Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

GASKET

Active
SPE4A5-26-T-331KFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a gasket identified by NSN 5330-99-747-4544, with a total quantity of 210 units, under solicitation SPE4A5-26-T-331K. The item must be packaged and sealed in a medium duty, waterproof, greaseproof, and opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, due to the sensitivity of the Federal Supply Classifications 5330/5331 to ultraviolet radiation. This packaging requirement applies to direct vendor delivery, foreign military sales, and stock shipments. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with a zero-defect acceptance criterion unless otherwise stated, and critical, major, and minor attributes must be verified at levels VII, IV, and II or corresponding AQLs of 0.1, 1.0, and 4.0, respectively. Unspecified attributes are deemed major. The solicitation was posted on August 5, 2026, with responses due by August 13, 2026, and delivery is required within 121 days after contract award. The contract is managed by the Department of Defense’s ASC Supplier Oper OEM Division, with performance occurring in New Cumberland, Pennsylvania, and primary point of contact being Brandy Coward. All technical and quality requirements referenced are governed by the DLA Master List, with applicable revisions determined by the solicitation or award date depending on acquisition size.

General Info

Procure 210 gaskets, NSN 5330-99-747-4544, with MIL-DTL-117 packaging, zero-defect inspection, delivery in 121 days.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

339991 - Gasket, Packing, and Sealing Device ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A5-26-T-331K Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
Brandy Coward
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
GASKET
GASKET
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
FEDERAL SUPPLY CLASSIFICATIONS 5330/5331 CONTAIN NATIONAL STOCK NUMBERS
(NSN's) AND LOCAL STOCK NUMBERS (LSN's) THAT MAY DETERIORATE WHEN EXPOSED TO ULTRAVIOLET (UV) RAYS. THE CONTRACTUAL END ITEM SHALL BE PACKAGED AND SEALED IN A MEDIUM DUTY, WATERPROOF, GREASEPROOF, OPAQUE BAG IN ACCORDANCE WITH MIL-DTL-117, TYPE II, CLASS C, STYLE 1.
THIS REQUIREMENT APPLIES TO DIRECT VENDOR DELIVERY (DVD), FOREIGN MILITARY SALES (FMS) AND STOCK SHIPMENTS.
SPECIAL NSN/Part Number: 5330-99-747-4544 Quantity: 210 EA Purchase Request: 7017741246QTY: 210 Delivery: 121 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L4-26-U-1055
The contract solicitation SPE7L4-26-U-1055 seeks 31 gaskets identified by NSN 5330-01-701-0239 under a Total Small Business Set-Aside, with a maximum contract value of $350,000 and a delivery deadline of 97 days after order placement. The item is classified as a commercial item and must be free of asbestos, with packaging strictly compliant with MIL-DTL-117, Type II, Class C, Style 1, using a medium-duty, waterproof, greaseproof, opaque bag for all Direct Vendor Delivery, Foreign Military Sales, and stock shipments, particularly due to UV sensitivity of FSC 5330/5331 components. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, including special marking code 32 for shelf-life items, and all units must be uniquely identified per MIL-STD-130N with UHF RFID or 2D Data Matrix barcoding. The contract includes strict compliance with safeguarding covered defense information under 252.204-7012 and NIST SP 800-171 requirements, with mandatory cyber incident reporting, and prohibits procurement of covered defense telecommunications equipment from restricted entities. Invoicing is required through WAWF, with payment subject to accelerated payments to small business subcontractors, and inspection and acceptance occur at the destination by the Government under the fixed-price inspection clause. The solicitation mandates full representation of small business status and UEI/CAGE codes, with additional disclosures required for hazardous materials under 29 CFR 1910.1200 and for any covered defense telecommunications products. All deliveries are restricted to the continental United States under FOB Origin terms, and offers are evaluated on price and other factors, not solely on lowest cost. Deviations from standard FAR clauses apply throughout, particularly under Deviation 2026-00038, affecting clauses related to contract type, payment, subcontracting, and cybersecurity, with additional compliance required for whistleblower rights, restrictions on forced arbitration, and prohibitions on hexavalent chromium and toxic materials.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 6 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
GASKET
Solicitation # SPE7L1-26-T-916W
