administered by the Department of Defense through its DLA DIBBS portal, with no direct point of contact listed for inquiries.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 28 days
View Details
NAICS: 332510
New
DIBBS
BAND, RETAINING
Solicitation # SPE7L1-26-T-890M
The contract pertains to the procurement of 300 retaining bands with NSN 5340-01-070-4996 under solicitation SPE7L1-26-T-890M, a total small business set-aside with a NAICS code of 332510, administered by the Department of Defense through the Land Supply Chain office. Delivery is due within 266 days after award, and performance is required at Robins AFB, Georgia. The contractor must prepare a Production Lot Test Report, clearly labeled with the contract and lot numbers, and present it to the Quality Assurance Representative for review. All shipments of these reports must include signed DD Form 1222 and DD Form 250/iRAPT receiving documents, a copy of the contract, all applicable test reports with actual results and tolerances, material and process certifications, process operations and inspection method sheets, and manufacturing drawings marked to limit public disclosure and restrict government use as necessary. The solicitation was posted July 29, 2026, with responses due by August 10, 2026, and primary point of contact is Isabelle Szulewski at DLA.
Hardware Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
FILTER ELEMENT, FLUI
Solicitation # SPE7L1-26-T-888V
The contract specifies the procurement of a fluid filter element with part number 7608089 and NSN 2910-01-699-0390, requiring a quantity of 12 units to be delivered within 20 days FOB destination. All items must comply with the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition type. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by specifications. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, including specific preservation methods, container types, and marking codes, with no special marking required. Palletization follows DLA packaging guidelines, and deliveries must be addressed to the specified FPO location. The contract enforces a zero variance on quantity and requires inspection and acceptance at the destination. Transportation and shipping instructions reference specific DLA procedural notes, and the vendor must use the provided vendor system identifier for processing. The required delivery date is July 27, 2026, with the solicitation issued under contract number SPE7L1-26-T-888V, classified under NAICS code 336310, and managed by the Department of Defense’s Land Supply Chain.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
RETAINER, NUT AND BOLT
Solicitation # SPE7L1-26-T-890A
This contract pertains to the procurement of 22 units of a retainer, nut, and bolt assembly identified by NSN 5340-01-684-8348 under solicitation SPE7L1-26-T-890A. Delivery is required within 73 days of contract award, with shipment FOB origin and inspection and acceptance occurring at the destination warehouse in Tracy, California. Strict packaging standards under MIL-STD-2073-1E and marking requirements per MIL-STD-129 must be followed, with no special marking codes applied. The item must be packed in compliance with DLA’s packaging guidelines, using a Unit of Issue of EA, with zero tolerance for quantity variance. Environmental restrictions prohibit the use of Class I ozone-depleting chemicals and the intentional incorporation of mercury or mercury-containing compounds, except for specific functional applications like batteries, fluorescent lights, or specialized instrument components as defined by NAVSEA. Mercury-containing portable devices must include shockproof design and a secondary containment boundary per NAVSEA 5100-003D. All supplies must comply with documentation, reporting, and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. The contract is bound by federal acquisition rules, and all communications and logistics must conform to DLA procedures, including transportation directives C19 and C20. The point of contact for inquiries is Brandon Pesicek, and the required delivery date is November 20, 2025, with a need ship date of November 4, 2025.
Hardware Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 11 days
View Details