The contract is for the procurement of 600 linear feet of gasket material identified by NSN 5330-01-557-0920 and part numbers X-113BT and TRIMLIK-X-113BT, with a 10% allowable increase in quantity for a maximum delivery of 660 feet. The unit of issue is the foot and the contract总价 is $600 based on an implied unit price of $1.00 per foot. Delivery is required within five days after award to the specified location in Albany, GA, under FOB Origin terms, with inspection and acceptance occurring at the destination. Packaging must strictly comply with MIL-STD-2073-1E and DLA’s RP001 packaging requirements, including cold/dry preservation methods, and all items must be marked per MIL-STD-129 with no special marking required. The item is not classified as hazardous, but compliance with hazardous material protocols under IP025 and OSHA’s Hazard Communication Standard (29 CFR 1910.1200) is mandatory if applicable, along with submission of Safety Data Sheets prior to award. Radioactive material thresholds are defined, and notification is required if any component exceeds specified activity levels. The contractor must use WAWF for invoicing and must have a valid UEI and CAGE code, while also certifying compliance with regulations regarding covered defense telecommunications equipment and subcontractor disclosures. The award mechanism is likely Low Price Technically Acceptable, with proposals submitted electronically through DIBBS before the August 17, 2026 deadline. Special clauses cover whistleblower rights, former DoD official compensation restrictions, third-party data limitations, and government work product control, indicating a high level of regulatory oversight. The contract does not specify a contract type but involves a single CLIN with no options or indefinite-delivery elements, and no key personnel or security clearance requirements are identified.
LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN
Solicitation # SPE7LX-26-U-9284
The contract is for 2,029 plain seals with the NSN 5330-01-504-8614 under solicitation SPE7LX-26-U-9284, issued by the Department of Defense’s Strategic Acquisition Program Directorate. The solicitation is a total small business set-aside, meaning only qualifying small businesses may respond, and it is governed by the NAICS code 339991. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for this simplified acquisition. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. Source approval documentation must be submitted in accordance with the specified documentation requirements. Delivery is required within 54 days after award, and all responses must be submitted by August 20, 2026. The primary point of contact is Theodore Misiolek, reachable via phone or email, and additional details are available through the DIBBS portal.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 6 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
SEAL, OIL, HORIZONTAL
Solicitation # SPE7LX-26-U-9310
The contract is for 538 units of a horizontal oil seal with NSN 5330-01-662-9969, solicited under number SPE7LX-26-U-9310 with a response deadline of August 20, 2026, and a required delivery within 98 days of award. This is a total small business set-aside under FAR 19.5, targeting NAICS code 339991 for other miscellaneous manufacturing, and is issued by the Department of Defense’s Strategic Procurement Program Directorate. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless superseded by an amendment. Packaging must comply with DLA procurement standards, and non-accepted supplies must have all government identification removed prior to return. All data provided is proprietary or insufficient for competitive bidding, indicating the requirement is based on proprietary specifications. The primary point of contact is Theodore Misiolek, reachable via email and phone provided.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 6 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE4A6-26-T-12TW
This contract solicits 262 O-RINGS with NSN 5331-00-004-5061 under solicitation number SPE4A6-26-T-12TW, with a response deadline of August 13, 2026, and a delivery requirement of 161 days after award. The item must comply with all technical and quality requirements referenced by R and I numbers from the DLA Master List of Technical and Quality Requirements, with the version in effect on the solicitation issue date controlling for simplified acquisitions. Packaging must adhere to DLA standards, and all supplies must be stripped of government identification if not accepted. Contractors are required to retain supply chain traceability documentation per DLA Directive Procurement Note C03 from August 2016. Documentation for source approval requests is mandatory, and the product must be free of asbestos, with any alternative materials requiring prior approval under Clause L30 and Provision 4 conditions. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be submitted for approval unless explicitly authorized by specification requirements. Covered defense information may apply, and the contract is administered by the ASC Commodities Division under the Department of Defense, with performance to occur in Tracy, California, and primary point of contact being Stuart Dowdy at stuart.dowdy@dla.mil.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7LX-26-U-9309
The contract solicitation SPE7LX-26-U-9309 is for the procurement of O-RINGS with NSN 5331-01-269-4323, under a Total Small Business Set-Aside, with an estimated quantity of 1,746 units and a maximum contract value of $350,000. The procurement is structured as an Indefinite Delivery Contract with deliveries required FOB Origin and an 84-day lead time after order placement. All units must comply with stringent military packaging standards including MIL-DTL-117 Type II, Class C, Style 1 for waterproof and greaseproof bagging, and MIL-STD-2073-1E for preservation and marking, with a shelf life of 180 months under controlled dry conditions and no extendability. Labeling must adhere to MIL-STD-129, including mandatory Data Matrix barcodes and special marking code 32 for shelf-life tracking, while prohibiting asbestos as defined by FED-STD-313 and hexavalent chromium, and requiring full compliance with OSHA’s Hazard Communication Standard for any hazardous materials. The solicitation mandates electronic submission through DIBBS by August 20, 2026, and all payments must be processed via Wide Area WorkFlow with standardized electronic invoicing formats. Technical and quality requirements are sourced from the DLA Master List of Technical and Quality Requirements, referenced through R and I numbers, and contractors must affirm small business status and provide UEI and CAGE codes as required for socioeconomic representation. The contract includes a comprehensive suite of FAR and DFARS clauses governing equal opportunity, trafficking in persons, employment verification, cybersecurity safeguards such as NIST SP 800-171 and safeguarding covered defense information, export controls, environmental protections, subcontracting for commercial items, inspection at destination by the government, accelerated payments to small business subcontractors, and prohibitions on procurement from communist Chinese military companies or covered defense telecommunications equipment. Payment and administrative details are not fully specified in the solicitation and will be finalized upon award, but a primary point of contact is Theodore Misiolek at the Strategic Acq Program Directorate. The contract does not specify evaluation factors, options, key personnel requirements, or security clearances, and no formal attachments are listed beyond operational references to standards.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 6 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
COVER, EXHAUST LINE
Solicitation # SPE8EF-26-Q-0167
The contract pertains to the procurement of four units of a cover for an exhaust line, identified by NSN 1730-00-691-5565, under solicitation SPE8EF-26-Q-0167. The requirement is priced on a firm fixed price basis with no tolerance for quantity variance, meaning exactly four units must be delivered. The item must be delivered within 60 days after the award date, with both inspection and acceptance occurring at the origin. Delivery is FOB destination, and the shipping address is located at Al Udeid Air Base in Qatar, with a final parcel post address in APO AE 09309-9998. Packaging must strictly comply with MIL-STD-2073-1E and DLA packaging requirements, including specific preservation methods, wrapping materials, and unit container type D3, while marking must adhere to MIL-STD-129 with no special markings required. Palletization must also follow DLA’s procurement guidelines. The contract incorporates cybersecurity requirements via CMMC Level 2 Self-Assessment and defines covered defense information, with quality and technical standards sourced from the DLA Master List. The purchaser is a federal agency under the Department of Defense, with Sharon Forde listed as the primary point of contact. The material need date is May 16, 2023, and the contract includes internal government codes for tracking and logistics coordination.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7LX-26-U-9325
The contract concerns the procurement of 5,156 O-rings with NSN 5331-01-537-0498 under solicitation SPE7LX-26-U-9325, issued by the Department of Defense’s Strategic Acq Program Directorate. Delivery is required within 128 days of award, and the purchase request number is 1000239164. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The solicitation was posted on August 5, 2026, with responses due by August 20, 2026, and is classified under NAICS code 339991 for other miscellaneous manufacturing. The primary point of contact is Theodore Misiolek, reachable at the provided phone and email. Government identification must be removed from non-accepted supplies, and performance is subject to federal procurement regulations without a specified set-aside. The full solicitation details are accessible via the DIBBS system.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 6 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
FELT, MECHANICAL, PRE
Solicitation # SPE7L1-26-T-917K
This contract pertains to the procurement of FELT, MECHANICAL, PREFORMED items identified by the NSN 5330-00-496-0967 and specific part numbers from qualified suppliers including LINEAR MOTION LLC, ONTIC ENGINEERING & MANUFACTURING, INC, and MISTEQUAY GROUP LTD. The item is classified as a commercial item and must comply with strict packaging requirements mandated by MIL-DTL-117, TYPE II, CLASS C, STYLE 1, ensuring protection in a medium duty, waterproof, greaseproof, and opaque bag to prevent UV degradation, applicable to all delivery types including direct vendor delivery, foreign military sales, and stock shipments. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must follow DLA’s packaging guidelines. The contract specifies a delivery of 57 units at a unit price of $57.00, totaling $3,249.00, with FOB origin terms, zero quantity variance allowed, and inspection and acceptance occurring at destination. The required delivery date is 55 days from award, with a need ship date of November 4, 2025, and an original required delivery date of October 21, 2025. All materials must be free of asbestos as defined by FED-STD-313, and transportation logistics are governed by DLA procedural notes C19 and C20. The contract reference is SPE7L1-26-T-917K, solicited under a federal acquisition framework, with the point of contact being Kallie Regula of the Department of Defense’s Land Supply Chain.
LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7M1-26-Q-1336
This contract specifies the procurement of 2,000 O-rings made from synthetic rubber, identified by the National Stock Number 5331-00-248-3849 and part number MS29513-019, with detailed technical requirements aligned to SAE AS29513 Revision C dated October 1, 2016. The item is classified as a commercial item and must be manufactured by a supplier approved on the Qualified Products List (QPL); only QPL-approved manufacturers are eligible at the time of award. The product has a non-extendable shelf life of 180 months and is designated as a Type I (Code Y) item, with packaging and preservation strictly governed by MIL-STD-2073-1E and MIL-STD-129. Mercury and mercury-containing compounds are prohibited from direct contact with the item or its packaging, with exceptions only for functional uses in batteries, lighting, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents, and any such components must meet additional containment standards. Packaging must be in a medium-duty, waterproof, greaseproof, and opaque bag per MIL-DTL-117, Type II, Class C, Style 1, especially for direct vendor delivery, foreign military sales, or stock shipments. Preservation methods require dry, clean packaging with no mercury-based compounds, and markings must comply with MIL-STD-129, including the special marking code for Type I shelf life. The delivery is FOB origin with a firm fixed price and zero variance allowed in quantity, to be delivered within 126 days after contract award, with inspection and acceptance occurring at the destination. The contract is subject to all technical and quality requirements referenced in the DLA Master List, and the sole point of performance and delivery is Tinker AFB, Oklahoma.
MARITIME SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
SHIELDING GASKET, ELECTRONIC
Solicitation # SPE7MX-26-R-X039
The contract centers on the procurement of a shielding gasket, electronic, identified by NSN 5999-01-506-4338 and part number AVIATION DEVICES AND ELECTRONIC P/N AG736000-01, under solicitation SPE7MX-26-R-X039 issued by the Land Supplier Operations SMSG under the Department of Defense. It is an indefinite-delivery contract with a guaranteed minimum value of $2,004 and a maximum obligated amount of $1,491,112, allowing orders to be placed over a three-year period from the award date. The contract uses a firm-fixed price structure with pricing structured in four quantity ranges, from 161 to 3,852 units, based on estimated annual demand of 2,569 units. Deliveries are FOB origin, with final inspection and acceptance occurring at the destination, and all items must comply strictly with MIL-STD-2073-1E for packaging and preservation, including a dry clean preservation method, U packaging code, and BE unit container. Marking and labeling must adhere to MIL-STD-129 with Data Matrix or Code 128 barcoding, and bare part identification is governed by MIL-STD-130 via RQ017, requiring NSN, part number, and traceable lot or serial codes. Special labeling is required for test samples: “Product Verification Test Samples – Do Not Post to Stock,” along with contract and lot numbers. The contractor must supply full traceability documentation per DFARS 252.217-7026 and comply with Buy American and specialty metals requirements under 10 U.S.C. 4753, as well as DFARS restrictions on hexavalent chromium and foreign sourcing. Cybersecurity compliance with NIST SP 800-171 is mandatory for handling controlled unclassified information. All invoicing must be submitted via EDI, and the contractor must hold a valid UEI and CAGE code, with socioeconomic status certifications required for small business and other designated categories. Evaluation will be based on a balanced trade-off approach where price is paramount but not sole; past performance, proposed delivery, and surge and sustainment capabilities will be assessed, with award made to the offeror providing best value. The contracting officer retains full authority to inspect and accept goods, subject to material certification
LAND SUPPLIER OPERATIONS SMSG

POSTED

about 6 hours ago

DEADLINE

in 30 days
View Details
NAICS: 339991
New
DIBBS
RETAINER, PACKING
Solicitation # SPE7L1-26-T-916M
The contract solicitation is for the procurement of two retainers, packing, identified by NSN 5330-00-568-5838, under purchase request 7017756175, with a required delivery within 20 days after award. This solicitation, numbered SPE7L1-26-T-916M, was posted on August 5, 2026, and responses are due by August 17, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements accessible via the DLA website, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Packaging must comply with DLA packaging standards, and non-accepted supplies must have all government identification removed prior to return. The solicitation is classified under NAICS code 339991, issued by the Department of Defense’s Land Supply Chain, and is open to federal contractors. Primary point of contact is Kristina Derry, reachable via email and phone provided in the contract data.
LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 336413
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A5-26-T-331N
The contract is for a single-leg wire rope assembly with part number 0001S00000052 and a quantity of eight units, issued under solicitation SPE4A5-26-T-331N with a delivery deadline of 509 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have government identification removed. Items must be physically marked per RQ017, and component qualification is required under QPL/QML lists referenced in procurement note H02. Inspection and acceptance occur at the manufacturer’s origin unless otherwise directed. Sampling follows MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned specific verification levels or AQLs; unspecified attributes are treated as major. Zero non-conformances are required for acceptance unless stated otherwise. The item is subject to export controls under ITAR or EAR, with technical data restricted to contractors holding approved JCP certification, having completed required DOD export control training, and received DLA authorization. DFARS 252.225-7048 governs the handling of this controlled data, extending restrictions to all foreign nationals regardless of location. Cybersecurity requirements mandate CMMC Level 2 certification by a C3PAO. Covered defense information is subject to RD002, and the contractor must comply with tailored higher-level quality requirements. Item Unique Identification is not required per customer request, with DFARS 252.211-7003(c)(1)(i) applying. The contract is managed by the Department of Defense’s ASC Supplier Oper OEM Division with performance in New Cumberland, PA, and primary point of contact is Hien-Van Trinh.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336320
New
DIBBS
LIGHT ASSEMBLY, INDI
Solicitation # SPE4A5-26-T-330Y
This contract involves the supply of a commercial item identified as LIGHT ASSEMBLY, INDI, with part number 2275804-3 and NSN 6220013306650, for a single unit under solicitation SPE4A5-26-T-330Y. The item must be delivered within 20 days of contract award, FOB origin, with zero variance allowed in quantity and inspection and acceptance occurring at the origin. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using specified methods for preservation, wrapping, cushioning, and marking, with plastics avoided where possible. Palletization follows DLA packaging requirements, and no special marking is required. Technical and quality standards referenced by R or I numbers are governed by the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise specified, with attribute levels defined for critical, major, and minor characteristics. Item Unique Identification is not required per the Service customer’s request. The item is destined for the Taiwan Army at Kaohsiung, with shipment coordinated through designated freight protocols and referencing specific DLA procedural notes. The original required delivery date is August 7, 2026, and the contract was posted on August 5, 2026, with responses due by August 13, 2026.
Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
CLAMP, BLOCK
Solicitation # SPE4A5-26-T-331D
The contract pertains to the procurement of 101 units of CLAMP, BLOCK with NSN 1560016946944 and part number 842-349845-14, intended for a critical application under The Boeing Company. Delivery is required within 170 days from the contract date, with FOB origin terms and inspection and acceptance occurring at the destination. The item must comply with stringent packaging and marking standards including MIL-STD-2073-1E and MIL-STD-129, with no special marking required. Packaging must adhere to DLA’s procurement standards, and palletization follows RP001 guidelines. The part is subject to FAA bare item marking requirements and airworthiness approval under RQ019, necessitating a Certificate of Airworthiness and Conformance. Supply chain traceability documentation must be retained per DLA Directive Procurement Notes C03, and configuration change management is governed by RQ002. Sampling and quality verification must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attribute levels are predefined as VII, IV, and II for critical, major, and minor characteristics respectively. The acquisition falls under simplified procedures, with technical and quality requirements referenced from the DLA Master List, and no unit of issue translation is needed as the DoD unit is used. All applicable CDRLs and technical data packages are to be reviewed, with the delivery address specified as the DLA Distribution facility in New Cumberland, PA. The contract solicitation was posted on August 5, 2026, with a response deadline of August 13, 2026, and the original required delivery date is September 3, 2027.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, AIRF
Solicitation # SPE4A5-26-T-331L
This solicitation, SPE4A5-26-T-331L, seeks nine roller bearings designated as BEARING, ROLLER, AIRF with part number 3110016623661, under a simplified acquisition valued at $9.000. The item is classified as a critical application and requires compliance with strict domestic sourcing restrictions per DFARS 252.225-7016, mandating that each bearing be manufactured in the United States, its outlying areas, or Canada, with over 50% of the total cost of its components—rolling elements, retainer, inner race, or outer race—originating from these locations. Contractors must submit a completed Contractor’s Declaration on the domestic/foreign nature of materials, obtainable from the DLA Foreign Bearing Waiver website, and failure to provide this documentation will disqualify the quote. If no compliant offers are received, the solicitation may be canceled or held pending a waiver request approved under DFARS 225.7009-4. The bearings must meet detailed technical and quality standards referenced by R/I numbers from the DLA Master List, and include supply chain traceability documentation per DLAD Procurement Note C03. The item is subject to FAA airworthiness certification requirements, though Unique Item Identification is waived per DFARS 252.211-7003(c)(1)(i). Packaging must strictly adhere to MIL-STD-2073-1E and MIL-DTL-197M, with preservation methods determined by bearing type and closure, using contractor-selected methods coded as ZZ, and labeling must follow MIL-STD-129 with special marking designated as ZZ-ZZ. Sampling inspections will occur at destination using zero-defect criteria under MIL-STD-1916, ASQ H1331 Table 1, or comparable plans, with critical, major, and minor attributes assigned AQLs of 0.1, 1.0, and 4.0 respectively. All deliveries must be FOB destination to the DLA Distribution DDSP New Cumberland facility in Pennsylvania within 154 days of order receipt, with no variance allowed in quantity. The contract includes mandatory FAR and DFARS clauses covering equal opportunity, human trafficking prevention, employment eligibility verification, sustainable products, hazardous materials identification, cybersecurity assessment per NIST SP 800-17
Ball and Roller Bearing Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE4A5-26-T-331S
This contract pertains to the procurement of a window panel for aircraft, specifically identified by part number 205-030-285-002 and 205-030-285-2, with a total quantity of 51 units to be delivered within 127 days under contract SPE4A5-26-T-331S. The item is designated as a critical application component, and delivery is FOB origin with inspection and acceptance occurring at the destination. Strict packaging requirements mandate compliance with MIL-STD-129 and either FED-STD-313 for hazardous materials or ASTM D3951 for non-hazardous items, with all DLA Master List of Technical and Quality Requirements taking precedence. Item Unique Identification is not required per the service customer’s request, and physical marking must follow RQ017 guidelines. Quality assurance requires adherence to ISO 9001:2015 for manufacturers and non-manufacturers, and sampling must follow MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise specified. Cybersecurity compliance includes a CMMC Level 2 self-assessment, and the contractor must handle covered defense information in accordance with RD002. A first article test is mandated as a separate line item, with one unit required for testing; pricing for this line item must be included in the offer, though no award will be made if the test is waived. The delivery address is DLA Distribution Cherry Point in North Carolina, and transportation must comply with DLAD procedural notes C19 and C20. The contract enforces a zero variance in quantity, and all packaging must be palletized per DLA packaging requirements.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
MODULE ASSEMBLY, FRE
Solicitation # SPE4A5-26-T-331C
This contract pertains to the procurement of one unit of a Module Assembly, Frequency, with NSN 6110-00-885-2327 and part number 690416, supplied by Hamilton Sundstrand Corporation under contract SPE4A5-26-T-331C. Delivery is required within 170 days from the award date, with shipment originating FOB origin and inspection and acceptance occurring at the destination. The item is not subject to Item Unique Identification per government request, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, which supersede any conflicting standards. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization in accordance with DLA Packaging Requirements, and all markings and labeling must adhere strictly to applicable military standards. Sampling and quality verification must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The contractor must comply with Cybersecurity Maturity Model Certification Level 2 self-assessment requirements and manage configuration changes through Engineering Change Proposals or formal variance requests. Removal of government identification from non-accepted supplies is required, and measuring and test equipment must meet specified standards. The delivery address is DLA Distribution Depot Hill in Hill AFB, Utah, with a final ship date of January 31, 2027 and an original required delivery date of May 21, 2028. The unit of issue is each (EA), with no quantity variance permitted, and all documentation and compliance responsibilities are binding under the terms outlined in the solicitation.
Other Measuring and Controlling Device Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
AXLE ASSEMBLY
Solicitation # SPE4A5-26-R-0264
The procurement is for 51 axle assemblies, NSN 1615-01-502-6255, part number 96250-32107-041, intended for use in the H-60 Seahawk helicopter, with a firm-fixed price contract structure and delivery required within 260 days from award to New Cumberland, PA. Only approved sources—Sikorsky Aircraft Corporation and Delta-Ray Industries Inc.—are currently authorized to supply this item, and any other manufacturer must submit a full source approval package to be considered. Technical data, specifications, or drawings are not available from the Government, and requests for such information will not be accepted. FOB Origin inspection and acceptance apply, and the item is classified as a Critical Safety Item, subject to the Supplier Performance Risk System. The acquisition is unrestricted, and all responsible sources may submit offers evaluated based on price, past performance, and other criteria outlined in the solicitation. The solicitation will be accessible via the DIBBS system and upon direct request to the buyer, with an anticipated posting date of August 5, 2026, and a response deadline of August 4, 2026. The contract is managed by DLA Aviation under the Department of Defense, with primary point of contact Samuel Kogi at the Richmond, VA office.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 30 days
View Details
NAICS: 336413
New
DIBBS
PLATE, STRUCTURAL, AI
Solicitation # SPE4A5-26-T-331U
The contract is for the procurement of 18 units of a structural plate designated as P/N 901-031-171-140 with NSN 1560-01-595-9330, classified as a Critical Application Item under the Boeing Company. Delivery is required within 170 days to the destination specified as DLA Distribution San Diego, with FOB Origin terms and zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-129 for marking and labeling, with hazardous materials subject to TQ requirement IP025 per FED-STD-313 and non-hazardous items to ASTM D3951, though all DLA Master List requirements supersede ASTM standards. Packaging and palletization must meet DLA’s RP001 requirements, and sampling for quality verification follows MIL-STD-1916 or ASQ Z1.4 with zero non-conformances required unless otherwise stipulated, with critical, major, and unspecified attributes assigned verification levels or AQLs of VII/0.1, IV/1.0, and II/4.0 respectively. The supplier must comply with DLA’s technical and quality requirements referenced by R and I numbers from the official DLA Master List, and implement CMMC Level 2 self-assessment for cybersecurity. Government identification must be removed from non-accepted supplies, and the unit of issue is each (EA). The contract was solicited under SPE4A5-26-T-331U with a response deadline in August 2026 and a required delivery date of September 28, 2027, though a ship date of January 31, 2027, has been noted.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332911
New
DIBBS
VALVE, BUTTERFLY
Solicitation # SPE4A5-26-T-331T
The contract is for a single butterfly valve identified by NSN 4820-01-104-9226 and part number 397964-1-3, supplied by Honeywell International Inc. under solicitation SPE4A5-26-T-331T, with a required delivery within 170 days of award and a final delivery date of March 3, 2028. The valve is classified as a critical application item and must comply with all technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which supersede any other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with all items labeled and palletized accordingly, while removal of government identification from non-accepted supplies and physical marking of bare items are mandatory. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively. Cybersecurity Maturity Model Certification Level 2 self-assessment is required, and unit of issue is each (EA) with no variance allowed in quantity. Delivery is FOB origin to Corpus Christi, Texas, with inspection and acceptance occurring at destination. The contract mandates compliance with Defense Federal Acquisition Regulation Supplement (DFARS) provisions and includes specific transportation instructions under DLAD Proc Notes C19 and C20. All documentation and certifications must reflect current DLA policies effective on the solicitation issue date or award date, whichever governs.
Industrial Valve Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332439
New
DIBBS
SHIM
Solicitation # SPE4A5-26-T-331R
The contract specifies the procurement of a commercial item, a shim identified by part number 2664022-009 and NSN 5365012243742, with a quantity of three units to be delivered within five days of contract award. Delivery is FOB origin, with inspection and acceptance points set at the destination, and no variance in quantity is permitted. Packaging must comply with MIL-STD-2073-1E, with specific preparation methods and materials outlined, and marking must adhere to MIL-STD-129 with no special marking required. Palletization follows DLA packaging requirements, and shipment must be sent by the fastest traceable means, explicitly excluding parcel post. The delivery address is Tinker Air Force Base, Oklahoma, with a designated receiving point and contact information provided for government logistics coordination. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with revisions tied to the solicitation or award date depending on acquisition size. Sampling procedures follow MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required in sampling unless otherwise stated. Unit of issue is each (EA), and the item is not subject to Item Unique Identification under DFARS 252.211-7003(c)(1)(i) due to service customer request. The solicitation number is SPE4A5-26-T-331R, with a response deadline of August 13, 2026, and an original required delivery date of July 31, 2026. Contract administration and point of contact are managed by the Department of Defense’s ASC Supplier Oper OEM Division, with Jessica Baake as the primary liaison.
Other Metal Container Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334417
New
DIBBS
ADAPTER, CONNECTOR
Solicitation # SPE4A5-26-T-330U
This contract specifies the procurement of an adapter connector with part number 30-269-2P20F07 and NSN 5935-01-466-6841, for a quantity of five units to be delivered FOB origin within 170 days, with a required ship date of January 31, 2027, and an original delivery deadline of April 20, 2028. The contract enforces strict compliance with DLA packaging requirements, MIL-STD-2073-1E for preparation, and MIL-STD-129 for marking, with no special marking required. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise defined, with verification levels of VII, IV, and II assigned to critical, major, and minor attributes respectively; unspecified attributes are treated as major. The product is classified as a critical application item and must meet all technical and quality requirements listed in the DLA Master List, incorporating referenced R and I numbers. Cybersecurity compliance requires a CMMC Level 2 self-assessment. The item is subject to configuration change management procedures, variance requests, and removal of government identification from non-accepted supplies. Physical identification and bare item marking are mandatory per RQ017. Delivery is to be made to DLA Distribution San Joaquin at Tracy, California, with no quantity variance permitted. Transportation instructions align with DLAD Proc Notes C19 and C20, and all documentation must adhere to the contract’s unit of issue and sourcing standards.
Electronic Connector Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335139
New
DIBBS
LAMP, INCANDESCENT
Solicitation # SPE4A5-26-T-331M
This contract specifies the procurement of 161 incandescent lamps identified by NSN 6240016715328 and part number 767 from General Electric Company DBA GE, with delivery required within 21 days to Industries of the Blind Inc in Greensboro, NC. The item is classified as a commercial off-the-shelf (COTS) product and is designated as a critical application item, subject to strict technical and quality standards. All requirements referenced in the DLA Master List of Technical and Quality Requirements, including packaging, preservation, marking, and traceability, must be strictly followed per DLA directives. Supply chain traceability documentation must be retained by the contractor in compliance with DLAD Procurement Note C03 from August 2016. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with special fragile labeling and palletization meeting DLA packaging guidelines. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under sampling standards such as MIL-STD-1916 or ASQ H1331, unless otherwise specified. The contract mandates FAA airworthiness approval and bare item marking compliance, with additional quality controls governed by Reference QAP 13873. The unit of issue is each (EA), priced at $161.00 for a total contract value of $25,921.00, with no quantity variance allowed. Delivery is FOB origin, and transportation protocols must follow DLA Procurement Notes C19 and C20. The government has explicitly deemed surplus material unacceptable for this NSN, and the item requires full compliance with all federal aviation and defense procurement regulations.
Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details